Referencing this article [URL] ....
What does integration with Amazon Route 53 mean? We can use the Plesk DNS panel and it will update Amazon Route 53? Is it an all or nothing, meaning can we choose Amz R 53 for some domains and local DNS (bind) on others?
I have been stuck on a rather annoying issue using the Route53.php script included within the Plesk Extensions SDK - [URL] ....
Instructions were followed from [URL] .... but there are obvious confusions with the instructions.
First, it never mentions that within Server Management - Extensions you can load the extension and within the AWS Route 53 extension settings and you are prompted to enter in your identifying security keys. But the instructions ask to code these keys into the actual script, must this be done in both places??
Second, how does it operate?? After I install the extension/script must anything else take place? Do I register private dns addresses using my Route 53 ips and the rest is automatic? Should more information be added within the Plesk DNS template area or can I just turn off the DNS/Bind server and only utilize Route 53? There is no feedback in the UI letting you know it is actually on and working.
Third, I have tried to install the script in ssh and I always receive error:
ERR (3) [panel]: PHP Fatal error: Class 'pm_Loader' not found in /......./modules/route53/scripts/route53.php on line 8 I stumbled on a thread discussing this bug at [URL] .... but it leads to a dead end with the author withholding what the bug fix was and how to achieve it.
we utilize AWS Route 53 for a majority of our domains.
PRODUCT, VERSION, MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE
Parallels Plesk Panel v11.5.30_build115130819.13 os_CentOS 6
PROBLEM DESCRIPTION
Unable to integrate Amazon Route 53, vague instructions even for a developer.
STEPS TO REPRODUCE
[URL] ....
ACTUAL RESULT
ERR (3) [panel]: PHP Fatal error: Class 'pm_Loader' not found in /../../.../modules/route53/scripts/route53.php on line 8
EXPECTED RESULT
errorcode0 in ssh and some indication the extension is working properly within the Plesk Panel UI.
I've run into a problem with my Plesk install with Amazon Route 53. I have the latest extension installed (version 1.2 release 2) on Parallels Plesk v12.0.18_build1200140811.16 os_CentOS 7.
The extension has been working perfectly well for me for months. I was adding new domains to Plesk and discovered that as I was making changes to DNS records that a new zone file was created on Route 53 instead of updating the original one.
I did notice that this started happening when I surpassed the 100 domain limit and seems to only happen on domains created at #101 and on. (in other words, I can edit a domain that was created before I got to domain #100 [ie domain #1] and it does not create a duplicate zone file).
I turned on debug mode for plesk and am seeing the json calls with the correct commands coming through.
Redacted sample of an update of Domain #104
[2015-06-10 16:42:43] INFO [panel] The domain alias <b>mydomain.test</b> was created.
[2015-06-10 16:42:43] DEBUG [util_exec] [5578bd6355bc3] Starting: dnsmng /usr/local/psa/admin/bin/dnsmng '--update' 'mydomain.test'
[2015-06-10 16:42:43] DEBUG [util_exec] [5578bd6355bc3] Finished in 0.06322s, Result: TRUE
[Code] .....
So from what I can see the domain +100 is re-creating the domain whereas domain 1 is not - it's just updating it, even though both json commands show the update statement coming through.
I'm trying to integrate AWS Route 53 DNS service with Plesk 11 but cant get it to work after carefully following the steps in the administrator and developing extensions guides.
View 19 Replies View RelatedI'm new user for parallels and plesk. I new install plesk 12 for my hosting provider but i have problem step by step integration whmcs.
View 2 Replies View Relatedwe have Plesk Version 11.0.9 and I have the following Problem:
(all adresses are examples)
The Server hostet the following Domains and thay all send Mails too:
a.de
b.de
Now I need the following:
If the user "some.user@b.de" send a E-Mail to "user@mydomain.de" the recipient of the Mail have to be changed to "user@mx.mydomain.de". But if "some.user@a.de" do the same, the recipient should not be changed.
I have 2 IPs for my vServer. Plesk automatically add both addresses to the Plesk Panel. One of the ip address I want to use for another service (openvpn). The Problem is, that i can't delete the IP from the Plesk panel.
I got the message: Fehler: String was provided for unescaped parameter host.
There are no reseller or customers who use this IP. So how can i solve this problem and delete the IP from the Panel?
Using Plesk 12.0.18
I want to upgrade to Plesk 12, but want to make sure current version of 11.5.30 is working properly.Whenever Plesk tried to update I get the following error.Installing packages
Loaded plugins: fastestmirror, priorities, refresh-packagekit
Loading mirror speeds from cached hostfile
* atomic: www5.atomicorp.com
* epel: mirror.compevo.com
437 packages excluded due to repository priority protections
[code]....
Fatal error during packages installation: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository. YumBaseError: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package. Check that the correct key URLs are configured for this repository.
ERROR: Failed to run the Yum utility.The Yum utility failed to install the required packages.
