Plesk 11.x / Windows :: Unable To Establish Connection
Apr 26, 2014
This is the most instable Plesk version. I use the new Plesk 11.5, but really this is the most suck Plesk version
Web Deploy used to work and now it is not working. I use Web Matrix and when I try to connect, this is the error message:
UNABLE TO ESTABLISH CONNECTION
View 2 Replies
ADVERTISEMENT
Nov 5, 2008
I got a new server from uk2, has whm but i just couldnt get the server to work, i changed hostname and made nameservers etc but couldnt get it to work i pointed ips to hostnames and everything no response, domain is www.uploadline.com ns1.uploadline.com and ns2.uploadline.com i havent used cpanel for 2 years now and i used to have alot of experience in it before these days i just stick to directadmin and other control panels.
I just need to ask a few questions and i need help too to get my server up and running as im losing alot of time and money here
i remembered when i changed hostname on whm i need to run this through ssh:
/usr/local/cpanel/cpkeyclt
So i did, and this was the result:
Quote:
login as: rootroot@server80004.uk2net.com's password:
Last login: Sat Nov 1 01:39:07 2008 from proxy-sov.uk2.net
root@server1 [~]# /usr/local/cpanel/cpkeyclt
Updating Internal cPanel Information........................................quer y failed: query timed out
[cpkeyclt.pl]: No working dig found!
Unable to establish connection. License server hostnames could not be resolve to IPs.
Done
.Done
root@server1 [~]#
View 8 Replies
View Related
May 5, 2015
For some reason FTPS is no longer working as it used to before plesk upgraded. At this point, I am not sure which Plesk upgrade caused this since I do not FTPS or ftp in general often. its enabled as it was before, even disabled and re-enabled it again. Still gives a "could not establish connection". Restarted the service via command Line with "service xinetd restart". still isnt working...
View 19 Replies
View Related
Jun 7, 2015
I install wordPress and cant login to admin with this Address:
mydomain.com/wordpress_9/wp-login.php?redirect_to=http%3A%2F%2Fmydomain.com%2Fwordpress_9%2Fwp-admin%2F&reauth=1
And can't load
Show this error: The connection was reset
if i try this address can login > mydomain.com/wordpress_9/wp-login.php
I installed Plesk 12 on the Windows server 2012...
View 9 Replies
View Related
Jul 16, 2015
I just configured the plesk server to only allow ftps connections.
When I try to access with a ftp account on the server itself it works well, however when I try to access it from a client PC it get these errors :
(...)
Response: 200 Type set to I.
Command: PASV
Response: 227 Entering Passive Mode (XXX,XXX,XX,XX,XXX,XX).
Command: LIST
Response: 150 Opening BINARY mode data connection.
Error: The data connection could not be established: ECONNREFUSED - Connection refused by server
On the client PC I configured Filezilla in Passive mode with "Require explicit FTP over TLS".
Normally for the firewall only the port 21 is needed or am I wrong (with explicit FTP and passif configured)?
View 1 Replies
View Related
Oct 3, 2014
I am using connection string that written below but it does not work in your host.
<add name="LocalSqlServer" connectionString="Data Source=mssql.mydomain.at; Initial Catalog= mydb; User ID= myuserid; Password= mypassword; MultipleActiveResultSets=True;"/>
Any connection string instance for mssql webadmin ?
View 1 Replies
View Related
Jun 14, 2014
I can't add subscriptions, not even for the administrator account, comes up with:
Error: Filename: ?C:inetpubvhostsmygclive.comhttpdocsweb.config
Error: The configuration section 'system.webServer/rewrite/rules' cannot be read because it is missing a section declaration In module Exception type: System.Runtime.InteropServices.COM
[Code] .....
View 2 Replies
View Related
Mar 14, 2015
I'm trying to create a network connection from Windows (8.1) to my Plesk filesharing folder, which should be straight forward. For some strange reason my Windows desktop PC doesn't establish the connection but shows me an error message, saying that the provided folder is invalid (see attached images).
