Foundry Bigiron ICMP Checksum Is Wrong!

Aug 28, 2007

I recently installed a foundry bigiron 4000 with a B8MGR3 running version: 07.1.18T53

When ever I tracert outbound using a unix box, it gives me a ICMP checksum is wrong error. Before I had this switch installed, i never had this issue! Could it be this version i am running?? And this ICMP error happens on all of my unix boxes.

View 14 Replies


ADVERTISEMENT

ICMP Checksum Is Wrong

Jun 25, 2007

I've noticed in a few unrelated traceroutes from my dedicated server the error message shown below. Is this likely to be an issue with my provider or just a general backbone issue? It seems to show up after 4 or 5 hops on routers belonging to a number of different backbone providers.

More importantly does it indicate that there is packet loss/corruption on the line?

Code:
# traceroute www.cisco.com
traceroute to www.cisco.com (198.133.219.25), 30 hops max, 46 byte packets
1 XXX.XXX.XXX.XXX (XXX.XXX.XXX.XXX) 0.354 ms 0.294 ms 0.289 ms
2 66.154.95.219 (66.154.95.219) 0.486 ms 0.362 ms *
3 216.89.82.73 (216.89.82.73) 1.353 ms 1.047 ms 0.815 ms
4 dcr1-so-4-3-0.Atlanta.savvis.net (208.172.75.109) 2.617 ms 3.605 ms *
5 cw-gw.attga.ip.att.net (192.205.32.117) 2.892 ms 1.138 ms 1.178 ms
Icmp checksum is wrong
6 tbr2.attga.ip.att.net (12.122.81.154) 55.510 msIcmp checksum is wrong
55.077 msIcmp checksum is wrong
55.550 ms
Icmp checksum is wrong
7 tbr1.dlstx.ip.att.net (12.122.2.89) 54.579 msIcmp checksum is wrong
55.069 msIcmp checksum is wrong
54.964 ms
Icmp checksum is wrong
8 tbr1.la2ca.ip.att.net (12.122.10.50) 55.622 msIcmp checksum is wrong
55.462 msIcmp checksum is wrong
56.408 ms
9 gar1.sj2ca.ip.att.net (12.122.2.249) 53.999 ms 54.947 ms 53.960 ms
10 12.118.124.10 (12.118.124.10) 54.596 ms 54.329 ms 54.727 ms
11 sjce-dmzbb-gw1.cisco.com (128.107.239.53) 58.822 ms 68.721 ms 79.009 ms

View 6 Replies View Related

Foundry Bigiron: Duplicate Gateway IP Address

Oct 5, 2009

We are having some problems with a Foundry Bigiron 4000.

The hardware config is as following:

- Bigiron 4000 chassis

- 2x B8GMR3-A management (active + standby)

- 2x B24E

Once every couple of days now, we get the following error in syslog:

Code:
2009-10-05 20:40:00User.Warning8x.xx.50.1Oct 5 20:39:59 gateway IP: IP: Duplicate IP address 8x.xx.38.1 detected sent from MAC address 0004.d3ea.e200 interface 3/13, 1 packets, first packet received at time 1 days 20 hours 41 minutes 37 seconds since bootup!............

View 4 Replies View Related

Foundry BigIron 8000, CPU Overloading And BGP Flapping

Jul 31, 2007

I know there's been discussion regarding Foundry BigIron's and their capabilities of running L3 and L2 at the same time.

I have a friend who is running a BigIron 8000 and only pushing just over 100Megabits on it, however once every few hours he experiences a BGP flap and one of the CPU's maxes out. He is running both Layer 3 and Layer 2 on it.

When the issue occur's, new connections do not open, but currently opened connections continue to operate.

Is there a specific packet type that is causing this to happen? Does anyone have any insight? It is running the latest firmware.

View 6 Replies View Related

Apache :: Checksum Not Verified?

Apr 15, 2013

I downloaded the zip file httpd-2.4.4-win32.zip and ran winmd.exe. I checked the checksum value against those in the file online and they did not match.

View 2 Replies View Related

Many ICMP Packets - I'm Being Hit

Nov 24, 2008

My server is being hit by many ICMP packets. Very abnormal but many of them a from indonesian IP.

My server runs on cPanel + CSF.

