I tried use mylittleadmin or asp.net manager and booth tools NOT working on my windows plesk.
I tried remove and install again but still not working.
Tried run PLesk Reconfigurator and still nothing.
After click webadmin its shows a security warning conform box as following on Firefox ...
Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party.
Are you sure you want to continue sending this information?
And if click " OK" the page display " Server not found " error
[URL] ...
After Plesk panel upgrade to 12.x webadmin stopped working . It's showing following error
Code:
Server Error in '/' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. review the following URL and make sure that it is spelled correctly.
I am running plesk 11 on windows 2008 vmware esxi 5 vps,
When I try access mssql.domain i have the following error:
Line 1: <object id="ConnectionString" class="ASPEnterpriseManager.ConnectionString" runat="Server" scope="Session" />
I created a mssql database. When I click on the weasmin link I go to a 404.Also when I log in as administrator and go to Tools & Settings >>>Database Servers >>>>>click on the .MSSQLSERVER2012 then webadmin it will open myLittleAdmin for SQ Server and I can see the datases.
View 4 Replies View RelatedMicrosoft Windows Server 2012 Panel version 11.5.30 Update #47
The Webadmin app does not install all the folders it needs to run correctly. I have downloaded and repaired the install as noted in [URL] ..... This did not repair the install. All the folders that are needed in the application directory in the vhosts folder are still missing. I have attached the install log.
I am using connection string that written below but it does not work in your host.
<add name="LocalSqlServer" connectionString="Data Source=mssql.mydomain.at; Initial Catalog= mydb; User ID= myuserid; Password= mypassword; MultipleActiveResultSets=True;"/>
Any connection string instance for mssql webadmin ?
In Plesk 12.0.18 #4 I checked Grant the ALTER DATABASE permission to all Microsoft SQL Server database users . The problem is I cannot rename database tables or other functions with myLittleAdmin for SQL provided with Plesk.
My question is: Am I doing something wrong or is needed to upgrade the myLittleAdmin license to Full version?
I have faced the following ftp backup error in windows plesk 11.5.30
Transport error: unable to send directory to repository: Transport error: unable to put local file C:Program Files (x86)ParallelsPleskPrivateTemp/repo_transport_tmp_01cf171bcedd7710ackup_1401220130.zip to backup_1401220130.zip: Curl error: Failure when receiving data from the peer
When using a remote MSSQL server, the Webadmin link fails to load in a redirect loop.
Is there any way to change this link or disable it?
not because reason FTP has stopped working.FTP access already created continue to operate, does not work any additional FTP account or the principal to create a new domain.
View 2 Replies View RelatedI cant connect to the Database WebAdmin. If I click the icon, i got an "File not found." in the opening tab. Back in Plesk I get the following:
ERROR: PlexkFatalException
Server id is undefined?
I even cant connect via ssh to the mysql part of my server. But the server is running and both of my two wordpress pages run smoothly. I know this page: [URL] .... – but as I sad, cant enter die mysql.
It seems something is wrong with the permissions. I'm on the point where I just want to reset everything database related. But how?
So since some time the email forwarding is not working anymore. I am currently working on the version 11.5.30.
The main problem I have, is that the hosting provider who is responsible for the server hasn't fixed this since may!
My intermediate solution would be to add a webmail account so the person the mail is being forwarded to can use it.
Problem with FTP Users on Plesk 11 after updating from Plesk 10.
SO: Windows Server 2008 R2 Standard Edition
Panel: Plesk for Windows 11.0.4
I noticed that users cannot FTP, when trying to connect they receive an error: 530 User cannot log in, home directory inaccessible.
Doing further investigation, I confirmed that only users created after upgrade have this issue, that created before upgrade works fine.
I already discovered that home directory is missing on IIS 7.5 FTP. Creating a symbolic link on NTFS using MKLINK command pointing to home folder and configuring permissions to user solved the problem.I think its a bug on Plesk Panel 11.0.4 as I can see same the same problem on two distinct servers after upgrading from Plesk 10 to 11.
I tried to run Plesk Reconfigurator utility with all options, without success.I can fix home directory by myself manually but it will be great if Plesk Panel handle this again.
I tried to install Joomla on my server from applications ( Not manualy ) . I go at applications on plesk's panel then i click on Joomla and the click to install it. After that , it shows that it's downloadiing ( Downloading Joomla... ) and it isn't doing anything else. It remained stuck at 0% like forever. I waited more than 2 hours once, and it didn't do anything. It was just stuck at zero. Other applications are working.
View 1 Replies View Relatedmy plesk server was running OK for the last 13 months and suddenly it breaks apart on its own and I cant make it work again. [URL]
Is there a way to backup database at this stage? How?
Planning to reformat my windows server. and start over.
I currently have a server (Xeon 1x5310, 4gb RAM, 4x500gb hdd in Raid 10) with Windows 2003. Now do to a project I'm looking at installing Windows 2008 and upgrading to 2x5310 and 16gb of RAM on my server.
I'm looking to create a virtualized test environment for development of a new web service I'm working on. What I'm looking to develop right now is 2 file servers, 3 web servers, 3 MS SQL database servers and 1 DNS server (would prefer but not sure if hardware can handle it. Virtualization would be ideal as this is very similar to what we believe will we have when we launch the service.
I have a few questions I'm hoping you might be able to answer:
1) With the upgraded hardware specs, should it be able to handle the load if I assign each virtual entity 1 core with 2gb of RAM each?
2) I would like to create each of the multiple servers in a cluster (ie cluster of webservers) as this is how it will be in production. But, I've never worked with clusters before so:
a) where can I learn about clustering windows 2008 servers?
b) is this possible to do in a virtualized environment?
3) How does MS work the licensing? I want to have each server running Windows 2008 and 2-3 of them running SQL Server 2005.
a) Do they charge extra for each virtualized server?
b) Does this mean I have to purchase 3 complete copies of SQL Server or is there a way I can pay a low license fee for use in a non-commercial, non-production environment?
4) Does anyone see any problems with this setup or have any suggestions for me?
* I do have money available to spend on a good solution, so if you have suggestions that cost please let me know. I just thought virtualization would be the way to go as the project will be in development for at least a year with no public access.
** I realize that Hyper-V hasn't been released yet (that I know of) so information on it might be limited
after upgrading from 11.5. to 12.0.18 all web Hosts which are using asp or aspx files are not working anymore.
We get following error:
HTTP-Fehler 404.17 - Not Found
ModulStaticFileModule
BenachrichtigungExecuteRequestHandler
HandlerStaticFile
Fehlercode0x80070032
Angeforderte URLhttp://www.ratg.at:80/index.asp
Physikalischer PfadC:Inetpubvhosts
atg.athttpdocsindex.asp
AnmeldemethodeAnonym
Angemeldeter BenutzerAnonym
If we try to repair the Installation with the reconfigurator "Plesk virtual Hosts Security" the program is crashing.
I've just migrated server to server but I didn't use the migration manager, I simply backed up each domain's content and restored those backups on the new server.
The issue I have run into is the scheduled tasks at the admin level (Tools & Settings > Scheduled Tasks) work but any schedule task under a domain do not. The scheduled tasks under the domains show as inactive (no green tick) and when I click to enable them, I get the following message
"Information: The scheduled task Google Product Feed Daily Scheduled Task was switched on."
If I then look at the page, even though the above message says it is, the scheduled task is still not enabled. Going into the scheduled task and switching it on there results in the same message, but it doesn't switch on.
How to rebuild all of the scheduled tasks within Plesk?
Currently Installed: v. 12.0.18
After we update to plesk 12. We are not able to access file manager inside plesk.
Its giving this error : check attachment,
Also when we tries to delete a domain we can't its giving this error message : Failed to parse response. Reason: Failed to read data from stream Process output:
It seems some permission issue. I already executed plesk configutor and permission fix tool but the issue remains.
We can no longer create a working subscription
Microsoft Windows Server 2012 R2
12.0.18 Update #26
After the creation of a subscription, DNS does not work properly.
The last successful subcription was created Sept 26, 2014.
I thought something ontoward had happened at first so attempted to delete the subscription and re-create.
On attempting to delete the subscription the following error is given
Error: Some of the selected subscriptions were not removed.
Unable to remove domain: Error during domain.com removeZone: dnsmng failed: Unknown error 0x80131509 (COM Interop Error 80131509, Description: System.InvalidOperationException: Operation is not valid due to the current state of the object. at System.Management.ManagementObject.Delete(DeleteOptions options) at System.Management.ManagementObject.Delete() at WMIMsDNS.Provider.DeleteRecordsByType(String zone, String type) at WMIMsDNS.Provider.DeleteZone(String zone, UInt32& serial)) at removeZone ZoneName = 'domain.com'Click to expand...
Can I use this edition for hosting on dedicated server, and how does it compare to the enterprise edition ? Can it be used with hosting? The web edition sucks as I can not install ms sql on it, so it is useless. Anyone use sbs server to host his website, because most of the link i read never mention it for hosting, and only for print sharing/ filesharing/ business applications, but where is it's use for hosting?
So what do you think ? IO looked at its infor and it did not provide much?
We uploaded one .Net application and one Java Web application to Parallels server.
.Net application is configured by default.
Our Java web application has JSPs and Servlets.
With respect to our Java web application we are able to access the JSPs but any request to Servlet is not hitting the Servlet.
We are able to access either static JSP/HTML pages ONLY. But we need to process Servlet requests also.
I'm trying to use server side includes in a PHP website but am getting the error open_basedir restriction in effect.
I've tried going in to the PHP Settings for the website and have selected the predefined option
{DOCROOT}{/}{:}{TMP}{/}
Which as I understand it should allow access to all files within my httpdocs folder but I still get the error:
PHP Warning: include(): open_basedir restriction in effect. File(/sparklyphp/cms/inc/checkAdminLogin.php) is not within the allowed path(s): (F:PLESKWWWviwebsitedesign.comhttpdocs;C:WindowsTemp) in F:PLESKWWWwebsitedesign.comhttpdocssparklyphpcmsindex.php on line 1
The thing is I know 100% that the file it's having a problem with is in a subfolder of the
F:PLESKWWWwebsitedesign.comhttpdocs folder (the full F:PLESKWWWwebsitedesign.comhttpdocssparklyphpcmsinccheckAdminLogin.php).
What else do I have to do?
I don't understand.
Please see attached screen-shots.
[url]
[url]
[url]
[url]
What is Microsoft Silverlight? I have a webserver which support .NET 1.1 / 2.0 / 3.0 / 3.5, Does it require to install any thing else for support of Microsoft SilverLight as my clients are asking for Silverlight support.
View 3 Replies View RelatedI have built a web application with visual studio 2008 that uses some improvements and tools like "entity framework", "script manager", "updatepanel" etc.Is it enough for the hosting server to have ".net framework 3.5" installed or "framework 3.5 with SP1" ?. I ll choose hosting company accordingly.
View 8 Replies View RelatedDoes anybody use Microsoft LogParser on their 2003 server? I am looking to use this program to find out when a user login via remote desktop and when they logoff. I have found that in Event Viewer the EventID of user login/logoff is 528 or 538. The only thing is that there are multiple logoffs in a row (with the same time for the same user) or the user logs in then out again at the same time right down to the second.
This is the query I was running then importing that data into a database to view/analyze the data:
Code:
SELECT
ComputerName,
EventID,
TimeGenerated AS LogTime,
STRCAT(STRCAT(EXTRACT_TOKEN (Strings, 1, '|'), ''), EXTRACT_TOKEN(Strings, 0, '|')) AS Username
INTO
c:logonoff.csv
FROM
[computer name here]Security
WHERE
EventID IN (528; 538)
AND
EventCategoryName = 'Logon/Logoff'
I have a potential client that uses it and ISA is blocking the ports my control panel uses so they need to open up the ports. Anyone know how they can do this? They're not local otherwise I'd just stop by and tinker around until I figure it out.
View 2 Replies View RelatedI've already posted this over at the vBulletin forums and with their tech support team, but so far no one has been able to find a solution. Someone suggested I post here as well.
I am currently running vB using PHP 4.3.9 with Zend WinEnabler on a windows 2003 server. I have a seperate database server and a web server. This current configuration works fine, but I am moving to an upgraded web server and this is where the problems start.
Due to intermitant issues with Zend WinEnabler (now a discontinued product) I wanted to move to the latest version of PHP (5.2.5 NTS) and Microsoft FastCGI. The problem is that I am getting blank pages when clicking the Today's Post link from the top menu and immediately following the submission of a new post. I've gone through all of the vBulletin listed suggestions about trouble shooting blank pages and none apply.
Because I have a seperate database sever, I am accessing the same database with the new server vB configuration I am migrating to. As such I suspect the issue has to be related to web server given there are no issues on the current live site and the only changes are the PHP version and acceleration app.
If anyone has some suggestions, please let me know. I am running out of time on my server migration window before I am going to be billed for two servers.
Can anyone give me some insight on how VPS licensing works with SPLA? According to my reseller, each VPS needs its own standalone license which seem to differ with what I read somewhere about Microsoft Server 2008 allowing up to 8 virtual stances with 1 license or something like that.
View 1 Replies View Related