I created an email account in cpanel. But then when I try to click 'webmail' by that account, it won't work. It takes me to the option screen where I can click Horde Mail or Squirrel Mail. After I click either one of them, it then just takes me to a log in screen like it didn't accept my login info. I try typing in my username and password but it doesnt work.
Is this a permission thing I need to set in WHM? I'm clueless.
My server which runs cPanel (license issued touchsupport) is having problems with handling emails.
I use an external DNS provider (editdns.net) only for this 1 particular domain for handling many Records and such. Through their panel, I have added my mail server's record, i.e. "mailserver.tld".
Now there is a problem with one part of the email issue. I have email piping setup and 1 webmail account setup too. These two work flawlessly. No issues with them. But email forwarding and default address doesn't work.
I am confident that the email settings are working right because, when my clients send an email, piping works and my support system creates a new ticket. But the email forwarding/Default EMail doesn't.
Not just that, I cannot even connect to the webmail account I created via POP3. I 100% sure that I used the correct login credentials and also tried the "+" and ":" for the username part. Just doesn't work. But I can access and read my emails via the Webmail (squirrelmail).
Please help me out with this as soon as possible.
Just got a new additional VPS with WHM/cPanel.
Browse to www.mydomain.com/webmail and get login box > login accepted and taken to Horde/Squirrelmail choice screen > choose Squirrelmail and get login box ... login not accepted! > Retry and choose Horde ... login not accepted!
The login is correct and the results are the same when logging in as root, or through /cPanel or /Webmail.
After migrating from the old ensim to the new "X", everything is working fine, except for the webalizer, I activated webalizer in one domain a few days ago.. and everyday Im trying to see the webalizer information, and it is always displaying this message:
Could not retrieve the requested site report because the Web server logs have not yet been generated. These are generated once a day. Please check again later.
I also tried forcing the log rotating for that site, but the problem still there.
Server is RHES 4 with EnsimPro X, log generation and webalizer is activated for the domain.
I configured monit to send me email alerts when apache is using too many resources but I cannot receive email alerts. I use Qmail.
As for syslog, there is this message:
monit[6473]: Sendmail: error receiving data from the mailserver 'localhost' -- Resource temporarily unavailable
I tried to add for server name the name used in MX record but with the same result.
Btw: other things configured in cron (eg. RKHUNTER) send me alerts OK.
im using centos and a perl script doesnt seem to work on my system.
it gives an error on this line.
use LWP::UserAgent;
$ua = LWP::UserAgent->new;
$ua->agent("MyApp/0.1 ");
BEGIN failed--compilation aborted at line 8.
is it a problem with my perl or is it an error with the script?
I'm on windows vista. I've got an SDSL line into the house with a dedicated IP 62.etc. I've then got a Prestige 791R and all PC's plugged in to that. I've also got a wireless router for my Wii set up.
Basically I've set up this DHCP thingy to start at 192.etc.3 and the Wireless router is at 192.etc.1 and the Prestige is at 192.etc.2 my pc is at 192.etc.9
This is about where my knowledge stops unfortunately.
I have installed apache as the most basic default install I think you can and it seems to be working absolutely fine. I'm assuming I could also install PHP and MySQL etc and wouldn't have too much of a problem, however, my friend cannot seem to access the environment from the WAN IP and when I type in my WAN IP I get the prestige router's control panel.
I read somewhere that I needed to forward port 80, now I can 'open' ports in the prestige control panel but I did try opening port 80 in the control panel and pointing it to my LAN IP (92.etc.9) but it didn't seem to work.
I'm at a bit of a loss so if anyone could point me in the right direction I would be most grateful, just to clarify:
//localhost loads the html file 100%
//192.etc.9 loads the html file 100%
//62.WANIP internally loads my prestige routers control panel
//62.WANIP externally does not load a page (cannot be found)
If you need any more info just let me know and I'll get it.
I have a remote XP PC: 172.16.1.5 OpenVPN connection with route added for 192.168.2.0/24 to go via the VPN
Now on the other end the network consists of:
I have a OpenVPN server inside the lan on 192.168.2.245
Its default gateway is 192.168.2.1
I have 3 Windows Servers, 192.168.2.246, 247 and 248. All gateways are set to 192.168.2.1.
I have a ethernet router on the network, 192.168.2.1, it has a route added for 192.168.0.0/16 to go via 192.168.2.245, and route added for 172.16.0.0/24 to go via 192.168.2.245 also). the 192.168.0.0/16 is incase any other LANs are connected at a later date, if computers saw any packets not on the the 192.168.2.x subnet they would be routed to the default gateway which would then pass them to the OpenVPN router.
