Plesk 11.x / Linux :: Domains Are Not Showing Up In Control Panel
Dec 8, 2014Domains are not showing up in control panel but they are working...
View 1 Replies
ADVERTISEMENT
Plesk 12.x / Linux :: PHP-FPM Installed But Not Showing Anywhere In Control Panel
Apr 8, 2015I've installed PHP-FPM into Plesk 12 and it is showing as a running service. However I can't find any way of enabling it per site at all. I'm still just getting the 3 standard PHP options:
Apache module
CGI application
FastCGI application
The documentation states the option would be available on a per-site basis but it isn't.
Plesk 12.x / Linux :: Domain Not Showing Up In Control Panel
Jul 4, 2015I added a new domain to an existing subscription. I added the domain website as a forward to a domain that has frame forwarding to another domain.
When I go into domains, I can see the domain, but when I open it in control panel, I cannot find the domain.
I need to completely remove it at this point, but can find nowhere to make this happen.
Plesk 12.x / Linux :: Mail Statistic Not Working Or Showing Anything On Control Panel
Sep 11, 2014Mail Statistic not working, In /var/log/maillog contains below logs:The limit on the number of allowed outgoing messages was exceeded. Try again later.
But on Home
>
Tools & Settings
>
Outgoing Mail Control
Attempts to send mail per hour (except the current hour):
Statistics are being calculated.Count statistic not working, it not show any infomation abount mail attempt sending. !When i check ./mailserver -i options
POP3 authorization: off
SMTP authorization: on
Maximum letter size: 20971520
Relaying: auth
Check the passwords in the dictionary: on
Enable MAPS spam protection: off
MAPS zones: b.barracudacentral.org;zen.spamhaus.org
Short POP3/IMAP mail account names: off
The maximum number of connections (IMAP, POP3, IMAP over SSL, or POP3 over SSL).: 1024
[code]....
Show the alert on the Home page about attempts to exceed limits based on statistics for the last: P1DSend a notification about attempts to exceed limits on outgoing mail every: PT15M
Plesk 12.x / Linux :: Bandwidth Limitation Button Not Showing In Domain Control Panel
Jun 27, 2014Bandwidth limitation button not showing in domain control panel
I am running Plesk 12.018 on CentOS 6.5. with ~75 domains hosted. All of them are allowed unlimited traffic and have Apache + Nginx installed and configured via Plesk.
Today I need for the first time to set a bandwidth-limitation for a domain, but I can't find a button for controlling it in the domain control panel.
I've checked I've mod_bw installed and have set the permissions for controlling server performance in the custom plan for the specific domain.
Plesk 12.x / Linux :: Domains Not Showing - Qmail Does Not React To Panel
Sep 15, 2014We installed a new VPS with Centos and Plesk 12.
Domains are simply not showing in the controlpanel. We can see the subscriptions but its empty under the button 'Domains'. Newly created sites as well as migrated sites do not show.
Before we created or migrated a site to the server we changed psa.conf HTTPD_VHOSTS_D /home/httpd/vhosts
This is a legacy from our old servers and never has been a problem. I suppose this is not related, but just thought I should mention it.
The second problem with this server is that when we toggle the mailservice in 'Services management' the button reacts but does not change the state of qmail. It just keeps running. What can be wrong with this fresh installation?
Plesk 11.x / Linux :: Can Only See 5 Out Of 12 Domains In Control Panel
Nov 16, 2014I have 12 domains in my control panel but i only see 5 domains in my control panel but all 12 domains are working they are up but only see 5 in control panel....
View 7 Replies View RelatedFantastico Not Showing Up In RvSkins Control Panel
Jul 30, 2006I have a server with CentOS, Fantastico, and RvSkins. I have a user that for some reason, Fantastico does not show up in there control panel, which is a RvSkins theme. Does anybody have any ideas on how to get RvSkins to show Fantastico's icon in the Cpanel?
