I'm running Plesk 12 (installed last week) on a Centos 7 box. I'm running in ISP View, and in the Interface Controls Visibility section I've checked the box for "Hide controls for rejection messages for non-existent mail addresses".
However, when I log in as a subscriber, I can still see those controls.
unfortunately plesk was upgrading automatically and something goes wrong.The update is successfully installed but now I can't see all the website images...I'm running this plesk version: Plesk version12.0.18 Update #6, last updated at July 1, 2014 03:24 AM...Is there something that can I do for restoring images?
I had an SSL cert that is about to expire so I purchased a new one, installed it, uninstalled the soon to expire cert. Went into Tools and Settings > IP Addresses, and assigned the new certificate to the IP.
Although I deleted the old certificate, it still shows in a browser as well as when I test the domain at a SSL server testing website. The new certificate shows also in both browser and test website, but it is a secondary certificate after the soon-to-expire cert.
I was following this tutorial to resolve the 500 internal error I get when I visit webmail.example.com and it says:
Ensure that the '/var/www' is not a symlink to any other directory# ls -ld /var/www lrwxrwxrwx 1 root root 14 Oct 24 11:14 www -> /mnt/data/www/.You need to remove the symlink and change the vhosts location by using the transvhosts.pl utility: when I run the above command, it gives me this: ls -ld /var/www drwxr-xr-x 9 root root 4096 Jun 18 02:58 /var/www this means I have a symbolic link ? how can I delete it ? and if I delete it will it effect anything?
I upgraded from 10.4.4 to 11.0.9 and saw no errors in the process, everything was fine. However when I checked the sites after, all of them (including sub-domains) were showing the default domain page. All the files are still there no problem, and as a test I deleted a subdomain a recreated it and it worked fine.
I have a feeling it's something to do with IP addresses (I currently have two set up - most sites use one and about only 5 use the other) as going to the subscription and changing the IP address over to the other one then back to the original seems to make the site show up for most sites. I can't do this on all sites though - any commands to reconfigure everything and get it all back in to place?
Domains are simply not showing in the controlpanel. We can see the subscriptions but its empty under the button 'Domains'. Newly created sites as well as migrated sites do not show.
Before we created or migrated a site to the server we changed psa.conf HTTPD_VHOSTS_D /home/httpd/vhosts This is a legacy from our old servers and never has been a problem. I suppose this is not related, but just thought I should mention it.
The second problem with this server is that when we toggle the mailservice in 'Services management' the button reacts but does not change the state of qmail. It just keeps running. What can be wrong with this fresh installation?
I have a problem with webmail (horde). Horde Webmail show the wrong time, 2 hours to late. It look like that horde show the UTC time, but not the CEST "Europe/Berlin" of my server. I can change that over "preferences" -> "global preferences" -> "locale and time" and change "Your current time zone" from "Default" to "Europe/Berlin". This will now show the correct time (timezone), but this is not the solution because this will do all webmail users.
How can i change the default timezone in Horde?
Output from shell
#my timezone and this will show in all things but not in webmail horde [root@www /]# date Fr 11. Jul 17:32:14 CEST 2014
#this time look like the default time in horde [root@www /]# date -u Fr 11. Jul 15:33:31 UTC 2014
Mail Statistic not working, In /var/log/maillog contains below logs:The limit on the number of allowed outgoing messages was exceeded. Try again later.
But on Home > Tools & Settings > Outgoing Mail Control
Attempts to send mail per hour (except the current hour):
Statistics are being calculated.Count statistic not working, it not show any infomation abount mail attempt sending. !When i check ./mailserver -i options
POP3 authorization: off SMTP authorization: on Maximum letter size: 20971520
Relaying: auth Check the passwords in the dictionary: on Enable MAPS spam protection: off MAPS zones: b.barracudacentral.org;zen.spamhaus.org Short POP3/IMAP mail account names: off The maximum number of connections (IMAP, POP3, IMAP over SSL, or POP3 over SSL).: 1024
Show the alert on the Home page about attempts to exceed limits based on statistics for the last: P1DSend a notification about attempts to exceed limits on outgoing mail every: PT15M
My plesk 12 is working, but one subscription doest show, or any of the domains.
Doing some digging got to this:
[root@server src]# /usr/local/psa/bin/sw-engine-pleskrun check_db_integrity-beta.php PHP Notice: Undefined variable: PLESK_DB_HOST in /usr/local/src/check_db_integrity-beta.php on line 240 List of records in [psa.domains.cl_id] that miss a matching record in [psa.clients.id] 0 List of records in [psa.dom_level_usrs.dom_id] that miss a matching record in [psa.domains.id] 27, 32, 36, 43, 61, 83, 86
ERROR: Table "smb_apsImportedResources" is not found in database "psa"! ERROR: Table "smb_apsImportedResources" is not found in database "psa"! List of records in [psa.domains.webspace_id, cl_id WHERE webspace_id<>0] that miss a matching record in [psa.domains.id, cl_id WHERE webspace_id=0] 20:1, 52:1, 52:1, 52:1, 68:1
So yesterday I tried to follow along with http://www.eth0.us/tmp to secure m /tmp folder. It broke. I have since fixed the issues (chmod 1777 and not 0777) but I still have a second tmp mount point that I can't get rid of.
/dev/tmpMnt on /tmp type ext2 (rw,noexec,nosuid,loop=/dev/loop0) tmpfs on /dev/shm type tmpfs (rw,noexec,nosuid,nodev) /tmp on /tmp type none (rw,noexec,nosuid,nodev,bind)
My Plesk Panel 11.0.9 Update #26 is running on a dedicated Debian 6.0.6 server and works all fine, but I'm having some issues with the backups. I'm doing backups using the standard build in GUI backup manager. Everything works fine, even the cron job which copies the backup files every night to a second location. The problem I'm having is, that I can't specify folders to exclude from the backup. The reason why I need this is, that I have a 24TB RAID mounted in the /var/www/vhosts/mydomain.com folder and this will be a problem once the RAID is filling up.
I'm trying to copy a backup from the FTP server to the production server but I don't have enough space in the tmp folder.
There is a way to change where the backups are temporary until the hole backup is on the server? In case the only thing to do is to change where the tmp folder is mounted. This is a production server, I won't like to do it without knowing all the steps.
the problem is very big since backup procedure not backup all files and folder. I have a lot of Wordpress installations (some of that made with App Installer and others made by hand).
Into all the above installations, files and folder created by Wordpress, like plugin installed or image, uploaded are not backup!
I have seen that all this files come with www-data:www-data user and group but with read permissions for owner, group and others, so i not able to understand why they are not inside my backups. If i change user and group all works fine.
Check your Wordpress backup and verify the presence of plugin and images (miniature of images are still present since they are created with different user and group)...
I'm having a problem when copying folders into another folder using the same name.e.g. there's a folder called css in httpdocs/backup/css and also httpdocs/css. However, I'm trying to restore the backup and actually copy the /css dir from httpdocs/backup to httpdocs. Plesk should overwrite the existing target css dir (and its content/files) in httpdocs/css. However, Plesk creates a new css dir inside httpdocs/css so I have the "original" httpdocs/css dir content intact and also the css dir (from httpdocs/backup/css) copied into httpdocs/css so the full path is httpdocs/css/css
I'm highlighting the httpdocs (not /css dir) in the File manager - Copy Files window. I've tried that on a few installs and experiencing issue on each of them. Please see the attached screenshots.
Step 1. Select (check) the css dir and click copy (or move, result is the same)
Step 2. Mark the httpdocs dir (it doesn't matter if you click the Replace existing files checkbox)
Step 3. Final result, css dir from httpdocs/backup copied into httpdocs/css/
I've compared the dir content several times and definitely the css dir from httpdocs/backup is copied to httpdocs/css so the full path would be: http docs/css/css and the original "old" files from css will remain there.
* Go to "Web Server Settings" add text to "Additional directives for HTTP" and press button "Ok". * Go to "Document root" folder of your domain and now you have a new folder "/cgi-bin/test" with file "test.cgi":
Code: #!/usr/bin/perl print <<HTML; Content-type: text/html <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">