View 1 Replies
View Related
Feb 3, 2015
WINDOWS SERVER Plesk Panel version 12.0.18
Error: Test the database server connection failed:
mysqlnd cannot connect to MySQL 4.1+ using the old insecure authentication. Please use an administration tool to reset your password with the command SET PASSWORD = PASSWORD('your_existing_password'). This will store a new, and more secure, hash value in mysql.user. If this user is used in other scripts executed by PHP 5.2 or earlier you might need to remove the old-passwords flag from your my.cnf file
View 1 Replies
View Related
Feb 28, 2014
when i try to make backup of mssql 2012 on plesk 11.5 i have the following error:Error: dbbackup failed: Unable to backup database 'DBANME'. Unable to open connection: A specified logon session does not exist. It may already have been terminated.i already configured temp/network directory,
View 6 Replies
View Related
Mar 8, 2015
I installed plesk win 12 with mssql2012 , but nobody as abale to restore DB via plesk we recive this error Error: dbbackup failed: Unable to restore database 'degardis'Format of the initialization string does not conform to specification starting at index 29.the backup file is restored straight via sql management studio.
View 1 Replies
View Related
Dec 23, 2013
I have enabled mail for himivest.com and can access my eMail via Opera Mail as a download.
However, I cannot access webmail. Typing "[uRL] ...." into the address bar of my browser (Chrome) results in the message "No input file specified."
I believe this is a PHP setup error. I have tried disabling / enabling PHP support for himivest (in accordance with [URL] .... ) but this had no effect.
What must I do to enable webmail?
View 14 Replies
View Related
Aug 6, 2012
Lately whenever i try to connect to my Plesk Panel, I get Firefox's "Unable to connect" error and with Internet Explorer I get "Cannot display web page". I disabled all addons, still couldn't connect. Checked my Firewall, still nothing. I pinged the IP and got 51ms. My site is still up. And I just dont know what's wrong.
View 2 Replies
View Related
Jul 22, 2015
Unable to restore database '17'
Not valid backup:
Cannot open backup device 'C:Program Files (x86)ParallelsPleskBackupclub-panel.irdatabases171.bak'. Operating system error 5(Access is denied.).
VERIFY DATABASE is terminating abnormally.
(Error code 22)
---------------------- Debug Info -------------------------------
View 1 Replies
View Related
Feb 11, 2014
I had used Panel version 11.5.30. I unable to access Hosting Services / Domains !
You can see this picture show about this case !
I don't know why this Panel error ???
View 2 Replies
View Related
Jul 17, 2012
I've upgraded to 11, but when I try and apply updates, I'm getting
WARNING: Unable to connect to local default MySQL server. Read carefully article [URL] ..... for details.
I've followed the directions in the KB mentioned, but haven't had any luck yet.
View 8 Replies
View Related
Apr 27, 2015
I'm receiving the following error whenever I try to edit any hosting settings
Unable to determine preferred php handler id
I've found the article for this on the Linux KB (which states to raise a support ticket) but nothing on Windows.
I am running Windows Server 2012 R2 with Plesk 12.0.18
View 1 Replies
View Related
Jan 30, 2013
My domain is inactive in plesk and not active !!
After click in active to Domain this error : Error: Unable to activate the domain: Either the domain owner or their subscription is suspended.
View 2 Replies
View Related
Oct 12, 2014
I just recently created a new server with windows 2012 R2 server and need to move the mail and backups to another drive.
I have tried to run the Plesk reconfigurator as an Administrator and it comes up with the following error message see attached screenshot
View 3 Replies
View Related
Oct 9, 2013
How can I remove all previous web users, even after an uninstall, I am having trouble finishing a new installation, during the wizard because users already exist.
View 15 Replies
View Related
Jun 7, 2014
I'm Unable to Login to Control Panel, this issue started few days back, in that time i'm using Plask v11.5, When i try to log in browser try to log in and few minutes after it showing Error 500, Application error, I try to run reconfigurator.exe to verify & fix the Plesk installation, everything updated fine but issues still exist today i decided to upgrade to v12 and i upgrade to V12, everything installed fine and but still login issues there.
This time whey i try to login, i'm not getting any error message, but after some time i got mail from the server "alarm level changed. Server health parameter "Services > Plesk CPU usage" changed its status from "green" to "red"."
View 3 Replies
View Related
Mar 27, 2014
After updating i'm unable to login to the plesk panel with every user account.
---------------------------------------------------------------------------------------
Url redirect: https://[domain]:8443/sso/api.php?api=/ui
Error: Authentication failed: invalid username or password specified
---------------------------------------------------------------------------------------
The usernames and passwords are correct.
