Plesk 12.x / Windows :: Joomla Not Working To Be Installed From Applications
Jun 21, 2014
I tried to install Joomla on my server from applications ( Not manualy ) . I go at applications on plesk's panel then i click on Joomla and the click to install it. After that , it shows that it's downloadiing ( Downloading Joomla... ) and it isn't doing anything else. It remained stuck at 0% like forever. I waited more than 2 hours once, and it didn't do anything. It was just stuck at zero. Other applications are working.
i am relatively new to Plesk, i ordered a vserver with Plesk a couple of months ago and spend a lot of time setting everything up and developing several new websites. I am used to developping new websites on a hidden adress (sth like domain.com/dev/ instead of the top level) and then switch the document root to point to the hidden directory when all is done. This practice has served me and my clients well for the last 10 years.
Using the Plesk features like built-in applications seemed like a good idea at the time but wanting to switch the new websites live i have now found out that Plesk won't let me do this since..It is impossible to change document root because there are web applications installed on this website.
I had read somewhere on the interweb that the v12 would let me do this so i just spent the better part of today updating to v12 .. but alas no luck, the limitation is still there. Is there a way to remove this limitation ?
I am trying on a customers Site to install joomla 3.2.x (latest available)Unfortunately an error ist coming up after entering the datea (admin Login, db, thigns, etc..)
I registered my domain yesterday and the company where I registered (Webstekker) forwarded me to this website where they obviously have there websites. I wanted to start immediately with my website. I can install Wordpress properly, so will it show easy fast made html text files.
Joomla is the one I want and need to use. I tried to install it via the application tab in either httpdocs and httpdocs/joomla. I tried custom install via the application tab, but didn't work.
Then I tried to copy the files myself via FTP to the server and tried to install it again. Made MySQL databases, but I get stucked on the last installation page where it did ask me if I wanted to install some examples. Whatever I choose it won't go further. Nvm, when I go back to the domain itself, it says I have to delete the installation map (as it should ask when install is actually finished). When I delete the installation map, my domain has no content, nothing. I can however, login via the domain/administrator
So there is something installed, the back end is working, but a website also needs some frontpage right?
I have a problem. I am running Plesk 11 with Windows 8. I installed wordpress and joomla. If I want to make one update from joomla 3.0 to 3.0.3 I get the error Internal Server error 500.
In Wordpress I get a error, too: By the update from 3.5 to 3.5.1 i get the error: The directory is write protect or not available.
In WordPress I instert in the wp-config.php following.
define( 'WP_TEMP_DIR', ABSPATH . 'wp-content/' );
Now, does the updates to WordPress and plugins work.
My question is, I am running not only one website with WP. How can I make the settings for all WP instances running on the server? And How can I fix it with the Joomla update?
I've transferred at Joomla! site to my server with Plesk 11.09. I want to see if its all working allright before i change DNS to point to the new server.
I put in [URL] .... as preview link, but that only shows the Plesk default UI. When i add 'index.php' to the end I do get the site, but without formatting
Prior to using plesk, I had a few sites that had SSL certificates installed, the old fashioned way (manually through IIS). I have now setup those domains in plesk, and I need to somehow make PLESK aware of these SSL certificates.Right now, I setup the domain in plesk, give it a dedicated IP, and allow SSL connections. It chooses the default certificate and my already installed in IIS SSL certificate isnt listed.
Is there any way I can get it listed? I went to the add an SSL area, and it seems that this area is only good for generating new SSL certificates, but mine is good for another 1+ years.The bummer is that for some reason, anytime I make any type of change to the site in plesk, that it seems to overwrite the SSL bindings and changes my manual changes to the correct certificate (through iis) back to the default certificate.
I just finished installing Plesk control panel on a clean installation on windows server 2008 r2 SP1.
Everything is fine except that even though i have installed php 5.2 (chose to install php 5 along with php 5.3 and 5.4) but php 5.2 does not show up in the panel and plesk ignores it.
I can confirm that the folder corresponding to php 5.2 is in the right place along with the other php versions and i can see that the php.ini file exists in there. but i had no luck getting it to work.
I also cannot see LSAPI handler option in plesk's "website scripts and security" section.
I have a dedicated server here in the UK with fasthosts (win 2008 server, IIS 7), which which has been running fine for nearly a year. it was running plesk 9.2, and then out of the blue it got errors creating a new domain saying that PHP wasn't installed.
PHP was/is installed on the server, and is still running fine within my 12+ domains/websites. at the point of the error it was running 5.3.8 - i had manually upgraded the version outside of Plesk, but it had seen the new version when installing new domains.
When Plesk stopped seeing that PHP was installed, my hosts asked me to upgrade Plesk, as it would solve the issue. I used that ai.exe program, and choose v11.
The control panel installed OK - but I did lose my websites for a while, due to it downgrading my PHP to v5.2, and installing an older MySQL version which tried to use the same ports etc (I also have manually installed mysql v5.5 and have 1gig databases in that installation!).
After chosing the upgrade to 5.3 option in the Plesk control panel, and turning the Plesk installed Mysql v5.1 service off and to disabled in windows services - 'revealing' my 5.5 version, I could at least get my websites up and running once again!
Once all those were running (the priority), I have found that v11 Plesk has the same problem as v9.2, namely that it doesn't think that PHP is installed and available.
The error on installing a new domain;
Error: Failed domain creation: Unable to update domain data: Execute websrvmng --add-domain "--domain-name=testkrispy.co.uk" failed with error code 1: PHP 5 is not installed
Oddly it does see PHP 5.3.15 in the Service components screen, and it's ticked 'green' in that page, so all looks well.
On trying to install a new domain using plesk I get this;
And also on pages such as webmail - it also shows 'PHP not installed' against those webmail clients which would need PHP to run.
Any way to 'force' Plesk to see that the PHP 5.3.15 version that it itself installed (and I've removed the component and re-installed using Plesk).
My list on the server components page;
ASP 7.0.6002.18276 ASP.NET 2.0.50727.4016 FastCGI Support 7.0.6002.22343 Perl v5.10.1 built for MSWin32-x86-multi-thread PHP 5.3.15 Python 2.6.5.12 SSI 7.0.6001.18000
I've tried something found on this forum (under the 10.4 area), but that hasn't fixed it;
"C:ParallelsInstallerparallelsPANEL-WIN_11.0.9dist-msi-Microsoft-2003-i386php53.msi" you will have an option for "repair" - ran that, no difference.
So as it stands, Plesk 11 is running, and most functions work, it just doesn't recognise the PHP install that it put in place... so I can't add software which requires PHP through Plesk, nor add new domains. All existing domains are running and using PHP fine - so it's installed OK.
One error I've noticed on startup - within the PHP error log, is the following - which I'm guessing is coming from the Plesk's own PHP executable (I can see it uses a 5.3.10 version in it's own admin area, with an extended php.ini file? ) I'm guessing the plesk's php.ini extension is trying to double load some dlls (which isn't a problem?) but seems to not find the php_sockets.dll - although that file is in the directory specified!? If it's a php dll around network sockets, maybe it is trying to use those to communicate with a running php instance? (Just guessing here?)
[30-Jul-2012 15:56:42 UTC] PHP Warning: Module 'mbstring' already loaded in Unknown on line 0 [30-Jul-2012 15:56:43 UTC] PHP Warning: Module 'mysql' already loaded in Unknown on line 0 [30-Jul-2012 15:56:43 UTC] PHP Warning: Module 'mysqli' already loaded in Unknown on line 0 [30-Jul-2012 15:56:44 UTC] PHP Warning: Module 'pdo_mysql' already loaded in Unknown on line 0 [30-Jul-2012 15:56:44 UTC] PHP Warning: Module 'pdo_sqlite' already loaded in Unknown on line 0 [30-Jul-2012 15:56:44 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'C:pleskAdditionalPleskPHP53extphp_sockets.dll' - The specified procedure could not be found. in Unknown on line 0
I am attempting to use PHP on a IIS6 server to run console applications. There is no issues with my PHP code as it works on my own computer however it fails when tested on my Windows Server 2003 server.
The script it designed to execute a command that runs the program however the program does not run. If I manually type the command in command prompt while logged in via Remote Desktop the application launches in a new console window.
Could the problem be with the fact its trying to launch a new console window and since the user account its using is just a IIS account it can't create the console window? If so, without editing the actual program code or creating a service, how can I configure Windows to execute the program?
I have faced the following ftp backup error in windows plesk 11.5.30
Transport error: unable to send directory to repository: Transport error: unable to put local file C:Program Files (x86)ParallelsPleskPrivateTemp/repo_transport_tmp_01cf171bcedd7710ackup_1401220130.zip to backup_1401220130.zip: Curl error: Failure when receiving data from the peer
If anyone is familiar with memcache... I could really use your help.
I've installed memcache, added the extension to php.ini and it's all showing up when I do phpinfo...
However, when I try to run memcache, I always get that I cannot connect and when I try 'memcached' or 'memcache' from the command line, it always says it can not recognize it.
not because reason FTP has stopped working.FTP access already created continue to operate, does not work any additional FTP account or the principal to create a new domain.
Problem with FTP Users on Plesk 11 after updating from Plesk 10.
SO: Windows Server 2008 R2 Standard Edition Panel: Plesk for Windows 11.0.4
I noticed that users cannot FTP, when trying to connect they receive an error: 530 User cannot log in, home directory inaccessible.
Doing further investigation, I confirmed that only users created after upgrade have this issue, that created before upgrade works fine.
I already discovered that home directory is missing on IIS 7.5 FTP. Creating a symbolic link on NTFS using MKLINK command pointing to home folder and configuring permissions to user solved the problem.I think its a bug on Plesk Panel 11.0.4 as I can see same the same problem on two distinct servers after upgrading from Plesk 10 to 11.
I tried to run Plesk Reconfigurator utility with all options, without success.I can fix home directory by myself manually but it will be great if Plesk Panel handle this again.
I am running Debian 7.5 and after a recent re-install of plesk and the os I am unable to download any applications. As soon as I run install wordpress or any other application the download bar just sits at zero.
after upgrading from 11.5. to 12.0.18 all web Hosts which are using asp or aspx files are not working anymore.
We get following error: HTTP-Fehler 404.17 - Not Found ModulStaticFileModule BenachrichtigungExecuteRequestHandler HandlerStaticFile Fehlercode0x80070032 Angeforderte URLhttp://www.ratg.at:80/index.asp Physikalischer PfadC:Inetpubvhosts atg.athttpdocsindex.asp AnmeldemethodeAnonym Angemeldeter BenutzerAnonym
If we try to repair the Installation with the reconfigurator "Plesk virtual Hosts Security" the program is crashing.
I've just migrated server to server but I didn't use the migration manager, I simply backed up each domain's content and restored those backups on the new server.
The issue I have run into is the scheduled tasks at the admin level (Tools & Settings > Scheduled Tasks) work but any schedule task under a domain do not. The scheduled tasks under the domains show as inactive (no green tick) and when I click to enable them, I get the following message
"Information: The scheduled task Google Product Feed Daily Scheduled Task was switched on."
If I then look at the page, even though the above message says it is, the scheduled task is still not enabled. Going into the scheduled task and switching it on there results in the same message, but it doesn't switch on.
How to rebuild all of the scheduled tasks within Plesk?
After we update to plesk 12. We are not able to access file manager inside plesk.
Its giving this error : check attachment,
Also when we tries to delete a domain we can't its giving this error message : Failed to parse response. Reason: Failed to read data from stream Process output:
It seems some permission issue. I already executed plesk configutor and permission fix tool but the issue remains.
After click webadmin its shows a security warning conform box as following on Firefox ...
Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party.
Are you sure you want to continue sending this information?
And if click " OK" the page display " Server not found " error
After Plesk panel upgrade to 12.x webadmin stopped working . It's showing following error
Code: Server Error in '/' Application. The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. review the following URL and make sure that it is spelled correctly.
Microsoft Windows Server 2012 R2 12.0.18 Update #26
After the creation of a subscription, DNS does not work properly.
The last successful subcription was created Sept 26, 2014.
I thought something ontoward had happened at first so attempted to delete the subscription and re-create.
On attempting to delete the subscription the following error is given
Error: Some of the selected subscriptions were not removed. Unable to remove domain: Error during domain.com removeZone: dnsmng failed: Unknown error 0x80131509 (COM Interop Error 80131509, Description: System.InvalidOperationException: Operation is not valid due to the current state of the object. at System.Management.ManagementObject.Delete(DeleteOptions options) at System.Management.ManagementObject.Delete() at WMIMsDNS.Provider.DeleteRecordsByType(String zone, String type) at WMIMsDNS.Provider.DeleteZone(String zone, UInt32& serial)) at removeZone ZoneName = 'domain.com'Click to expand...