View 3 Replies View RelatedPlesk 11.x / Linux :: Can't Connect To Control Panel
Sep 10, 2014after the login page, a blank page appears and I can't access to the Plesk Control Panel :
in the file : /var/log/sw-cp-server/error_log
2014/07/09 14:45:04 [error] 7422#0: *3551 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 91.204.25.4, server: , request: "GET /admin/ HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "91.204.25.4:8443", referrer: "https://91.204.25.4:8443/"
Plesk 12.x / Linux :: One Subscription Or Any Of Domains Not Showing - Miss Matching Records
Jul 8, 2014My plesk 12 is working, but one subscription doest show, or any of the domains.
Doing some digging got to this:
[root@server src]# /usr/local/psa/bin/sw-engine-pleskrun check_db_integrity-beta.php
PHP Notice: Undefined variable: PLESK_DB_HOST in /usr/local/src/check_db_integrity-beta.php on line 240
List of records in [psa.domains.cl_id] that miss a matching record in [psa.clients.id]
0
List of records in [psa.dom_level_usrs.dom_id] that miss a matching record in [psa.domains.id]
27, 32, 36, 43, 61, 83, 86
[Code] ....
ERROR: Table "smb_apsImportedResources" is not found in database "psa"!
ERROR: Table "smb_apsImportedResources" is not found in database "psa"!
List of records in [psa.domains.webspace_id, cl_id WHERE webspace_id<>0] that miss a matching record in [psa.domains.id, cl_id WHERE webspace_id=0]
20:1, 52:1, 52:1, 52:1, 68:1
Plesk 12.x / Linux :: Control Panel Is Very Slow To Load?
Apr 17, 2015I've been having a few issues with the control panel navigation is running slow even though I have heaps of resources available and free. The server is located locally and have no problems surfing websites attached to the same server.
When I login as admin, it can take 25 seconds to load into the first screen.
CPU GenuineIntel, Intel(R) Xeon(R)CPU E5649 @ 2.53GHz
Version Parallels Plesk v12.0.18_build1200140606.15 os_CentOS 6
OS CentOS 6.6 (Final)
Memory Available 6GB used 2.5-3GB
HDD: 300GB/ approx 130GB Free
I have tried issuing a /etc/init.d/psa restart command and has made no difference.
Plesk 11.x / Linux :: Two Passwords For Admin In Control Panel?
Nov 14, 2014Why can i login with two different passwords for the user admin in plesk control panel?
View 1 Replies View RelatedPlesk 12.x / Linux :: Cannot Load Pages In Control Panel
Jul 2, 2014Plesk Panel 12.0.18 , cant load pages in controlpanel (web host edition) it is making timeout all the time and also cannot send mail (roundcube).
What have parallels done to the a nice panel!
Plesk 12.x / Linux :: Control Panel And Websites Are So Slow
Mar 26, 2015My Plesk installation and websites are slow
OVH VPS
8G ram
100 G Harddisk
Plesk 12.x / Linux :: Cannot Log Into Control Panel - Sign Out Request Is Executed
Apr 12, 2015I am unable to log into the Plesk Control Panel.
After logging in, it appears that a sign-out request is executed. No error messages are shown.
Plesk: 12_0_18
Plesk 12.x / Linux :: Cannot Access Any Websites Or Hosting Control Panel
Sep 20, 2014I have been a solid cPanel / WHM user for the past 2 years, we have now since downsized our hosting requirements and also wanted to cut our panel costs and so we moved to PLESK 12 Web Edition.The server is on a trial license and has been working fine with no problems for the past 2 weeks. Today all of a sudden none of the websites are accessible, although I can ping all IP's on server and login via SSH.I cannot access any websites or hosting control panel, I have disabled IP tables as this was the cause of a problem last time.
Why this happened was there an update at around 5AM this morning which could have caused this?I have restarted the server, I can successfully ping / resolve address from SSH.
Plesk 12.x / Linux :: Facebook Link In Control Panel Can Be Removed?
Apr 22, 2015I purchased a Host license.Major customers in China. There is a facebook link in the panel.But China does not allow access facebook. This leads to a very slow access speed! Can I remove this link? If so, how to remove?
View 1 Replies View RelatedPlesk 12.x / Linux :: How To Install Ffmpeg On Server With Control Panel
Aug 21, 2014I have server with the Plesk control panel on Linux server and want to install ffmpeg but not sure about the steps to install it. Any script or easy steps to install ffmpeg on my server.
