Plesk 11.x / Linux :: Built-in FTP Server Configuration
Aug 9, 2012
I just installed Plesk 11.0.9 Update #8 on a CentOS Linux Server and found a new FTP-server running and listening on port 21. I wanted to deactivate it or at least change the port number to anything else. But in the config file /etc/xinetd.d/ftp_psa there is a comment:
#DO NOT MODIFY THIS FILE BECAUSE IT WAS GENERATED AUTOMATICALLY,
#SO ALL YOUR CHANGES WILL BE LOST AFTER YOU UPGRADE PARALLELS PLESK PANEL.
So I can't deactivate the FTP-server with the line "disable = yes" because the default file is restored after a while (I can't pinpoint the event when it happened). In the Plesk frontend I can't see any possibility to deactivate the server or change the port.
In the file above, there is mentioned another config file "server_args = -c /etc/proftpd.conf" but changes in that file are ignored for whatever reason. There I changed the port number but without success. It's still listening on 21 even if the file says otherwise.
View 11 Replies
ADVERTISEMENT
Jul 18, 2015
On Plesk 11.5.30 I have just patched with SSLfix.sh. [URL] ......
When I run an ssl check I get - Certificate name mismatch
I am also getting the following message
Unable to generate the web server configuration file on the host because of the following errors:
Template_Exception: apache2: Syntax error on line 211 of /etc/apache2/apache2.conf: Syntax error on line 73 of /etc/apache2/mods-enabled/ssl.conf: </IfModule>SSLHonorCipherOrder without matching <IfModule>SSLHonorCipherOrder section
[Code] .....
View 4 Replies
View Related
Feb 21, 2015
I update the backup of whole server (the file is .xml.tar)
Now how can I restore all my domains, server.configuration and so on?
View 13 Replies
View Related
Jun 21, 2014
I get this error after upgrade from Parallels Plesk 11.5 for Linux to 12.0.18 (Ubuntu 12.04.4 LTS):
Template_Exception: nginx: [emerg] PEM_read_bio_X509_AUX("/opt/psa/var/certificates/certI3Fakms") failed (SSL: error:0906D064EM routinesEM_read_bio:bad base64 decode) nginx: configuration file /etc/nginx/nginx.conf test failed
file: /opt/psa/admin/plib/Template/Writer/Webserver/Abstract.php line: 75 code: 0
Reconfigure all does not work:
web:Execution failed. Command: httpdmng Arguments: Array ( [0] => --reconfigure-all )
Details: Execution failed. Command: httpdmng Arguments: Array ( [0] => --reconfigure-server [1] => -no-restart )
Details: [2014-06-22 02:23:16] ERR [util_exec] proc_close() failed [2014-06-22 02:23:21] ERR [util_exec] proc_close() failed
[Code] .....
View 19 Replies
View Related
Jun 25, 2014
version: Parallels Plesk Panel v11.5.30_build115130819.13
os: centos 6.5 (final)
I recently received this messsage from in my mailbox "Unable to generate the web server configuration file on the host <nsxxxxxxx.ovh.net>" which is coming now every hour for 4 days now.
I first tried to regenerate an apache conf file with the magic on my Centos 6:
# /usr/local/psa/admin/sbin/httpdmng --reconfigure-all
but it gives me this output:
Execution failed.
Command: httpdmng
Arguments: Array
(
[0] => --reconfigure-server
[1] => -no-restart
[Code] .....
At line 10 in my server.conf file I have a bunch of ipv6 address that looks like this:
NameVirtualHost xx.xx.x.xx:80
NameVirtualHost [xxxx:xxxx:8:5b11::1000]:80
NameVirtualHost [xxxx:xxxx:8:5b11::1001]:80
NameVirtualHost [xxxx:xxxx:8:5b11::1002]:80
[Code] ....
View 2 Replies
View Related
Jul 28, 2014
After the last update, I get this error:
Unable to generate the web server configuration file on the host <xxx.de> because of the following errors:
Template_Exception: nginx: [emerg] PEM_read_bio_X509_AUX("/usr/local/psa/var/certificates/certRHXRsQy") failed (SSL: error:0906D064EM routinesEM_read_bio:bad base64 decode)
nginx: configuration file /etc/nginx/nginx.conf test failed
file: /usr/local/psa/admin/plib/Template/Writer/Webserver/Abstract.php
line: 75
code: 0
Please resolve the errors in web server configuration templates and generate the file again.
the websites of my customer are not reachable now....