Should I change CSF to APF? I read most antiDOS attack articles ICMP; eth0; 48 bytes; from 68.66.136.118.fast.net.id to pete.myserver.com; fragment
Tue Nov 25 00:47:52 2008; ICMP; eth0; 1368 bytes; from 125.167.122.253 to pete.myserver.com; echo req
Tue Nov 25 00:47:52 2008; ICMP; eth0; 48 bytes; from 179.subnet125-160-99.speedy.telkom.net.id to pete.myserver.com; fragment
Tue Nov 25 00:47:52 2008; ICMP; eth0; 1468 bytes; from 118.100.245.111 to pete.myserver.com; echo req
Tue Nov 25 00:47:52 2008; ARP request for 202.71.103.231; eth0; 40 bytes; from 0011bb064fc1 to ffffffffffff
Tue Nov 25 00:47:52 2008; ICMP; eth0; 1368 bytes; from 202.152.37.210 to pete.myserver.com; echo req
Tue Nov 25 00:47:52 2008; ICMP; eth0; 1368 bytes; from 202.152.37.210 to pete.myserver.com; echo req
Tue Nov 25 00:47:52 2008; ICMP; eth0; 1368 bytes; from 202.6.234.126 to pete.myserver.com; echo req
note: pete.myserver.com is my server
please advise solution it's causing me 10mbps of inbound bandwidth. my bandwidth is sufficient to handle those for now, but not for long if they increase. my munin shows 20mbps last night

View 5 Replies View Related

Route Between Vlans In Same Subnet On BigIron

Jun 9, 2007

I'm looking for a solution that I can place a firewall between 2 vlans on
a BigIron router with L3 enabled.

For this moment there is one big vlan2 with a ip-route 0.0.0.0 0.0.0.0
123.123.123.123 and a router-interface ve2 with the IP of the router, the
address I use as gateway on the machines behind it.

The WAN port has the IP address to communicate with to the GW of the
carrier-router (123.123.123.122)

Because I want to let the BigIron the routing I was thinking of 2 vlans,
one for the lan-vlan and one for the wan-vlan, but this will be a problem
because I only have one IP-block what I can use.

So the sitiuation must be as follow on the BigIron:

WAN => vlan2 => firewall => vlan3(lan)

Because of the fact that the firewall will be transparent, this should be
no problem to place it between the vlans. The actual problem is how to
manage this. In simple words, I should be able to replace the firewall
with a cross-cable and it should still work.

Cisco for an example has a SVI solution for this, but I can't find such
thing for a Foundry router.

View 0 Replies View Related

Terminal Connection To Foundry 2402CF

May 31, 2008

I'd setup a Foundry 2402CF at home with a terminal port connection. When I got it to the data center I could not connect to the terminal port using the same connection settings I used at home.

Thought it might be the cable, so tested it with an FWS2, which worked fine.

Could the port have gone bad on the trip to the DC, or is there some security setting I'm missing?

View 6 Replies View Related

Plesk 11.x / Linux :: DNS Firewall - No IPV6 Answer To ICMP Requests

Nov 9, 2012

I've discovered an annoying problem in Plesk 11.

When you register a .fr domain name, you need to have a Success ZoneCheck at [URL] ....

The test fail because the server didn't answer to ICMP IPv6 requests.

Error: The server does not listen to or does not answer in UDP on the port 53 (on the IpV6)

My question is: How to open port 53 on IPv6 for ICMP requests ?

This is functional with IPv4 But not IPv6.

There are some rules in the Plesk Firewall, but it seems not working at all.

View 4 Replies View Related

Foundary Bigiron 4000 B8GMR3 Cannot Boot

Aug 13, 2007

I've exausted my self attempting to load on a boot image to the management blade for a project that i'm doing with a few friends.

I just bought this Foundary *off ebay of course* and who ever had it last removed the image! I mean I cant even get into the primary or secondary. I tried booting from tftp, but everytime that happens, the switch just restarts and then doesnt boot up again. This is what i'm getting.

Code:
BOOT INFO: RESET ANY
master arbitrate : become primary arbitrator.
BOOT INFO: Become active CPU module
M2 BI Boot Code Version 06.05.00
Enter 'b' to go to boot monitor ...
BOOT INFO: load from primary copy
BOOT ERR: bad code image header
BOOT INFO: load from secondary copy
BOOT ERR: bad code image header
BOOT INFO: try to boot from bootp server
bootp timed out, bootp-tftp process aborted!
BOOT ERR: bootp failed

I currently have the B2R07601b.BIN image, just I dont know how to load the file onto the blade via tftp or any other method.

View 5 Replies View Related

Cisco Catalyst 2960G Vs. Foundry FLS624

Dec 11, 2007

We're evaluating options on new switch deployments and wish for advise or opinions. We have experience with 2950's but want to move up into all gigabit devices. They will be used for pure L2 purposes as front-end access switches for server racks.

For our needs (24 port, all ethernet, L2 only) it looks like these two competing models fit our requirements and budget:

Cisco Catalyst 2960G (about $2150):

Switching: 32Gbps
Forwarding: 35.7Mpps

Foundry FLS624 (about $2400):

Switching: 108Gbps
Forwarding: 161Mpps

It's a tough decision because we have no experience with Foundry products, but from the spec sheets the price vs. performance ratio seems amazing (almost too good to be true).

