i am having a problem getting a dedicated server running for Unreal Tournament GOTY. everytime i create a dedicated server i get this error in the console:
Log: AInternetLink Resolve failed: Can't find host master.mplayer.com (WSANO_DATA)
ScriptLog: UdpServerUplink: Failed to resolve master server address, aborting.
im running through a router.
I have a fresh server running CentOS 6 (final). I am trying to install Plesk 11.5.30 but i am experiencing some problems. When i run the plesk-installer i get this message:
Your host name must resolve to the correct IP address of your server, unless you are using network address translation (NAT).
Please quit Parallels Installer, fix the host name resolution problem, and then try installing again.
You can skip the hostname check and continue the installation, however, in such a case, the installer cannot guarantee successful installation.
Now, in my /etc/hosts file i have this:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
Is this correct? Or do i need to add/change something else?
My server is in the clound.
Is it possible to have a master 404 page that is applied to all the people on our hosting?
View 0 Replies View Relatedi got this error :
rndc: connect failed: 127.0.0.1#953: connection refused
oot@server [/]# rndc status
rndc: connect failed: 127.0.0.1#953: connection refused
root@server [/]# /etc/init.d/named status
rndc: connect failed: 127.0.0.1#953: connection refused
named is stopped
root@server [/]# /scripts/fixndc
Named could not be restarted, any obvious config errors should show up below this line.
No critical problems found, will attempt to regenerate keys regardless.
warn [fixrndc] /usr/sbin/rndc status failed: rndc: connect failed: 127.0.0.1#953: connection refused
Creating rndc.conf
Creating /etc/rndc.key
warn [fixrndc] /usr/sbin/rndc status failed: rndc: connect failed: 127.0.0.1#953: connection refused
Restarting named
warn [fixrndc] /usr/sbin/rndc status failed: rndc: connect failed: 127.0.0.1#953: connection refused
/scripts/fixrndc failed to fix the rndc key (or named is otherwise broken), please investigate manually
and i have try to reload the rndc but i got this error :
root@server [~]# rndc reload
rndc: connect failed: 127.0.0.1#953: connection refused
my vps info : linux os - centos , using cpanel , apache , mysql ....
root@server [~]# uname -r
2.6.18-028stab064.7
root@myserver [/etc/apf]# apf -r
Opening /proc/modules: No such file or directory
Unable to load iptables module (ip_tables), aborting.
Virtouzzo does not start a VPS with error "Unable to add IP x.x.x.138 to pool: address already in use"
The IP is not is use so what is wrong?
We have been dedicated server. In that the following error has been creating Its making severe issue Please help me to resolve this issue.
#grep 'exit signal Bus' error_log
[Wed Jul 16 21:18:45 2008] [notice] child pid 19433 exit signal Bus error (7)
[Wed Jul 16 22:12:56 2008] [notice] child pid 22194 exit signal Bus error (7)
[Wed Jul 16 23:08:53 2008] [notice] child pid 31096 exit signal Bus error (7)
[Wed Jul 16 23:30:29 2008] [notice] child pid 1139 exit signal Bus error (7)
[Thu Jul 17 00:09:58 2008] [notice] child pid 3336 exit signal Bus error (7)
[Thu Jul 17 00:28:03 2008] [notice] child pid 6256 exit signal Bus error (7)
[Thu Jul 17 00:53:55 2008] [notice] child pid 7459 exit signal Bus error (7)
Memory and Hardware test passed (DC people checked). Reload RHEL4 OS with 64 bit.
Server Details:
CPU : Intel(R) Xeon(R) CPU X3210 @ 2.13GHz (4 CPU)
CPU MHz: 2133.413
RAM : 4 GB
Apache : 2.0 (Previously tested with 2.2.9)
PHP : 5.2.5
MySQL : 5.0.1 (Running separate box)
Current Apache Settings:
KeepAlive On
MaxKeepAliveRequests 0
KeepAliveTimeout 5
UseCanonicalName Off
<IfModule prefork.c>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
ServerLimit 2000
MaxClients 2000
MaxRequestsPerChild 0
</IfModule>
Previous Apache Settings:
(Tried with below apache settings on that time also the signal bus error created )
Apache 2.2.9 with eAccelerator compailed.
