When copy a database, plesk would copy it but hung at creating the db user, therefore, the database cloning message keeps on showing
Cloning the database xxxxxx to the database xxxxx. You will be notified of the progress by email (xxxxxxx).
*I checked if the database was copied, it showed it did but the user was not created for that newly copied one.
I am trying to find an application that can listen on a given UDP port, say "6271" and forward all traffic (UDP) sent to that port to another IP (not on the same subnet).
I should not call this forwarding, but instead, cloning (because forwarding usually is only on the same subnet or vlan). The packets should not be modified, (thus IP information in packet ect.)
Is this possible? I have tried some applications such as,
samplicator
I have a problem with e-mail management. I have 4 subscriptions and for 3 of them I do not have problem.
For one of them, mail tab not showing. Obviously I check the checkbox "Enable mail management functions in Panel"...
I have a domain that has a ton of alias domains in my panel.
If I get it to show "All" entries per page, change it to "Active List", and get back to "Classic List", they show up correctly.
Nevertheless, I have to do it every single time I log in to the panel.
Pagination also doesn't seem to work in 10, 25 and 100 entries if I don't do that.
That started happening after some update on version 12.
If you want to change the sign in message of SSH
you can edit "/etc/motd" ( message of the day )
When I update servers via CLI autoinstaller, I always (afair) get this mysqldump error message:
Code:
Stopping psa... * Stopping Plesk engine pool manager sw-engine-fpm
...done.
done
-- Warning: Skipping the data of table mysql.event. Specify the --events option explicitly.
mysqldump: Got error: 1049: Unknown database 'atmail' when selecting the database
===> Cumulative APS controller database (apsc) upgrade has been started.
===> Cumulative upgrade of APS controller database has been completed.
===> Cumulative Plesk database upgrade (revertable stage) has been started.
===> Preparing Plesk database upgrade (revertable stage).
===> Cumulative upgrade of Plesk database (revertable stage) has been completed.
Reading package lists...
There is no database "atmail" on any of our Plesk servers. Simple solution should be to first check if the DB exists before performing actions on it.As a bonus, perhaps it would be possible to suppress the warning about mysql.event.
I've installed PHP-FPM into Plesk 12 and it is showing as a running service. However I can't find any way of enabling it per site at all. I'm still just getting the 3 standard PHP options:
Apache module
CGI application
FastCGI application
The documentation states the option would be available on a per-site basis but it isn't.
unfortunately plesk was upgrading automatically and something goes wrong.The update is successfully installed but now I can't see all the website images...I'm running this plesk version: Plesk version12.0.18 Update #6, last updated at July 1, 2014 03:24 AM...Is there something that can I do for restoring images?
View 4 Replies View RelatedDomains are not showing up in control panel but they are working...
View 1 Replies View RelatedI had an SSL cert that is about to expire so I purchased a new one, installed it, uninstalled the soon to expire cert. Went into Tools and Settings > IP Addresses, and assigned the new certificate to the IP.
Although I deleted the old certificate, it still shows in a browser as well as when I test the domain at a SSL server testing website. The new certificate shows also in both browser and test website, but it is a secondary certificate after the soon-to-expire cert.
How do I get rid of the original certificate?
I added a new domain to an existing subscription. I added the domain website as a forward to a domain that has frame forwarding to another domain.
When I go into domains, I can see the domain, but when I open it in control panel, I cannot find the domain.
I need to completely remove it at this point, but can find nowhere to make this happen.
I was following this tutorial to resolve the 500 internal error I get when I visit webmail.example.com and it says:
Ensure that the '/var/www' is not a symlink to any other directory# ls -ld /var/www lrwxrwxrwx 1 root root 14 Oct 24 11:14 www -> /mnt/data/www/.You need to remove the symlink and change the vhosts location by using the transvhosts.pl utility: when I run the above command, it gives me this: ls -ld /var/www drwxr-xr-x 9 root root 4096 Jun 18 02:58 /var/www this means I have a symbolic link ? how can I delete it ? and if I delete it will it effect anything?
I upgraded from 10.4.4 to 11.0.9 and saw no errors in the process, everything was fine. However when I checked the sites after, all of them (including sub-domains) were showing the default domain page. All the files are still there no problem, and as a test I deleted a subdomain a recreated it and it worked fine.
I have a feeling it's something to do with IP addresses (I currently have two set up - most sites use one and about only 5 use the other) as going to the subscription and changing the IP address over to the other one then back to the original seems to make the site show up for most sites. I can't do this on all sites though - any commands to reconfigure everything and get it all back in to place?
I need to know how to configure awstats (Plesk's webstat) not to show report of downloads from a certain directory on my website.
