Plesk 11.x / Linux :: CentOS 6 - Host Name Must Resolve To Correct IP Address Of Server

Feb 15, 2015

I have a fresh server running CentOS 6 (final). I am trying to install Plesk 11.5.30 but i am experiencing some problems. When i run the plesk-installer i get this message:

Your host name must resolve to the correct IP address of your server, unless you are using network address translation (NAT).

Please quit Parallels Installer, fix the host name resolution problem, and then try installing again.

You can skip the hostname check and continue the installation, however, in such a case, the installer cannot guarantee successful installation.

Now, in my /etc/hosts file i have this:

127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6

Is this correct? Or do i need to add/change something else?

My server is in the clound.

View 3 Replies


ADVERTISEMENT

Error :: Failed To Resolve Master Server Address, Aborting

Aug 29, 2008

i am having a problem getting a dedicated server running for Unreal Tournament GOTY. everytime i create a dedicated server i get this error in the console:

Log: AInternetLink Resolve failed: Can't find host master.mplayer.com (WSANO_DATA)
ScriptLog: UdpServerUplink: Failed to resolve master server address, aborting.

im running through a router.

View 4 Replies View Related

Plesk 12.x / Linux :: IP - Domain Not Resolve On Browser

Jul 13, 2015

Apply an IP fix to a specific domain but this domain dont resolve on browser [URL] .....

On chrome i got this : ERR_NETWORK_ACCESS_DENIED

I already disable iptabes and denyhosts

I check on dnsstuff and everything seems good.

I check ifcfg-eth0 file - ok

IP its add into Plesk panel by ToolSetings -ok

Its set on domain by Hosting parameters -ok

Reverse on IP is ok ....

View 3 Replies View Related

Plesk 11.x / Linux :: Domain Name Resolve Ipv6 But Not Ipv4

Jul 23, 2014

I added a AAAA ipv6 zone to my dns the idea was to run the SPF validation by google (who checked the ipv6 and not ipv4 (??) )Out today I have a client who called me and because it can no longer connect to my site...I take his computer in hand by teamviewer and actually the ping of my domain solves the ipv6 not ipv4 in the management of IP in plesk I

Mask IP address subnet Retailer Sites Interface
178.xx.xxx.xxx (shared) 255.255.255.0 eth0 0187
2001: xxxx: x: xxxx :: 1 (dedicated) 64 0 0 eth0

therefore 187 sites under the ipv4 and ipv6 0 on..I actually do not care about ipv6, it's just for spf..I lack some knowledge with dns I think...must I do something on dns to indicate that ipv4 is that actually hosts the site? or at plesk for all requests to be redirected to the ipv6 on ipv4?

View 3 Replies View Related

Plesk 11.x / Linux :: Scheduled Tasks - Correct Permissions

Jun 2, 2014

I have the following command to execute every 5 minutes this PHP file which is working correctly:

/usr/bin/wget -qq -O /dev/null http://url.com/script.php

How can I make it so only the system (scheduled task or the server itself) can access to the file to execute it. I tried placing CHMOD 700 to the PHP file but everyone is still able to access to it and executive it.

Plesk version: 11.5.30 Update #44

View 2 Replies View Related

Plesk 12.x / Linux :: Migrating Backups In Correct Directory Structure

May 28, 2015

I'm migrating sites from Plesk 9 to Plesk 12 using the migration manager. Since the migration manager doesn't migrate backups, are the backups compatible between Plesk 9 and Plesk 12? If so, is there an easy way to copy the backups in the correct directory structure since we are forced to use clients in plesk 12 and it changes the directory structure of the backups folders.

View 2 Replies View Related

Plesk 12.x / Linux :: How To Protect VPS Server Centos 6 64 Bit

Jul 4, 2014

how to protect Linux Server from Ddos Attack (Botnet, Loic)

View 2 Replies View Related

Plesk 12.x / Linux :: How To Install CentOS 7 On 1&1 Virtual Server

Apr 1, 2015

I want to update CentOS from:

Code:
Version Parallels Plesk v12.0.18_build1200140606.15 os_CentOS 6
OS CentOS 6.6 (Final)
to CentOS 7.

What steps I need to do to install CentOS 7?

View 4 Replies View Related

Plesk 12.x / Linux :: Backup CentOS Server File Directory

Feb 25, 2015

Which protocol I should use for performing a backup of important server files and folders. I do make a snapshot but i found that's not enough.

My Centos 6.6 has ProFTPD configuration setup only for webhosts so no root access. I came across SCP, but don't know how to secure that like a Pro. I have also heard about SSHFS for linux.