You have to wonder if they get their ratings only under one specific situation in which you never encounter in "real world" use.

For those of you using Foundry what models are you using for your access switches to your web severs? Is there a better model for our application? What's your overall opinion of the products and service? Would you invest your entire network to them?

We have a mix of various vendors right now for switching / routing (Juniper, Cisco and Riverstone), but looking to the future being more vendor centric to either Cisco or Foundry for switching will be the model (using Juniper for routing). We've also considered other vendors such as HP, Extreme, etc, but ruled these out for a variety of reasons.

View 11 Replies View Related

Something Wrong With My APF

Mar 5, 2008

i have CentOs5 / Plesk Panel / VPS Server ...

and i install APF now with this /etc/apf/conf.apf FILE ......

PHP Code:

IG_TCP_CPORTS="20,21,22,25,53,80,110,143,443,465,993,995,8443"IG_UDP_CPORTS="37,53,873"EGF="1"EG_TCP_CPORTS="20,21,22,25,53,37,43,80,113,443,465,873,5224"EG_UDP_CPORTS="53,873" 

==================================

and i changed the interface to this venet0

PHP Code:

# Untrusted Network interface(s); all traffic on defined interface will be# subject to all firewall rules. This should be your internet exposed# interfaces. Only one interface is accepted for each value.IFACE_IN="venet0"IFACE_OUT="venet0" 

==================================

when i finish it and restart my apf its shows me like this ???

PHP Code:

