Trying to enable CORS (cross-origin resource sharing)? I've tried just about everything with the NGINX conf files and individual conf files, but nothing seems to be working...
View 1 RepliesI would like to add spdy under all nginx configuration as below
listen 443 ssl spdy;
How to add them globally ?
I have following problem when I try to cange the configuration file for Nginx in Plesk.
Details:
- Using Wordpress
- vServer
- PHP is handled through Nginx
- Memcached is enabled
To use the caching plugin "Cachify" in combination with memcached, the nginx configuration file must be edited. Following config should be used:
Code:
## GZIP
gzip_static on;
## CHARSET
charset utf-8;
## INDEX LOCATION
location / {
error_page 405 = @nocache;
[Code] ....
When I try to save the new config, following error appears:
Invalid nginx configuration: nginx: [emerg] duplicate location "/" in /var/www/vhosts/systemmydomain/conf/vhost_nginx.conf:8 nginx: configuration file /etc/nginx/nginx.conf test failed
How can I use the necessary configuration? I used google before, but some people said, that the server templated needs to be edited?
Today at 12.50 pm my (ubuntu 14.04.1 LTS) server running plesk 12.0.18 suddenly stopped serving websites. Any attempts to access a webpage on any vhost returned the 502 bad gateway using Nginx error messsage.When I looked at the nginx logs, I found messages like:
2014/10/30 14:48:00 [error] 3099#0: *101 connect() failed (111:
Connection refused) while connecting to upstream, client: m.m.m.m, server: , request: "GET /server-status HTTP/1.0", upstream: URL....
Restarting apache & nginx (/etc/init.d/apache2 restart & /etc/init.d/nginx restart) made no difference and I had to reboot to restore http access.
Strangely if I browsed with port 7080 specified (i.e. http://n.n.n.n:7080), this worked fine for all vhosts, so apache (which I believe is listening on this port while nginx listens on port 80) is working fine - nginx is just not able to pass stuff to it?
My current version of nginx in plesk 11.5.44 is 1.5.0 and i would like to update it to the latest stable version which is 1.6.0. However, i cannot seem to manage to do so. I tried with yum update nginx but i receive Package(s) nginx available, but not installed.
View 1 Replies View RelatedI running magento on plesk 12 and trying to configure nginx, but only home page is working and all other pages are not working with error 404.
View 6 Replies View Relatedthis is a fresh Plesk 12 installation on a Dedicated Server, on Debian 6. I haven't installed a License key yet.When i tried to run MIgration Manager, the loading was taking forever. Also, when i try to enter Webserver Configurations Troubleshooter, i get 502 Bad Gateway nginx error.In the /var/log/sw-cp-server/error_log i get this error:
Code:
2015/06/17 11:42:47 [error] 3918#0: *52 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D, server: , request: "GET /modules/configurations-troubleshooter/index.php/index/list HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/admin/module/list?context=modules"
When i try to insert a Plesk License, i also get this error:
Code:
2015/06/17 10:29:17 [error] 5643#0: *81 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D., server: , request: "POST /server/
key_upload.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/server/key_upload.php"
I followed this KB article 118757 but no luck. Also, the server resources are at the lowest usage and there is >2 TB disk space available.
My server admin already upgraded my OpenSSL to version 1.0.1m 19 Mar 2015 and he also upgraded Nginx to 1.6. I'm also running CentOS v5.11 and Plesk v11.5.
However, he tells me that he still can't get TLS 1.2 to work because he noticed that my server uses a different version of Nginx (sw-nginx), which he believes is part of Plesk. How we can get TLS 1.2 working on the Plesk copy of Nginx (sw-nginx)?
We have a problem with a magento website. Often (perhaps when we use administration), we have the message "502 Bad Gateway nginx".
We have added server instructions in Plesk Nginx:
proxy_buffers 16 16k;
proxy_buffer_size 32k;
fastcgi_buffer_size 32k;
fastcgi_buffers 16 12k;
But we have still the problem.
We have tried :
[URL] ....
And
[URL] ....
Without results...
The log file say:
[client x.x.x.x] client denied by server configuration: /var/www/vhosts/domain.com/httpdocs/app/etc/local.xml
x.x.x.x is the website IP.
Plesk 12 will not do it and if you reinstall it you get errors after installation. Maybe a bug but seems nobody is interested in answering my question before.
I tried to remove by
apt-get remove --purge sw-nginx
dpkg -r sw-ningx
Both of them display that is removed but after a new installation are the folders not created and maybe old files not overwritten if not deleted.
I wanted to activate nginx on my server als describes on [URL] ...
Installing was no problem, but when i try to enable nginx, I always get errors:
/usr/local/psa/admin/sbin/nginxmng -e
[2015-05-20 10:42:36] ERR [util_exec] proc_close() failed
Error occured while sending feedback. HTTP code returned: 502
[2015-05-20 10:42:37] ERR [util_exec] proc_close() failed
[Code] ....
Is here a tutorial special for plesk 12 that show me how set nginx to show real visitor ip in access_log and php?
Actual nginx show for IPv6 visitors the own server IPv6 in access_log and php.
how is it possible that after an update my main site is down? This site: www.orderhosting.it has plesk Panel and I have 20 sites. They work perfectly but my main site is off. I think there is an error in the configuration because:
[root@orderhosting ~]# grep -r 199.99.36.73 /etc/nginx/
[root@orderhosting ~]#
This is strange.Error log does not report any errors, only this: [warn] RSA server certificate CommonName (CN) `Parallels Panel' does NOT match server name!?
how to change ports of Nginx from 80 to 8080 I would like install Varnish
View 2 Replies View RelatedI have upgraded from 10 to 12 and now I have "502 Bad Gateway nginx" error. I have atached logas..
View 1 Replies View Relatedi went to server setting and checked manage php with nginx then start getting 404 Not Found nginx. It was clear that it s a problem with the wordpress permanent links so i went in wordpress back-end and switched to default links then it start working but when i switched to permanent link againi got the previous error again
I searched for a while on internet and i found . URL.... So the problem that i have is that i added this piece of code manually in : /var/www/vhosts/system/domaine.com/conf/nginx.conf....Since it s mentioned above
#ATTENTION!
#
#DO NOT MODIFY THIS FILE BECAUSE IT WAS GENERATED AUTOMATICALLY,
#SO ALL YOUR CHANGES WILL BE LOST THE NEXT TIME THE FILE IS GENERATED.
I have a server with the latest version of plesk and centos.
The main site is Articoli Promozionali
Until now kept on the server active both apache and nginx.
Tonight I tried to disable apache leaving only nginx.
That raises the error: 502 bad gateway NGINX at all sites on that server.
To use nginx i need to keep active apache?
What can cause that error?
I am trying to add the following nginx configuration to Plesk through
Website & Domains -> Web Server Settings
The conf i am adding is:
location /folder/folder/ { try_files $uri /folder1/folder2/file.php; }
or
location ^~ /folder/folder/ { try_files $uri /folder1/folder2/file.php; }
but it doesn't seem to be working.
gives 404
I have installed the nginx on my server and want to activate it for all my domains, to do this, i have to do it manually for each domains. But there should be an easier way. Apache uses too much ram.
View 7 Replies View RelatedI have a problem with Nginx on myPlesk 12 with wildcard dns.I want subdomains URl to be like root domain url. Exemple. URL...You can see a live exemple here: URL.... give error 404 instead of showing root domain file (URL....). It's the same for images.What specific rule I must add in plesk panel?
View 5 Replies View RelatedUsing Plesk 12 on a VPS with Ubuntu 12.04 LTS. In the Web Server Settings, if I select "Process PHP by nginx", then the URL "<domain>/plesk-stat/webstat/" is answered by Nginx with "404 Not Found". Having sniffed around, it seems:
/var/www/vhosts/system/VHOST/statistics/webstat is getting statistics gathered.I can't say if they are complete, or even sensible, but things are happening there.The various Alias and other statements required for access to AWStats via Apache are contained in the Apache config file /var/www /vhosts/system/VHOST/conf/last_httpd.conf..But no equivalent statements are generated in /var/www/vhosts/system/VHOST/conf/last_nginx.conf.
i have installed today Reverse Proxy Nginx on Plesk 12. After have activing Nginx, website show "no data received".