View 1 Replies View Related

Plesk 11.x / Linux :: DDOS Or High CPU Load Dedicated CentOS Server

May 12, 2014

I have been trying to identify why mi server has high load cpu, suddenly CPU load suddenly jumps, from 1 to 40 and until 110

If I restart mysqld and apache, the cpu gets back to normal, until this happen again

My server is
GenuineIntel, Intel(R)Core(TM) i5-2400 CPU @ 3.10GHz
VersionParallels Plesk Panel v11.0.9_build110120608.16 os_CentOS 6
CentOS 6.4 (Final)
CentOS 6 x64 Processor: Intel Core i5 - 3.10 GH

I already installed FAIL2BAN and DDOS DEFLATE without lock. I have CloudFlare Enabled.

When there is a high CPU load, I have checked netstats, and I don't identify many ips connected, so I think it could be an internet script (or virus).

I will paste the result of
ps fax
command, in a moment of high cpu load

View 7 Replies View Related

Plesk 12.x / Linux :: Brand New CentOS 6.5 Server Running 12.0.18 Crashing Randomly

Aug 19, 2014

I have a brand new A8i server from 1&1 that has crashed twice today and could only be rebooted through the 1&1 control panel (not Plesk). Out of the blue the server is not accessible from the Plesk CP and is not responding to pings. I have looked through the logs and do not see anything that stands out (I am not very Linux savvy). Is there somewhere specific that I can look that would tell me why it is locking up/crashing? I have only had the server about 2 weeks and am only running email on it (no websites besides webmail and Plesk CP). It is possible that there is a hardware issue, but I cannot have 1&1 check it until after hours tonight.

Server is an 8 core Intel Atom 2.6GHz with 8GB RAM.

View 8 Replies View Related

Plesk 12.x / Linux :: Start Bing DNS Server CentOS 7 - Unable To Make Action

Mar 7, 2015

I have a issue when i try to start the DNS bing server over my vps with Centos 7 and plesk 12 its shows me this error

Error: Unable to make action: Unable to manage service by dnsmng: Empty error message from utility. ('--start', 'dns')

View 1 Replies View Related

Plesk 12.x / Linux :: CentOS 7 - Hard Disk Quota Is Not Supported Due To Configuration Of Server File System

Feb 25, 2015

I have a new CentOS 7, with Plesk 12, CentOS 7 by default has XFS filesystem.

I try migrate sites from another Plesk Server but Plesk agent say: "hard disk quota is not supported due to configuration of server file system" (my CentOS 7)

My CentOS7:

CentOS Linux 7.0.1406 64 bits
Plesk 12.0.36

My fstab

[root@ns ~]$ cat /etc/fstab
/dev/mapper/centos-root / xfs defaults,usrquota,grpquota 1 1
UUID=ba391bd5-786c-4ae7-8bbd-f36f831ae6eb /boot xfs defaults 1 2
/dev/mapper/centos-swap swap swap defaults 0 0

I added "usrquota,grpquota", then mount -o remount / ; but when I try quotacheck -fmv / I gest this:

[root@ns ~]$ quotacheck -fmv /
quotacheck: Skipping /dev/mapper/centos-root [/]
quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.

but quotaon command works:

[root@ns ~]$ quotaon /
quotaon: Enforcing group quota already on /dev/mapper/centos-root
quotaon: Enforcing user quota already on /dev/mapper/centos-root

The problem here is why Plesk does not recognize quotas as enabled on CentOS 7??

If I try this command it seems good:

[root@ns ~]$ /usr/local/psa/admin/sbin/usermng --isquotable
0

Also I do this:

- Disabled Selinux
- Check all packages as quota, etc.

I have been using some reference: [URL] ....

View 11 Replies View Related

Plesk 12.x / Linux :: Unable To Configure Web Server On Host XXX

Jul 13, 2014

I'm getting this error ....

Code: Unable to generate the web server configuration file on the host <xxx> because of the following errors:

Template_Exception: apache2: bad user name <username>

file: /opt/psa/admin/plib/Template/Writer/Webserver/Abstract.php
line: 75
code: 0

Please resolve the errors in web server configuration templates and generate the file again.

<username> once was a user existing on the server. But I removed the user some days ago.

Since this morning I cannot reconfigure my web server. This always stops with the error message from above.

Unfortunately there is no clue, where the error could be located. The Abstract.php is crypted, so I am not able to check the where the problem is...

View 4 Replies View Related

Correct Procedure For Migrating Email Accounts From One Host To Another

May 11, 2007

I have a client who will be pointing their domain to my reseller server. I have already setup the account on my server and made the appropriate DNS changes with their domain registrar - so the domain should be pointing to my server soon.

However, what is the normal procedure for migrating email accounts, without loosing mail?

When should they change email account settings?

Should they use their current settings until they get an error, or no longer receive mail, then change settings to match my server?

How is this normally done?

