How Are My VPS Stats
May 16, 2007
Code:
root@srv01 [~]# free -m
total used free shared buffers cached
Mem: 10134 9598 535 0 249 7238
-/+ buffers/cache: 2109 8024
Swap: 4094 1 4093
root@srv01 [~]# Free
-bash: Free: command not found
root@srv01 [~]# free
total used free shared buffers cached
Mem: 10377476 9823916 553560 0 255984 7412716
-/+ buffers/cache: 2155216 8222260
Swap: 4192956 1032 4191924
View 5 Replies
ADVERTISEMENT
May 23, 2008
I look after a number of sites and monitor their stats. We use both webalizer and AWSTATS so we can have a comparison. Up until recently the stats for both of them where relatively the same, webalizer usually showing higher numbers as it doesn't filter bots but the progression of increase and decrease in stats was proportional. However, over the last few months a curious trend is appearing, the stats in AWSTATS are decreasing every month whereas the stats in Webalizer are increasing, the gap between them now is huge.
View 0 Replies
View Related
Feb 17, 2007
Below are some results from various stats programs from one day's activity on our site. webaliser and awstats give sort of similar results (although still 6400 pageloads difference), but these results differ so much from what google (analytics) says.
can anyone think of an explanation for this? does google have a different definition of a visit compared to webaliser and awstats? for these latter two is visits = hits?
Webaliser 4000 visits, 17600 page views. Aw stats says 3800 visits, 24000 page views. google says 637, 1500 page views. adsense says 3,600 page views.
View 0 Replies
View Related
Apr 4, 2006
does anybody know if there is a possibility to circumvent godaddy´s pathetic stats they offer on shared accounts?
-I am not quite sure what tells you the unique visitors (always a good one to know )
-It doesn´t tell you what robots crawl your site. It just says: robots 28 (great!)
-The graphs are all reversed. Meaning that the now date is always on the very left hand corner of the x-axis towards the 0 intersection. This is pretty pathetic as it goes against anything human brains are accustomed to.
I´ve got to stop venting now. I would appreciate if somebody knows where I can find the unique visitors (hosts served maybe?) and how I can install a better stats program on Linux shared hosting at go daddy.
View 3 Replies
View Related
May 28, 2008
I have a hosting pack with them, its not bad, didnt had any downtime yet, but...
Disk Space1.30 TB
In Use849.04 GB(63.56 %)
Free Space 486.75 GB
CPU Load: 38%
Memory Used: 3.78 Gb of 3.96 Gb
View 14 Replies
View Related
Jan 2, 2008
When I go through my AWStats under "Links from an external page (other web sites except search engines)" I see several domains that have linked to me. When I visit these sites they are generally porn and drug sites that do not contain a link. Some of the sites redirect you to other sites. When you look up these domain names they are all from Russia.
These sites account for mulitple hits as high as +14.5%. These sites do not represent the content on my sites.
My questions are.
How do I stop this? I have found banning IP addresses does nothing.
How are they doing this?
Can this lead to your site being blacklisted?
View 11 Replies
View Related
Jun 18, 2007
Anything good out there that you recommend that does not need a lot of set up?
View 7 Replies
View Related
Mar 31, 2007
I'm aware of AwStats for Win and SmarterStats, but I'd like to know of any other, if available?
View 11 Replies
View Related
Jul 11, 2007
root@server [/scripts]# ./runweblogs username
Log checker loaded ok..
==> WARNING: The configured processor count does not match the
==> actual processor count (4)! Running log analysis programs
==> on this system may cause excessive load! You should set "extracpus"
==> to "0" in /var/cpanel/cpanel.config if this is not ok.
==> cPanel Log Daemon version 22.2
==> Shared RRDTOOL support enabled
==> Starting cpbandwd (bandwidth monitoring for IMAP/POP)
cpbandwd is already running.
Processing eldred...
Run Logs domain: domain.com BW Limit: 262144000000 Domains: [save.domain.com save.info store.domain.com]
Stats are not updating for this account. I ran this twice, keeps getting stuck at this line forever..