Does Plesk's own server, "sw-cp-server" use a different PHP binary than is used for hosted sites?I've found the .ini, /usr/local/psa/admin/conf/, but I can't figure out where the binary would be? I'm trying to run some WP-CLI commands, but some functions I have disabled in the default PHP.ini are required by WP-CLI.
View 2 Replies View RelatedI have several clients still using WinXP. How do I disable SNI for SSL certificates ( and just use old IP way )?
View 18 Replies View RelatedAfter having some issues with my server mail program i read an article online where i though removing psa-courier-imap will resolve my mail problems.
Now nor my email is working but also i lost my plesk panel. Going to plesk ip address there's nothing anymore.Checked my server and is printing i have plesk 11.0.9 installed but is nowhere to find. I try to install psa-courier-imap again but yum cant find it.
Everything working on the server including all sites are available on the web.The only think i'm missing is the Plesk login page.
ERROR: Zend_Db_Statement_Exception: SQLSTATE[HY000]:
General error: 126 Incorrect key file for table '/tmp/#sql_50f_0.MYI'; try to repair it (Pdo.php:234)
After upgrading to v12 i have no access to the plesk panel. The message above is shown.
I just created a new Domain "bernhardlinz.de" at the
Plesk Panel -> Websites & Domains -> Add new Domain
After the Creation the new Domain does not appear under "Websites & Domains".
I check the domain with
Code:
/usr/local/psa/bin/domain -i bernhardlinz.de
And all looks fine like my other, older domains:
Code:
General
=============================
Domain name: bernhardlinz.de
Owner's contact name: Bernhard Linz (admin)
Domain status: OK
[Code] ....
I can see the domain under "Mails" and also create new mail accounts. There are no Errors for this under
Code:
/usr/local/psa/admin/logs/panel.log
As i try to add the domain first i got a
Code:
[11-Jul-2014 21:41:35 Europe/Berlin] PleskUtilException: mailmng-outgoing failed: ERROR:outgoing:database disk image is malformed
Which I removed with the
Code:
/usr/local/psa/admin/sbin/mchk
Command I found in the Plesk forum. After that i could add the domain.
I try a add another fantasy domain - also works but alos not displaying in Panel "Websites & Domains"
I take a look at the Plesk-Database "psa" with the Build-In "phpMyAdmin"
I take a look at the table "domains" and it looks like the other entries.
The Server was restored a few days before from a Backup. After the restore i had have the problem the "mysql" service did not start. I fixed the problem with the description from [URL] ... (Start mysql in recoverymode, export all data, delete the content of the whole mysql folder /var/lib/mysql folder, init new database and import the exported data). After that all looks fine.
Following the update from 11 to Plesk 12 (and installing latest Ubuntu fixes), the Plesk panel access is broken. Welcome page says:Can not load key: key is empty.And of course, no way to login the mgt interface. All services appear up, so this is only affecting the panel web service.
Fishing out the panel.log, it appears to be at a lower level than I initially thought (see below): experiencing issues after updating from 11 to 12 on Ubuntu (12)?
[18-May-2015 19:46:34 Europe/Berlin] PHP Warning: file_get_contents(/opt/psa/var/sso.sp.pem): failed to open stream: No such file or directory; File: /opt/psa/admin/externals/xmlseclibs.php, Line: 285
[18-May-2015 19:46:34 Europe/Berlin] Exception: PHP Warning: file_get_contents(/opt/psa/var/sso.sp.pem): failed to open stream: No such file or directory; File: /opt/psa/admin/externals/xmlseclibs.php, Line: 285
file: /opt/psa/admin/plib/Smb/Exception/Syntax.php
line: 56
[code]..
PRODUCT, VERSION, MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE
11.5.30 Update #44, Ubuntu precise 64bit
PROBLEM DESCRIPTION
Upgrade fails with message: Failed to update Panel.you can send the update log to Parallels support. View the update logs (May 22, 2014). Copy the logs to your computer before you close this message.
On one CentOS 6.5 Plesk 12.0.18 install (with all MUs applied) each time an admin logs in a notification is displayed ("Plesk was successfully updated. View detailed information on the updates.") and once a week the panel generates an email notification (Plesk panel updated successfully).
Other Plesk 12.0.18 servers that are set to automatically update aren't generating this email notification or displaying the "green" notification upon login to the Plesk Panel. Is there a flag, tmp file, or a DB trigger that isn't being set properly to cause this?