(Plesk version 12.0.18)
I have installed an SSL certificate on my website since last saturday the 1st of May, and forced redirection to https URLs via .htaccess.
Since then, I cannot see any statistics in AWStats. All values stops after the implementation of the certificate. How can I continue to have statistics for my secured web site ?
We installed a new VPS with Centos and Plesk 12.
Domains are simply not showing in the controlpanel. We can see the subscriptions but its empty under the button 'Domains'. Newly created sites as well as migrated sites do not show.
Before we created or migrated a site to the server we changed psa.conf HTTPD_VHOSTS_D /home/httpd/vhosts
This is a legacy from our old servers and never has been a problem. I suppose this is not related, but just thought I should mention it.
The second problem with this server is that when we toggle the mailservice in 'Services management' the button reacts but does not change the state of qmail. It just keeps running. What can be wrong with this fresh installation?
I have a problem with webmail (horde). Horde Webmail show the wrong time, 2 hours to late. It look like that horde show the UTC time, but not the CEST "Europe/Berlin" of my server. I can change that over "preferences" -> "global preferences" -> "locale and time" and change "Your current time zone" from "Default" to "Europe/Berlin". This will now show the correct time (timezone), but this is not the solution because this will do all webmail users.
How can i change the default timezone in Horde?
Output from shell
#my timezone and this will show in all things but not in webmail horde
[root@www /]# date
Fr 11. Jul 17:32:14 CEST 2014
#this time look like the default time in horde
[root@www /]# date -u
Fr 11. Jul 15:33:31 UTC 2014
When I try to create an email address with this command
./mail --create test@domain.com -passwd dommage -mailbox false -manage-spamfilter true -redirect true -rediraddr stevefigueras@yahoo.fr
i get this message error and i don't understand why
-bash: ./mail: No such file or directory
I am getting the following error message when I try to migrate sites from an old server to a new server.:
PHP Notice: Trying to get property of non-object; File: /usr/local/psa/admin/plib/backup/Conflicts/PleskDataManager.php, Line: 173
PHP Notice: Undefined index: 192.168.100.25; File: /usr/local/psa/admin/plib/backup/Conflicts/PleskDataManager.php, Line: 180
[Code] ....
Is it possible to get Plesk working with different bounce message templates? I'd like to make messages in my Polish language to make people know what the bounce problem is. How can I make plesk not to overwrite the main.cf and bounce directive ?
View 2 Replies View RelatedI have a question regarding greylisting.
I activated greylisting on my mailserver and took a look in the logfiles.
The mail are temporary rejected with the following log message / statuscode:
451 4.7.1 Service unavailable - try again later;
Mails from my server to other servers are greylisted with messages like:
451 4.7.1 message delayed, see http://www.greylisting.org ;
452 Greylisted. Please try again after some time.
451 4.7.1 <E-MAIL-ADRESSE>: Sender address rejected: Greylisting in action. Please try again later.
Is it possible to change this log message at my server?
Mail Statistic not working, In /var/log/maillog contains below logs:The limit on the number of allowed outgoing messages was exceeded. Try again later.
But on Home
>
Tools & Settings
>
Outgoing Mail Control
Attempts to send mail per hour (except the current hour):
Statistics are being calculated.Count statistic not working, it not show any infomation abount mail attempt sending. !When i check ./mailserver -i options
POP3 authorization: off
SMTP authorization: on
Maximum letter size: 20971520
Relaying: auth
Check the passwords in the dictionary: on
Enable MAPS spam protection: off
MAPS zones: b.barracudacentral.org;zen.spamhaus.org
Short POP3/IMAP mail account names: off
The maximum number of connections (IMAP, POP3, IMAP over SSL, or POP3 over SSL).: 1024
[code]....
Show the alert on the Home page about attempts to exceed limits based on statistics for the last: P1DSend a notification about attempts to exceed limits on outgoing mail every: PT15M
My plesk 12 is working, but one subscription doest show, or any of the domains.
Doing some digging got to this:
[root@server src]# /usr/local/psa/bin/sw-engine-pleskrun check_db_integrity-beta.php
PHP Notice: Undefined variable: PLESK_DB_HOST in /usr/local/src/check_db_integrity-beta.php on line 240
List of records in [psa.domains.cl_id] that miss a matching record in [psa.clients.id]
0
List of records in [psa.dom_level_usrs.dom_id] that miss a matching record in [psa.domains.id]
27, 32, 36, 43, 61, 83, 86
[Code] ....
ERROR: Table "smb_apsImportedResources" is not found in database "psa"!
ERROR: Table "smb_apsImportedResources" is not found in database "psa"!