View 1 Replies View RelatedPlesk 12.x / Linux :: Change Control Panel Url Port (8443 To 9859)?
Apr 9, 2015How change control panel url port (8443 to 9859)?
View 15 Replies View RelatedPlesk 12.x / Linux :: TLS 1.2 Only Working In Panel And Not On Domains
Sep 9, 2014I have a server which I am using for multiple clients. Some with SSL enabled, some without. I have added custom ngingx conf files for nginxDomainVirtualHost.php and nginxWebmailPartial.php in /usr/local/psa/admin/conf/templates/custom and modified the following lines to try and harden security:
Code:
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
ssl_ciphers "EECDH+ECDSA+AESGCM EECDH+aRSA+AESGCM EECDH+ECDSA+SHA384 EECDH+ECDSA+SHA256 EECDH+aRSA+SHA384 EECDH+aRSA+SHA256 EECDH+aRSA+RC4 EECDH EDH+aRSA RC4 !aNULL !eNULL !LOW !3DES !MD5 !EXP !PSK !SRP !DSS";
ssl_prefer_server_ciphers on;
After reconfiguring using
Code:
/usr/local/psa/admin/bin/httpdmng --reconfigure-all
I check in /etc/nginx/plesk.conf.d/vhosts/<domain>.conf and the changes are shown correctly there but browsers and online tools such as [URL] .... still say that the sites are using 128 bit encryption and TLS 1.0.
The Plesk admin panel itself displays 256 bit encryption and TLS 1.2.
Plesk 11.x / Linux :: Web Presence Builder Icon Is Missing From Customer Control Panel
Feb 23, 2014I am facing the following issue: Web Presence Builder icon is missing from Customer Control Panel.
I tried to apply the following solution from the knowledge base: [URL] ...., however I ended at step 2, because there is no "Sites published with Web Presence Builder" parameter in any of my Service Plans.
I am running plesk Panel 11.5.30 instead of 10.x. and step 1 tells me the parameter "Sites published with Web Presence Builder" equals 10.
Plesk 12.x / Linux :: Outgoing Mail Control On Domains Simply Doesn't Work
Mar 22, 2015Plesk 12.0.18 on CentOS 6.5 using Postfix...i have configured outgoing mail control to have a limit on a domain. I have removed all entries from the server wide white list.This setting - Allow scripts and users to use Sendmail is unchecked.However I can send any number of messages using PHP's mail() command from a PHP script on the domain.I see this in the maillog:Error during 'limit-out' handler...But the email is sent and no limit is applied.
View 7 Replies View RelatedPlesk Vs. C-Panel / Control Panel
Oct 11, 2007I indicated that I've basically been using my webhosting company as "file storage".
1) I create all my files in .html using notepad
2) My files are limited to .html, .jpg, .gif, (and a couple of .js and .css) files.
3) My domain is not connected with my webhost; I use the nameserver zoneedit.com and I use URL forwarding and mask/cloak the domain the address bar (using multiple domains) as follows:
domain1.com --> forwards to [url]
domain2.com --> forwards to [url]
domain3.com --> forwards to [url]
4) For uploading files, I go to ftp://123.456.78 and drop/drag/copy/paste files into the window using my browser
5) I'm able to password protect the subdirectories as I choose.
---------------
I called my webhost, Hostik, and told them that I was unable to do anything on my web console. I can't change a password, create a user, or even access my usage/bandwidth quotas.
They told me that I'm on an "old server" using the windows-based console (probably C-Panel / Control Panel) and they're in the process over the next three months of transfering everyone over to "Plesk".
So, they set me up with a new Plesk account, while keeping the old one in place, so that I could move/transfer my files to the Plesk account.
When I went to Plesk, I realized things are not the same:
1) In my Control Panel / C-Panel, I had a unique IP URL Address - [url]
2) In Plesk, it seems there's a set IP URL Address - [url] - that everyone shares.
3) I was told that in Plesk, many people use that IP URL address and that I'm supposed to place my files into the "httpdocs" folder.
Appearently, this is a system of shared hosting whereby many people have the same IP URL address (different from what I had before) and it recognizes each account by the login or something, so the "httpdocs" folder would identify my domain.
I was then told that in Plesk, I must have my domain affixed to the Plesk account.