The trouble is, i can remotely connect and ping to the OpenVPN router fine and also the ethernet router, however when i ping any of the Windows boxes it times out. But i can open up Remote Desktop and connect to the windows box without problem, infact if i am running 'ping 192.168.2.246 -t' it will suddenly come alive but only after the RDP connection is made.
Is this something funny with the routing? I want to keep the OpenVPN server internal to the network and i appreciate it is hitting the ethernet router then being passed to the OpenVPN but something is weird as it fires up RDP fine but not ping. No firewalls are enabled on any of the boxes. If i log into ssh on the OpenVPN router or ethernet router i can ping from that to the windows boxes fine.
Its as if a ICMP redirect is issued, and all is well after the 1st connection. Not too sure but could anyone be kind enough to enlighten me?
I have having some issues with sending/receiving email. I have the following running on my linux virtual dedicated server with godaddy:
Postfix
IMAP
Squirrelmail(webmail)
My problem is: I can logon through webmail using the domain account but I cannot logon using any email accounts I created. I can also send emails out from the server from the command line i.e.:
root@myserver.com# echo "test" | mail -s testsubject someemail@hotmailorwherever.com
So instead of using webmail, I tried using OUTLOOK and experienced the same issue. I can logon using the domain/system account but not any using any of the email accounts i created using simple control panel.
I'm running Plesk and can't seem to login to my webmail with any of my users I create, anyone had this issue before?
View 14 Replies View RelatedI want to cap users on outbound emails ....
Example: User A sends an email to 100 people (using To,cc and bcc) . However the server needs to stop sending that message and cap a limit of 5 recipients per email
At present, when our customers login to their cPanel and Webmail accounts they goto the following URL's to login
www.theirdomain.com/cpanel
www.theirdomain.com/webmail
I would like to configure it so that they can only login when they visit our corporate website and login via a login box which we will provide on our website, so i need the cpanel and webmail urls to be redirected to a page of our choice on our website.
How would i do this so it takes affect on all our customers accounts.
We are doing this for a marketing reason so that whenever they need to login, they have to visit our website (and see our services more)
When I try to login via webmail horde I get always:
Login failed because your username or password was entered incorrectly.
The logfile shows:
Jul 13 12:23:32 HORDE [error] [imp] FAILED LOGIN for mail@domain.tld [1.2.3.4] to to {127.0.0.1:143 [imap/notls]} [pid 5358 on line 139 of "/usr/share/psa-horde/imp/lib/Auth/imp.php"]Click to expand...
I'm not able to login in webmails with shot names, in Horde, nor in RoundCube.
Ex: webmail.domain.tld
username: user1
I must use the full email address as username
Ex: webmail.domain.tld
username: user1@domain.tld
It seens it not find the server.
In Plesk Panel it works fine.
Does anybody know a painless way to make webmail.mydomain.com go straight to the Squirrel Mail login page, bypassing the www.mydomain.com:2095 page?
Or is there a way to use that page, but go straight to the user's Squirrel Mail page?
I have a problem with my vps Centos + Plesk 11.5, from webmail login not work, I seen this guide:
[URL] ....
but not resolved problem...
I updated two days ago the Plesk panel from the Panel itself and it was succesfully but at webmail URL which it appeared one error about default.inc something but after I did refresh some times it disappeared now it doesn't show anything. I tried removing and reinstalling roundcube but still doesn't work..
Here are my logs from /var/log/plesk-roundcube/errors
[09-Apr-2015 14:50:36 UTC] PHP Warning: finfo_file(/usr/share/psa-roundcube/installer/images/roundcube_logo.png): failed to open stream: No such file or directory in /usr/share/psa-roundcube/program/lib/Roundcube/rcube_mime.php on line$n line 754
I have a freshly installed Plesk 12 on CentOS 7.
FTP logins worked fine yesterday. Today I get a 530 Login incorrect.
I think the only change since yesterday was a server reboot.
/var/log/secure tells me that /etc/ftpusers is missing
Code:
Jun 8 00:33:19 macbook proftpd: PAM unable to dlopen(/usr/lib64/security/pam_stack.so): /usr/lib64/security/pam_stack.so: cannot open shared object file: No such file or directory
Jun 8 00:33:19 macbook proftpd: PAM adding faulty module: /usr/lib64/security/pam_stack.so
Jun 8 00:33:19 macbook proftpd: pam_listfile(proftpd:auth): Couldn't open /etc/ftpusers
What went wrong, what would be the solution?