[root@box ~]# apf -sapf(3107): {glob} activating firewallapf(3149): {glob} determined (IFACE_IN) venet0 has address 127.0.0.1apf(3149): {glob} determined (IFACE_OUT) venet0 has address 127.0.0.1apf(3149): {glob} loading preroute.rulesiptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295apf(3149): {resnet} downloading http://r-fx.ca/downloads/reserved.networksapf(3149): {resnet} download of http://r-fx.ca/downloads/reserved.networks failedapf(3149): {glob} loading reserved.networksapf(3149): {glob} SET_REFRESH is set to 10 minutesapf(3149): {glob} loading bt.rulesapf(3149): {dshield} downloading http://feeds.dshield.org/top10-2.txtapf(3149): {dshield} download of http://feeds.dshield.org/top10-2.txt failedapf(3149): {sdrop} downloading http://www.spamhaus.org/drop/drop.lassoapf(3149): {sdrop} parsing drop.lasso into /etc/apf/sdrop_hosts.rulesapf(3149): {sdrop} loading sdrop_hosts.rulesapf(3149): {glob} loading common drop portsapf(3149): {blk_ports} deny all to/from tcp port 135:139apf(3149): {blk_ports} deny all to/from udp port 135:139apf(3149): {blk_ports} deny all to/from tcp port 111apf(3149): {blk_ports} deny all to/from udp port 111apf(3149): {blk_ports} deny all to/from tcp port 513apf(3149): {blk_ports} deny all to/from udp port 513apf(3149): {blk_ports} deny all to/from tcp port 520apf(3149): {blk_ports} deny all to/from udp port 520apf(3149): {blk_ports} deny all to/from tcp port 445apf(3149): {blk_ports} deny all to/from udp port 445apf(3149): {blk_ports} deny all to/from tcp port 1433apf(3149): {blk_ports} deny all to/from udp port 1433apf(3149): {blk_ports} deny all to/from tcp port 1434apf(3149): {blk_ports} deny all to/from udp port 1434apf(3149): {blk_ports} deny all to/from tcp port 1234apf(3149): {blk_ports} deny all to/from udp port 1234apf(3149): {blk_ports} deny all to/from tcp port 1524apf(3149): {blk_ports} deny all to/from udp port 1524apf(3149): {blk_ports} deny all to/from tcp port 3127apf(3149): {blk_ports} deny all to/from udp port 3127apf(3149): {pkt_sanity} set active PKT_SANITYapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ALL NONEapf(3149): {pkt_sanity} deny inbound tcp-flag pairs SYN,FIN SYN,FINapf(3149): {pkt_sanity} deny inbound tcp-flag pairs SYN,RST SYN,RSTapf(3149): {pkt_sanity} deny inbound tcp-flag pairs FIN,RST FIN,RSTapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ACK,FIN FINapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ACK,URG URGapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ACK,PSH PSHapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ALL FIN,URG,PSHapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ALL SYN,RST,ACK,FIN,URGapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ALL ALLapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ALL FINapf(3149): {pkt_sanity} deny outbound tcp-flag pairs ALL NONEapf(3149): {pkt_sanity} deny outbound tcp-flag pairs SYN,FIN SYN,FINapf(3149): {pkt_sanity} deny outbound tcp-flag pairs SYN,RST SYN,RSTapf(3149): {pkt_sanity} deny outbound tcp-flag pairs FIN,RST FIN,RSTapf(3149): {pkt_sanity} deny outbound tcp-flag pairs ACK,FIN FINapf(3149): {pkt_sanity} deny outbound tcp-flag pairs ACK,PSH PSHapf(3149): {pkt_sanity} deny outbound tcp-flag pairs ACK,URG URGapf(3149): {pkt_sanity} deny all fragmented udpapf(3149): {pkt_sanity} deny inbound tcp port 0apf(3149): {pkt_sanity} deny outbound tcp port 0apf(3149): {blk_p2p} set active BLK_P2Papf(3149): {blk_p2p} deny all to/from tcp port 1214apf(3149): {blk_p2p} deny all to/from udp port 1214apf(3149): {blk_p2p} deny all to/from tcp port 2323apf(3149): {blk_p2p} deny all to/from udp port 2323apf(3149): {blk_p2p} deny all to/from tcp port 4660:4678apf(3149): {blk_p2p} deny all to/from udp port 4660:4678apf(3149): {blk_p2p} deny all to/from tcp port 6257apf(3149): {blk_p2p} deny all to/from udp port 6257apf(3149): {blk_p2p} deny all to/from tcp port 6699apf(3149): {blk_p2p} deny all to/from udp port 6699apf(3149): {blk_p2p} deny all to/from tcp port 6346apf(3149): {blk_p2p} deny all to/from udp port 6346apf(3149): {blk_p2p} deny all to/from tcp port 6347apf(3149): {blk_p2p} deny all to/from udp port 6347apf(3149): {blk_p2p} deny all to/from tcp port 6881:6889apf(3149): {blk_p2p} deny all to/from udp port 6881:6889apf(3149): {blk_p2p} deny all to/from tcp port 6346apf(3149): {blk_p2p} deny all to/from udp port 6346apf(3149): {blk_p2p} deny all to/from tcp port 7778apf(3149): {blk_p2p} deny all to/from udp port 7778apf(3149): {glob} loading log.rulesapf(3149): {glob} virtual net subsystem disabled.apf(3149): {glob} loading main.rulesapf(3149): {glob} opening inbound tcp port 20 on 0/0apf(3149): {glob} opening inbound tcp port 21 on 0/0apf(3149): {glob} opening inbound tcp port 22 on 0/0apf(3149): {glob} opening inbound tcp port 25 on 0/0apf(3149): {glob} opening inbound tcp port 53 on 0/0apf(3149): {glob} opening inbound tcp port 80 on 0/0apf(3149): {glob} opening inbound tcp port 110 on 0/0apf(3149): {glob} opening inbound tcp port 143 on 0/0apf(3149): {glob} opening inbound tcp port 443 on 0/0apf(3149): {glob} opening inbound tcp port 465 on 0/0apf(3149): {glob} opening inbound tcp port 993 on 0/0apf(3149): {glob} opening inbound tcp port 995 on 0/0apf(3149): {glob} opening inbound tcp port 8443 on 0/0apf(3149): {glob} opening inbound udp port 37 on 0/0apf(3149): {glob} opening inbound udp port 53 on 0/0apf(3149): {glob} opening inbound udp port 873 on 0/0apf(3149): {glob} opening outbound tcp port 20 on 0/0apf(3149): {glob} opening outbound tcp port 21 on 0/0apf(3149): {glob} opening outbound tcp port 22 on 0/0apf(3149): {glob} opening outbound tcp port 25 on 0/0apf(3149): {glob} opening outbound tcp port 53 on 0/0apf(3149): {glob} opening outbound tcp port 37 on 0/0apf(3149): {glob} opening outbound tcp port 43 on 0/0apf(3149): {glob} opening outbound tcp port 80 on 0/0apf(3149): {glob} opening outbound tcp port 113 on 0/0apf(3149): {glob} opening outbound tcp port 443 on 0/0apf(3149): {glob} opening outbound tcp port 465 on 0/0apf(3149): {glob} opening outbound tcp port 873 on 0/0apf(3149): {glob} opening outbound tcp port 5224 on 0/0apf(3149): {glob} opening outbound udp port 53 on 0/0apf(3149): {glob} opening outbound udp port 873 on 0/0apf(3149): {glob} opening inbound icmp type 3 on 0/0apf(3149): {glob} opening inbound icmp type 5 on 0/0apf(3149): {glob} opening inbound icmp type 11 on 0/0apf(3149): {glob} opening inbound icmp type 0 on 0/0apf(3149): {glob} opening inbound icmp type 30 on 0/0apf(3149): {glob} opening inbound icmp type 8 on 0/0apf(3149): {glob} opening outbound icmp all on 0/0iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295apf(3149): {glob} resolv dns discovery for 207.218.192.38iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295apf(3149): {glob} loading postroute.rules 

View 6 Replies View Related

Wrong SSL Certificates Being Used

May 21, 2007

I'm just looking for some background information or a place where I can learn more about this.

