I am receiving this error for IIS WMS service does any one have the same error?
Could not complete the operation: defpackagemng failed: Unspecified error (Error code 2147483656) at Start service WMSVC
As a result of the above error the service is not starting.my server is 2012 R2 up to date with all the plesk updates
What could I fix by trying to start mysql server, recieve following errors:
plesk interface:
Code:
Failed to restart the "mysql" service.
Cannot start/stop/restart service: Rather than invoking init scripts through /etc/init.d, use the service(8)
utility, e.g. service mysql restart
Since the script you are attempting to invoke has been converted to an
Upstart job, you may also use the stop(8) and then start(8) utilities,
e.g. stop mysql ; start mysql. The restart(8) utility is also available.
start: Job failed to start
from the console:
Code:
sudo service mysql start
start: Job failed to start
Code:
mysql -uadmin -p`cat /etc/psa/.psa.shadow` psa
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
output of plesk_11.5.30_reset_instance_data.log:
[Code] ...
We are currently using Parallel Plesk 11.0 version and there is one requirement from microsoft provider to add the exact same values in SRV Records.
Priority of Service = 100
Weight of Service = 1
but these values are not available in the dropdownlist. attached are the screenshots.
I have a problem at the moment in terms of I have recently implemented WHMSonic to our webserver but when the server reboots or goes down and automagically reboots itself, I have to manually restart the shoutcast service.
I have been trying to read around the documentation behind init.d and rc# and have successfully managed to confuse myself.
What I dont understand is how this runlevel system works.
All I want to do is ensure that shoutcast is running after a reboot.
Is there anyone here using Softlayer for Windows dedicated servers but at the same time using a server management company to manage the same?
I use Platinum Server Management for my Linux server, but they don't do Windows. I'm looking for a Windows server management company who has experience with Windows 2008 Enterprise and MSSQL 2008 Standard.
I found the page listing all of the 3rd party server management companies, but what I want to hear are successful marriages between Softlayer and the management company based on experiences of real users here.
I'm trying to integrate AWS Route 53 DNS service with Plesk 11 but cant get it to work after carefully following the steps in the administrator and developing extensions guides.
View 19 Replies View RelatedHow can I remove " " from properties domain aliases?
---------------
Mail service - Mail service is switched on for the domain. mx1.domain.ru., mx2.domain.ru. is used as the mail server.
---------------
We have just installed the plesk version 12. All the installation completed without errors . then we restarted the server . and when we tried to open the plesk through the desktop shortcut we get the error " HTTP Error 503. The service is unavailable."
We have tried the following links fix HTTP , kb6735 .
Why does we get this error ?
I go to Mail>Mail seetings, select all my OFF domains and click Acticate/Deactivate Services, select Enable from the drop down and click OK, but the mail service stays OFF.
Plesk 12.0.18, Windows Server 2008 R2 SP1.
I have it installed with SmarterMail.
However I have a need to recreate a Service Plan that does not add the domain to SmarterMail.
Like on the Hosting Parameters tab there is an Enable hosting tick box, I need the same type of tick box on the Mail tab.
Is there a way to restart IIS via the Plesk 11.5 service provider panel (windows 2008 server with no root access).
I am trying to setup custom error pages and the documentation says to restart IIS after you make the change. At i dont have root access i currently have to ring Webfusion and ask them to do it
I am doing migration of plesk 11 from one server to another server on both server version is same but after migration I cant find any service plan which is there on old server.how can i copy / migrate service plan from one serer to another server
View 4 Replies View RelatedAfter upgrading from 11.5.30 to 12.0.18, when make backup see next message:
<?xml version="1.0" encoding="utf-8"?>
<execution-result status="error">
<object name="example.com" type="domain">
<message severity="error" id="167b9714-3e33-4863-861d-69c4f559afe6" code="InformationalException">
<description>Unable to dump IP addresses for mail service</description>
[Code] ....
When a reseller create a service plan themselves...is there any way to limit the CPU and memory setting for the application pool to recycle on their own created plan?
View 2 Replies View RelatedMy Apache server not starting after Window 8.1 update.Read some solutions that it might have conflict with skype, i have uninstalled skype still same problem.
Apache Version 2.4.7 (win 32)
Php version 5.5.5
I was trying with the Windows Longhorn on my local testing terminal to try out the new features and having some issues here. I was trying out for the Remote Management;configured the users at the IIS and downloaded the latest build from iis.net.However, I am getting a 404 error when trying to login.
2007-09-10 09:40:41 192.168.0.23 GET /Login.axd loginOnly=1&retrieveUrl=1& 8172 iis7.testdomain.com 192.168.32.12 WebManagementShell|1.0.0.0|2.0.50727.42|System.Windows.Forms.Control 404 4 2
I have a Server with Centos7 + Plesk 12 and in the service configuration say that the Bind service is not installed, from command line i have install named services and make a manual configuration the first domain, but when I return to the service page in plesk... the problem is the same, the Bind Service is not installed; then the problem is when i want create a new hosting i need to go to the ssh to make the DNS configuration...
View 1 Replies View RelatedGot following Problem: Unable to find service node for web service on domain with id = 0
After a Check from [URL] ....
I tried this: [URL] ....