View 2 Replies
View Related
Dec 17, 2014
I tried to add ac new subscription and this failed.No I have an inconsistent subscription and get the following error: New configuration files for the Apache web server were not created due to the errors in configuration templates:
Template processing failed: file = /opt/psa/admin/ conf/ templates/ default/domainVhost.php,
error = Template_Exception: No data. file: /opt/psa/admin/plib/Template/Processor.php line: 28 code: 0
Previous error: Template_Variable_Exception: No data. file: /opt/psa/admin/plib/Template/Variable/AbstractCachedData.php line: 67 code: 0.
Detailed error descriptions were sent to you by email.click here to generate broken configuration files once again or here to generate all configuration files.
I have Plesk 12.0.18 on Ubuntu
View 1 Replies
View Related
Aug 31, 2014
I have some error with my server. All my sites are inaccessible.
Code:
Template_Exception: nginx: [emerg] SSL_CTX_use_PrivateKey_file("/opt/psa/var/certificates/cert-ao0glw") failed (SSL: error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error:Type=X509_ALGOR error:0D08303A:asn1 encoding routines:ASN1_TEMPLATE_NOEXP_D2I:nested asn1 error:Field=pkeyalg, Type=PKCS8_PRIV_KEY_INFO error:0907B00D:PEM
[Code] .....
View 2 Replies
View Related
Feb 25, 2015
I have a new CentOS 7, with Plesk 12, CentOS 7 by default has XFS filesystem.
I try migrate sites from another Plesk Server but Plesk agent say: "hard disk quota is not supported due to configuration of server file system" (my CentOS 7)
My CentOS7:
CentOS Linux 7.0.1406 64 bits
Plesk 12.0.36
My fstab
[root@ns ~]$ cat /etc/fstab
/dev/mapper/centos-root / xfs defaults,usrquota,grpquota 1 1
UUID=ba391bd5-786c-4ae7-8bbd-f36f831ae6eb /boot xfs defaults 1 2
/dev/mapper/centos-swap swap swap defaults 0 0
I added "usrquota,grpquota", then mount -o remount / ; but when I try quotacheck -fmv / I gest this:
[root@ns ~]$ quotacheck -fmv /
quotacheck: Skipping /dev/mapper/centos-root [/]
quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
but quotaon command works:
[root@ns ~]$ quotaon /
quotaon: Enforcing group quota already on /dev/mapper/centos-root
quotaon: Enforcing user quota already on /dev/mapper/centos-root
The problem here is why Plesk does not recognize quotas as enabled on CentOS 7??
If I try this command it seems good:
[root@ns ~]$ /usr/local/psa/admin/sbin/usermng --isquotable
0
Also I do this:
- Disabled Selinux
- Check all packages as quota, etc.
I have been using some reference: [URL] ....
View 11 Replies
View Related
Oct 24, 2014
Where the file that holds PHP fastcgi configuration is located. I was told its here but it's not
/etc/nginx/conf.d/*.conf.
View 3 Replies
View Related
Apr 23, 2015
Reset postfix configuration in plesk 12? I have some misconfiguration on smtp banner and hostname so I prefer to reset all.
View 6 Replies
View Related
Jul 16, 2014
Trying to enable CORS (cross-origin resource sharing)? I've tried just about everything with the NGINX conf files and individual conf files, but nothing seems to be working...
View 1 Replies
View Related
Jun 25, 2015
PRODUCT, VERSION, OPERATING SYSTEM, ARCHITECTURE
Parallels Plesk Panel 12.0.18 MU #51 CentOS 6.6 (Final)
PROBLEM DESCRIPTION
The following error has started to appear on our server: New configuration files for the Apache web server were not created due to the errors in configuration templates: Template processing failed: file = /usr/local/psa/admin/conf/templates/default/nginxDomainVhost.php, error = Template_Exception: Empty content was provided for config file /var/www/vhosts/system/domain/conf/nginx.conf file: /usr/local/psa/admin/plib/Template/Writer/Webserver/Abstract.php line: 47 code: 0. Detailed error descriptions were sent to you by email. Please resolve the issues and click here to generate broken configuration files once again or here to generate all configuration files.
STEPS TO REPRODUCE
Appears on the plesk home page
ACTUAL RESULT
Error displaying as above
EXPECTED RESULT
No error should be displaying, I haven't seen this before and we didn't receive an email with error descriptions. Is it safe to regenerate the broken config files / all of them? t
View 2 Replies
View Related
Mar 25, 2015
I installed another php version a while ago. Today I am trying to add ImageMagick to this php version but after launching the following command
Code:
./configure '--with-libdir=lib64' '--cache-file=../config.cache' '--prefix=/usr/local/php-5.6.5' '--with-config-file-path=/usr/local/php-5.6.5/etc' '--disable-debug' '--with-pic' '--disable-rpath' '--enable-fastcgi' '--with-bz2' '--with-curl' '--with-freetype-dir=/usr/local/php-5.6.5' '--with-png-dir=/usr/local/php-5.6.5' '--enable-gd-native-ttf'
[Code] ....
It sends me back this error configure:
Code:
WARNING: unrecognized options: --enable-fastcgi, --enable-imagick
View 1 Replies
View Related
Dec 27, 2014
I would like to add spdy under all nginx configuration as below
listen 443 ssl spdy;
How to add them globally ?
View 4 Replies
View Related
Jun 5, 2014
I have following problem when I try to cange the configuration file for Nginx in Plesk.
Details:
- Using Wordpress
- vServer
- PHP is handled through Nginx
- Memcached is enabled
To use the caching plugin "Cachify" in combination with memcached, the nginx configuration file must be edited. Following config should be used:
Code:
## GZIP
gzip_static on;
## CHARSET
charset utf-8;
## INDEX LOCATION
location / {
error_page 405 = @nocache;
[Code] ....
When I try to save the new config, following error appears:
Invalid nginx configuration: nginx: [emerg] duplicate location "/" in /var/www/vhosts/systemmydomain/conf/vhost_nginx.conf:8 nginx: configuration file /etc/nginx/nginx.conf test failed
How can I use the necessary configuration? I used google before, but some people said, that the server templated needs to be edited?
View 1 Replies
View Related
Feb 18, 2015
Yesterday I migrated a domain with the migration tool from a Debian 7.6 Plesk 12.0.18 MU35 box to a Debian 7.6 Plesk 12.0.18 MU35 box
This domain have a simple DNS configuration. The A registry for the domain.com was an own IP instead the IP of the server. Rest of the DNS configuration was the same.
After migration the A registry for the domain.com was an own IP too (as expected) but also the A registry for mail.domain.com
Before migration, in the old server:
A domain.com x.x.x.x (own ip)
A mail.domain.com y.y.y.y (server ip)
After migration, in the new server:
A domain.com x.x.x.x
A mail.domain.com x.x.x.x
The migration had changed the IP for mail.domain.com for the IP of the A registry for domain.com
Very strange. I double-checked it (as the domain in the "old" server was suspended)
Client don´t have access to the control panel, so no changes done.
View 4 Replies
View Related
Dec 6, 2014
When i go to https://ip:8447 i get the error
Can't connect to backend: No such file or directory
The source is locked and the "Store installation files in directory" is empty and i cant change it. The source gives an explantation:
"This field was locked by vendor. Enable it by removing 'SOURCE' option from Parallels Installer configuration file."
But where is the Installer configuration? I think i might have deleted this by accident and comparing files with another server didnt gave result.
[URL] .... doesn't list it either
/usr/local/psa/admin/sbin/autoinstaller
also doesn't have an option to get the current or default config.
View 10 Replies
View Related
Jun 16, 2014
I am running a VPS through 123-REG, Plesk version 11.0.9 with CentOS 6.4
I host 3 websites of my own (with 14 mail accounts)
4 websites for clients (with 10 mail accounts)
7 websites for clients (with 0 mail accounts)
The problem I have had in the last 2 weeks is that the server has been compromised once again by spammers.
2 weeks ago we had another instance and the support was even worse than before, I decided that the best way forward after irradicating the problem and correcting the source, and in the interest of each of my clients I decided to asign each client with their own IP address in the vain hope that if one client account is compromised the others will not be affected, 123-REG agreed that this is a solid solution so I purchased 5 additional IP addresses for the clients I host mail accounts for, (all of the said addresses were blacklisted when I was given them!!!) the reverse DNS was not set up correctly, and couldn't be through their control panel and some didn't match the SMTP banners, then I found out through them that the mail was still sent out through the Primary IP address anyway so if one client gets blacklisted they all still do.
Now they tell me that I can in fact configure Plesk to use each IP address for each client exclusively and they sent me a link to a support article that doesn't actually tell me how to do it.
I can do the following so far:
Log into puTTY and use the command: nano /etc/postfix/master.cf
Find the "smtp" record referenced in the article [URL]
1.1.1.1- unix - n n - - smtp -o smtp_bind_address=1.1.1.1 -o smtp_bind_address6= -o smtp_address_preference=ipv4
2.2.2.2- unix - n n - - smtp -o smtp_bind_address=2.2.2.2 -o smtp_bind_address6= -o smtp_address_preference=ipv4
although mine looks like the one below:
1.1.1.1- unix - n n - - smtp -o smtp_bind_address=1.1.1.1 -o smtp_b$
Is there something missing from the entry I have?
Assuming that 1.1.1.1 = the relevant IP Address for the client do I need to create an entry for each of my IP addresses?
Do I need to do anything with SMTP banners? If so how do I do it, and what do I need to do?
The article also mentions the default settings being restored each time you reconfigure mail settings and to consider a scheduled task, does that mean each time I set up a new mail account or a new client as I assume that I will need to repeat these steps in that case anyway, mainly because they will have a unique IP address that needs to be set up.
View 1 Replies
View Related
Mar 8, 2015
Plesk Panel 12 uses a proftpd FTP server, with the TLS module pre-installed and configured.
Many questions and/or problems arise when trying to connect to the FTP server over a FTPS connection. In (almost) all cases, the disability to connect with FTPS is due to
a) the lack of configuration of passive ports, AND
b) firewall settings, enabling connections through before mentioned passive ports.
The passive port range can be configured by
adding a line to /etc/proftpd.conf, stating: "PassivePorts <start> <end>", OR
adding a separate file with name <filename>.conf to /etc/proftpd.d/, with the contents of <filename>.conf stating: "PassivePorts <start> <end>"
And note that
- <start> is the first port of the port range, in theory any value above 1050 can suffice,
- <end> is the last port of the port range, any value below 65000 (!) can suffice,
- the extension .conf is required when using a separate config file,
- the directory location /etc/proftpd.d/ is required when using a separate config file,
- one should always limit the port range, i.e. it is not desirable to open up a lot of ports,
- it is desirable to have the <start> value above 20000, in order to prevent conflicts with other programs, using a specific port (for instance, port 8443 is also being used),
- it is not necessary to restart proftpd after configuring the passive ports.
The firewall settings have to be changed to allow connections through the passive ports that have been opened for FTPS connections and note that
- only open up the port range (not more) in the firewall settings,
- it is only necessary to open up ports in the firewall settings of the FTP server,
- it is not required to open up ports in the firewall settings of the sending server.
Many issues have been arising when setting up the FTP Backup Repository.
In general, the passive mode checkbox has to be selected, when encountering issues.
The explicit use of the passive mode allows for proper configuration of the FTP Backup Repository and note that it does not matter whether FTPS or normal FTP will be used.
View 1 Replies
View Related
Mar 9, 2014
I'm experiencing some issue with the php function mail(). No mails can get out and no errors from php. Is there any menu where we can parameter this php function ? Do I need to check up some services ?
CentOS 6.5 with Plesk 11.5
Fresh install
View 15 Replies
View Related
May 7, 2015
When I specify log rotation settings for domain xyz.com in Plesk panel I expect them to be saved in /etc/logrotate.d/xyz.com file, at least this is the expected behaviour according to Plesk12 Admin Guide: [URL] ....
Apparently, it doesn't happen and I don't have xyz.com file in /etc/logrotate.d/
Log rotation doesn't seem to work either, at least it doesn't work for error.log
I read somewhere that log rotation feature has to be specially enabled in Plesk but I couldn't find specifics anywhere.
View 2 Replies
View Related
Jul 8, 2014
I am unable to disable or modify the firewall by using the plesk firewall extention. Plesk throw the two errors below:
Code:
Error: Could not disable firewall:
util_exec(.., 'proc_open') failed: file does not exist or is not executable: /opt/psa/admin/bin/modules/firewall/register_service
Code:
Error: Could not activate firewall configuration:
util_exec(.., 'proc_open') failed: file does not exist or is not executable: /opt/psa/admin/bin/modules/firewall/safeact
I checked the symlinks, they point to the same location: /opt/psa/admin/bin/modules/firewall/mod_wrapper
-r-s--x--- 1 root root 18896 Jun 6 10:37 mod_wrapper
View 2 Replies
View Related
May 21, 2015
I run a virtual server (Ubuntu 12.04, Plesk 12, Postfix 2.9.6) using plesk to manage multiple domains. The server address is server.domain1.com. I use plesk to also manage domain1.com regarding all services, including DNS and mail.
What I just found is that postfix sometimes issues the following warning:
server postfix/trivial-rewrite[7397]: warning: do not list domain server.domain1.com in BOTH mydestination and virtual_alias_domains
The essential part of my main.cf is:
myhostname = server.domain1.com
mydestination = localhost.$mydomain, localhost.localdomain, localhost
virtual_mailbox_domains = $virtual_mailbox_maps, hash:/var/spool/postfix/plesk/virtual_domains
virtual_alias_maps = $virtual_maps, hash:/var/spool/postfix/plesk/virtual
virtual_mailbox_maps = , hash:/var/spool/postfix/plesk/vmailbox
virtual_transport = plesk_virtual
And /var/spool/postfix/plesk/virtual_domains contains amongst others:
domain1.com domain1.com/
I do not have any issues with receiving or sending e-mails right now, but would like to get rid of the error message however.
Could it be the problem that postfix automatically sets mydomain to $myhostname with skipping the first part (i.e., mydomain is implicitly set to domain1.com)? Should I manually set mydomain to server.domain1.com instead? Any other recommendations? Since mydomain seems to be used in multiple options [URL] ..., I wonder what I might destroy with changing this? As all mail services run without any further troubles at the moment, I don't want to break this...
As I assume that quite some people use a plesk-based server to manage the domain to which the server itself belongs to, I would assume that there should be a general fix/check to updated mydomain accordingly?
View 3 Replies
View Related
Mar 23, 2015
I have only tried to "switch on" the jail item "apache-badbots" and get a red box with:
Unable to switch on the selected jails: f2bmng failed: ERROR No file(s) found for glob /var/www/*/logs/access_log
ERROR Failed during configuration: Have not found any log file for apache-badbots jail
ERROR:f2bmng:Command '['/usr/bin/fail2ban-client', 'reload']' returned non-zero exit status 255
ERROR:f2bmng:Failed to reload following jails due to errors in configuration
.Click to expand...
View 8 Replies
View Related
Aug 31, 2013
I just installed the Health Monitor add-on in a brand new Plesk 11.5.30 on CentOS 6.4 but all that it's area in Plesk displays is this funky looking error:
{"status":"error","statusMessages":[{"status":"error","class":"","content":"Unable to load configuration file.Click to expand...
View 11 Replies
View Related
Apr 27, 2015
I have a one problem in my server . I use in Parallels Plesk v12.0.18_build1200140606.15 os_CentOS 6 I vps in systemOS CentOS6.6 Final Minimal and installing plesk health monitor show error in :
{"status":"error","statusMessages":[{"status":"error","class":"","content":"Unable to load configuration file.
And I try the command
/usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/scripts/setup-health-monitor.php
output problem is :
Error: Unable to read /proc/partitions
View 11 Replies
View Related
Oct 21, 2014
Is there any way to give a reseller or customer access to the php custom settings box labeled "Additional configuration directives" on the website & domains -> php settings button that an admin can see and alter? We have attempted to give resellers the "Common PHP settings management" and "Setup of potentially insecure web scripting options that override provider's policy" options, but it still does not show up to a reseller.
View 1 Replies
View Related
Apr 27, 2015
I have a Server with Centos7 + Plesk 12 and in the service configuration say that the Bind service is not installed, from command line i have install named services and make a manual configuration the first domain, but when I return to the service page in plesk... the problem is the same, the Bind Service is not installed; then the problem is when i want create a new hosting i need to go to the ssh to make the DNS configuration...
View 1 Replies
View Related
Dec 3, 2008
I just built a new pc, everything works well, but sometimes my computer will just restart randomly, it doesnt happen immedietly but randomly, within 30 or more minutes operating. Any ideas to why? and how i can fix it? ...
View 12 Replies
View Related
Jun 28, 2007
I realise that a lot of providers build theirs from parts, but I was wondering where I could find some cheap low - mid range servers already built (or at least with the case etc).
I have tried searching eBay, but it's difficult to find what I am looking for. Are there any large companies out there? I am from Australia, and from what I can see there aren't really any around from here. (Looking for an upgrade for my colo).
View 10 Replies
View Related