Here's the problem:

The web site runs on a dedicated Apache server. There's 2 SSL certificates installed, one for e-commerce for https://www.mysite.com and one to help with the administrative interface for https://admin.mysite.com. I run a custom php application that forces the web page from http://www.mysite.com to https://www.mysite.com when going to an e-commerce page.

Generally everything runs Ok but a few times this year there has been a problem where the php application points to https://www.mysite.com/ecom.php but instead it gets https://admin.mysite.com/ecom.php and gets a page not found.

In discussing this with my web hosting company they claim they haven't changed anything but they do manage to fix the problem and get the web site working correctly again.

I generally figure that the web hosting company has done some type of maintenance on the web server and messed-up the dns entries or something for the SSL part of the web site but this is really outside my area of experience. I'm trying to understand what went wrong and where the entries are that determine when going to SSL which SSL certificate/URL is used.

View 2 Replies View Related

APF+BFD Ban For Wrong Username

Jun 1, 2008

My server with APF (firewall script) with BFD logs over 1215 events today of some hack user or bot trying to login to my server from various of IP trying many kind of usernames...

Is it possible to customize BFD to automatically ban the IP directly if the username they try to login with it was wrong 2 times?

For example the username is qwerty
The hack is trying with many usernames john, root, master, boot, etc...

View 5 Replies View Related

Wrong Cpu Reported

Jul 25, 2008

A friend of mine has a server that the provider claims is a Core2Duo, but looking at /proc/cpuinfo, the cpu is shown as:

Intel(R) Pentium(R) D CPU 000 @ 1.86GHz

What would cause this? I'm not saying the host is lying, I've just never seen this before and I haven't found anyone else with this problem on google. The processor is supposed to be a e6300, so the 1.86GHz speed is right. Also, this has happened on 2 different linux distros.

View 7 Replies View Related

Something Wrong With My Nameservers

May 17, 2007

I've been told by a few people that something's wrong with my nameservers. But I'm not sure what it is that's wrong.

the site => www.visualpoetry.ca

the DNSs: ns1.visualpoetry.ca / ns2.visualpoetry.ca

a zone check says:

Quote:

---- warning ----
w: Nameservers are all part of the same AS

* Adv: ZoneCheck

To avoid loosing all connectivity with the autoritative DNS in case of a routing problem inside your Autonomous System, it is advised to host the DNS on different AS.

*
All the nameservers are part of the same Autonomous System (AS number 30058), try to have some of them hosted on another AS.

* generic

w: Host doesn't reply to ICMP requests (firewall?)

* ns1.wablue.info./66.90.101.202
* ns2.wablue.info./66.90.65.34

w: Reverse for the nameserver IP address doesn't match

* ns2.wablue.info./66.90.65.34
* ns1.wablue.info./66.90.101.202

I'm not sure how to interpret this.

View 7 Replies View Related

Something Wrong With DNS Settings

Jun 4, 2007

I have bought a dedicated server with FDC servers and installed a script. Initially everything was working fine but now the site is not accessible. Everything is alright with the script installed but looks like there is some issue with the DNS settings. When I ping the IP address (it's dedicated ip address) it gives me an error. When I Ping the domain name, it just closes the window after few mins. Can someone experienced with WHM help me to fix the DNS settings? Of course, I am ready to pay for your help (though i might not have a very higher budget)

View 5 Replies View Related

What's Wrong With MY Mysql

Feb 22, 2007

I have a mysql-only server and the server is constantly > 30 in server load. I'm ousted as to what is wrong with mysql and what can be done to optimize it. Using mysql report to generate the following:

Quote:

MySQL 4.1.22-standard uptime 0 0:22:30 Thu Feb 22 07:14:45 2007

__ Key _________________________________________________________________
Buffer used 30.93M of 256.00M %Used: 12.08
Current 60.41M %Usage: 23.60
Write ratio 0.891
Read ratio 0.001