List of records in [psa.domains.webspace_id, cl_id WHERE webspace_id<>0] that miss a matching record in [psa.domains.id, cl_id WHERE webspace_id=0]
20:1, 52:1, 52:1, 52:1, 68:1
How can i change the content of the bounce email?
I'm using Postfix 2.7.1 on Debian 6 with Plesk 11.0.9.
Currently the text of a bounce mail shows:
This is the mail system at host example.org.
Your message could not be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster. If you do so, please include this problem report. You can delete your own text from the attached returned message.
The mail system
<_plesk_bounce_example.org@localhost.localdomain> (expanded from
<ttt@example.org>): This address no longer accepts mail.
And I'd like to get rid of address <_plesk_bounce_example.org@localhost.localdomain>.
I added the bouce file template to Postfix's config by:
postconf -e 'bounce_file_template = /etc/postfix/bounce.cf'
Restarted postfix.
Config related to bounces:
Code:
~ # postconf | grep bounce
2bounce_notice_recipient = postmaster
address_verify_sender = $double_bounce_sender
backwards_bounce_logfile_compatibility = yes
bounce_notice_recipient = postmaster
[Code] ....
Well, where can i change the template for bounces, now?
Since the last update I am having constant troubles with email accounts when sending or replying to email messages.
This is the message I am getting:-
"error sending your message: Service unavailable - try again later"
This is our system and the software is the Parellels with Business Manager and stuff.
OS CentOS 6.5 (Final)
Plesk version 12.0.18 Update #10, last updated at Aug 4, 2014 05:00 AM
The system is up-to-date; last checked at Aug 3, 2014 04:44 AM
This is what the error looks like in the log file located at /usr/local/psa/var/log/maillog
Aug 6 11:54:08 host spamd[28992]: spamd: connection from localhost [127.0.0.1] at port 37548
Aug 6 11:54:08 host spamd[14212]: prefork: child states: II
Aug 6 11:54:08 host courier-imapd: Connection, ip=[::ffff:127.0.0.1]
Aug 6 11:54:08 host courier-imapd: LOGOUT, ip=[::ffff:127.0.0.1], rcvd=12, sent=365
[Code] ....
I'm using Plesk 11 in a Ubuntu 12.04 Linux environment on a remote dedicated server. I am NOT trying to upgrade to Plesk 12. But, every time I log onto the panel, I get the error message shown on the subject line. Afterward, it says, "To solve this problem, send an update log to Parallels support." I have the update log ... but "where" to send it. Is there an email address? A webpage?
View 10 Replies View RelatedI just discovered there is seperate error log for php-fpm and since only 1 site is running fully nginx, the log is full with this error:
"NOTICE: PHP message: PHP Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/lib/php/session) in Unknown on line 0"
I've checked and the path is correct....
we regularly get this message in boxmail of adress used to send email from server.This is the mail system at host DOMAIN.fr. You can delete your own text from the attached returned message.The mail system
<1@SERVERNAME.HOSTER.com> (expanded from <1>): User unknown in virtual
alias table
If i look in maillog i see that :
May 18 16:48:52 SERVERNAME postfix/error[22737]: F22521B4E45: to=<1@SERVERNAME.HOSTER.com>, orig_to=<1>, relay=none, delay=0.07, delays=0.04/0.01/0/0.02, dsn=5.0.0, status=bounced (User unknown in virtual alias table)
Just after that we can see email go normally :
May 18 16:48:59 SERVERNAME postfix/smtp[22736]: F22521B4E45: to=<EMAIL@DOMAIN.com>, relay=mx3.mail.icloud.com[17.158.8.50]:25, delay=7.3, delays=0.04/0.03/2.4/4.8, dsn=2.5.0, status=sent (250 2.5.0 Ok.)
The problem is in error message (at top) the message attached is the one sent to EMAIL@DOMAIN.com. So we can think the message is not sent to EMAIL@DOMAIN.com. SERVERNAME, HOSTER and EMAIL@DOMAIN are here to mask real data.
OS: Debian 7.7
Plesk version: 12.0.18 Update #46
I attempted to install Zen Cart in a (correctly formed) subdomain and I received this message when the process crashed before beginning: "Non-zero exit status returned by script."
View 1 Replies View RelatedBandwidth limitation button not showing in domain control panel
I am running Plesk 12.018 on CentOS 6.5. with ~75 domains hosted. All of them are allowed unlimited traffic and have Apache + Nginx installed and configured via Plesk.
Today I need for the first time to set a bandwidth-limitation for a domain, but I can't find a button for controlling it in the domain control panel.
I've checked I've mod_bw installed and have set the permissions for controlling server performance in the custom plan for the specific domain.