Run Logs domain: domain.com BW Limit: 262144000000 Domains: [save.domain.com save.info store.domain.com]
View 11 Replies
View Related
May 12, 2009
Recently started using HAProxy for load balancing / failover, and have the usage down. But, no matter how much I search I can't find one simple thing...
Anyone know of a way to customize the status page?
Seems to be a directive actually in the binary...I can't find a conf, include, anything to pass any customization to it. I'm talking about the /haproxy?stats URI.
View 0 Replies
View Related
Feb 19, 2008
I've a few similar video sites and haven't noticed much difference over the years with their stats. They usually average anywhere from 50-100mb downloaded per day.
Suddenly this month, one site is practically going off the scale...600-700mb...up to 1gb downloaded per day...I'm like...wtf?! The other site is reporting normal BW.
I'm using awstats with hotlink protection enabled.
Is something or someone draining my bandwidth?
View 3 Replies
View Related
Apr 21, 2008
I have always had a US based shared hosting service for my sites, but I'm about to move to a VPS and am not sure where to shop.
My unique visitor stats per continent, for my main site, for the last month, are:
Europe 24,889
Americas 16,002
Asia 1,446
Oceania 609
Africa 208
Is a Europe based VPS a no-brainer with these stats? Does it really make a difference?
View 7 Replies
View Related
Jan 14, 2007
I thought i may as well post this here having already contacted my host. Just thought you knowledgable people may be able to give me some insight to this?
Well i am creating a sub-domain, and i obviously have site stats with AWStats for my primary domain name. If i was to create a sub-domain say example.sitename.com would i still receive the site stats for the sub as well as the primary one?
Anyone had any experience on this?
as midphase are good but generally take ages to get back to me and their response are rather general,
View 3 Replies
View Related
May 20, 2007
because of following logs server disbled my dir . But i can what they tyr to say to me ?
for example what do following numbers mean ?
Code:
root@eagle [~]# ps aux | grep vbulletin
vbulletin 2277 1.0 0.3 24872 14460 ? SN 02:34 0:00 /usr/bin/php index.php
vbulletin 19632 1.1 0.3 24872 14456 ? SN 02:34 0:00 /usr/bin/php index.php
vbulletin 1887 1.3 0.3 24872 14460 ? SN 02:34 0:00 /usr/bin/php index.php
vbulletin 28620 4.4 0.3 24796 14460 ? SN 02:35 0:00 /usr/bin/php index.php
vbulletin 3511 4.5 0.3 24796 14460 ? SN 02:35 0:00 /usr/bin/php index.php
vbulletin 30745 5.1 0.3 24796 14460 ? SN 02:35 0:00 /usr/bin/php index.php
vbulletin 13859 5.0 0.3 24796 14460 ? SN 02:35 0:00 /usr/bin/php index.php
vbulletin 6864 4.8 0.3 24608 14204 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 19513 4.7 0.3 24608 14176 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 29706 5.0 0.3 24608 14156 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 10099 4.8 0.3 24608 14196 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 7125 5.3 0.3 24608 14204 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 29849 3.8 0.3 24396 14028 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 3634 4.3 0.3 24396 13984 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 14476 4.8 0.3 24404 13972 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 19630 4.1 0.3 24180 13668 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 20126 3.5 0.3 23912 13500 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 20727 3.5 0.2 22664 12148 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 2332 5.0 0.2 22824 12304 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 19602 6.3 0.3 23772 13344 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 20436 5.3 0.3 23032 12552 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 12178 8.0 0.3 22964 12512 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 16656 10.0 0.2 21628 11180 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 16012 7.0 0.1 18612 7888 ? RN 02:35 0:00 /usr/bin/php index.php
root 4547 0.0 0.0 3736 660 pts/1 R+ 02:35 0:00 grep vbulletin
View 3 Replies
View Related
Jun 5, 2007
I have a pretty active phpBB forum. I was looking at my stats today and I notice some strange referrals. I checked it out and it and it is a bunch of spam sites. But with a link to one of my threads in the bottom (different per spam site).
