Apache :: Not Starting After Windows 8.1 Update

Apr 5, 2014

My Apache server not starting after Window 8.1 update.Read some solutions that it might have conflict with skype, i have uninstalled skype still same problem.

Apache Version 2.4.7 (win 32)
Php version 5.5.5

View 5 Replies


ADVERTISEMENT

Apache Not Starting

Dec 2, 2008

I was adding another apache node to the cluster. All the nodes have RHEL5 installed on it. I downloaded the source httpd-2.2.10 and compile it using commands:

./configure --prefix=/usr/local/apache --enable-module=so --enable-rewrite=shared --enable-cgi=shared --enable-unique_id=shared --enable-ssl=shared --enable-include=shared
make
make install

After it is compiled without any errors, when i am trying to start it it's giving me error.
# /usr/local/apache/bin/apachectl start

httpd: Could not open configuration file /usr/local/apache/conf/httpd.conf: Invalid argument

File exists at the said location. There is no permission issue also.
# ll /usr/local/apache/conf/httpd.conf
-rw-r--r-- 1 root root 13482 Dec 2 12:32 /usr/local/apache/conf/httpd.conf

Kindly help in resolving the issue.

View 8 Replies View Related

Apache :: 2.2 Not Starting After Restarting PC

Jul 20, 2013

I can't start the server with my php enabled 5.2.I've the following error reports.

The Apache2.2 service terminated with service-specific error 1 (0x1).

[Reviewed at the event viewer]

[Sat Jul 20 20:25:52 2013] [warn] pid file C:/Program Files/Apache Software Foundation/Apache2.2/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?

[Reviewed the error log file of Apache 2.2]

I resolved this problem earlier by re-installing both php and apache and configuring them all over again.But when i restart my pc ,i get the same error....

View 3 Replies View Related

Starting Apache Failed

Jul 26, 2013

I am installing xampp 1.8.2 for windows. My OS is win7. When installation is successfully done, I tried to start apache. But it says:

12:51:25 [Apache] Attempting to start Apache app...
12:51:26 [Apache] Status change detected: running
12:51:27 [Apache] Status change detected: stopped
12:51:27 [Apache] Error: Apache shutdown unexpectedly.
12:51:27 [Apache] This may be due to a blocked port, missing dependencies,

[Code] ....

The following is the apache error log:

Installing Apache HTTP Server 2.x with
DomainName = example.com
ServerName = www.example.com
ServerAdmin =
ServerPort = 80
ServerSslPort = 443
ServerRoot = c:/Apache24

[Code] .....

View 2 Replies View Related

Plesk 12.x / Windows :: Web Management Service Not Starting

Mar 22, 2015

I am receiving this error for IIS WMS service does any one have the same error?

Could not complete the operation: defpackagemng failed: Unspecified error (Error code 2147483656) at Start service WMSVC

As a result of the above error the service is not starting.my server is 2012 R2 up to date with all the plesk updates

View 2 Replies View Related

XAMPP Is Not Starting Apache Server Anymore

Aug 11, 2009

I installed XAMPP a few weeks ago and had a php website working on my localhost – all worked fine no probs. To do this I had to stop my IIS server as this was also using port:80 which is what XAMPP is set to use as default. Now for some reason when I started IIS again a few days ago to do some asp development work and then stopped it again, the apache server would not start even though I’ve definitely stopped IIS. I have tried uninstalling and re-installing XAMPP, but it still won’t start. I tried running the apache_start.bat from the command line and I got the following error message:

"An attempt was made to access a socket in a way forbidden by its
access permissions": make_sock: unable to listen for connections on address 0.0.0.0:80 no listening sockets available, shutting down
Apache could not be started

If I try and start Apache from the XAMPP control panel it just says Apache:stopped and the message in the bottom window is ERROR: Apache service not started [-1]

I was just wondering if you had come across this problem before? If yes, how did you resolve it? Someone mentioned changing the port, but being a bit new to apache and XAMPP I’m not really sure what would need to change in what config files.

View 4 Replies View Related

Plesk 12.x / Windows :: PHP Missing After 12.0.18 Update On Windows

Aug 11, 2014

Latest Update 12.0.18 Update 12 appears to have removed PHP 5.4 and PHP 5.5 from my dropdown under hosting settings.

The only PHP that is left is PHP 5.3

Yet, the updates and upgrades page still lists PHP 5.4 and PHP 5.5 as installed.

Also PHP is still working on the virtual websites that were previously enabled with either 5.4 or 5.5, but not able to change using the Plesk Panel.

Given that Parallels has broken the Panel in that latest automatic update I'd hope it can be resolved ASAP.

I can't even find any references in the KB about Plesk 12 on Windows regarding PHP versions

I can even give feedback about the broken patch as every feedback channel requires paid support.