KeepAlive Off
MaxKeepAliveRequests 50
KeepAliveTimeout 10
UseCanonicalName Off
<IfModule prefork.c>
StartServers 16
MinSpareServers 8
MaxSpareServers 64
ServerLimit 500
MaxClients 500
MaxRequestsPerChild 10000
</IfModule>
Compiled in modules:
core.c
mod_access.c
mod_auth.c
mod_include.c
mod_log_config.c
mod_logio.c
mod_env.c
mod_expires.c
mod_headers.c
mod_unique_id.c
mod_setenvif.c
mod_proxy.c
proxy_connect.c
proxy_ftp.c
proxy_http.c
mod_ssl.c
prefork.c
http_core.c
mod_mime.c
mod_status.c
mod_autoindex.c
mod_asis.c
mod_info.c
mod_suexec.c
mod_cgi.c
mod_negotiation.c
mod_dir.c
mod_imap.c
mod_actions.c
mod_userdir.c
mod_alias.c
mod_rewrite.c
mod_so.c
Apache Server compiled with....
-D APACHE_MPM_DIR="server/mpm/prefork"
-D APR_HAS_SENDFILE
-D APR_HAS_MMAP
-D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
-D APR_USE_SYSVSEM_SERIALIZE
-D APR_USE_PTHREAD_SERIALIZE
-D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
-D APR_HAS_OTHER_CHILD
-D AP_HAVE_RELIABLE_PIPED_LOGS
-D HTTPD_ROOT="/usr/local/apache"
-D SUEXEC_BIN="/usr/local/apache/bin/suexec"
-D DEFAULT_PIDLOG="logs/httpd.pid"
-D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
-D DEFAULT_LOCKFILE="logs/accept.lock"
-D DEFAULT_ERRORLOG="logs/error_log"
-D AP_TYPES_CONFIG_FILE="conf/mime.types"
-D SERVER_CONFIG_FILE="conf/httpd.conf"
Running single website with drupal based flash arcade website. Per day 2500 visitors and 150 users online normally.
I am almost 3 weeks to resolve this issue.
I got an error in ftp.
Command:MLSD
Response:150 Accepted data connection
Response:226-ASCII
Response:226-Options: -a -l
Response:226 24 matches total
Error:Connection timed out
Error:Failed to retrieve directory listing
My VPS was a clean build 2 weeks ago and so far i have installed cpanel and configured everything and added accounts. I began that one of my scripts that uses gethostbyaddr($ip) was failing to resolve any of the ip's it received. I made another PHP file to test this, with this code:
PHP Code:
<?phpecho file_get_contents[url];?>
Resulting in:
Warning: file_get_contents() [function.file-get-contents]: php_network_getaddresses: getaddrinfo failed: Name or service not known
The thing is, the VPS is resolving domains just fine
I can ping, send emails, even dig:
Code:
[root@server etc]# dig google.com
; <<>> DiG 9.2.4 <<>> google.com
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 34548
;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 4, ADDITIONAL: 4
;; QUESTION SECTION:
;google.com. IN A
;; ANSWER SECTION:
google.com. 300 IN A 64.233.167.99
google.com. 300 IN A 64.233.187.99
google.com. 300 IN A 72.14.207.99
;; AUTHORITY SECTION:
google.com. 343652 IN NS ns2.google.com.
google.com. 343652 IN NS ns3.google.com.
google.com. 343652 IN NS ns4.google.com.
google.com. 343652 IN NS ns1.google.com.
;; ADDITIONAL SECTION:
ns1.google.com. 343143 IN A 216.239.32.10
ns2.google.com. 343143 IN A 216.239.34.10
ns3.google.com. 343143 IN A 216.239.36.10
ns4.google.com. 343143 IN A 216.239.38.10
;; Query time: 62 msec
;; SERVER: 83.149.80.123#53(83.149.80.123)
;; WHEN: Tue Jul 24 04:49:35 2007
;; MSG SIZE rcvd: 212
I have no clue what's up, and i think there must be a guru here that has an idea of what is going on?
i use centos based server. yesterday everything was OK. but now, when i connect via SSH, my server can't resolve hosts. wget, ping, or curl don't work. also i use VNC to remote desktop. when try to open a page via firefox, it says server not found.
View 1 Replies View RelatedI want to know more about dns servers (master2slave), is there any tutorials how can I do that? I have 10 servers now, do I need to buy 2 more only for DNS?
View 6 Replies View Relatedmy server seems to have lost its ability to do name lookups:
Quote:
[root@cp ~]# wget =>`ossec-hids-2.0.tar.gz'
Resolving failed: Temporary failure in name resolution.
it hangs on the "Resolving bit for a long time.
my resolv.conf file is as follows:
Quote:
nameserver 66.90.68.16
nameserver 66.90.68.26
which are the 2 nameservers of my datacenter.
I tried doing a /scripts/upcp --force and I get this:
Quote:
[root@cp ~]# /scripts/upcp --force
Updating /scripts...
Sync Source:
and it just hangs there
the sites I am hosting use PHP script that make a lot of outbound web connections so this is crippling my server
5 hours back I got fails of services mails and then I restart VPS but after few minuts services status up but sites not working.
I contact with support and they told me "Service Named is down on your server".
Any how they update Cpanel, during updation I got email that with subject
Quote:
[ipcheck] Problems with dns setup on server.servername.com
The hostname (server.servername.com) resolves to . It should resolve to xx.xx.xxx.xxx.
Support added entries for me, but sites still not up. They again updating CPANEL. Seems they unable to solve problem.
when I run DNS report for some of domain of my it give few errors on
1)
SOA MNAME Check Your SOA (Start of Authority) record states that your
master(primary) server is: Fail
2)
Invalid characters Checks if MX records use valid host names, without any invalid characters. FAIL
how to fix this using WHM.
I changed the DNS parameters of the default domain service plans to slave.
But where can I set the default master server, I didn't find it.
I got a new server from uk2, has whm but i just couldnt get the server to work, i changed hostname and made nameservers etc but couldnt get it to work i pointed ips to hostnames and everything no response, domain is www.uploadline.com ns1.uploadline.com and ns2.uploadline.com i havent used cpanel for 2 years now and i used to have alot of experience in it before these days i just stick to directadmin and other control panels.
I just need to ask a few questions and i need help too to get my server up and running as im losing alot of time and money here
i remembered when i changed hostname on whm i need to run this through ssh:
/usr/local/cpanel/cpkeyclt
So i did, and this was the result:
Quote:
login as: rootroot@server80004.uk2net.com's password:
Last login: Sat Nov 1 01:39:07 2008 from proxy-sov.uk2.net
root@server1 [~]# /usr/local/cpanel/cpkeyclt
Updating Internal cPanel Information........................................quer y failed: query timed out
[cpkeyclt.pl]: No working dig found!
Unable to establish connection. License server hostnames could not be resolve to IPs.
Done
.Done
root@server1 [~]#
I just bought a new ip address and want to setup this new ip as my server's main ip, making the 'existing main ip' as the secondary ip.
Which means, this new ip will be the server's default ip address for all services, including when connecting to other server.
I'm using CentOs 4.5 and swsoft's panels: HSPcomplete & Virtuozzo Power Panel, and Webmin.
I have just taken hosting from godaddy. i have taken dedicated website hosting. But my ftp are working in my office filezilla and not at home. Its giving 530 error, unknown ip address.
I am using file zilla in office and at home.
