How Can I Arrange So Stats Are Not Loaded
May 11, 2007
How can I arrange so stats are not loaded?
IMPORTANT: Do not ignore this email.
This is cPanel stats runner on server.dealsreferals.com!
While processing the log files for user stnudee, the cpu has been maxed out for more than a 6 hour period. The current load/uptime line on the server at the time of this email is
09:35:21 up 6 days, 22:32, 0 users, load average: 2.76, 19.13, 52.20
You should check the server to see why the load is so high and take steps to lower the load. If you want stats to continue to run even with a high load; Edit /var/cpanel/cpanel.config and change extracpus to a number larger then 0 (run /usr/local/cpanel/startup afterwards to pickup the changes).
View 7 Replies
ADVERTISEMENT
May 23, 2008
I look after a number of sites and monitor their stats. We use both webalizer and AWSTATS so we can have a comparison. Up until recently the stats for both of them where relatively the same, webalizer usually showing higher numbers as it doesn't filter bots but the progression of increase and decrease in stats was proportional. However, over the last few months a curious trend is appearing, the stats in AWSTATS are decreasing every month whereas the stats in Webalizer are increasing, the gap between them now is huge.
View 0 Replies
View Related
Mar 3, 2009
I just had a quick question.
How big of a chance is there that a server will be overloaded, leading to a unreasonable ammount of downtime?
Let's say I pay about 8 dollars for shared hosting. With unreasonable ammount of downtime, I would say that a half hour a day is really unreasonable. Actually, I would say that downtime more than 10 minutes a day is unreasonable. Is it unreasonable, or am I unreasonable? If so, how much downtime should one expect?
View 14 Replies
View Related
May 6, 2009
I have a X3220 server with 4GB RAM.
OS is CentOS5.3 - 2.6.18-128.1.6.el5PAE
I tried to optimize system, but the RAM usage is just around 1.5GB with high CPU.
Quote:
top - 10:47:46 up 5:40, 2 users, load average: 6.39, 5.48, 5.06
Tasks: 380 total, 5 running, 374 sleeping, 0 stopped, 1 zombie
Cpu(s): 33.4%us, 7.6%sy, 0.0%ni, 58.8%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
Mem: 4151076k total, 1752388k used, 2398688k free, 73792k buffers
Swap: 2096472k total, 0k used, 2096472k free, 1315260k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1875 user-name 17 0 49680 24m 7156 R 6.6 0.6 0:00.20 php
1876 user-name 17 0 44560 19m 6928 R 3.0 0.5 0:00.09 php
20324 mysql 21 6 941m 109m 4152 S 1.7 2.7 5:41.42 mysqld
1877 user-name 15 0 36840 13m 5680 R 0.7 0.3 0:00.02 php
557 nobody 22 0 9304 2800 1424 S 0.3 0.1 0:00.01 httpd
1264 root 15 0 2464 1188 796 R 0.3 0.0 0:00.13 top
16261 nobody 19 0 9304 2860 1436 S 0.3 0.1 0:00.10 httpd
18795 nobody 15 0 9304 2860 1436 S 0.3 0.1 0:00.14 httpd
18821 nobody 15 0 9304 2820 1436 S 0.3 0.1 0:00.09 httpd
23618 nobody 15 0 9304 2824 1432 S 0.3 0.1 0:00.09 httpd
24209 root 16 0 2460 1196 796 S 0.3 0.0 0:09.13 top
27777 nobody 15 0 9304 2856 1436 S 0.3 0.1 0:00.31 httpd
29758 nobody 15 0 9304 2820 1432 S 0.3 0.1 0:00.05 httpd
29798 nobody 15 0 9304 2852 1432 S 0.3 0.1 0:00.04 httpd
I wonder why system uses around 1.5GB RAM only? How to put more data into RAM? This server is serving for a high traffic site. From apache status
Quote:
CPU Usage: u13.93 s9.29 cu1832.76 cs0 - 72.2% CPU load
42.4 requests/sec - 1.1 MB/second - 27.4 kB/request
156 requests currently being processed, 68 idle workers
View 1 Replies
View Related
Oct 28, 2009
how I can get rid of this?
