I added a new domain to an existing subscription. I added the domain website as a forward to a domain that has frame forwarding to another domain.
When I go into domains, I can see the domain, but when I open it in control panel, I cannot find the domain.
I need to completely remove it at this point, but can find nowhere to make this happen.
Bandwidth limitation button not showing in domain control panel
I am running Plesk 12.018 on CentOS 6.5. with ~75 domains hosted. All of them are allowed unlimited traffic and have Apache + Nginx installed and configured via Plesk.
Today I need for the first time to set a bandwidth-limitation for a domain, but I can't find a button for controlling it in the domain control panel.
I've checked I've mod_bw installed and have set the permissions for controlling server performance in the custom plan for the specific domain.
I've installed PHP-FPM into Plesk 12 and it is showing as a running service. However I can't find any way of enabling it per site at all. I'm still just getting the 3 standard PHP options:
Apache module
CGI application
FastCGI application
The documentation states the option would be available on a per-site basis but it isn't.
Domains are not showing up in control panel but they are working...
View 1 Replies View RelatedMail Statistic not working, In /var/log/maillog contains below logs:The limit on the number of allowed outgoing messages was exceeded. Try again later.
But on Home
>
Tools & Settings
>
Outgoing Mail Control
Attempts to send mail per hour (except the current hour):
Statistics are being calculated.Count statistic not working, it not show any infomation abount mail attempt sending. !When i check ./mailserver -i options
POP3 authorization: off
SMTP authorization: on
Maximum letter size: 20971520
Relaying: auth
Check the passwords in the dictionary: on
Enable MAPS spam protection: off
MAPS zones: b.barracudacentral.org;zen.spamhaus.org
Short POP3/IMAP mail account names: off
The maximum number of connections (IMAP, POP3, IMAP over SSL, or POP3 over SSL).: 1024
[code]....
Show the alert on the Home page about attempts to exceed limits based on statistics for the last: P1DSend a notification about attempts to exceed limits on outgoing mail every: PT15M
I have a server with CentOS, Fantastico, and RvSkins. I have a user that for some reason, Fantastico does not show up in there control panel, which is a RvSkins theme. Does anybody have any ideas on how to get RvSkins to show Fantastico's icon in the Cpanel?
View 3 Replies View RelatedWe installed a new VPS with Centos and Plesk 12.
Domains are simply not showing in the controlpanel. We can see the subscriptions but its empty under the button 'Domains'. Newly created sites as well as migrated sites do not show.
Before we created or migrated a site to the server we changed psa.conf HTTPD_VHOSTS_D /home/httpd/vhosts
This is a legacy from our old servers and never has been a problem. I suppose this is not related, but just thought I should mention it.
The second problem with this server is that when we toggle the mailservice in 'Services management' the button reacts but does not change the state of qmail. It just keeps running. What can be wrong with this fresh installation?
after the login page, a blank page appears and I can't access to the Plesk Control Panel :
in the file : /var/log/sw-cp-server/error_log
2014/07/09 14:45:04 [error] 7422#0: *3551 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 91.204.25.4, server: , request: "GET /admin/ HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "91.204.25.4:8443", referrer: "https://91.204.25.4:8443/"
I have 12 domains in my control panel but i only see 5 domains in my control panel but all 12 domains are working they are up but only see 5 in control panel....
View 7 Replies View RelatedI've been having a few issues with the control panel navigation is running slow even though I have heaps of resources available and free. The server is located locally and have no problems surfing websites attached to the same server.
When I login as admin, it can take 25 seconds to load into the first screen.
CPU GenuineIntel, Intel(R) Xeon(R)CPU E5649 @ 2.53GHz
Version Parallels Plesk v12.0.18_build1200140606.15 os_CentOS 6
OS CentOS 6.6 (Final)
Memory Available 6GB used 2.5-3GB
HDD: 300GB/ approx 130GB Free
I have tried issuing a /etc/init.d/psa restart command and has made no difference.
Why can i login with two different passwords for the user admin in plesk control panel?
View 1 Replies View RelatedPlesk Panel 12.0.18 , cant load pages in controlpanel (web host edition) it is making timeout all the time and also cannot send mail (roundcube).
What have parallels done to the a nice panel!