I have been able to find lots of information on 550 errors, but not so much on unrouteable addresses.
When I try to send email to clrockwell [;at'] truckingshow ['dot'] com it responds back with:
Code:
clrockwell [;at'] truckingshow ['dot'] com : host truckingshow.com[209.40.205.67] said: 550 Unrouteable address (in reply to RCPT TO command)
The email addresses were added through cpanel, ls -l shows them all there. We have moved servers and, as best I could, I compared everything and it seems to be the same but obviously I'm missing something.
Edit: Also, when I visit truckingshow.com/webmail I am prompted for username and password. I enter it in (email address above and password) and then it takes me to the normal cpanel webmail page giving me the option to choose horde, squirrel or roundcube. I select one, then the software itself (not the .htaccess) asks for my login again, then denies it. I have reset these passwords to the same exact thing over and over, so I know for sure the username and password are correct.
Edit 2: from network tools
Code:
Contacting truckingshow.com [209.40.205.67]...]
[Connected]
220-truckingshow.com ESMTP Exim 4.69 #1 Fri, 11 Jul 2008 10:39:10 -0700
220-We do not authorize the use of this system to transport unsolicited,
220 and/or bulk e-mail.
EHLO Network-Tools.com
250-truckingshow.com Hello Network-Tools.com [67.222.132.194]
250-SIZE 52428800
250-PIPELINING
250-AUTH PLAIN LOGIN
250-STARTTLS
250 HELP
VRFY clrockwell
252 Administrative prohibition
RSET
250 Reset OK
EXPN clrockwell
550 Administrative prohibition
RSET
250 Reset OK
MAIL FROM:<admin@Network-Tools.com>
250 OK
RCPT TO:<clrockwell@truckingshow.com>
550 Unrouteable address
[Address has been rejected]
RSET
250 Reset OK
QUIT
221 truckingshow.com closing connection
[Connection closed]
As of today, my managed server with 1and1 is givving me preoblems with FTP
Failed, error: 1007
Using WS_FTP Pro I'm not getting this error on any other server or VPS I have so confused as to what the problem may be.
The following error was encountered:
Unable to determine IP address from host name for mydomain.com
The dnsserver returned:
Server Failure: The name server was unable to process this query.
This means that:
The cache was not able to resolve the hostname presented in the URL.
Check if the address is correct.
Your cache administrator is admin.
what can I say to my provider
I have a RHEL4 Box and need to upgrade glibc. Currently have glibc-2.3.4-2.39 installed. I have downloaded glibc-2.7-2.i386.rpm and tried to install with
#rpm -Uv glibc-2.7-2.i386.rpm
but received the following error:
Code:
error: Failed dependencies:
glibc-common = 2.7-2 is needed by glibc-2.7-2.i386
glibc > 2.3.4 conflicts with glibc-common-2.3.4-2.39.i386
glibc = 2.3.4-2.39 is needed by (installed) glibc-headers-2.3.4-2.39.i386
glibc = 2.3.4-2.39 is needed by (installed) glibc-devel-2.3.4-2.39.i386
I've tried everything with this one. Here's the error on restart from Cpanel for BIND:
Attempting to restart named
Waiting for named to restart.... . . . . . . . . . . finished.
named status
named has failed, please contact the sysadmin (result was "named is not running"). Nov 22 19:31:54 webone named[18535]: starting BIND 9.3.4-P1 -u named Nov 22 19:31:54 webone named[18535]: found 4 CPUs, using 4 worker threads Nov 22 19:31:54 webone named[18535]: loading configuration from '/etc/named.conf' Nov 22 19:31:54 webone named[18535]: /etc/named.conf:1: open: /etc/rndc.key: permission denied Nov 22 19:31:54 webone named[18535]: loading configuration: permission denied Nov 22 19:31:54 webone named[18535]: exiting (due to fatal error)
I don't know what to do. I chowned /etc/rndc.key to named:root, and that worked for a few, and then it went back to doing this.