__ Questions ___________________________________________________________
Total 416.13k 308.2/s
DMS 136.54k 101.1/s %Total: 32.81
Com_ 120.17k 89.0/s 28.88
COM_QUIT 117.10k 86.7/s 28.14
QC Hits 44.35k 32.9/s 10.66
-Unknown 2.04k 1.5/s 0.49
Slow 19 0.0/s 0.00 %DMS: 0.01
DMS 136.54k 101.1/s 32.81
SELECT 82.50k 61.1/s 19.82 60.42
UPDATE 27.28k 20.2/s 6.56 19.98
REPLACE 10.85k 8.0/s 2.61 7.95
INSERT 7.98k 5.9/s 1.92 5.84
DELETE 7.93k 5.9/s 1.91 5.81
Com_ 120.17k 89.0/s 28.88
change_db 119.37k 88.4/s 28.69
admin_comma 791 0.6/s 0.19
show_variab 3 0.0/s 0.00

__ SELECT and Sort _____________________________________________________
Scan 6.38k 4.7/s %SELECT: 7.73
Range 6.35k 4.7/s 7.70
Full join 0 0/s 0.00
Range check 0 0/s 0.00
Full rng join 0 0/s 0.00
Sort scan 3.99k 3.0/s
Sort range 9.92k 7.4/s
Sort mrg pass 1.27k 0.9/s

__ Query Cache _________________________________________________________
Memory usage 5.85M of 32.00M %Used: 18.28
Block Fragmnt 22.41%
Hits 44.35k 32.9/s
Inserts 75.31k 55.8/s
Insrtrune 75.31k:1 55.8/s
Hit:Insert 0.59:1

__ Table Locks _________________________________________________________
Waited 54.03k 40.0/s %Total: 31.44
Immediate 117.80k 87.3/s

__ Tables ______________________________________________________________
Open 763 of 1500 %Cache: 50.87
Opened 769 0.6/s

__ Connections _________________________________________________________
Max used 651 of 650 %Max: 100.15
Total 119.74k 88.7/s

__ Created Temp ________________________________________________________
Disk table 24 0.0/s
Table 3.75k 2.8/s
File 2.55k 1.9/s

__ Threads _____________________________________________________________
Running 106 of 132
Cached 36 of 128 %Hit: 96.43
Created 4.28k 3.2/s
Slow 4 0.0/s

__ Aborted _____________________________________________________________
Clients 5.28k 3.9/s
Connects 1.16k 0.9/s

__ Bytes _______________________________________________________________
Sent 2.03G 1.5M/s
Received 159.51M 118.2k/s

And my my.cnf

Quote:

[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
max_connections = 650
key_buffer = 256M
myisam_sort_buffer_size = 64M
skip-locking
join_buffer_size = 1M
read_buffer_size = 1M
sort_buffer_size = 1M
table_cache = 1500
thread_cache_size = 128
wait_timeout = 10
connect_timeout = 5
tmp_table_size = 128M
max_allowed_packet = 36M
max_connect_errors = 10
query_cache_limit = 1M
query_cache_size = 32M
query_cache_type = 1
max_user_connections =600
[mysql.server]
user=mysql
basedir=/var/lib

[mysqld_safe]
err-log=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid

[mysqldump]
quick
max_allowed_packet = 16M

[myisamchk]
key_buffer = 64M
sort_buffer = 64M
read_buffer = 16M
write_buffer = 16M

[mysqlhotcopy]
interactive-timeout

View 5 Replies View Related

Wrong Disk Usage In WHM

Jul 11, 2009

I'm having a problem with my /usr. When I check it through WHM it's 100% full. But when I check it through SSH ( du -sh /usr ). it's almost 50% full

is there a way to let WHM recalculates the disk usage for /usr.

i already tried to empty it. but the 100% in WHM never changed. I deleted about 3GB of files. but in WHM, still saying 9.4GB used from 9.9GB

View 14 Replies View Related

Cant Go Wrong With Servint Vs Wiredtree Vps

Jul 28, 2008

ServInt:
speedtest 300-500kb/s from SF
burstable ram
99.730% uptime (hyperspin)
great customer service

Wiredtree:
speedtest 80-200kb/s from SF
no burstable ram
99.993% uptime (hyperspin)
great customer service

what to do....

can any servint vps users please PM me their url?

View 2 Replies View Related

Wrong Works Mod_layout

Jun 8, 2008

We Ask to forgive the bad English.

All orderly ed without mistake.
Apache/1.3.41

add In httpd.conf to virtual őîńňó for instance:
LayoutHeader "<H1>Test</H1>"

the text appears, but not there where it is necessary:

<H1>TEST</H1>
........
<head>
<title>title</title>
<meta http-equiv="Content-Type" content="text/html; charset==utf-8"/>
</head>
<body>
the text of the site.....