View 1 Replies View Related

Windows Update 91233

Dec 31, 2007

I keep having problems updating this patch on one of my servers, all the rest are ok. Anyone experienced the same issue? How do you overcome it

A security issue has been identified that could allow an attacker to compromise your Windows-based system running the Microsoft .NET Framework and gain complete control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.

More information for this update can be found at [url]LinkId=91233

View 5 Replies View Related

Windows 2000 Update

Jan 19, 2007

I keep getting

The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.
For self-help options:

Frequently Asked Questions

Find Solutions

Windows Update Newsgroup
For assisted support options:

Microsoft Online Assisted Support (no-cost for Windows Update issues)

I followed their FAQ and still cant update.I am already using IE 6

View 12 Replies View Related

Apache Do Not Update

Aug 4, 2009

i enable Mbstrings and Soap in easyapache in Cpanel.
after 24 hours i restart my server and some things get eror.

tmp folder become read only.

easy apache give below eror :

Code:
Died at /var/cpanel/perl/easy/Cpanel/Easy/Utils/BackGround.pm line 40.
and all site have eror for tmp and mysql.
i change tmp folder but some eror don't solved.

Code:
Can't create/write to file '/tmp/#sql_1f42_0.MYI' (Errcode: 30) SQL=SELECT m.*, sum(case when p.published=1 then 1 else 0 end) as cnt FROM jos_menu AS m LEFT JOIN jos_menu AS p ON p.parent = m.id WHERE m.menutype='mainmenu' AND m.published='1' AND m.access <= '0' GROUP BY m.id ORDER BY m.parent, m.ordering
Warning: Invalid argument supplied for foreach() in /home/music/public_html/modules/mod_tpmenu/tpmenu/dropdown/menu.php on line 127

Warning: array_key_exists() [function.array-key-exists]: The second argument should be either an array or an object in /home/music/public_html/modules/mod_tpmenu/tpmenu/dropdown/menu.php on line 150

this is mount command :

Code:
/dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw,usrquota)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/sda1 on /boot type ext3 (rw)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
/usr/tmpDSK on /tmp type ext3 (rw,noexec,nosuid,loop=/dev/loop0)
and this is fstabs :

Code:
/dev/VolGroup00/LogVol00 / ext3 defaults,usrquota 1 1
LABEL=/boot /boot ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/VolGroup00/LogVol01 swap swap defaults 0 0
/usr/tmpDSK /tmp ext3 defaults,noauto 0 0

View 14 Replies View Related

Windows Update Punks NICs

Sep 26, 2008

I read WHT quite a bit and I'd rather not weigh in on any provider issues with a 1 post count, so I'll ask a generic question of my own.

Is there any particular reason that Windows Updates seem to periodically cause network inaccessibility? Particularly with our PD-SMI+ boards I notice patch days bring at least 10 boxes down. No known solution other than to leave settings identical, disable, then enable the network adapters.

View 2 Replies View Related

Swsoft's Windows Update Policy..

Jul 8, 2007

I recently got a Windows VPS from 1and1 internet. I tried to run Windows update and Baseline Analyzer (SOP for me)..but neither would work. I learned that it seems to be Sw-Soft that have taken it upon themselves to test and push Windows updates to the hosts. Is this just for the big boys like 1and1? Or is this something Sw-soft does for all hosts?

Just wondering..say what you want about 1and1..I must say my experiences have improved over the last few weeks..and it does seem like they are really trying harder.

View 4 Replies View Related

Plesk 11.x / Windows :: Is It Possible To Have Both PHP Versions (5.2 And 5.3) After Update

Jul 24, 2012

I am using Plesk 10 on a Windows dedicated server.I read on Parallels website that version 11 will upgrade PHP to 5.3.Is it possible to keep PHP 5.2 together with PHP 5.3?

View 1 Replies View Related

Plesk 11.x / Windows :: Update Failed 11.5.30?

Feb 19, 2014

I've tried to upgrade directly via Plesk Panel under Add or Remove Components but I get:

ERR_SSL_PROTOCOL_ERRORClick to expand...

View 2 Replies View Related

Cant Access Apache Update In WHM

Jul 10, 2008

Can't access apache update in WHM I get an http 500 error page.

View 4 Replies View Related

Update Apache And Php In Plesk

Jun 21, 2008

How can I update my apache and php to latest version in PLESK?

I need to install GD and Zend Optimizer too.

View 0 Replies View Related

Apache Update Problems (yum)

Sep 14, 2007

Just started running a new VPS and have tried to update apache through WHM and I get this error :

Checking Update System........Your operating system's rpm update method (yum) was not able to locate the glibc package. This is an indication of an improper setup. You must correct this error before you can proceed.

Someone told me to check out yum so I ran a command that he told me too and got this output :

Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.main(sys.argv[1:])
File "/usr/share/yum-cli/yummain.py", line 94, in main
result, resultmsgs = base.doCommands()
File "/usr/share/yum-cli/cli.py", line 381, in doCommands
return self.yum_cli_commands[self.basecmd].doCommand(self, self.basecmd, self.extcmds)
File "/usr/share/yum-cli/yumcommands.py", line 150, in doCommand
return base.updatePkgs(extcmds)
File "/usr/share/yum-cli/cli.py", line 672, in updatePkgs
self.doRepoSetup()
File "/usr/share/yum-cli/cli.py", line 109, in doRepoSetup
self.doSackSetup(thisrepo=thisrepo)
File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 338, in doSackSetup
self.repos.populateSack(which=repos)
File "/usr/lib/python2.4/site-packages/yum/repos.py", line 200, in populateSack
sack.populate(repo, with, callback, cacheonly)
File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 91, in populate
dobj = repo.cacheHandler.getPrimary(xml, csum)
File "/usr/lib/python2.4/site-packages/yum/sqlitecache.py", line 100, in getPrimary
return self._getbase(location, checksum, 'primary')
File "/usr/lib/python2.4/site-packages/yum/sqlitecache.py", line 93, in _getbase
self.updateSqliteCache(db, parser, checksum, metadatatype)
File "/usr/lib/python2.4/site-packages/yum/sqlitecache.py", line 382, in updateSqliteCache
cur.execute("DELETE FROM "+table+ " where pkgKey in %s" % delpkgs)
File "/usr/lib/python2.4/site-packages/sqlite/main.py", line 244, in execute
self.rs = self.con.db.execute(SQL)
_sqlite.DatabaseError: unable to open database file

Its the database error that worries me, can anyone help me out with how to fix this?

Running WHM 11.2.0 cPanel 11.11.0-S16999

CENTOS Enterprise 5 i686 - WHM X v3.1.0

View 2 Replies View Related

Apache :: How To Update Openssl

Apr 5, 2013

we need to upgrade the openssl modules, we have apache 2.2 installed and openssl version is 1.0.0,apache and openssl are in solaris9 SPARC.

View 4 Replies View Related

Plesk 11.x / Windows :: Wrong Permissions After Update

May 22, 2014

I have a Plesk Panel v11.5.30 installed into a Windows Server 2012. Whenever the panel is updated, the filesystem permissions are modified. Group psacln cannot access to several folders like C:Program files, C:Program files (x86), etc. Plesk users connected via Remote Desktop cannot run programs like Internet Explorer or so. Some web apps use Crystal Reports to build reports, and this doesn't work either.

Why does the upgrade process restrict access to these folders? It is possible to modify default permissions applied after panel upgrades?

View 2 Replies View Related

Plesk 11.x / Windows :: Panel Broken After Update

Feb 17, 2014

Updates ran over the weekend and I can no longer login to the Plesk Panel. I'm getting the following PHP error: Fatal error: Call to undefined function get_gpc() in D:Plesadminhtdocsindex.php on line 3Click to expand...

View 1 Replies View Related

Plesk 12.x / Windows :: Auto Update Failed

Jun 19, 2015

I received the following error regarding an auto update that ran on the server.

Execution failed.
Command: ai.exe
Arguments: Array
(
[0] => --select-product-id
[1] => panel
[2] => --select-release-current
[3] => --upgrade-installed-components
)

Details: ERROR: error during prepare patch panel-12.0.18~patch51...Failed to download the package URL.... The requested URL returned error: 500 Internal Server ErrorNot all packages were installed.Please try installing packages again later. I did verify with a web browser that I can access and download the WMIMSDNSProvider.dll file specified in the update. Is this just due to a timeout and the system retries the update? If so, how can I confirm that patch 51 got applied at some point.

View 1 Replies View Related

Error When Trying To Run Apache Update (cPanel)

Feb 16, 2008

I got a new server online today with a fresh installation of centos and cPanel:

WHM 11.15.0 cPanel 11.18.1-R20683
CENTOS Enterprise 5 i686 on standard - WHM X v3.1.0

I have done the initial setup (ip's nameservers etc..) but when I try and run apache update I get the following:

Premature end of script headers: /usr/local/cpanel/whostmgr/docroot/cgi/easyapache.pl: Please check /usr/local/cpanel/logs/error_log for the exact error.

I look in the log file but it just repeatse the above error and doesnt supply any additional info.

View 14 Replies View Related

POP Server Error After Apache Update

Jul 2, 2007

I run a dedicated server with WHM/cPanel (10.8.0).

I was recently supposed to update the Apache installation to add a module, but instead of clicking "load previous config" I clicked on "start build" by mistake. This brought the installation back to default.