View 1 Replies
View Related
Aug 9, 2014
I have Plesk 12 on Windows Server 2012 and SQL 2014 Express, and I am unable to add the SQL server to Plesk. It looks like it is waiting for a long time for something, then I get this error:
Get database server version failed: mssqlmng failed: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. (Error code 1)Click to expand...
View 4 Replies
View Related
Nov 13, 2014
My Plesk backup doesn't work properly. I constantly get the error "dump file has wrong format".I followed the steps in "How to verify an invalid Plesk backup file" [URL] .... and found the following:
Code:
C:UsersAdministrator>c:xmllintxmllint.exe --noout --schema "%plesk_dir%PMM
plesk.xsd" "D:Program Files (x86)ParallelsPleskBackupmanual_info_1411131008
_formatted.xml"
file:///D:/Program%20Files%20(x86)/Parallels/Plesk/Backup/manual_info_1411131008
_formatted.xml:2769:
[code]...
No matter what I do (updating settings, saving, etc.), the error keeps coming back. Seems like a database inconsistency. How can I access the Plesk DB through PhpMyAdmin to check the notifications table? When I go to Settings > Database servers > Local MySQL server > Webadmin, I only see my customers' databases.
View 5 Replies
View Related
Nov 27, 2013
After upgrading the panel from 10.4.4 to 11.5.30 Update #23, I am not able to sort domains based on the "Renewal Date" column. With 10.4.4, I was able to sort. Is there anyway I can do this on 11.5.30?
View 7 Replies
View Related
Apr 10, 2014
im getting an error when im trying to create a subscription on a windows node via PPA management node, the task error is:
Method name: registerIpPlesk on SCREFleskWebIIS:0
Last execution output: This IP address XXX.XXX.XXX.XXX is already registered in Panel on the network interface Local Area Connection
the IP XXX.XXX.XXX.XXX is the correct service node IIS ip address..
View 1 Replies
View Related
Jul 24, 2014
I am having an issue updating a Plesk Panel installation via micro updates.
OS: Windows Server 2008 R2 SP1
Software: Plesk for windows 11.5
The following errors are generated when the system attempts to update. Please see below for details:
Execution failed.
Command: ai.exe
Arguments: Array
(
[0] => --select-product-id
[1] => panel
[2] => --select-release-current
[3] => --upgrade-installed-components
)
Details: ERROR: can't apply patch panel-11.5.30~patch47
Unable to set the object (C:Program Files (x86)ParallelsPleskadminplibapi-common.aiupd_37cuDomain.php.old) owner: (5) Access is denied.
[Code] ....
View 2 Replies
View Related
Sep 25, 2012
I have an issue on a Plesk 11 Installation
Every time a backup task finishes (full server or a single domain) i get the following error:
The operation you were performing failed. You can retry the operation with or without changing its parameters. You may also want to report this problem to our support.
Unable to find Backup dump object
---------------------- Debug Info -------------------------------
0: backup.abstract-repository.item.php:63
__backup__abstract_repository__item->getDump()
1: backup.abstract-repository.item.restore.php:38
__backup__abstract_repository__item__restore->accessItem(string 'GET', NULL null)
2: UIPointer.php:600
UIPointer->access(string 'GET')
3: plesk.php:50Click to expand...
View 1 Replies
View Related
Dec 19, 2013
I have installed Plesk 11.x windows version. I use that for 1 month but now I want to login to panel by http://mysite.com:8880 get error:
The system cannot find the file specified. (Error code 2) at Unable to connect to pipe .pipeP_85da9518-b79d-49a6-a154-e5055dc53d7c
View 2 Replies
View Related
Jul 23, 2014
After upgrading from 11.5.30 to 12.0.18, when make backup see next message:
<?xml version="1.0" encoding="utf-8"?>
<execution-result status="error">
<object name="example.com" type="domain">
<message severity="error" id="167b9714-3e33-4863-861d-69c4f559afe6" code="InformationalException">
<description>Unable to dump IP addresses for mail service</description>
[Code] ....
View 6 Replies
View Related
Feb 4, 2014
In plesk 11 with os windows 2012 when i try to create any new subscription i get following error:
Error: Unable to update domain data: Execute websrvmng --add-domain "--domain-name=testDomain123.com" failed with error code 1:
what should i do? this problem happen suddenly without any changes by us.
View 1 Replies
View Related