- The spam sites have nothing related to my content
- The link to the threads in my forum has no relation to each other.
- Out of all the sites to put, why mine? My forum is not a very very popular forum.
I can post the link if it will better understand the above situation.
I just like to know why and what purpose does it serve? Also is it bad for me? As it is a spam site is linking to my forum. I dunno if search engines will think my site is a spam site as well.
View 2 Replies
View Related
Jan 30, 2007
My current "manager" it his all "great time" couldnt fix irt whole day so I am looking for experienced manager to check and fix my problem, let me know how much you charge per 1h and what's your experience,
View 2 Replies
View Related
Mar 21, 2007
I don't like having to come here for help, but I'm stumped on this one and my server tech isn't really helping - perhaps I'm overlooking the obvious. I have an addon domain on which stats are not updating. As of the 11th of this month, the site had over 1.2k uniques and right around that time we did a server move (on the 10th so it may have started then).
It is only for this one addon domain that things aren't working. It registers 0 new anything since then with the exception of yesterday when my tech says he repeatedly refreshed the page and it registered a grand total of 2 uniques. Back to 0 again so far today. I know the site is getting traffic.
Secondly, Webalizer shows very minor traffic in its categories with numbers that remain in the low single digits.
View 2 Replies
View Related
May 28, 2007
I recently installed Urchin on a cPanel server (RHES 4), all sites got its profile added into Urchin database, but when I run urchin for 1 site manually, it freezes on 0% and processing... Logs files have 0644 as explained in google Urchin manual ...
Also, using IP:9999, and viewing the profiles and its stats show 0 stats generated, but going to www.site.com/cpanel, then to Webstats - Urchin, shows every day with graphs, everything is ok...
Does anyone know how to disable cpanel urchin access, and only use the IP:9999 access to manage and view all statistics...
View 2 Replies
View Related
Oct 15, 2007
I have the following setup in cron for my MRTG stats:
0,10,20,30,40,50 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/bandwidth.cfg
0,11,21,31,41,51 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/cpu.cfg
0,12,22,32,42,52 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/cpu-temp.cfg
0,13,23,33,43,53 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/ping.cfg
0,15,25,35,45,55 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/memory.cfg
0,16,26,36,46,56 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/newconns.cfg
0,17,27,37,47,57 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/estabcons.cfg
0,18,28,38,48,58 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/ping2.cfg
But I'm not sure how much power it actually takes to generate theses MRTG stats... The server is a Celeron D 2.8Ghz, 512Mb ATA soft raid system. Do you think that I should update the stats less frequently to decrease the server usage?
View 3 Replies
View Related
Oct 15, 2007
I have the following setup in cron for my MRTG stats:
0,10,20,30,40,50 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/bandwidth.cfg
0,11,21,31,41,51 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/cpu.cfg
0,12,22,32,42,52 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/cpu-temp.cfg
0,13,23,33,43,53 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/ping.cfg
0,15,25,35,45,55 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/memory.cfg
0,16,26,36,46,56 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/newconns.cfg
0,17,27,37,47,57 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/estabcons.cfg
0,18,28,38,48,58 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/ping2.cfg
But I'm not sure how much power it actually takes to generate theses MRTG stats... The server is a Celeron D 2.8Ghz, 512Mb ATA soft raid system. Do you think that I should update the stats less frequently to decrease the server usage?
View 1 Replies
View Related
Feb 18, 2007
I have seen many people here showing the stats below:
Server Load 0.04 (4 cpus)
Memory Used 21.9 %
Swap 0.999 %
Disk vzfs (/) 6 %
and i have done lots of search on google and in this forum as well,
I have no idea how you can generate stats in this kind of format in SSH.