Nginx error.log:
PHP: no "ssl_certificate" is defined in server listening on SSL port while SSL handshaking-----conflicting server name
When I reboot my centOS 6.5 + Plesk 11.5 server, Nginx doesn't start and every time I need to go to Server > IP Addresses and click Reread IP.Then Plesk says that need to repair one of these ips, I click repair and then Nginx can start. ( I have 3 ips [2 ipv4 and 1 ipv6] )
View 3 Replies View RelatedAs the title says: How do I switch to NGINX only as my web server, while disabling/removing apache in Plesk?
View 2 Replies View RelatedI need changing the nginx port. I've followed various threads and have created a custom nginxDomainVirtualHost.php file at: /usr/local/psa/admin/conf/templates/custom/domain, while the website indeed moves to the port I have set, a second nginx thread starts at port 80 and takes over in it's place.
I need to put varnish at port 80 and cannot do so until all services relinquish control on port 80.
Followed clues here: [URL] ....
some here: [URL] .....
Turn's out to be able to change the nginx port to a non-standard port you need to edit 6 files
nginx.php
nginxDomainForwarding.php
nginxDomainForwardingIpDefault.php
nginxDomainVhost.php
nginxDomainVhostIpDefault.php
nginxWebmail.php
For the time being i disabled SSL support for my test domain as I didn't need it. The line you need to look for the in above files is:
Code:
$VAR->server->nginx->httpPort
So the line would finally become from this:
Code:
<?php echo $VAR->includeTemplate('server/nginxVhosts.php', array(
'ssl' => false,
'frontendPort' => $VAR->server->nginx->httpPort,
'backendPort' => $VAR->server->webserver->httpPort,
)) ?>
to this:
Code:
<?php echo $VAR->includeTemplate('server/nginxVhosts.php', array(
'ssl' => false,
'frontendPort' => "8888",
'backendPort' => $VAR->server->webserver->httpPort,
)) ?>
To get this to work you'll need to create a custom directory at: /usr/local/psa/admin/conf/templates
And copy the files over from the root of /usr/local/psa/admin/conf/templates/default
i've set up a new Debian 7 server with Plesk 12. After the basic configuration, i've installed nginx via Plesk updater.Now, when restarting the whole server, nginx doesnt start for some reason. Plesk shows it as running, but `service nginx status` shows, that it isnt running. But an `nginx.pid` exists in /var/run, but it's empty.
However, starting it manually via `service nginx start` works fine without any error.I've already tried `update-rc.d nginx remove && update-rc.d nginx defaults` but without any success. I've also tried another init script, but same results.
I've got VPS from OVH and on all my websites have problem. Any graphics / layouts / themes are not displayed but only texts and links on white background.
For example see this:
gderesz.co.uk (WordPress)
gadgetmates.uk (OpenCart).
Don't know why. I was doing nothing this night on my server. I'm just uploaded new image file with screenshoot from wordpress admin panel here: [URL] ....
404 Not Found
nginx
Fail.
[URL]....
I installed Nginx and PHP-FPM through the Plesk Autoinstaller.It works well with the default PHP version installed originally with the CentOS 6 system (5.3.3). I also installed manually following your KB [URL] .... additional versions of PHP. It works well, and I can use those additional versions through the Plesk UI.
Therefore, I was wondering how to use them with PHP-FPM? As when I activate a domain for Nginx with PHP process (PHP-FPM), it switches the PHP version to 5.3.3 and I can't change this parameter.
i have plesk panel 12 ... in the last few days there was a automatically update from plesk for my strato v-server.
After this update i got the message: 502 Bad GateWay - nginx when I will connect to my plesk login ...
all websites etc works fine but i can't login ...
I am a non-tech person trying to configure Nginx to serve static content (apache will remain on port 80 for the dynamic stuff).
Nginx is already installed, what I need is a workable configuration file for nginx so that it serves all static stuff (images and a few folders with static html) and instructions in how to create it. The server is running DirectAdmin panel, Apache 2.24, PHP 5.23 and XCache 1.2.
What exact file to modify in order to optimize fastcgi settings, then to set default for all websites. Sample code below:
# execute all .php files via php-fpm
location ~ .php$ {
# connect to a unix domain-socket:
fastcgi_pass unix:/var/run/php5-fpm.sock;
fastcgi_index index.php;
[Code] ....