Plesk 11.x / Linux :: Setting Up SSL On CentOS With SNI
Jan 31, 2015
I've searched the web to set up ssl on 1 domain of 2 installed op 1 ip address. It seems easy: setup virtual hosts, turn ssl on and point to your certificates.
I'm completely lost. I setup the certificate from geotrust in plesk panel 11.5 as described in the manual but that didn't work, apparently because i have 2 domains and 1 ip.
So i started looking to adapt my vhost settings to use sni. First problem: i can't find the setting of the virtual host.
Secondly where can i find the path to the .key and .crt files.
How i can install a ssl certificate on one of the two domains sharing 1 ip.
View 13 Replies
ADVERTISEMENT
Jun 20, 2014
I am trying to install Magento on my apache server. I am running into the dreaded mcrypt issue as Magento needs it to run. I have now been googling for the past few hours and have gotten nowhere.
Here are my details:
Linux
Centos 5.5
PHP 5.3.3
x86_64
Plesk 12
I have tried installing all sorts of different repos and it just isn't working.
When I try to install using # yum install php-mcrypt I get the following:
Loaded plugins: fastestmirror
Package php-mysql is obsoleted by php-mysqlnd, trying to install php-mysqlnd-5.5.13-3.el5.remi.x86_64 instead
--> Processing Dependency: php53-gd for package: psa-php53-configurator
--> Processing Dependency: php53-imap for package: psa-php53-configurator
[Code].....
View 6 Replies
View Related
Oct 15, 2013
If a create a subscription on a plesk Server through the API don't know how to specify the preferred domain and it's always set to domain.tld. I would like to set it to none for all.
My xml request:
Code:
<packet version="1.6.3.0">
<webspace>
<add>
[Code].....
View 2 Replies
View Related
Nov 26, 2014
I changed the DNS parameters of the default domain service plans to slave.
But where can I set the default master server, I didn't find it.
View 4 Replies
View Related
Jun 30, 2013
I have two VPS with two different Datacenters. I am running my website on one of the VPS which has Plesk Panel 11.5 installed on it. Since my second server is not in use, I would like to use it as a Secondary DNS Server for redundancy. I know this can be done with Plesk Expand. But, I am not in a position to invest further as I just run 4 domains on my main server. I was looking at installing some free control panel on my secondary VPS and set it up as a Secondary DNS Server if possible. But, I could not find any Guides on setting this up.
How I can do this? I see that we have an option in Plesk - 'Switch DNS Service mode' which can be used to either setup my first server as a Secondary or Primary. I have installed Webmin/Virtualmin on the second server, but how to set this up perfectly. I can reinstall the 2nd Server if required, but not my first one with Plesk.
View 4 Replies
View Related
Jan 22, 2015
I have a client with a download file on 146 MB.Download speed is pretty slow and timeout out around 70MB..
View 2 Replies
View Related
Jul 14, 2014
In Fail2ban (great idea to include it in plesk!) settings you can set "Time interval for detection of subsequent attacks" (findtime) in general. But it would be interesting this setting per Jail.
You could have 2 jail with same filter but different findtime. Example:
Jail 1) 5 failures in 600 seconds: 1800 seconds ban
Jail 2) 30 failures in 86400 seconds: 604800 seconds ban
There are bots that detect if you have some protection fail2ban or similar and it will adapt, login attempt every 300 seconds for example. Jail 1 no detect this attack, but Jail 2 yes.
See the example, live time :
[root@--------- log]# cat /var/log/maillog | grep 'warning: ---------'
Jul 14 07:10:54 --------- postfix/smtpd[5482]: warning: ---------[--.--.--.---]: SASL LOGIN authentication failed: authentication failure
Jul 14 07:54:16 --------- postfix/smtpd[4782]: warning: ---------[--.--.--.---]: SASL LOGIN authentication failed: authentication failure
[Code] .....
View 2 Replies
View Related
Feb 8, 2015
How to upgrade PHP to PHP 5.4 on CentOS 6 ?