View 4 Replies View Related

Plesk 11.x / Linux :: Unable To Generate Web Server Configuration File On Host

Jun 25, 2014

version: Parallels Plesk Panel v11.5.30_build115130819.13
os: centos 6.5 (final)

I recently received this messsage from in my mailbox "Unable to generate the web server configuration file on the host <nsxxxxxxx.ovh.net>" which is coming now every hour for 4 days now.

I first tried to regenerate an apache conf file with the magic on my Centos 6:

# /usr/local/psa/admin/sbin/httpdmng --reconfigure-all

but it gives me this output:

Execution failed.
Command: httpdmng
Arguments: Array
(
[0] => --reconfigure-server
[1] => -no-restart

[Code] .....

At line 10 in my server.conf file I have a bunch of ipv6 address that looks like this:

NameVirtualHost xx.xx.x.xx:80
NameVirtualHost [xxxx:xxxx:8:5b11::1000]:80
NameVirtualHost [xxxx:xxxx:8:5b11::1001]:80
NameVirtualHost [xxxx:xxxx:8:5b11::1002]:80

[Code] ....

View 2 Replies View Related

Plesk 12.x / Linux :: Unable To Generate Web Server Configuration File On Host

Jul 28, 2014

After the last update, I get this error:

Unable to generate the web server configuration file on the host <xxx.de> because of the following errors:

Template_Exception: nginx: [emerg] PEM_read_bio_X509_AUX("/usr/local/psa/var/certificates/certRHXRsQy") failed (SSL: error:0906D064EM routinesEM_read_bio:bad base64 decode)
nginx: configuration file /etc/nginx/nginx.conf test failed

file: /usr/local/psa/admin/plib/Template/Writer/Webserver/Abstract.php
line: 75
code: 0

Please resolve the errors in web server configuration templates and generate the file again.

the websites of my customer are not reachable now....

View 2 Replies View Related

Apache :: How To Use Virtual Host IP Address In Request To Remote Address

Feb 6, 2015

My customer has an external facing Apache server that is acting as a reverse proxy to two internal applications. They have:

- external addresses for each app which resolve to different ip addresses, so app1.their_domain.com and app2.their_domain.com resolve to 77.3.170.10 and 77.3.170.11 respectively.
- the Apache server has two network interfaces with ip addresses 192.168.10.10 and 192.168.10.11
- the external ip addresses resolve to the above internal addresses
- the firewall between the Apache server and the internal app servers is configured to allow traffic from 192.168.10.10 to reach app_server1, and traffic from 192.168.10.11 to reach app_server2, both using port 7777.

I have configured a virtual host in httpd.conf for each ip, i.e.

Code:

<VirtualHost 192.168.10.10:80>
...
ProxyPass /app http://app_server1:7777/app
ProxyPassReverse /app http://app_server1:7777/app
RewriteRule ^/$ /app/app1 [R,L]
...
<VirtualHost>

and

Code:

<VirtualHost 192.168.10.11:80>
...
ProxyPass /app http://app_server2:7777/app
ProxyPassReverse /app http://app_server2:7777/app
RewriteRule ^/$ /app/app2 [R,L]
...
<VirtualHost>

This works fine in that the external address are being routed to the correct application, however the firewall is blocking requests to the second app as it appears the requests are coming from the Apache servers 'primary' ip address 192.168.10.10 instead of 192.168.10.11.

Is it possible to send requests using the ip address from the relevant VirtualHost?

Windows server 2008
Apache 2.2

View 1 Replies View Related

Plesk 12.x / Linux :: Installing Mcrypt On Linux Centos 5.5 PHP 5.3.3

Jun 20, 2014

I am trying to install Magento on my apache server. I am running into the dreaded mcrypt issue as Magento needs it to run. I have now been googling for the past few hours and have gotten nowhere.

Here are my details:

Linux
Centos 5.5
PHP 5.3.3
x86_64
Plesk 12

I have tried installing all sorts of different repos and it just isn't working.

When I try to install using # yum install php-mcrypt I get the following:

Loaded plugins: fastestmirror
Package php-mysql is obsoleted by php-mysqlnd, trying to install php-mysqlnd-5.5.13-3.el5.remi.x86_64 instead
--> Processing Dependency: php53-gd for package: psa-php53-configurator
--> Processing Dependency: php53-imap for package: psa-php53-configurator

[Code].....

View 6 Replies View Related

Plesk 12.x / Linux :: Ban Mail By IP Address?

Aug 13, 2014

Is it possible to ban mail from a specific IP address using Plesk 12?

View 1 Replies View Related

Plesk 12.x / Linux :: New Email Address With NO Mailbox

Jun 20, 2014

Since upgrading to 12.0.18 Update #5 i have picked up a strange problem when creating a new email account.

When I try setup and new email account on any domain, I get teh following error message.

Code:

Error: mailmng-outgoing failed: ERROR:outgoing:mails.domain_id may not be NULL

If i click OK, I get the following error message

The specified email address is already in use.

I have to click cancel to return to the email address list, which shows the new email address with NO mailbox.

I then have to open the email address and check the Mailbox option to activate it.

Now the email account is configured correctly.

View 5 Replies View Related

Plesk 12.x / Linux :: Allow Incoming Emails Only From One IP Address?

Apr 21, 2015

On my plesk server, i have several emails account. These email addresses should receive only emails send by a specific server. But for now, they can receive any email, including spam.

So, i would like to block all emails that are not coming from the allowed server.

How can i do this in plesk ? As i am not a very good server admin, can you tell me exactly what i need to do in plesk?

View 3 Replies View Related

Plesk 12.x / Linux :: Email Address Uses - How To Change

May 29, 2015

I've looked a good amount of time trying to change/find where its stored. I've looked in var/qmail and there is no alias folder..We're running postfix/dovecot ....

View 4 Replies View Related

Plesk 12.x / Linux :: Completely Free Up One IP Address / Is It Possible

Oct 16, 2014

Is there any way to forbid plesk panel to use one of the IP addresses?If I remove address from panel - it has removed physically from network interface. I want to keep this IP address on network interface, but not let plesk panel use this address in all config files (nginx. apache, ssl etc.)

I want to use standard ports (443 and 80) on this IP address with some custom program not related to plesk panel and web servers. But now Plesk binds all available IP addresses to it services by default.

View 1 Replies View Related

Plesk 12.x / Linux :: VPS Hosting - Using Different IP Address In Each Domain

Jun 18, 2015

I've a vps hosting with several domains as you can see

I have to install several SSL certificates and the provider indicates me I must use different IP address in each domain, but I don't know how to do that.

I have several IPs

But all the domains are associated with the first IP, and I can't disassociate one domain and associate it to other IP.

Only when I go to settings for the hosting, I can change the IP, but it's the IP of the hosting, not the IP for one domain.

View 1 Replies View Related

Plesk 11.x / Linux :: Setting Up SSL On CentOS With SNI

Jan 31, 2015

I've searched the web to set up ssl on 1 domain of 2 installed op 1 ip address. It seems easy: setup virtual hosts, turn ssl on and point to your certificates.

I'm completely lost. I setup the certificate from geotrust in plesk panel 11.5 as described in the manual but that didn't work, apparently because i have 2 domains and 1 ip.

So i started looking to adapt my vhost settings to use sni. First problem: i can't find the setting of the virtual host.

Secondly where can i find the path to the .key and .crt files.

How i can install a ssl certificate on one of the two domains sharing 1 ip.

View 13 Replies View Related

Plesk 12.x / Linux :: How To Upgrade To PHP 5.4 On CentOS 6

Feb 8, 2015

How to upgrade PHP to PHP 5.4 on CentOS 6 ?

View 4 Replies View Related

Plesk 11.x / Linux :: How To Block Mail From Specific Address

May 19, 2014

I'm trying to use spamfilter to block mail from specific address, adding this e-mail to spamfilter in mail account settings, but it doesn't work. In logs I see:

spamc[13430]: skipped message, greater than max message size (256000 bytes).

View 8 Replies View Related

Plesk 11.x / Linux :: Recipient Address Rejected Email

Jan 18, 2015

I have some email problem

CentOS 6.6 (Final)
Plesk version12.0.18 Update #29, last updated at Dec 22, 2014 03:39 AM

When sent mail to all @nblobe.com I got smtp 550 rejected

See log below:

Jan 18 10:55:12 server2 postfix/smtpd[3498]: NOQUEUE: reject: RCPT from localhost[::1]: 550 5.1.1 <jcree@nblobe.com>: Recipient address rejected: User unknown in virtual mailbox
table; from=<mail@server2.888.com> to=<jcree@nblobe.com> proto=ESMTP helo=<webmail.server2.888.com>

From webmail.nblobe.com I can send mail but they do not delivered, but I can receive mail...

View 2 Replies View Related

Plesk 12.x / Linux :: Change SSL Cert Assigned To IP Address

May 4, 2015

I changed the default certificate (I added the certificate and marked as Default in Server->SSL Certificates).Also I assigned the SSL certificate to my domain.

This works fine, but now I'm trying to make the website PCI Compliant and their test shows that if you request the certificate from the ip address (instead of using the domain) it showns the Parallels self signed certificate instead os showing the default certificate i uploaded). I used also ssltools.websecurity.symantec.com tool and it shows the same. How to change the certificate shown for the one I bought?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved