Can anyone give me some insight on how VPS licensing works with SPLA? According to my reseller, each VPS needs its own standalone license which seem to differ with what I read somewhere about Microsoft Server 2008 allowing up to 8 virtual stances with 1 license or something like that.
Forget everything you've learned about Windows Server "authenticated" and "unauthenticated" licensing for your monthly SPLA reports. The game has completely changed, and NOT for the better.
Microsoft has changed to "outsourcer" and "non-outsourcer" licensing instead.
Quoting Microsoft:
Quote:
"Outsourcing is an application or service that a service provider manages for their customer. For purposes of this definition, the managed application or service is: (a) Used by its customer's employees, contractors, agents, or vendors (b) Not the service provider's intellectual property
I contacted MS directly for clarification on how this applies to webhosting. The response was, if the service provider is (and I quote), "simply managing the infrastructure layer and not managing anything else... in other words just keeping the lights on", that is non-outsourced.
If you are providing any software or management of the environment, even something as simple as Windows Updates or other basic management tasks on the server-- which is the case, for example, if you are running a shared webserver, then it is "outsourced".
Your email server is providing a service that is considered an outsourced service, and you must report (and pay for) an "outsourced" license for that server.
And here is the bad news.
Under the old terms, the Datacenter edition of Windows Server (which allows unlimited VMs at no additional charge on the machine where the license is assigned) cost just under $50/month.
The new "outsourcer" Datacenter license is nearly $250/mo. Yes, you read that right, a whopping 400% monthly license fee increase for Datacenter edition.
A single copy of Windows Server Standard edition is over $75/mo. when used in the outsourcing role.
Other pricing and terms have changed as well, so grab a copy of the new SPUR and READ it. All it takes is a moment of uncertainty to put you wildly out of compliance under this new layer of insanity.
I currently have a server (Xeon 1x5310, 4gb RAM, 4x500gb hdd in Raid 10) with Windows 2003. Now do to a project I'm looking at installing Windows 2008 and upgrading to 2x5310 and 16gb of RAM on my server.
I'm looking to create a virtualized test environment for development of a new web service I'm working on. What I'm looking to develop right now is 2 file servers, 3 web servers, 3 MS SQL database servers and 1 DNS server (would prefer but not sure if hardware can handle it. Virtualization would be ideal as this is very similar to what we believe will we have when we launch the service.
I have a few questions I'm hoping you might be able to answer:
1) With the upgraded hardware specs, should it be able to handle the load if I assign each virtual entity 1 core with 2gb of RAM each?
2) I would like to create each of the multiple servers in a cluster (ie cluster of webservers) as this is how it will be in production. But, I've never worked with clusters before so:
a) where can I learn about clustering windows 2008 servers?
b) is this possible to do in a virtualized environment?
3) How does MS work the licensing? I want to have each server running Windows 2008 and 2-3 of them running SQL Server 2005.
a) Do they charge extra for each virtualized server?
b) Does this mean I have to purchase 3 complete copies of SQL Server or is there a way I can pay a low license fee for use in a non-commercial, non-production environment?
4) Does anyone see any problems with this setup or have any suggestions for me?
* I do have money available to spend on a good solution, so if you have suggestions that cost please let me know. I just thought virtualization would be the way to go as the project will be in development for at least a year with no public access.
** I realize that Hyper-V hasn't been released yet (that I know of) so information on it might be limited
our collocation provider don't sell SPLA windows server licenses and I need to setup a dedicated server with Windows Web Edition, so I'm now looking where can I buy the license for this server, can you tell me who can sell me this kind of license?
I am wondering, when you are offering MSSQL server in a dedicated server, would you quote your customer a Per Subscriber License? or Per CPU license? It has big big differences. What is the common practice? I have an headache studying the complicated license usage details.
Which VmWare product allows me officially to use it for VPS hosting business (ESXi does not allow that)? Do you have a link to document where they specifically authorize use of their software to make and sell VPS? Are there any legal limitations? What about vSphere standard?
What about Xen, what are limitations of free version? Which payed version is best for VPS hosting, are there any legal limitations?
I'm sure this has been covered before, but during my search I didn't find much, maybe someone can point me in the right direction.
Okay, so here's how it goes...
I, and a partner, plan on purchasing a 2U server and we're going to co-locate this server in Chicago. This server will be serving a new gaming company we plan on opening. Now, my main issue is obtaining Windows for this server. I have found plenty of retail CD's with like a 5 CALs included, but that was in the $750-$1000 range, which I understand this is what Windows server really cost, but I believe I could find it cheaper.
Does anyone know the BEST, and preferably the cheapest place to buy Windows Server 2003 (Specifically Standard 64bit - R2) or even an "external" monthly license, if such exist. I am new to the entire Windows Server licensing and pricing stuff, so any information would be very much helpful.
if anyone has an idea of which dedicated provider has the most reasonable prices when it comes to Virtuozzo licensing. I have looked at several and it seems prices vary.
I'm helping one of my clients setup some windows VPS's but we're having some serious confusion as to how the licensing works.
I've read on microsoft.com that they now are far more accepting of virtulization and allow, with a single license, anywhere from 4 to unlimited VPS installs with it.
Now, my question is: Does this count with leased licenses? Say I leased a license from my datacenter (say i did 2k3 STD) for $25/m. Would I then be allowed to install it on however many VPS's allow under MS without issue or how does that exactly work?
From the posts in this forum it would appear that a number of forumites are colocation service providers and web hosters that use Cisco gear.
I was reviewing the Cisco End User License Agreement that was included in the router box. Under the General Limitations section, "Customer shall have no right, and Customer specifically agrees not to:", item (iv) states, "use or permit the Software to be used to perform services for third parties, whether on a service bureau basis or time sharing basis or otherwise, without the express written authorization of Cisco".
Does this mean that a service provider is required to acquire a separate license similar to the Microsoft Service provider license?
My understanding is that the IOS software running in most of their products is non-transferable. So clearly this prevents a user from receiving updates if they purchase used hardware (i.e. ebay). However, isn't it possible to purchase an IOS software license from Cisco for any of their supported product?
Their web site is a mess! I've spent, literally, hours on their site trying to figure out how to purchase such a license, or how to purchase a service plan that might entitle me to IOS updates.
And how does "SMARTnet" fit into this puzzle? Do I need a SMARTnet contract to download maintenance updates, even for *new* hardware that I've purchased?
so let's get this all hashed out... it'll be interesting to see how people handle various situations.
Before responding, let's keep this thread signature free.
I recently came across an issue where a customer wanted to bring their own Microsoft products/licenses to the table. Got a few questions for the other providers out there... this really needs to be hashed out.
Microsoft is very strict when it comes to enforcing their license policies, we all know this much.
So... when a customer wants to install their own software, what do people do to help ensure that whatever agreement you have with your upstream provider or Microsoft isn't in voliation by allowing someone to bring their own licenses?
What steps do you take to ensure validity of said licenses?
How do you define, much less enforce, these guidelines?
What role, if any, should a provider play in doing their part to help stem illicit license abuse?
I bought Windows Vista Ultimate OEM and installed it on the physical machine, can I install Virtual Server 2005 and install the ultimate OEM version again on the VIRTUAL server 2005??
I run MySql but I hate to run it on the physical machine, want to run on a virtual machine.
if I have a dedicated server with WS2003, would I be allowed to install my own software (with license)? such as MS SQL Server - I have an MSDN subscription and multiple licenses.... would this be ok to do so?
What about Exchange Server? I have a License for that also...again, MSDN subscription
What is Microsoft Silverlight? I have a webserver which support .NET 1.1 / 2.0 / 3.0 / 3.5, Does it require to install any thing else for support of Microsoft SilverLight as my clients are asking for Silverlight support.
I have built a web application with visual studio 2008 that uses some improvements and tools like "entity framework", "script manager", "updatepanel" etc.Is it enough for the hosting server to have ".net framework 3.5" installed or "framework 3.5 with SP1" ?. I ll choose hosting company accordingly.
Does anybody use Microsoft LogParser on their 2003 server? I am looking to use this program to find out when a user login via remote desktop and when they logoff. I have found that in Event Viewer the EventID of user login/logoff is 528 or 538. The only thing is that there are multiple logoffs in a row (with the same time for the same user) or the user logs in then out again at the same time right down to the second.
This is the query I was running then importing that data into a database to view/analyze the data:
Code: SELECT ComputerName, EventID, TimeGenerated AS LogTime, STRCAT(STRCAT(EXTRACT_TOKEN (Strings, 1, '|'), ''), EXTRACT_TOKEN(Strings, 0, '|')) AS Username INTO c:logonoff.csv FROM [computer name here]Security WHERE EventID IN (528; 538) AND EventCategoryName = 'Logon/Logoff'
I have a potential client that uses it and ISA is blocking the ports my control panel uses so they need to open up the ports. Anyone know how they can do this? They're not local otherwise I'd just stop by and tinker around until I figure it out.
I've already posted this over at the vBulletin forums and with their tech support team, but so far no one has been able to find a solution. Someone suggested I post here as well.
I am currently running vB using PHP 4.3.9 with Zend WinEnabler on a windows 2003 server. I have a seperate database server and a web server. This current configuration works fine, but I am moving to an upgraded web server and this is where the problems start.
Due to intermitant issues with Zend WinEnabler (now a discontinued product) I wanted to move to the latest version of PHP (5.2.5 NTS) and Microsoft FastCGI. The problem is that I am getting blank pages when clicking the Today's Post link from the top menu and immediately following the submission of a new post. I've gone through all of the vBulletin listed suggestions about trouble shooting blank pages and none apply.
Because I have a seperate database sever, I am accessing the same database with the new server vB configuration I am migrating to. As such I suspect the issue has to be related to web server given there are no issues on the current live site and the only changes are the PHP version and acceleration app.
If anyone has some suggestions, please let me know. I am running out of time on my server migration window before I am going to be billed for two servers.