I am moving a site from one provider to another. My client wants to keep the existing webalizer stats after the transfer. Could anybody help with how to do the transfer and to make webalizer continue working on the new server?
View 5 RepliesI look after a number of sites and monitor their stats. We use both webalizer and AWSTATS so we can have a comparison. Up until recently the stats for both of them where relatively the same, webalizer usually showing higher numbers as it doesn't filter bots but the progression of increase and decrease in stats was proportional. However, over the last few months a curious trend is appearing, the stats in AWSTATS are decreasing every month whereas the stats in Webalizer are increasing, the gap between them now is huge.
View 0 Replies View RelatedI have a dedicated server with few hundred domains on it.
How can I automate to view all traffic stats for all of the domains in the server. Currently, I have to manually view the popular domains one by one to see the stats.
Ideally, I want to view daily visitors/per domain by a email report. Is this possible via backend script/cron job?
I don't like having to come here for help, but I'm stumped on this one and my server tech isn't really helping - perhaps I'm overlooking the obvious. I have an addon domain on which stats are not updating. As of the 11th of this month, the site had over 1.2k uniques and right around that time we did a server move (on the 10th so it may have started then).
It is only for this one addon domain that things aren't working. It registers 0 new anything since then with the exception of yesterday when my tech says he repeatedly refreshed the page and it registered a grand total of 2 uniques. Back to 0 again so far today. I know the site is getting traffic.
Secondly, Webalizer shows very minor traffic in its categories with numbers that remain in the low single digits.
I have a webserver that our main two company websites reside on and this box also hosts ~50 other misc. websites. None of the websites on the server are very CPU intensive and bandwidth usage on the box is next to none.
Every morning around 4-6am the server takes forever to load anything. Seeing as this is when I do most of my work, I quickly become frustrated when trying to load our admin area, webmail, etc. Note that things do load, just very slowly...
I've contacted my tech a couple of times but he says this is normal as it's backups and stats running. I guess my question is, IS this normal? If so, is there a way to lessen the load at all?
When i try to check my stats, i got this error : Not Found
The requested document was not found on this server.
URL : domaine.nld/plesk-stat/webstat/
I tried a lot of commands, to repair too..
# /usr/local/psa/admin/sbin/statistics --calculate-all
WARNING during statistics_collector execution: : Executing logs preparation...
But nothing... Always the same error.
Has anyone had any issues, or know of any issues with proccessing logfiles larger than 200MB under Webalizer? Seems to be a periodic issue. Cron says it processed, but stats did not update.
View 3 Replies View Relatedmy friend has about a 3 month period where webalizer has not been run and i was wondering if anyone knew how it could be run without reporting the gap and only processing the current month, the log files are still intact..
i know there are other options but i think he prefers webalizer.....
I have a few domains in a DA server whose stats stop working for a few months, any idea how to restart these few domains Webalizer? The rest of the domains' stats are working properly though
View 3 Replies View RelatedI'm running into some troubles moving my Webalizer installation. I want to keep all my stats, so what I did was to copy all the files to my new host, checked permissions as well.
Each website outputs their logs to a separate log file, and that log file is pointed to in the respective webalizer.conf.
My problem is that when I try to run webalizer -c /path to conf file/ it tells me that it found x new records (good!), but then it ignores all of them. Every single time it'll tell me it found so and so many records, and says, "(number of new records) ignored".
So I'm not sure what I've missed in the config, and why it can't update.
After migrating from the old ensim to the new "X", everything is working fine, except for the webalizer, I activated webalizer in one domain a few days ago.. and everyday Im trying to see the webalizer information, and it is always displaying this message:
Could not retrieve the requested site report because the Web server logs have not yet been generated. These are generated once a day. Please check again later.
I also tried forcing the log rotating for that site, but the problem still there.
Server is RHES 4 with EnsimPro X, log generation and webalizer is activated for the domain.
My IIS W3Log File is under C:Inetpubw3LogFilesW3SVC1
looks like this which is daily log file:
C:Inetpubw3LogFilesW3SVC1ex081022.log
C:Inetpubw3LogFilesW3SVC1ex081023.log
C:Inetpubw3LogFilesW3SVC1ex081024.log
All my web site is under c:InetpubVS
c:InetpubVSWebSite1.com
c:InetpubVSWebSite2.com
c:InetpubVSWebSite3.com
There is a webalizer directory under each domain folder.
Does anyone know how to setup a webalizer which can run weekly to process W3log files and put the result into corresponding domain webalizer folder?
While reviewing a Webalizer log of one of my clients' accounts, I found unknown users under "Top Usernames" table.
They kept appearing since 7 months ago, every month..
Names include persistent users:
setup
username
2661
other user names appear and go.
I am a hosting reseller and worried about being hacked.
I have recently migrated my websites from Plesk 11.0.9 to a new server with Plesk 12.x and the webalizer is not working.
- Is there a chance to repair it and not loose the data? If yes, how do I do that?
- Or do I have to remove it and install Webalizer again? How do I do that?
OS Ubuntu
Uninstalling Webalizer with plesk updater is not possible.
After executing this:
Code:
# /usr/local/psa/admin/bin/statistics --calculate-all
I get:
Code:
WARNING during statistics_collector execution: : Executing logs preparation...
error: error creating output file /var/www/vhosts/system/domain.tld/logs/error_log.1: File exists
statistics[6845]: Unable to execute logrotate via: /opt/psa/logrotate/sbin/logrotate /opt/psa/etc/logrotate.conf -s /opt/psa/var/logrotate.status
Currently i am using webalizer... How can i switch to aw stats by importing the current data...
View 1 Replies View RelatedIn reference to my previous post, i want to tranfer accross 7GB of data, approximatly 80,000 files i believe it is (due to a gallery script).
It's currently on another host (on a webhosting account) which uses their own control panel which has no options but to manage databases, the only way i can see to do this is via FTP but it'll take me days. I've tried using compressing and backup scripts, but the damn execution time on the hosts server is too low to allow the files to be zipped. Are there any ways? Can i login to my VPS via SSH and anyhow pull off the files from the other hosts server?
We had some issues with old server hence we migrated some websites to another new server from our old server.
We did a backup of all existing webfiles and database from old server and transferred the same to new server, a manual transfer few weeks ago.
However, we were not able to backup our awstats logs for this domains, can someone guide how to transfer awstats from old server to new server?
We cannot perform an automated transfer from old server to new server now, is there some way we can migrate our awstats from old server to new server for this domains?
I have a vps (CPANEL)... I would like to have incoming emails for a certain cpanel account transfer to another external server (after coming thru the VPS).
I store my emails on the external server and have more space there.
The reason behind this is:
I have spamassassin on my VPS and would like to run email thru that before it delivers on the external server. I do not have the capability to install spamassassin on the external server.
Is the above possible? How can I accomplish this?
I changed servers. It's been three days since we swapped DNS, and I have a slew of people that still can't access anything.
The thing is, the old server should have been set up to forward everyone to the new server, and it wasn't initially. This was done by the admin company by changing the "localhost" setting on the old config file for the mysql database to the new server's IP address.
So, I have people, a LOT of people, who have been unable to reach anything for the last three days. Neither old server nor new server. Nothing, zip, nada.
Yesterday, the admin company said that they had found something wrong with port 80, and had changed the settings, and we began to see some traffic, FINALLY. I though maybe we were fixed, but this morning, I still have a crapload of emails from people who can't reach anything.
This was a cPanel to cPanel swap, in the same datacenter, on the same vlan.
We're working on Day 4 here, and everyone seems to be guessing, and In get the sense that if I don't stay proactive, nothing will be resolved.
Thing is, I know just enough about this stuff to be dangerous, which is why I pay professional server admins.
I have read some in this forum and the sites I saw linked to others seemed ok but none I've seen really gave me options on more bandwidth.
I figured I would just post what I need and my budget and see if anyone could help me out or point me in the right direction and it be a site I havn't seen before.
I am currently with another dedicated provider that I will not name but I messed up something simple (I know what it is) while trying to add an ip to the box. I submitted a ticket Friday morning at 4am EST time explaing exactly what I need done, and how to do it just so they don't have to even research it. Needless to say the ticket was not even TOUCHED all day today (Friday) and now I am told it will not be looked at until Monday. This means I am without a server for the weekend unless I want to pay a good chunk for "emergency support". I personally find this absurd and think something simple should be a phone call away.
I typed all of this out to explain why I am looking for a new server.
I need a decent (but not hard core) processor, preferably not celeron or sempron.
Atleast 1 gig of ram and 100-200 gig or so HD. The biggest thing I need is transfer, I honestly do not care if its a 10 or 100Mbps port. I need atleast 3 to 4 TB (4000 GB) of transfer.
My price range is 100-150 USD a month.
I just signed up with a new host. How long should I expect it to transfer sites through WHM? I know it depends on the size of the sites but how long does the average 100M site?
View 6 Replies View RelatedI have to move 140 domains from my old cpanel dedicated server to the new one and have root access on both.
Earlier I wanted to avoid copying unnecessary files and was thinking of creating fresh domains/emails on new server and transfering content, but then realised that it will need more than 160 hours of manual labour (including informing clients that their passwords have changed).
Please advice as to which transfer method will be best based on the following constraints:
1. 70 domains will be done one week and remaining 70 next week while both servers continue to run.
2. On the new server all domains will have different nameservers.
METHOD 1. Putting same version of WHM-stable on both servers and using its "Copy an account from old server" feature. After copying the 70 accounts (one-by-one seems to cause less issues with large sites) we change nameservers for those 70 domains over the weekend.
METHOD 2: For every account on old server use "Generate a full cp backup" and let cPanel FTP it to a dummy account on the new server. Restore on new server and change nameservers for those 70 domains over the weekend.
METHOD 3: Run "/scripts/pkgacct username" on old server, move the tar.gz file to new new server. Restore on new server and change nameservers for those 70 domains over the weekend.
METHOD 4: Reduce TTL for A records on old server. Use WHM "Copy an account" on new server. Then modify DNS on old server to point to new server IPs. Now change nameservers at Registrar.
METHOD 5: Asking my datacenter people to use rsync etc. But this will move all data together,
how to transfer folder contains backups from my server to another one coz i have to relod the system .
i have another space on another server.
to transfer a MySQL database with way over 1 million rows to a different server.
What is the best way to do this without losing any data? I've tried using the export feature in phpMyAdmin but it doesn't seem to handle it very well.
There has to be a feature in WHM or cPanel,
is there any soft for windows who can transfer files from one server to another? I have Shell access on both servers but dont know how to do that via shell..is there any GUI soft for windows where I can on one window see files from one server and on other to see files from second server?
View 3 Replies View RelatedI have a dedicted server (Windows) i am not satisfy with the current company
In these days i decided to move to another company but the new company (liquidweb) reject to transfer the accounts from old server to the new one
I don't have much experince in windows server so any body can guide me to any company doing that for me? or any body can help me with best way to do that i will appreciate
1-current company using Plesk Version 7.6 and the New company using Version 8.1
2- I have about 40 accounts in my server
Are there any good software that will backup current server files and restore them on a new server?
I'm looking for full backup, that would backup all the files in less time instead of going to each account's cpanel first and downloading backup than restoring it to new server.
Could I Transfer Gzipped Files From 1 Server to Another?
I'm in the process of changing servers, and I was wondering if there was some sort of command where I Could transfer my backups to the new server?
One of my Cpanel servers is showing heavy data transfer this month. In 6 days, it crossed 600 GB data transfer which is equal to what it did last month. Also, all the websites collectively have only consumed around 60 GB data transfer in 6 days. How do I find out what exactly is causing heavy data transfer?
View 14 Replies View RelatedI have 2 servers connected privately..
The servers have a public and private ip.
For transfer privately bandwidth is not counted.
I wanted to know how to transfer data between 2 private servers?
Also is it possible to have symlink from one server to another (both servers connected privately also).