is it safe to Upgrade Parallels 11.5 to 12 from the panel
OS
CentOS 5.10 (Final)
Panel version11.5.30 Update #48, last updated at Nov 21, 2014 02:33 PM
after the login page, a blank page appears and I can't access to the Plesk Control Panel :
in the file : /var/log/sw-cp-server/error_log
2014/07/09 14:45:04 [error] 7422#0: *3551 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 91.204.25.4, server: , request: "GET /admin/ HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "91.204.25.4:8443", referrer: "https://91.204.25.4:8443/"
I just want to remove plesk and installed again. i saw (URL...) this page. use this code but plesk not removed. my sites are gone.how can i get back my site? what i should install.When i try install plesk 12 says you already install version 11.0.9
View 7 Replies View RelatedI have a server which I am using for multiple clients. Some with SSL enabled, some without. I have added custom ngingx conf files for nginxDomainVirtualHost.php and nginxWebmailPartial.php in /usr/local/psa/admin/conf/templates/custom and modified the following lines to try and harden security:
Code:
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
ssl_ciphers "EECDH+ECDSA+AESGCM EECDH+aRSA+AESGCM EECDH+ECDSA+SHA384 EECDH+ECDSA+SHA256 EECDH+aRSA+SHA384 EECDH+aRSA+SHA256 EECDH+aRSA+RC4 EECDH EDH+aRSA RC4 !aNULL !eNULL !LOW !3DES !MD5 !EXP !PSK !SRP !DSS";
ssl_prefer_server_ciphers on;
After reconfiguring using
Code:
/usr/local/psa/admin/bin/httpdmng --reconfigure-all
I check in /etc/nginx/plesk.conf.d/vhosts/<domain>.conf and the changes are shown correctly there but browsers and online tools such as [URL] .... still say that the sites are using 128 bit encryption and TLS 1.0.
The Plesk admin panel itself displays 256 bit encryption and TLS 1.2.
I had forwaded a domain
say mydomain.com
to yourdomain.com
Which works fine and no issues
Now I wish to remove the forwarders and make the website active and visible
I am attaching the snap shots to show what I tried
After a fresh install on a Debian Wheezy system, I get the following error(s) when trying to access the control panel.
https://sub.example.com:8443/
404 Not Found
Nginx
My log
Code:
2014/06/09 19:04:15 [warn] 32236#0: conflicting server name "" on 0.0.0.0:8443, ignored
2014/06/09 19:04:26 [error] 22597#0: *43 "/usr/share/html/index.html" is not found (2: No such file or directory), client: 68.51.77.126, server: , request: "GET / HTTP/1.1", host: "sub.example.com:8443"
While http://sub.example.com:8880/ works fine
I have 12 domains in my control panel but i only see 5 domains in my control panel but all 12 domains are working they are up but only see 5 in control panel....
View 7 Replies View RelatedI am using Plesk 12 on Centos 6.
The Add and Remove Product Components panel lists various options to install.
There are options to add PHP 5.6, PHP 5.5, PHP 5.4, PHP 5.3 and 5.2 support. None of these are installed.
At the same time under a heading Web hosting features there is a PHP5 support that is installed.
What is the difference between these two references for same PHP5?
Does the panel allow installing PHP5 from two places?
I've installed PHP-FPM into Plesk 12 and it is showing as a running service. However I can't find any way of enabling it per site at all. I'm still just getting the 3 standard PHP options:
Apache module
CGI application
FastCGI application
The documentation states the option would be available on a per-site basis but it isn't.
How do they redirect to the Server URL in CPanel.
Eg. <Domain.tld>/cpanel
I looked for directory called /cpanel but non-exist.
I wish to use the same method to redirect to Plesk Panel <Domain.tld>/ppp if possible.
I created a new SSL certificate and made that the default for the Panel in the SSL Certificates section. That works fine.
But my webmail URLs are still using the old certificate. E.g. https://webmail.mydomain.com
How do I update to the new certificate for webmail?
EDIT: creating a certificate for mydomain.com and using it in the Hosting Settings section did not work.
I've been having a few issues with the control panel navigation is running slow even though I have heaps of resources available and free. The server is located locally and have no problems surfing websites attached to the same server.
When I login as admin, it can take 25 seconds to load into the first screen.
CPU GenuineIntel, Intel(R) Xeon(R)CPU E5649 @ 2.53GHz
Version Parallels Plesk v12.0.18_build1200140606.15 os_CentOS 6
OS CentOS 6.6 (Final)
Memory Available 6GB used 2.5-3GB
HDD: 300GB/ approx 130GB Free
I have tried issuing a /etc/init.d/psa restart command and has made no difference.
Why can i login with two different passwords for the user admin in plesk control panel?
View 1 Replies View RelatedI have Parallels Plesk Panel v.11.5.30 on CentOS (Linux version 2.6.32-431.3.1.el6.x86_64) and I get error message whenever Plesk tries autoupdates.
Problem started to appear just after I updated server with atomicorpURL....When I try to update manually through console (yum update) I get following error:
Code:
warning: rpmts_HdrFromFdno: Header V3 RSA/SHA1 Signature, key ID 4520afa9: NOKEY
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY.art.txt
The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository.When I try to update any component manually through panel I get following error (This is for Apache web server support):
Code:
Installation started in background
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile
* atomic: www7.atomicorp.com
* base: mirror.checkdomain.de
* extras: mirror.checkdomain.de
* updates: mirror.checkdomain.de
[code]....
Fatal error during packages installation: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository.YumBaseError: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository. Error: Failed to run the Yum utility.The Yum utility failed to install the required packages.Attention! Your software might be inoperable.
Is it possible to disable to root login to the panel? I do not mean the SSH login.
View 4 Replies View Related