My Plesk installation and websites are slow
OVH VPS
8G ram
100 G Harddisk
I am unable to log into the Plesk Control Panel.
After logging in, it appears that a sign-out request is executed. No error messages are shown.
Plesk: 12_0_18
I have been a solid cPanel / WHM user for the past 2 years, we have now since downsized our hosting requirements and also wanted to cut our panel costs and so we moved to PLESK 12 Web Edition.The server is on a trial license and has been working fine with no problems for the past 2 weeks. Today all of a sudden none of the websites are accessible, although I can ping all IP's on server and login via SSH.I cannot access any websites or hosting control panel, I have disabled IP tables as this was the cause of a problem last time.
Why this happened was there an update at around 5AM this morning which could have caused this?I have restarted the server, I can successfully ping / resolve address from SSH.
I purchased a Host license.Major customers in China. There is a facebook link in the panel.But China does not allow access facebook. This leads to a very slow access speed! Can I remove this link? If so, how to remove?
View 1 Replies View RelatedI have server with the Plesk control panel on Linux server and want to install ffmpeg but not sure about the steps to install it. Any script or easy steps to install ffmpeg on my server.
View 1 Replies View RelatedHow change control panel url port (8443 to 9859)?
View 15 Replies View RelatedI am facing the following issue: Web Presence Builder icon is missing from Customer Control Panel.
I tried to apply the following solution from the knowledge base: [URL] ...., however I ended at step 2, because there is no "Sites published with Web Presence Builder" parameter in any of my Service Plans.
I am running plesk Panel 11.5.30 instead of 10.x. and step 1 tells me the parameter "Sites published with Web Presence Builder" equals 10.
I have a domain that has a ton of alias domains in my panel.
If I get it to show "All" entries per page, change it to "Active List", and get back to "Classic List", they show up correctly.
Nevertheless, I have to do it every single time I log in to the panel.
Pagination also doesn't seem to work in 10, 25 and 100 entries if I don't do that.
That started happening after some update on version 12.
i want to know if i can add the domain to my vps without a control panel
View 4 Replies View RelatedMy VPS has no control panel.
Main domain is domain.com under /var/www/html
Now I want add a new domain domain1.com under /var/www/html/new_site
How to do this?
I can find my way around linux but I don't know it well enough to administer the server without a control panel...
All I really need is to manage basic functions for a single domain like email accounts, dns, backups and also see some visitor stats. Webmin seems to be missing some stuff that I need to do...
Cpanel is nice but it's expensive and seems to be designed for a reseller who is going to sell web hosting accounts. All I need is to manage one domain... Am I stuck paying for all the stuff I don't need with cpanel or what are the options?
to setup domain key (DK) on DirectAdmin (DA) control panel. DirectAdmin used exim as mail server by default.
View 4 Replies View RelatedI just created a new Domain "bernhardlinz.de" at the
Plesk Panel -> Websites & Domains -> Add new Domain
After the Creation the new Domain does not appear under "Websites & Domains".
I check the domain with
Code:
/usr/local/psa/bin/domain -i bernhardlinz.de
And all looks fine like my other, older domains:
Code:
General
=============================
Domain name: bernhardlinz.de
Owner's contact name: Bernhard Linz (admin)
Domain status: OK
[Code] ....
I can see the domain under "Mails" and also create new mail accounts. There are no Errors for this under
Code:
/usr/local/psa/admin/logs/panel.log
As i try to add the domain first i got a
Code:
[11-Jul-2014 21:41:35 Europe/Berlin] PleskUtilException: mailmng-outgoing failed: ERROR:outgoing:database disk image is malformed
Which I removed with the
Code:
/usr/local/psa/admin/sbin/mchk
Command I found in the Plesk forum. After that i could add the domain.
I try a add another fantasy domain - also works but alos not displaying in Panel "Websites & Domains"
I take a look at the Plesk-Database "psa" with the Build-In "phpMyAdmin"
I take a look at the table "domains" and it looks like the other entries.
The Server was restored a few days before from a Backup. After the restore i had have the problem the "mysql" service did not start. I fixed the problem with the description from [URL] ... (Start mysql in recoverymode, export all data, delete the content of the whole mysql folder /var/lib/mysql folder, init new database and import the exported data). After that all looks fine.