Code:
[28-Oct-2009 16:01:08] PHP Warning: Module 'eAccelerator' already loaded in Unknown on line 0
View 4 Replies
View Related
Mar 24, 2008
After a reboot the networkscripts did not start properly. My Dc fixed/changed some things so named could start again.
Now my secondary ip has not been loaded (using directadmin btw).
What could have gone wrong, and how to fix it?
I don't really dare to reboot, because i can't get it online when named doesn't start (i have to call the dc again etc).
My logs showed this:
Directadmin log
2008:03:10-12:39:11: ioctl can't find the server's ip address for eth0 : Cannot assign requested address
2008:03:10-12:39:11: The ip of this machine () does not match the ip in the license file.<br>
Problem
Mar 10 12:34:34 apophis named[1753]: starting BIND 9.2.4 -u named -t /var/named/chroot
Mar 10 12:34:34 apophis named[1753]: using 2 CPUs
Mar 10 12:34:34 apophis named[1753]: loading configuration from '/etc/named.conf'
Mar 10 12:34:34 apophis named[1753]: ifiter_ioctl.c:236: REQUIRE(iter->pos < (unsigned int) iter->ifc.ifc_len) failed
Mar 10 12:34:34 apophis named[1753]: exiting (due to assertion failure)
Mar 10 12:34:34 apophis named: named startup failed
(temporary?)Fix by dc
Mar 10 12:39:56 apophis network: Shutting down loopback interface: succeeded
Mar 10 12:39:56 apophis sysctl: net.ipv4.ip_forward = 0
Mar 10 12:39:56 apophis sysctl: net.ipv4.conf.default.rp_filter = 1
Mar 10 12:39:56 apophis sysctl: net.ipv4.conf.default.accept_source_route = 0
Mar 10 12:39:56 apophis sysctl: kernel.sysrq = 0
Mar 10 12:39:56 apophis sysctl: kernel.core_uses_pid = 1
Mar 10 12:39:56 apophis network: Setting network parameters: succeeded
Mar 10 12:39:56 apophis network: Bringing up loopback interface: succeeded
Mar 10 12:39:57 apophis kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 10 12:39:57 apophis kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Mar 10 12:39:57 apophis kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Mar 10 12:39:58 apophis network: Bringing up interface eth0: succeeded
Mar 10 12:40:01 apophis directadmin: directadmin startup succeeded
View 0 Replies
View Related
Jun 21, 2009
just bought a script from filerun, try to load it
[url]
but .php file cant be encoded, any help would be nice.
you can see the conf [url]
View 2 Replies
View Related
Apr 21, 2009
I have installed the mod_geoip as easyapache optional module [url] and its being succesfully showed as an option in the easyapache list of modules, and apparently is installed and loaded, but its not working.
The easyapache log:
! Custom opt mod 'Cpanel::Easy::ModGeoIP' is using custom opt mod tarball '/var/cpanel/easy/apache/custom_opt_mods/Cpanel/Easy/ModGeoIP.pm.tar.gz' !!
-- Begin opt 'Mod GeoIP (Custom Opt Mod)' --
-- Begin step 'Installing GeoIP C Library' --
-- End step 'Installing GeoIP C Library' --
-- Begin step 'APXSing mod_geoip into apache' -- .....
View 3 Replies
View Related
Feb 8, 2008
I have a server that keeps dying on my mysteriously. I've loaded it with Windows 2003 and Linux. Both crash about once every other day. So I'm guessing this isn't a software issue, but a hardware one.
When it crashes the screen turns blank. Only a hardware reboot will work. The power doesn't go off though.
Anybody here experience something like this before? I'm guessing it's one of the following:Power supply
CPU
Motherboard
However I'm thinking it's probably not the power supply as the server is relatively idle. I did stress test the server and it didn't crash then.
The thing is, there are no event logs from the BIOS or anything.
View 2 Replies
View Related
Jun 16, 2008
[16-Jun-2008 17:13:17] PHP Warning: Module 'SQLite' already loaded in Unknown on line 0
[16-Jun-2008 17:13:17] PHP Warning: Module 'pdo_mysql' already loaded in Unknown on line 0
I'm getting this a lot lately on some of my websites with DB in use
Using a cpanel/centos box with mysql 5 and php 5
View 2 Replies
View Related
Oct 25, 2014
I have the follow errors at (one) of my plesk panel:
at Applications:
Search results could not be loaded at the moment. Retry Click to expand...
View 8 Replies
View Related
Oct 7, 2014
We use Plesk 12 with ubuntu 12.04.5 LTS ......
Plesk 12 does not create backups for Customers.
If we restarts the server, Plesk created again for 2 days backups and then again not. There are no errors present.
The backup should be loaded on a FTP backup server after the Create
This makes Plesk but only if you restarts the server. Otherwise, no backups are created or loaded on the FTP backup server.....
View 1 Replies
View Related
Sep 2, 2014
After successful upgrade PHP, and not successful with ioncube i get:
Failed loading /usr/lib/php/modules/ioncube_loader_lin_5.4.so: /usr/lib/php/modules/ioncube_loader_lin_5.4.so: cannot open shared object file: No such file or directory
PHP Warning: Module 'ionCube Loader' already loaded in Unknown on line 0
The ionCube PHP Loader is disabled because of startup problems.
PHP Warning: Module 'ionCube Loader' already loaded in Unknown on line 0
The ionCube PHP Loader is disabled because of startup problems.
PHP 5.4.32 (cli) (built: Aug 21 2014 07:33:35)
Copyright (c) 1997-2014 The PHP Group
Zend Engine v2.4.0, Copyright (c) 1998-2014 Zend Technologies
with the ionCube PHP Loader v4.6.1, Copyright (c) 2002-2014, by ionCube Ltd., andClick to expand...
View 4 Replies
View Related
May 16, 2007
Code:
root@srv01 [~]# free -m
total used free shared buffers cached
Mem: 10134 9598 535 0 249 7238
-/+ buffers/cache: 2109 8024
Swap: 4094 1 4093
root@srv01 [~]# Free
-bash: Free: command not found
root@srv01 [~]# free
total used free shared buffers cached
Mem: 10377476 9823916 553560 0 255984 7412716
-/+ buffers/cache: 2155216 8222260
Swap: 4192956 1032 4191924
View 5 Replies
View Related
Feb 17, 2007
Below are some results from various stats programs from one day's activity on our site. webaliser and awstats give sort of similar results (although still 6400 pageloads difference), but these results differ so much from what google (analytics) says.
can anyone think of an explanation for this? does google have a different definition of a visit compared to webaliser and awstats? for these latter two is visits = hits?
Webaliser 4000 visits, 17600 page views. Aw stats says 3800 visits, 24000 page views. google says 637, 1500 page views. adsense says 3,600 page views.
View 0 Replies
View Related
Nov 19, 2007
any hints for EXIM reject E-mail trying to be sent to an non-existent account on a domain hosted by me? I think the default configuration is to accept the E-mails and try to deliver, then it will fail and an E-mail will be sent to the sender
but many times the sender is fake (spammer) and this message will rest on queue for some days...
I was thinking on some filter like
"if ((!exist account@domain) && (!catchall domain)) reject"
but I don't know how to set something like that on EXIM
View 2 Replies
View Related
Apr 4, 2006
does anybody know if there is a possibility to circumvent godaddy´s pathetic stats they offer on shared accounts?
-I am not quite sure what tells you the unique visitors (always a good one to know )
-It doesn´t tell you what robots crawl your site. It just says: robots 28 (great!)
-The graphs are all reversed. Meaning that the now date is always on the very left hand corner of the x-axis towards the 0 intersection. This is pretty pathetic as it goes against anything human brains are accustomed to.
I´ve got to stop venting now. I would appreciate if somebody knows where I can find the unique visitors (hosts served maybe?) and how I can install a better stats program on Linux shared hosting at go daddy.
View 3 Replies
View Related
May 28, 2008
I have a hosting pack with them, its not bad, didnt had any downtime yet, but...
Disk Space1.30 TB
In Use849.04 GB(63.56 %)
Free Space 486.75 GB
CPU Load: 38%
Memory Used: 3.78 Gb of 3.96 Gb
View 14 Replies
View Related
Jan 2, 2008
When I go through my AWStats under "Links from an external page (other web sites except search engines)" I see several domains that have linked to me. When I visit these sites they are generally porn and drug sites that do not contain a link. Some of the sites redirect you to other sites. When you look up these domain names they are all from Russia.
These sites account for mulitple hits as high as +14.5%. These sites do not represent the content on my sites.
My questions are.
How do I stop this? I have found banning IP addresses does nothing.
How are they doing this?
Can this lead to your site being blacklisted?
View 11 Replies
View Related
Jun 18, 2007
Anything good out there that you recommend that does not need a lot of set up?
View 7 Replies
View Related
Mar 31, 2007
I'm aware of AwStats for Win and SmarterStats, but I'd like to know of any other, if available?
View 11 Replies
View Related
Jul 11, 2007
root@server [/scripts]# ./runweblogs username
Log checker loaded ok..
==> WARNING: The configured processor count does not match the
==> actual processor count (4)! Running log analysis programs
==> on this system may cause excessive load! You should set "extracpus"
==> to "0" in /var/cpanel/cpanel.config if this is not ok.
==> cPanel Log Daemon version 22.2
==> Shared RRDTOOL support enabled
==> Starting cpbandwd (bandwidth monitoring for IMAP/POP)
cpbandwd is already running.
Processing eldred...
Run Logs domain: domain.com BW Limit: 262144000000 Domains: [save.domain.com save.info store.domain.com]
Stats are not updating for this account. I ran this twice, keeps getting stuck at this line forever..
Run Logs domain: domain.com BW Limit: 262144000000 Domains: [save.domain.com save.info store.domain.com]
View 11 Replies
View Related
Mar 26, 2014
I am running Apache on a Windows server and it is up and running.I downloaded and installed:
Apache 2.4.9 Win32 [Apache VC11 Binary] httpd-2.4.9-win32-VC11.zip
And included ModSecurity from download: modules-2.4-win32-VC11.zip..
The version of ModSecurity is mod_security-2.7.7 . It is up and running, but I get a warning:
ModSecurity: Loaded PCRE do not match with compiled!
Here's the difference in the PCRE from the logs:
PCRE compiled version="8.33 "; loaded version="8.34 2013-12-15".
The compiled version does not match the loaded version. Is this something I should be concerned about and try to find compiled versions that match?
View 2 Replies
View Related
May 12, 2009
Recently started using HAProxy for load balancing / failover, and have the usage down. But, no matter how much I search I can't find one simple thing...
Anyone know of a way to customize the status page?
Seems to be a directive actually in the binary...I can't find a conf, include, anything to pass any customization to it. I'm talking about the /haproxy?stats URI.
View 0 Replies
View Related
Feb 19, 2008
I've a few similar video sites and haven't noticed much difference over the years with their stats. They usually average anywhere from 50-100mb downloaded per day.
Suddenly this month, one site is practically going off the scale...600-700mb...up to 1gb downloaded per day...I'm like...wtf?! The other site is reporting normal BW.
I'm using awstats with hotlink protection enabled.
Is something or someone draining my bandwidth?
View 3 Replies
View Related
Apr 21, 2008
I have always had a US based shared hosting service for my sites, but I'm about to move to a VPS and am not sure where to shop.
My unique visitor stats per continent, for my main site, for the last month, are:
Europe 24,889
Americas 16,002
Asia 1,446
Oceania 609
Africa 208
Is a Europe based VPS a no-brainer with these stats? Does it really make a difference?
View 7 Replies
View Related
Jan 14, 2007
I thought i may as well post this here having already contacted my host. Just thought you knowledgable people may be able to give me some insight to this?
Well i am creating a sub-domain, and i obviously have site stats with AWStats for my primary domain name. If i was to create a sub-domain say example.sitename.com would i still receive the site stats for the sub as well as the primary one?
Anyone had any experience on this?
as midphase are good but generally take ages to get back to me and their response are rather general,
View 3 Replies
View Related
May 20, 2007
because of following logs server disbled my dir . But i can what they tyr to say to me ?
for example what do following numbers mean ?
Code:
root@eagle [~]# ps aux | grep vbulletin
vbulletin 2277 1.0 0.3 24872 14460 ? SN 02:34 0:00 /usr/bin/php index.php
vbulletin 19632 1.1 0.3 24872 14456 ? SN 02:34 0:00 /usr/bin/php index.php
vbulletin 1887 1.3 0.3 24872 14460 ? SN 02:34 0:00 /usr/bin/php index.php
vbulletin 28620 4.4 0.3 24796 14460 ? SN 02:35 0:00 /usr/bin/php index.php
vbulletin 3511 4.5 0.3 24796 14460 ? SN 02:35 0:00 /usr/bin/php index.php
vbulletin 30745 5.1 0.3 24796 14460 ? SN 02:35 0:00 /usr/bin/php index.php
vbulletin 13859 5.0 0.3 24796 14460 ? SN 02:35 0:00 /usr/bin/php index.php
vbulletin 6864 4.8 0.3 24608 14204 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 19513 4.7 0.3 24608 14176 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 29706 5.0 0.3 24608 14156 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 10099 4.8 0.3 24608 14196 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 7125 5.3 0.3 24608 14204 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 29849 3.8 0.3 24396 14028 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 3634 4.3 0.3 24396 13984 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 14476 4.8 0.3 24404 13972 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 19630 4.1 0.3 24180 13668 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 20126 3.5 0.3 23912 13500 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 20727 3.5 0.2 22664 12148 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 2332 5.0 0.2 22824 12304 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 19602 6.3 0.3 23772 13344 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 20436 5.3 0.3 23032 12552 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 12178 8.0 0.3 22964 12512 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 16656 10.0 0.2 21628 11180 ? RN 02:35 0:00 /usr/bin/php index.php
vbulletin 16012 7.0 0.1 18612 7888 ? RN 02:35 0:00 /usr/bin/php index.php
root 4547 0.0 0.0 3736 660 pts/1 R+ 02:35 0:00 grep vbulletin
View 3 Replies
View Related
Jun 5, 2007
I have a pretty active phpBB forum. I was looking at my stats today and I notice some strange referrals. I checked it out and it and it is a bunch of spam sites. But with a link to one of my threads in the bottom (different per spam site).
- The spam sites have nothing related to my content
- The link to the threads in my forum has no relation to each other.
- Out of all the sites to put, why mine? My forum is not a very very popular forum.
I can post the link if it will better understand the above situation.
I just like to know why and what purpose does it serve? Also is it bad for me? As it is a spam site is linking to my forum. I dunno if search engines will think my site is a spam site as well.
View 2 Replies
View Related
Jan 30, 2007
My current "manager" it his all "great time" couldnt fix irt whole day so I am looking for experienced manager to check and fix my problem, let me know how much you charge per 1h and what's your experience,
View 2 Replies
View Related