I waited till the build was finished and then added all the modules I could remember having installed earlier. This made Apache not wanting to start. I went back to the default and then recompiled apache over and over again, adding 1 o 2 modules every time. Apache booted up fine, but for some reason my mail is suddenly acting up.

I keep getting the following error on one of my domain in my client:

Code:
Unable to connect to POP server mail.example.com.
Error sending password: -ERR Maildir invalid (no 'cur' directory)
When I click OK, I get:

Code:
Unable to connect to POP server mail.example.com.
Error sending password: Operation now in progress
I have a couple of other accounts in the mail client. None of them are receiving mails, even though I can see that there are new mails present in the mailbox via webmail.

My exim is configured to use mbox as far as I know. So I don't understand why I'm getting an invalid maildir message.

View 2 Replies View Related

Plesk 11.x / Windows :: Cannot Install Parallels Product And Update

Feb 1, 2013

Receive for 2 days following error

"Parallels products install and update"

"Failed to read product information from the file: Can not process products.inf3: Failed to download the package http://autoinstall-win.pp.parallels.com/products.inf3: Could not resolve host: autoinstall-win. pp.parallels.com, no data record of requested type Can not process versions.inf3: Failed to download the package http://autoinstall-win.pp.parallels.com/versions.inf3: Could not resolve host: autoinstall win.pp.parallels.com, no data record of requested type "

[URL] .... is present.

[URL] .... is not found.

View 2 Replies View Related

Plesk 11.x / Windows :: Install And Update Parallels Products?

Jun 30, 2012

In Plesk Control Panel accessing Updates and Upgrades have a error that shows Failed to read product information from the file :

Can't process products.inf3: Failed to download the package http://autoinstall-win.pp.parallels.com/products.inf3: Empty reply from server Can't process versions.inf3: Failed to download the package http://autoinstall-win.pp.parallels.com/versions.inf3: Empty reply from server

View 3 Replies View Related

Plesk 11.x / Windows :: Can Update Mailenable Standard Edition

Sep 19, 2013

I use Windows Plesk v 11.5.30 with Mailenable Standard Edition 7.0 version. In mailenable site i saw a new version of Mailenable standard version (7.5.1). URL...Can i download and update Mailenable version of my Windows PLesk? If i made this change and have problem can i do downgrande later?

View 2 Replies View Related

Plesk 11.x / Windows :: Unable To Login To Panel After The Last 11.5.30 Update

Mar 27, 2014

After updating i'm unable to login to the plesk panel with every user account.

---------------------------------------------------------------------------------------
Url redirect: https://[domain]:8443/sso/api.php?api=/ui

Error: Authentication failed: invalid username or password specified
---------------------------------------------------------------------------------------

The usernames and passwords are correct.

View 1 Replies View Related

Plesk 11.x / Windows :: Update Components Button Grayed Out

May 28, 2014

My ver: 11.5.30 Update #45. on Windows 2008 R2 STD.

I need to apply latest updates for installed components but the Update Components button is grayed out!

View 5 Replies View Related

Plesk 11.x / Windows :: Wordpress And Joomla Update Error

Feb 18, 2013

I have a problem. I am running Plesk 11 with Windows 8. I installed wordpress and joomla. If I want to make one update from joomla 3.0 to 3.0.3 I get the error Internal Server error 500.

In Wordpress I get a error, too: By the update from 3.5 to 3.5.1 i get the error: The directory is write protect or not available.

In WordPress I instert in the wp-config.php following.

define( 'WP_TEMP_DIR', ABSPATH . 'wp-content/' );

Now, does the updates to WordPress and plugins work.

My question is, I am running not only one website with WP. How can I make the settings for all WP instances running on the server? And How can I fix it with the Joomla update?

View 3 Replies View Related

Used Apache Update/some PHP Scripts No Longer Working

Jan 26, 2008

Having some issues here, I used Apache Update to install WHMCS as I didn't have Curl installed. Well had some issues using the username and password as it couldn't connect to the database, my modernbill and phpnuke scripts still work but some other scripts like joomla, some shopping cart software, and other MYSQL scripts are not working.

I've run test scripts to see if I can connect to the database, got the following error with the PHP test script

Warning: mysql_connect() [function.mysql-connect]: Access denied for user 'data_invoice'@'localhost' (using password: YES) in /home/data/public_html/test2.php on line 4
I cannot connect to the database because:Access denied for user 'data_invoice'@'localhost' (using password: YES)

Also attempted it in SSH and getting a similar error that access is denied. Username and password are correct. I believe I upgraded PHP which my guess is what caused this. I've searched the forum for a few solutions and I had the problem in the past which I fixed it, but it's been a while.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved