Microsoft Windows Server 2012 Panel version 11.5.30 Update #47
The Webadmin app does not install all the folders it needs to run correctly. I have downloaded and repaired the install as noted in [URL] ..... This did not repair the install. All the folders that are needed in the application directory in the vhosts folder are still missing. I have attached the install log.
I would like to install APCu (Alternative PHP Cache) & ZendOptimizer on plesk v12, I just wanted to know if there is any instructions for installing it correctly in a manner that will not cause issues with plesk updates.
View 5 Replies View RelatedI am running plesk 11 on windows 2008 vmware esxi 5 vps,
When I try access mssql.domain i have the following error:
Line 1: <object id="ConnectionString" class="ASPEnterpriseManager.ConnectionString" runat="Server" scope="Session" />
I created a mssql database. When I click on the weasmin link I go to a 404.Also when I log in as administrator and go to Tools & Settings >>>Database Servers >>>>>click on the .MSSQLSERVER2012 then webadmin it will open myLittleAdmin for SQ Server and I can see the datases.
View 4 Replies View RelatedI tried use mylittleadmin or asp.net manager and booth tools NOT working on my windows plesk.
I tried remove and install again but still not working.
Tried run PLesk Reconfigurator and still nothing.
I am using connection string that written below but it does not work in your host.
<add name="LocalSqlServer" connectionString="Data Source=mssql.mydomain.at; Initial Catalog= mydb; User ID= myuserid; Password= mypassword; MultipleActiveResultSets=True;"/>
Any connection string instance for mssql webadmin ?
After click webadmin its shows a security warning conform box as following on Firefox ...
Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party.
Are you sure you want to continue sending this information?
And if click " OK" the page display " Server not found " error
[URL] ...
After Plesk panel upgrade to 12.x webadmin stopped working . It's showing following error
Code:
Server Error in '/' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. review the following URL and make sure that it is spelled correctly.
I have just ran easyapache to update from 5.2.4 to 5.2.5 and selected suhosin.
I can see no evidence of it by viewing phpinfo scripts such as vbulletin's.
i should be able to see something like this yes?
[url]
and there is nothing new in php.ini other than:
Directory in which the loadable extensions (modules) reside.
extension_dir = "/usr/local/lib/php/extensions/no-debug-non-zts-20060613"
zend_extension="/usr/local/IonCube/ioncube_loader_lin_5.2.so"
zend_extension_ts="/usr/local/IonCube/ioncube_loader_lin_5.2_ts.so"
extension="suhosin.so"
Via SSH i get this
# php -v
PHP 5.2.5 (cli) (built: Apr 26 2008 06:45:31)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
with the ionCube PHP Loader v3.1.32, Copyright (c) 2002-2007, by ionCube Ltd., and
with Zend Extension Manager v1.2.2, Copyright (c) 2003-2007, by Zend Technologies
with Suhosin v0.9.23, Copyright (c) 2007, by SektionEins GmbH
with Zend Optimizer v3.3.3, Copyright (c) 1998-2007, by Zend Technologies
# /usr/bin/php -v
PHP 5.2.5 (cgi) (built: Apr 26 2008 06:49:11)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
with the ionCube PHP Loader v3.1.32, Copyright (c) 2002-2007, by ionCube Ltd., and
with Zend Extension Manager v1.2.2, Copyright (c) 2003-2007, by Zend Technologies
with Suhosin v0.9.23, Copyright (c) 2007, by SektionEins GmbH
with Zend Optimizer v3.3.3, Copyright (c) 1998-2007, by Zend Technologies
I have upgrade plesk to 12 version and after upgrade all the domains that have more than 2048 MB on the server are shown as 2048 MB.
If i go on the domain statistic the tab the total disk usage is 2048.1 MB but on the graph the services disk usage are shown correctly.
I have 2 print screen.
I am trying to install Spam assassin on Plesk 12.0.18 on windows server 2012 r2 . I am getting error:
Error: Unable to set Plesk SpamAssassin 3.3.2 as the default Spam Filter: defpackagemng failed: Execute spammng.exe --check failed with error code 1: Unable generate the unique file name by template D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassinlocal.cf[*].bak: directory D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassin does not exist
I have tried re-installing and installing spam assassin from command and as per the solution given in below KB: URL....But I an still not able to install in on the server. I have checked all directory paths are correctly located.
Plesk 12.0.18 updated recently. After resolution of any problems caused by migration, I'm on the last (I think).
By accessing the domain panel and try to install Wordpress on the applications tab, I encounter the error below:
Error: The Following error has occurred During The download of application: HTTP Error (0)
[URL] ....
This error is repeated for the installation of any application, such as Joomla and Drupal.
When using a remote MSSQL server, the Webadmin link fails to load in a redirect loop.
Is there any way to change this link or disable it?
I cant connect to the Database WebAdmin. If I click the icon, i got an "File not found." in the opening tab. Back in Plesk I get the following:
ERROR: PlexkFatalException
Server id is undefined?
I even cant connect via ssh to the mysql part of my server. But the server is running and both of my two wordpress pages run smoothly. I know this page: [URL] .... – but as I sad, cant enter die mysql.
It seems something is wrong with the permissions. I'm on the point where I just want to reset everything database related. But how?
I am running a CentOS 6.6 (Final) with Plesk 12.0.18 Update #27 on my dedicated server. I was advised to upgrade my server to one that has a SSD due to better performance. What they failed to tell me was that I would need to perform additional configurations so that Plesk stores the subscription files in the /HDD-var/ directory and NOT the /SDD-var/ directory. Current server
Here are my questions:
1. How difficult would it be (I am a quick learner and can follow exact steps or directions very well) to make Plesk store the files on the HDD rather than the SDD?
2. Is this something I should undertake or is this very difficult to do?
3. If I perform these changes, will they revert to the old way if I perform Plesk updates? Or will the changes I make become permanent?
SSH: df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 4.0G 916M 3.1G 23% /
/dev/mapper/ssd-usr 3.9G 1.9G 1.8G 51% /usr
/dev/mapper/ssd-var 3.9G 3.7G 2.7M 100% /var (Plesk is storing data here)
/dev/mapper/ssd-home 3.9G 792M 2.9G 22% /home (Would also like this data to be on the HDD)
[Code] ....
When I modify rules using the firewall panel it is not generating rules correctly when selecting allow from selected sources deny from others.
View 2 Replies View RelatedI have domainA and domainB. domainA hosting files, for security ALL browser access should denied.. EXCEPT domainB make in php call with readfile() to a file on domainA. This should allowed.
domainB => readfile(http://domainA/myfile) => allowed ... all other access should denied.
So I set in vhost of domainA this:
<DirectoryMatch "^/var/www/vhosts/domainA/httpdocs/folder/">
Order deny,allow
Deny from all
Allow from 127
Allow from server-ipv4
Allow from server-ipv6/128
Allow from ::1/128
</DirectoryMatch>Click to expand...
I am using the plesk firewall and trying to set up SSH rule which only allows from my IP but deny from everywhere else. In previous versions this worked fine by adding an ip selecting Allow from selected sources, deny from others and the icon in the rules would be orange with the lines
allow incoming from xxx.xxx.xxx.xx
Deny incoming from all others
However this no longer works as the deny from all others is not appearing and is not being generated in the iptables by plesk.
I have a Centos 6 server with Heart Internet, who yesterday had an issue with the issue and once back online have been struggling til now getting the mysql service working correctly again and have now refused to provide any further support and redirected me here.
I was following this article here: [URL] ....
I've gotten to point 4. "~# mysqldump -uadmin -p`cat /etc/psa/.psa.shadow` -A | sed '1iSET FOREIGN_KEY_CHECKS = 0;' > /root/dumpall.sql" however it's saying "got error: 145: table './avenue141_dabs/av_options' is marked as crashed and should be repaired when using LOCK TABLES and any attempts made to get into the DB to repair is giving me "error: 1045: Access denied for user 'root'@'localhost' (using password: NO)
This issue is urgent as we have a few websites on this server which use mysql databases for their website.
Latest Plex installed on a fresh machine. Have tried both Ubuntu 12.04 and 14.04 and cannot seem to have my website work correctly regarding URL rewrites. Its enabled in apache...
View 1 Replies View RelatedI want to move the data directory to another partition on all nodes. Apache (vhost), IIS (vhost), MySQL (databases) and Postfix (mailbox content). What's the correct way to do this without breaking functionality of PPA?
View 5 Replies View RelatedWhen I deny all other traffic for the "System policy for incoming traffic" to secure the server by only allowing the explicit ports I've requested to open, my server stops operating correctly.
It appears when I set the "System policy for incoming traffic" to deny, it appears to be disrupting various functions such as web traffic over ports 80/443, FTP, SSH, they either work extremely slow or don't work at all.
I brought this up with my Plesk license provider and they stated that the Plesk firewall doesn't add any tracking for ephemeral ports, therefore if you set the policy to drop for incoming/outgoing, it's not going to allow proper TCP communication since the return socket can't be opened. Also that the firewall is an explicit deny system rather than explicit allow based system.
Am I doing something wrong? All I want to do is to block all ports other than the ones I've set to allow. Is this how it is supposed to work?
Where can i find a step-by-step guide on how to install ffmpeg-php on windows?
I got totally lost while doing that. Below are the steps i'v taken so far:
- Dled Windows EXT from here: http://sourceforge.net/project/showf...roup_id=122353 (ffmpeg_new.rar)
- Unzipped it.
-Copied all php_ffmpeg_... dlls into php's ext dir
-Copied avformat.dll and avcodec.dll to system32 folder
-Activated ext (i am using WAMP5)
-Restarted Apache
-Ran phpinfo(); and didnt see the ext activated.
How do I install Windows on VMWare ESX? A guide would be nice.
View 3 Replies View RelatedI designed my companies website but we've had a change in IT and php went down. The new guy (who is here to fix things) just sent me this and quite frankly I'm at a loss (i use a VPS, thus never having to deal with this stuff). But seeing how it's my own company I figured I'd try to help.
Here is the question:
Quote:
You are running IIS (windows server). The PHP should be something straight forward, but as we see it is not...
Previously, you had PHP ver PHP 5.2.6 dated may 2008. - it wasn't working correctly.
I updated it with the latest version php-5.2.9-1 dated march 2009. - and now the PHP is not functioning.
My questions, if you know was to figure which option of PHP cgi are you using.
IIS ISAPI module
IIS FastCGI
IIS CGI
Then, when installing the PHP, there are many extensions that are optional to install. Do you know or can you tell me, which extensions are needed by your app?
Honestly, the website just uses a few php includes to template it (and make my life easier). And that's what were trying to get working.
my current situation is that i'm currently renting out a server in a datacenter, and there is no realistic way I can get physical access. Call me cheap, but I really don't fancy shelling out $100 to get my techs to install it. I do have an idea though, and I just wanted to know how realistic it is / how I would go about performing it.
My server has a rescue shell (uses busybox) that I am able to re-install the OS from (all linux OSes), re-partition the HDD and do general troubleshooting things from. If I was to create a VMware machine on my local computer, install windows 2003 and use a hdd image cloner (from within the machine) to create an image of the HDD, how would I go about copying this image to the server's HDD? I don't know of any cross platform "HDD backer upper / recoverer thingies"
Has anybody faced problem in installing Windows 2003 SP2 over SP1? I want to know what problem can be faced before I start with the SP2 installation.
View 9 Replies View Relatedi have a dedicated box with centos.. i wold like to install VmWare workstation and a virtual windows image in vmware program, and then i wold like to make remote desktop on windows image from vmware..
View 2 Replies View RelatedI have a Windows Mobile 6 (Blackjack II) phone that I am connecting to my cpanel VPS via Pop3.
I have a number of pop3 accounts setup to check for email every 30 minutes. However, every couple days the phone stops downloading mail and if I do a manual send and receive I get a "The Server Certificate is not valid. Continue Anyway?" with a yes/no. If I click yes, the email downloads and then the automated emails will work for several days and then the process is repeated.
Does anyone know how to either disable this check on the phone (no luck finding that yet), or to install the certificate from the cpanel mail server to the phone?
The company I work for unfortunately runs their site on a IIS server. I want to install some forum software, vBulletin or phpBB onto the server and run it on the same site. PHP of course needs to be installed to do this.
Boss is worried that putting PHP on same server as ASP might take down the site if something goes wrong. What are the odds of this happening if I follow directions and what steps should I take to install?