Result:
+--------------------+--------------+---------------------------------------+------------------------------+------------+
| Domains | Service Type | IpAddressesCollections.ipCollectionId | Current value of ipAddressId | Have to be |
+--------------------+--------------+---------------------------------------+------------------------------+------------+
| XXXXXXXXXXXXX.org | mail | 30 | 0 | 1 |
+--------------------+--------------+---------------------------------------+------------------------------+------------+
Resolution:
mysql -uadmin -p`cat /etc/psa/.psa.shadow` -Dpsa -e 'Update IpAddressesCollections SET ipAddressId = 1 WHERE ipCollectionId = 30'
Result: ERROR 1062 (23000) at line 1: Duplicate entry '30-0' for key 'PRIMARY'
Deleted a domain workspace in Parallels Plesk and now I am getting this error when signing into the panel:Looked at the logs and been trying multiple commands (including the bootstrapper repair etc.)I found the full error from the logs:
[13-Jun-2015 16:35:33 UTC] PleskDBException: Unable to find service node for web service on domain with id=6
file: /usr/local/psa/admin/plib/PhDomain.php
line: 1404
code: 0
trace: #0 /usr/local/psa/admin/plib/Smb/Subscription/Domain.php(490): PhDomain->getWebHostingServiceNode()
[code]....
Clean install on openSUSE 13.1
After deleting a domain, we got the following error which rendered the panel useless.
Internal error: Unable to find service node for web service on domain with id=5
Message Unable to find service node for web service on domain with id=5
File PhDomain.php
Line 1402
Type PleskDBException
Go To Previous Page
good remote management solution.
As the Intel vPro chip set looks very nice and has all this, what we need (remote power management, hardware analysis/informations, kvm, etc) we bought one main board with that chip set.
We had now the problem to find a software which has a good support for the Intel vPro chip set. We found and tried:
Intel AMT Developer Kit
LANDesk
Microsoft System Configuration Manager 2007
SyAM Software
The onliest software, which was install able and connect able at the moment, was the Intel AMT Developer Kit. Software like LANDesk and MS SysConfigMgr needs Windows Server Versions with and without Windows Domain. We succeeded (after fixing the requirements of each software) to install everything, but no software is able to connect to the vPro chip. Only the Intel AMT Developer Kit does.
The Intel AMT Developer Kit looks on the first look enough anf powerful. We can power on, off, reset, we see hardware informations, we can enter also the bios over remote console. But as soon as we want to start remotely a cd, for example simple memtest86 image, it doesn't gives any display.
Does someone of you has good experience in this system?
Has someone some suggestions, what software else is existing?
We want to manage linux/unix based and windows as well.
With manage we mean, to install and to maintain.
If here is some company, which can help us, also if it costs some money, we would be glad to get in touch.
i've set up a new Debian 7 server with Plesk 12. After the basic configuration, i've installed nginx via Plesk updater.Now, when restarting the whole server, nginx doesnt start for some reason. Plesk shows it as running, but `service nginx status` shows, that it isnt running. But an `nginx.pid` exists in /var/run, but it's empty.
However, starting it manually via `service nginx start` works fine without any error.I've already tried `update-rc.d nginx remove && update-rc.d nginx defaults` but without any success. I've also tried another init script, but same results.
Centos 7, Plesk 12
Problem:
PHP-FPM support for nginx will not start when attempted in Tools & Settings > Services Management
Check error log:
#tail /var/log/php-fpm/error.log
ERROR: unable to bind listening socket for address '/var/www/vhosts/system/domain.tld/php-fpm.sock': Permission denied (13)
Possible problem:
SELinux may be preventing it. To test this do:
#setenforce 0
Now try and start PHP-FPM support again in Tools & Settings > Services Management
If that now starts you know what the problem is. Go to "Fix" below
If it didnt work, you have a different issue. Turn SELinux back on while you figure it out:
#setenforce 1
Fix:
The following worked for me but i know very little about SELinux - corrections welcome:
## Turn SELinux to permissive
# setenforce 0
## In Plesk panel start PHP-FPM support in Tools & Settings > Services Management
[Code]....
(Plesk version 11.09)
Trying to restrict access to plesk control panel to one IP address (fake 66.67.68.69).
When I add the network 66.67.68.69/255.255.255.254 I recieve the following notification:
Error: The access restriction policy and the list of networks are currently configured the way you will not be able to log in with administrator's rights from your IP address '66.67.68.69'.
Now I would like this to be the ONLY ip address from wich i can log in.
it is possible to run services such as Apache, Mail, MySQL etc on the Management Node.
I have PBAS setup and have registered the PPA server with PBAS, the PPA Management Node is marked as ready to provide, I have added the appropriate attributes to the MN under Service Nodes, however according to PBAS I need to install the ppa_apache package (and probably others), and when I go to install the packages it's trying to install the ppa_agent package which is conflicting with ppa_core.
I just have installed plesk panel and when i get to the "Firewall" tool, then clicked on "Enable Firewall Rules Management", proftpd has stopped working properly.URLs....I have preinstalled the server 2 times, and every time i try to edit the firewall rules, proftpd got broken.
View 10 Replies View RelatedWe are successfully using fail2ban on our server (CentOS 6.6, Plesk 12.0.18), that is, jails running and blocking potential intruders
However, we tried to create a custom jail for the CMS that is being used by most of our clients.
I followed the instructions (Tools & Settings > IP Address Banning (Fail2Ban) > Jails > Manage Filters > Add Filter) and created the filter I wanted, but then it does not appear in the list, even though it displays a message reading that the filter was created successfully. Then, if I try to create a new Jail, the filter is not available from the list.
Looking at the directory /etc/fail2ban/filter.d/ I can find a file that has the same name as the filter I created, with a .local extension (the file name does not contain whitespaces or other special characters)...
i want to stream tv channels on my site with premium members so my question is:
what upload speed i need for streaming
My server is a Windows 2003 Enterprise and it doesn't have Windows Media Service. I can find a place to download it either, the Microsoft site only has one for Windows Server 2008 :/.
View 2 Replies View RelatedCan anyone recommend a good Windows VPS server service?
View 4 Replies View RelatedWhat's best software for check services under windows server and alert when anything work wrong ?
View 7 Replies View Related