View 4 Replies
View Related
May 14, 2015
I have a server that I use to host my primary domain, and I have a cople Plesk servers, now I updated the hostnames of all the servers like
Code: s1.de.myserverplace.de
Now when the plesk server sends a mail it goes in spam always,
In the SPF records of the primary domain sits this
Code:
myserverplace.de. IN TXT "v=spf1 a mx a:myserverplace.de a:s1.de.myserverplace.de ip4:148.251.100.157 ip4:144.76.163.46 ip6:2a01:4f8:201:81b8::60 ?all"
But when I actually send the mail in the headers of the received mail I get this.
Code:
Received: from s1.de.myserverplace.de (s1.de.myserverplace.de. [144.76.163.46])
by mx.google.com with ESMTPS id p2si2158952wjy.73.2015.05.14.04.09.17
for <mymailtestacount@gmail.com>
(version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128);
[Code] ....
How would I set this up so this doesn't happen?
View 3 Replies
View Related
Apr 20, 2014
Can't get it working, I want to set up a cron job for a domain user, but seems that there's a problem to find the php executable. The command is:
Code:
/usr/bin/php/ -f /var/www/vhosts/thedomain.com/httpdocs/test.php
But the report says
-: /usr/bin/php/: No such file or directoryClick to expand...
View 3 Replies
View Related
Jul 8, 2015
I'm trying to setting plesk backups to own ftp server.. My ftp server is listening by the port 31..
My conf:
Server: mydomain:31
Directory: vpsbkp
User and password...
Passive mode checked
Here the error display: "Transport error: unable to list directory: Curl error: Couldn't connect to server"
Where are the bkp ftp logs?
View 4 Replies
View Related
May 6, 2014
I've got a situation in which I need to have a set of mail accounts that share a domain name with a domain that's already in use as a domain alias and because the domain is already in use, I'm unable to create a new account using that domain. I tried explicitly adding "www" to the domain alias so I could keep the www.domain.com address as an alias and reserve the "domain.com" name for use as a separate account, but Plesk won't allow for that.
How to address this? The idea I'm currently considering is to delete the domain alias and then create the new account and manually set the DOCUMENT ROOT of the new account to refer to the other domain's document root. I'm sure this could create some difficulty in Plesk so I'm looking for input before trying it. I'm actually not even sure exactly where I would be able to redefine the document root with Plesk allowing the change and not overwriting it later.
If all else fails, I can setup a new account on a different and unrelated Plesk server, but I'd prefer not to do that.
View 2 Replies
View Related
Aug 22, 2014
We purchased license for MagicSpam and now couldn't find anywhere installation for Centos 7...How to install?
View 2 Replies
View Related
Jan 29, 2015
I am attempting to migrate from a debian os server with the latest plesk 12 to Centos (rather cloudlinux) and would like to know if there are any options that should not be checked during the process?
I recently tried to do the normal procedure, which is to transfer all objects, etc. And for some reason the percentage went from 1-50% to then back to zero.. but when clicking to check the current status, its still working
Status: in progress
Current operation deploying domain.com
current operation progress: empty bar
Different sites are transferring, but I am not sure if the migration will effect the system because the difference in OS folder structure and file location.
View 6 Replies
View Related
Dec 10, 2014
Can i install imagemagick on centos 6.5 with this commands?
ImageMagick:
[root@server ~]# yum install ImageMagick
[root@server ~]# yum install ImageMagick-devel
PHP-imagick:
[root@server ~]# yum install gcc (Please note: if it is already installed, then it will be updated if required)
[root@server ~]# yum install make automake
[root@server ~]# yum install php-pear
[root@server ~]# yum install php-devel
[root@server ~]# pecl install imagick
Now you will have to add the imagick extension in your PHP condifuration file:[root@server ~]# cd /etc/php.d/[root@server ~]# nano -w imagick.ini
Then you put following line in that file:extension = “imagick.so”..And save it with <CTRL> <O>After finishing this, you will have to restart Apache as follows: [root@server ~]# service httpd restart
View 4 Replies
View Related
Jan 2, 2015
I have the latest centos 7 and plesk 12 installed on a dedicated server and i wish to add a new IP to use on a specific website. However, when I am trying to add the IP in plesk i am getting the following error:
Code:
Error: ifmng failed: sh: /sbin/ifconfig: No such file or directory /sbin/ifconfig 'eth0:1' '85.214.93.196' netmask '255.255.255.255' up exited with non-zero status 127
I have read somewhere on the forum that installing iptables can fix this but cents 7 is using the new firewald and i am wondering if in the future such a change will not affect the well being of the overall server.
Is there any solution to this problem or will there be a fix from Plesk in the near future ?
View 6 Replies
View Related
Oct 11, 2014
I am trying to install a magento on Plesk Version 12.0.18 Update #19 / CentOS Linux 7.0.1406 (Core).
Plesk is reporting that it cant install magento because php-mcrypt is missing. So I tried the following:
Code:
1) rpm -ivh [URL] ....
2) yum update
3) yum install php-mcrypt
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: ftp.plusline.de
* epel: mirror.23media.de
* extras: ftp.plusline.de
* updates: mirror.netcologne.de
[Code] ......
What can i do to install mcrypt without breaking other dependencies ?
View 5 Replies
View Related
Sep 9, 2014
Why isnt Plesk 12 configuring firewalld under CentOS 7 correctly? We have to manuella enable port 8443 and all other ports manually with firewall-cmd..
View 1 Replies
View Related
Sep 15, 2014
We noticed that for now only Plesk 12 supports RHEL / CentOS 7. Is support for EL 7 planned for Plesk 11.5?
View 13 Replies
View Related
Dec 5, 2014
I have new Linux server with CentOS 6.6 on it. I have tried to install Plesk version 12.0.18 on it.
During installation process from http://autoinstall.plesk.com/plesk-installer shell script I'm getting error:
START Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:09:44 CST 2014
***** problem report *****
ERROR while trying to SMB database not created
Check the error reason(see log file: /var/log/plesk/install/plesk_12.0.18_installation.log), fix and try again
STOP Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:10:01 CST 2014: PROBLEMS FOUND
START Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:15:46 CST 2014
When I have tried to run command:
# /usr/local/psa/bootstrapper/pp12.0.18-bootstrapper/bootstrapper.sh repair
I'm getting errors:
---TRANSACTION 0 0, not started, process no 32603, OS thread id 139715979196160
MySQL thread id 38, query id 7054 localhost admin
SHOW ENGINE innodb status
--------
FILE I/O
--------
I/O thread 0 state: waiting for i/o request (insert buffer thread)
[Code] ....
View 10 Replies
View Related
Jul 4, 2014
how to protect Linux Server from Ddos Attack (Botnet, Loic)
View 2 Replies
View Related
Oct 27, 2014
I am trying to install Plesk 12.0 on fresh CentOS 6 (64bit). It goes as far as initialising the databases and then moans about missing files:/usr/bin/sw-engine: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
I then install libpng
$ yum install libpng.x86_64
Re-run installer and hits next error - libfreetype:
/usr/bin/sw-engine: error while loading shared libraries: libfreetype.so.6: cannot open shared object file: No such file or directoryI have CentOS-base repo and Epel repo enabled.
Why are those files not being installed as dependencies by Plesk? Is this a bug ?
View 2 Replies
View Related
Apr 19, 2009
2 days ago, I tried to find some guides over WHT for setting up FFMPEG on centos 5 server.
But the thread seems to be providing on older version of FFMPEG setup guide which made me a little confused on the whole process of get it setting up the right way.
Can anyone who have done FFMPEG installation with success on centos 5 to show me the steps to it?
View 5 Replies
View Related
Sep 5, 2014
I'm running a CentOS 6 server with Plesk 11.0.9 installed. It's only being used for dev purposes with only a couple vhosts running on it. All of the vhosts are using PHP - there are a few WordPress sites and Zend Framework 2 applications running. Up until a few months ago it was also running a high traffic WordPress site, but that's no longer the case.
This server has been running without problems for over a year. A few days ago I first started noticing 503 errors (Service Temporarily Unavailable) on accessing one of the vhosts from the web browser.
I logged on through ssh and noticed the load was a bit higher than I expected (nothing crazy though). All other vhosts using PHP also gave me the same error. The only vhost that was working normal was a Ruby on Rails app (Redmine).
I also did a netstat -napt and noticed many connections from two or three IP addresses. I checked their geographical location and after blocking them through iptables the problem seemed to have gone away.
Now it's a few days later and the same problem started popping up. I checked again through netstat and noticed that again a whole bunch of connections from only a handful of IP addresses were connected to Apache.
When I was digging deeper I noticed that some of those IP addresses were what looks to me like other servers (at least they're running Apache). I'm suspecting they are hacked servers and they're trying to use my server to send spam or some other type of evil.
I just blocked those new IP addresses in iptables and that seemed to have solved the problem for now again, but I want to solve the root of the problem.
So my questions are:
1) How can I find out to what vhost those clients are connected?
2) Why does Apache stop working with not that many client connections, when it used to serve thousands of visitors at the same time when that big site was still running on this server?
3) What could they possibly be using my server for? The first time it happened I thought that they found some leaking WordPress plugin to use to spam people, but today I checked and there's barely anything in the mail queue.
View 1 Replies
View Related
Sep 3, 2014
couldn't find any installation guide by Paralles how to install Plesk12 step by step. Found some on the internet, got the webinstaller started, but it says I should visit "192.168.0.100:8447" in my browser, which is just the internal IP of the server. Now I don't know what to do now, it's a fresh installed CentOS 6.5
View 6 Replies
View Related
Apr 25, 2015
I am running CentOS 5.5, Plesk 12.
Access_log and error_log are being rotated around 10AM daily for my server.
But for busy days access_log and error_log gets very big to inspect. Is there any way that I can manually reset the logs for the time being but without changing the daily rotation time?
View 1 Replies
View Related
Sep 26, 2014
I'm just testing Plesk 12 on CentOs 7 and after installation is succesfully completed, I cant access [URL]
This is the environment and steps which I taken:
* Fresh CentOs 7 iso
* Windows 2008 R2 Hyper-v hypervisor
1) Installation of the CentOs successfully completed
2) Yum update
3) Download auto-installer
4) Run auto-installer
5) process successfully completed
6) NOW I CAN'T access the url ...
View 18 Replies
View Related
Jan 19, 2015
I would like to ask if its possible ( supported ) to run Parallers Plesk 12 Panel on centos 7 ( openlogic) in Microsoft Azure infrastructure.
View 3 Replies
View Related
Apr 1, 2015
I want to update CentOS from:
Code:
Version Parallels Plesk v12.0.18_build1200140606.15 os_CentOS 6
OS CentOS 6.6 (Final)
to CentOS 7.
What steps I need to do to install CentOS 7?
View 4 Replies
View Related
Jan 1, 2008
I've purchased a VPS with CentOS 5 on and am looking to get it all up and running myself (Never done anything Linux based before but don't mind learning). I've gotten as far as installing LAMP + Webmin on the server, outsourced my DNS to zoneedit and email to Google and am now trying to configure other parts. I'm currently stuck on two things.
1. I'm trying to configure my FTP server. I've installed and am able to run it and connect to it myself as root but I can't figure out how to get it my html folder. Its only got files like .bash_history and .bash_logout in view. Also trying to do this through Webmin cause I've got no idea where to find anything on the command line other then proftd.conf
2. I'm trying to add users to the server but again I'm unsure on how to set the permissions for it. I can create it but it comes up with the error /dev/null Permission Denied a couple of times when I log in.
View 3 Replies
View Related
May 20, 2009
I have supybot, and I want to make it startup at bootup, in the background. The command is
supybot some.conf
Anytime I reboot I want it to do that, but as a background process,
View 4 Replies
View Related