I indicated that I've basically been using my webhosting company as "file storage".
1) I create all my files in .html using notepad
2) My files are limited to .html, .jpg, .gif, (and a couple of .js and .css) files.
3) My domain is not connected with my webhost; I use the nameserver zoneedit.com and I use URL forwarding and mask/cloak the domain the address bar (using multiple domains) as follows:
domain1.com --> forwards to [url]
domain2.com --> forwards to [url]
domain3.com --> forwards to [url]
4) For uploading files, I go to ftp://123.456.78 and drop/drag/copy/paste files into the window using my browser
5) I'm able to password protect the subdirectories as I choose.
---------------
I called my webhost, Hostik, and told them that I was unable to do anything on my web console. I can't change a password, create a user, or even access my usage/bandwidth quotas.
They told me that I'm on an "old server" using the windows-based console (probably C-Panel / Control Panel) and they're in the process over the next three months of transfering everyone over to "Plesk".
So, they set me up with a new Plesk account, while keeping the old one in place, so that I could move/transfer my files to the Plesk account.
When I went to Plesk, I realized things are not the same:
1) In my Control Panel / C-Panel, I had a unique IP URL Address - [url]
2) In Plesk, it seems there's a set IP URL Address - [url] - that everyone shares.
3) I was told that in Plesk, many people use that IP URL address and that I'm supposed to place my files into the "httpdocs" folder.
Appearently, this is a system of shared hosting whereby many people have the same IP URL address (different from what I had before) and it recognizes each account by the login or something, so the "httpdocs" folder would identify my domain.
I was then told that in Plesk, I must have my domain affixed to the Plesk account.
In other words, I can no longer do what I was doing before, having my domain separated in another location and using URL forwarding from an outside nameserver.
--------------------------
So, my original question is what's the difference between Plesk vs. C-Panel/Control Panel?
Perhaps I answered most of it above.
Is it correct that I can't do things the way I've been doing them so far if that's the case?
It might be that Plesk is not for me and I may need to find a host that gives me my own unique IP URL Address. However, I was informed that not many companies are doing that as most are switching over to Plesk.
In addition, Hostik does not offer multiple domains.
In response to this thread, David recommended I try synhosting.com
synhosting.com has "Multiple Websites". I assume this means mulitiple domains. Correct?
What's my best option at this point?
1) Find a host that has C-Panel / Control Panel (if any there are)?
2) Use a service such as synhosting.com and move all my domains over to them?
3) If I do use synhosting.com, am I required to move my domains over to their nameservers?
4) I have my MX Mail records pointing to Fastmail.fm for my email virtual domains. Would I still be able to do this if my domain is dedicated to a webhost and opt not to use their email feature?
5) Should I get rid of this old-school thought of using my web host as "file storage" and stop this practice of using URL forwarding and cloaking?
I have a problem with on domain. The domain is the "main-domain" of the customer but it is not shown in the overview /smb/web/view
Not with the User logged in and not with the admin logged in.
But I can change setting, when I call the detail-page manually: /smb/web/overview/id/d:26
I tried to lock/unlock the domain/account, but nothing worked.
I could not see any mistakes in the database.
Deleting and adding the domain would be a trick, but because of having many domains/subdomains and dns-entries this is not my first choice.
I asked my current vps supplier about changing the certificate used to secure the plesk control panel as the default one causes certificate warnings. Their response was "dont worry about the warnings, the control panel is secure and trying to address the error can cause problems in plesk itself".
Is this correct?, I know the cp is still secure but customers arent going to think ssl certificate warnings are OK. I think their response was more of we cant help you so dont worry about it type response (a.k.a the brush off)
Is this an issue with plesk? vps is windows server 2k3
I Have a WinServer 2008R2SP1 with plesk 11. I am able to access to PControl panel with https://localhost:8443 but not from outside the server (https://serverIP:8443)
The firewall if OK, allowing port 8443.
Ive bought a wildcard certificate, and its working fine when i use URL....But it does not work when i go to hURL.... seems like the control panel chosing a default one for this.
Ive tried to make the certificate server default, changed the one in ip section to the wildcard one, and made the woldcard one default, nothing changed..