View 14 Replies
View Related
Feb 27, 2007
Should I trust my host with providing correct BW stats? Is there any way I can confirm those stats? (I don't have any tracking software or log analyzer installed because it uses too much resources.) The log file is tiny. Probably no more than 12-24 hours logged.
View 7 Replies
View Related
May 11, 2007
How can I arrange so stats are not loaded?
IMPORTANT: Do not ignore this email.
This is cPanel stats runner on server.dealsreferals.com!
While processing the log files for user stnudee, the cpu has been maxed out for more than a 6 hour period. The current load/uptime line on the server at the time of this email is
09:35:21 up 6 days, 22:32, 0 users, load average: 2.76, 19.13, 52.20
You should check the server to see why the load is so high and take steps to lower the load. If you want stats to continue to run even with a high load; Edit /var/cpanel/cpanel.config and change extracpus to a number larger then 0 (run /usr/local/cpanel/startup afterwards to pickup the changes).
View 7 Replies
View Related
Oct 27, 2007
It being the end of the month, I was reviewing the stats for my site, oldWithoutMoney.com, a place where I put my songs for folks to listen to.
The site typically receives minimal traffic, topping out at 100 unique visitors / 200MB each month, as expected.
But, I did note that there were an additional 126 'Error 404' (file not found) hits.
Might this be an indication of attack attempts? In any event, how might I better determine the nature of the URL requests generating the errors.
View 2 Replies
View Related
Jun 24, 2008
I can't seem to solve, perhaps you could give me some pointers or tips on how to fix this.
All the cPanel stats programs (Awstats etc..) haven't been updated since the 17th June but when I login to WHM it says the stats have been updated (within the past 24 hours).
On the 17th June I moved my hosting operations from the USA to the UK onto a new webserver.
How can I make sure these statistic programs are updated and shown from cPanel, even though I can tell it to update via SSH (completes) and claims in WHM with no problems (updated with in 24 hours), the new stats still fail to appear.
View 5 Replies
View Related
Jul 20, 2007
I have Awstats on my server enabled for:
Nokia Browser (PDA/Phone Browser)
UP.Browser (PDA/Phone Browser)
Motorola Browser (PDA/Phone Browser)
My question is, are the visitors a day accurate - which I take to be uniques. It seems these must be pretty far off.
Presently they show an extremely high multiple of that for pages/s (approx 30 -50 times the visitors). I've never heard of visitors clicking this many pages.
I've not come across these kind of number with other non-mobile sites and it makes wonder if its right.
A) is tracking handled in the same way on mobile devices as on desktops (cookies or sessions?) And is this reliable for mobile/handheld/cell-phone devices?
B) There really isn't much of a chance of these page views being a result of bookmarks - the page views don't seem to add up to this.
The 'Browser Top 10' hits coming from 'unknown' are > 50% of the total amount.
Are there any quirks with awstats or other tracking software when it comes to mobile devices, even though the activity is taking place on the server? I take it Urchin may be more accurate?
View 0 Replies
View Related
Aug 2, 2008
Not displaying CPU/Memory/MySQL Usage stats.Can u tell me how can i do it.
View 2 Replies
View Related
Oct 16, 2007
I am moving a site from one provider to another. My client wants to keep the existing webalizer stats after the transfer. Could anybody help with how to do the transfer and to make webalizer continue working on the new server?
View 5 Replies
View Related
Jan 15, 2007
I have a webserver that our main two company websites reside on and this box also hosts ~50 other misc. websites. None of the websites on the server are very CPU intensive and bandwidth usage on the box is next to none.
Every morning around 4-6am the server takes forever to load anything. Seeing as this is when I do most of my work, I quickly become frustrated when trying to load our admin area, webmail, etc. Note that things do load, just very slowly...
I've contacted my tech a couple of times but he says this is normal as it's backups and stats running. I guess my question is, IS this normal? If so, is there a way to lessen the load at all?
View 4 Replies
View Related
Jun 14, 2007
Many big web hosts provide details CPU usage stats for clients
For example, blue host provide cpu details like
[url]
View 2 Replies
View Related