In other words, I can no longer do what I was doing before, having my domain separated in another location and using URL forwarding from an outside nameserver.
--------------------------
So, my original question is what's the difference between Plesk vs. C-Panel/Control Panel?
Perhaps I answered most of it above.
Is it correct that I can't do things the way I've been doing them so far if that's the case?
It might be that Plesk is not for me and I may need to find a host that gives me my own unique IP URL Address. However, I was informed that not many companies are doing that as most are switching over to Plesk.
In addition, Hostik does not offer multiple domains.
In response to this thread, David recommended I try synhosting.com
synhosting.com has "Multiple Websites". I assume this means mulitiple domains. Correct?
What's my best option at this point?
1) Find a host that has C-Panel / Control Panel (if any there are)?
2) Use a service such as synhosting.com and move all my domains over to them?
3) If I do use synhosting.com, am I required to move my domains over to their nameservers?
4) I have my MX Mail records pointing to Fastmail.fm for my email virtual domains. Would I still be able to do this if my domain is dedicated to a webhost and opt not to use their email feature?
5) Should I get rid of this old-school thought of using my web host as "file storage" and stop this practice of using URL forwarding and cloaking?
Securing Plesk 8.1 Control Panel Question
Dec 10, 2007I asked my current vps supplier about changing the certificate used to secure the plesk control panel as the default one causes certificate warnings. Their response was "dont worry about the warnings, the control panel is secure and trying to address the error can cause problems in plesk itself".
Is this correct?, I know the cp is still secure but customers arent going to think ssl certificate warnings are OK. I think their response was more of we cant help you so dont worry about it type response (a.k.a the brush off)
Is this an issue with plesk? vps is windows server 2k3
Plesk 11.x / Windows :: Control Panel Not Accessible?
Jan 30, 2013I Have a WinServer 2008R2SP1 with plesk 11. I am able to access to PControl panel with https://localhost:8443 but not from outside the server (https://serverIP:8443)
The firewall if OK, allowing port 8443.
Plesk 12.x / Windows :: Control Panel Certificate
Oct 22, 2014Ive bought a wildcard certificate, and its working fine when i use URL....But it does not work when i go to hURL.... seems like the control panel chosing a default one for this.
Ive tried to make the certificate server default, changed the one in ip section to the wildcard one, and made the woldcard one default, nothing changed..
SPAM Filter Choices Plesk Control Panel
Apr 15, 2008switched to ipower.com and not getting any help - really stuck as my customer wanted better spam filtering so I went to them on a recommendation and I do not know how to turn on and what is the best setting for spam filtering with their panel. Also using HORDE where I can set a filter using rules but it only works if I log on and hit apply filter so my customer still gets it in his in box -
View 2 Replies View RelatedPlesk Automation :: Single Sign-On (SSO) For PPA Control Panel
Jun 7, 2014Currently we host a site constructor tool with a dedicated panel and we would like to add email hosting using PPA services.
We have already installed the system and customized the PPA panel which will be accessed by our panel.
We would like to know if it is possible to use Single Sign-On (SSO) access on some manner (with PPA API or other module), so our customers don't need to enter with user and password again to administrate their e-mail accounts.
Plesk 11.x / Windows :: Control Panel Access IIS 7.0 WIN Web Server 2K
Jun 29, 2012after upgrading to plesk 11 i get this error (Image attached)
so basicaly i cant do nothing..
Plesk 11.x / Windows :: Control Panel With Crystal Report
Jan 9, 2014I have a website works with Crystal Report, it worked with Windows server 2008 and Plesk Panel 10, now I upgrade my windows server to 2012 and plesk 11.5 and I gave this error: Server Error in '/' Application.....Please see the attached file (Error Image)
I check many things, for example I run the website on windows server 2012, just With IIS and it works fine, then I install the plesk 11.5 and take the error again.. now I sure 99% the error related to plesk....
Plesk 11.x / Windows :: Secure Webmail With SSL Through Control Panel?
Aug 20, 2014Plesk Panel for Windows 11.5
Windows 2012
MailEnable 7.5
- Is it possible to secure webmail with SSL through the Plesk Control Panel?
- Is it possible to secure webmail per domain with SSL through the Plesk Control Panel?