That is required?
It is Necessary ÷ňîá was removed so:

..........
<head>
<title>title</title>
<meta http-equiv="Content-Type" content="text/html; charset==utf-8"/>
</head>
<body><H1>TEST</H1>........

View 5 Replies View Related

Wrong Server Infomations

Oct 6, 2007

I have Core2Quad Q6600 + CentOs 5.0, Cpanel/WHM, but when i check Server Information i saw this:

Quote:

Processor #1 Vendor: GenuineIntel
Processor #1 Name: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Processor #1 speed: 1596.000 MHz
Processor #1 cache size: 4096 KB

Processor #2 Vendor: GenuineIntel
Processor #2 Name: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Processor #2 speed: 1596.000 MHz
Processor #2 cache size: 4096 KB

Processor #3 Vendor: GenuineIntel
Processor #3 Name: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Processor #3 speed: 1596.000 MHz
Processor #3 cache size: 4096 KB

Processor #4 Vendor: GenuineIntel
Processor #4 Name: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Processor #4 speed: 2394.000 MHz
Processor #4 cache size: 4096 KB

Can anyone tell my why it doesn't show correct speed.

Quote:

Processor #3 Vendor: GenuineIntel
Processor #3 Name: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Processor #3 speed: 1596.000 MHz
Processor #3 cache size: 4096 KB

View 1 Replies View Related

What Could Go Wrong With Unmanaged Windows VPS

Jul 21, 2007

While server (as whole) is [presumeabily] fully managed by hosting company in their own interest - then what could really go wrong with unmanaged Windows VPS.

View 1 Replies View Related

What The Heck Is Wrong With HOTMAIL

Aug 3, 2007

I am not sure if this is the right forum, i am just so frustrated with hotmail. Unfortunetly most of my clients use hotmail. After 2-3 communications in the same day, Hotmail decides i am a spammer and blocks mails from my domain. Thats were the fun starts and frustation begins. My host do not support sender id, anyone have same issues?

View 5 Replies View Related

Whats Wrong With Vpscolo

Oct 14, 2007

All my sites are down raised tickets for the last 2 days still no answers

View 11 Replies View Related

Are We Wrong If We Ask For Government ID Before We Accept Paypal?

Sep 16, 2009

If some body pays by paypal for some services we need to verify that it is not a fraud so he has to fill up a form and send a government issued ID. but please see this chat conversation. the customer is reluctant to do so see the chat

======
Guest: photo id?
Guest: i am verified paypal.
Guest: why all this.
Guest: sorry, i can't send you something like that.
Guest: no one ask me something like that I have 25 servers
Guest: in europe, usa, asia
===============

Are we wrong?

View 14 Replies View Related

WHM: Domain Name Server (DNS) Sometimes Resolves To Wrong IP

Jun 3, 2009

I have a dedicated WHM server (qumbia.org) with several CPanel accounts, among them:

- qumibiao (qumbia.org).
- qumbiaca (qumbia.ca).

Both of these accounts were set to the same ip (70.86.221.122).

15 days ago, I changed qumbiaca to the ip 70.86.221.123

Since, some requests (about 1% of the total according to my logs) for qumbia.ca are still serving up what's in /home/qumbiao/public_html

I know next to nothing about this, but perhaps some ISPs have cached the 70.86.221.122 IP and are directing requests there? Still, why wouldn't WHM, upon receiving such a request, resolve it to the right address, it being on the same server?

My Time to live record is set to 24 hours on my DNS, and the expire header set to 41 days.

Might it be a good idea to set up a new DNS (NS3.QUMBIA.ORG) on my WHM and give that DNS to qumbia.ca? Would this force the ISPs to reset their cache? Or does the problem lie elsewhere? Should I just wait out the 41-day expire period and hope for the best?

View 4 Replies View Related

FDC Servers LLC - Wrong Business Ethics

Apr 9, 2008

I completely amazed on how this Company has managed to engineer their TOS & AUP in such a way that they can in essence discriminate, destroy your hardware and steal your money in the process...

The developed some type of a bias against me, and then the true colors came out. It all started with a simple argument over a Cpanel License on a VDS that I had rented from them. I decide to send my own server instead to save a few dollars and I overnight the box.

-- For support to tell me that the brand new Corsair 750Watt PS is dead. We had sealed the server with stickers to ensure that no one would open it and tamper with the hardware inside. That's the first thing they did, was to remove the stickers and pretend that they PS was dead and that they had to Trouble Shoot.

-- I get the power supply back and it was in perfect working condition, obviously after they had made a few dollars on handling the shipping.

-- I asked them my options and they then try to make me buy a PS from them. Until I ship another one in. They let that ride 2 days until I send a ticket for a reboot. Right away, ohh that PS apparently died right there and then. 4 minutes after I open the ticket asking for a reboot.

> Then I notice some type of QoS going on specifically on my IP. As I know a few others that have servers there and we verified the routes back to our local provider. My upload was about 50kbps. I inquire to get the usual "routes" cannot be controlled.
As well I would see when downloading something from my box; the speeds would startup at max out and throttle all the way down to around 50kbps and maintain. From different local points as well.

> Anyhow I decide not to complain and to pay. Thus I get 2x Internap dedicated bandwidth @ $225.00 a month + $99.00. 1x Internap per Eth interface. That is after I had already paid them $269.00 for the initial VDS as well which I never got a refund for, that was just wasted money now.

> I got to enjoy that for about 8 days. Until I asked for a reboot before I messed up accidently a ifconfig command. That's when it went again, from ohhh the box is rebooted. Took about 4 hours, three techs telling me it was beeing rebooted. Never could I connect again. Then I ask them if I they have perhaps KVM over IP so I Can take care of the problem and save them time. All of a sudden the story evolves to a dead motherboard. When I question the tech, he tells me that he swapped all parts and tested them and that the motherboard was dead. That was as well a brand new WS motherboard. Running at around 34 degrees celcius temp for the 8 days very stable without any issues.

> Of course I complained some, looked for the owner to have a discussion. Stumble on Better Business Bureau US and find that others complained there. Mentioned that in the ticket and they terminated my service; keeping of course the rest of my money; Because that too is in their AUP/TOS no refunds

Thus if I get it right, they can randomly choose people that they believe they can easily take. Or simply dislike. It's simple, break their hardware. They will have no choice to ship it back; to then fill their place with another customer because they are low on space. But still bill the first one for the rest remainder of the month, why? Because they can, it's in their well engineered TOS/AUP. So I got to use it from the 26th of last month to today but still will pay until the 26th of this month.

They are allowed to do all of the above, why because they are big now Right!

View 14 Replies View Related

Wrong IP Address Listening To Port 80

Jun 2, 2008

I seem to have a strange problem (I am hoping that if I fix this, it will fix another problem I am having).

For some reason (I most probably did by accident) when I run the command lsof -i tcp:80. The information that comes up says that my IP address xx.xxx.xxx.172 is being used to listen to port 80. Yet the IP address that was asignned to me is xx.xxx.xxx.171. I am wondering how I would go about removing wrong IP address so that the right one is listening to the correct port.

I am running centos OS.

View 4 Replies View Related

Wrong Mail Quota In Cpanel

Jul 7, 2008

i have an e-mail account that in cpanel shows it has 60 of 90 mb of used space... it had some big emails in the trash folder but i deleted em... in fact i deleted everything from the account (sent, trash, drafts, etc) and it keeps showing 60 of 90 mb of used space ive checked if it was spambox... nothing, spamassasin... nothing i even loged on the server and checked the space of mailbox's folder... but it showed only 500 kb... so i assume its a cpanel issue... how can i fix it?

View 5 Replies View Related

Hosting Deal Gone Wrong. On Options.

Mar 6, 2007

I represent a small software development company out of Bellevue, WA. For the longest time we had our server (3U rack) based in Sunny Southern California. We were paying $150/m for 3mbit connection with six IPs. We use the server for work as well as hosting a gaming community. We'd host half-life 2 servers for friends and family for the longest time.

We began to go over our monthly bandwidth allocation limits late last year and had to shell out for the overage charges. Not a big deal. However, a good friend of one of my associates said he could get us free hosting up here in Seattle if we moved our machine.

I was skeptical, but he said he knew someone who was an employee at one of the major datacenters here in Seattle and that she could get us in as long as we hosted her website. We moved our box in November of 2006. It is now March 6, 2007, and we just received word that we've been had. I guess the employee at said datacenter broke some rules and as a result lost privilages to host her own private machine.

So, while she was busy leading us along, we were basically frozen as a small start-up company as our servers were offline and our ability to function without this machine online was greatly hindered.

So, today I was turned onto this website as a place to find answers to questions about hosting. Well, here's my question.

Does anyone know of anywhere in the Pacific Northwest and/or Northern California that provides affordable hosting and quality service? We're looking for rack space for our 3U server and a 3mbit connection. Ideally we'd like more bandwidth than this as 3mbit wasn't enough at our old location... however, considering the amount of loss we've taken during this disaster, we'll settle for anything. We also only need 1 IP, but more wouldn't be a bad thing.

The key word here is affordable. We are starving college kids and hosting is expensive.

We're quite desperate, so any suggestions would be greatly appreciated. Again, we're looking for cheap/affordable hosting sollutions in the Pacific Northwest that meets the above requirements.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved