I was adding another apache node to the cluster. All the nodes have RHEL5 installed on it. I downloaded the source httpd-2.2.10 and compile it using commands:
./configure --prefix=/usr/local/apache --enable-module=so --enable-rewrite=shared --enable-cgi=shared --enable-unique_id=shared --enable-ssl=shared --enable-include=shared
make
make install
After it is compiled without any errors, when i am trying to start it it's giving me error.
# /usr/local/apache/bin/apachectl start
httpd: Could not open configuration file /usr/local/apache/conf/httpd.conf: Invalid argument
File exists at the said location. There is no permission issue also.
# ll /usr/local/apache/conf/httpd.conf
-rw-r--r-- 1 root root 13482 Dec 2 12:32 /usr/local/apache/conf/httpd.conf
I resolved this problem earlier by re-installing both php and apache and configuring them all over again.But when i restart my pc ,i get the same error....
I am installing xampp 1.8.2 for windows. My OS is win7. When installation is successfully done, I tried to start apache. But it says:
12:51:25 [Apache] Attempting to start Apache app... 12:51:26 [Apache] Status change detected: running 12:51:27 [Apache] Status change detected: stopped 12:51:27 [Apache] Error: Apache shutdown unexpectedly. 12:51:27 [Apache] This may be due to a blocked port, missing dependencies,
My Apache server not starting after Window 8.1 update.Read some solutions that it might have conflict with skype, i have uninstalled skype still same problem.
I installed XAMPP a few weeks ago and had a php website working on my localhost – all worked fine no probs. To do this I had to stop my IIS server as this was also using port:80 which is what XAMPP is set to use as default. Now for some reason when I started IIS again a few days ago to do some asp development work and then stopped it again, the apache server would not start even though I’ve definitely stopped IIS. I have tried uninstalling and re-installing XAMPP, but it still won’t start. I tried running the apache_start.bat from the command line and I got the following error message:
"An attempt was made to access a socket in a way forbidden by its access permissions": make_sock: unable to listen for connections on address 0.0.0.0:80 no listening sockets available, shutting down Apache could not be started
If I try and start Apache from the XAMPP control panel it just says Apache:stopped and the message in the bottom window is ERROR: Apache service not started [-1]
I was just wondering if you had come across this problem before? If yes, how did you resolve it? Someone mentioned changing the port, but being a bit new to apache and XAMPP I’m not really sure what would need to change in what config files.
I have FreeProxy Control center (freeproxy.exe) w w w handcraftedsoftware o r g
The problem is I recently got my Deiticated reformated.. and now every time i run it it says "Run-time error; "9" Subscript out of range, but it ust to work before they reformated it. And when i install it on my home pc or any other pc it works fine...
I dont understand whats wrong or how you fix it...
Other Exe's work fine ive also added it to Exmeptions, This is the only Program i can find that will do run mutiable Proxys off a deicated with mutiable Ips -.-
[root@localhost ~]# service iptables status Firewall is stopped. [root@localhost ~]# service iptables start Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: mangle filter [ OK ] Unloading iptables modules: ^[[A [ OK ] [root@localhost ~]# service iptables status Firewall is stopped.
it said iptables is stop...even I start manually...
I am not sure APF is running correctly because of iptables..
What if i got a really good connection to this house i have in Sweden and bought some servers there, is it a good idea and would it sell? How hard is it to get a good connection, the house is in a fairly populated area of Sweden and i have partners who could help run it and do support 24 hours.
But its just a thought and we would start small. What do you guys think?
I have a wordpress site, and am trying to find someone good and reasonable price to design me a template for the website so I can still use wordpress but have access and control to everything.. I am going to buy a domain as well to hook wordpress up to it so I can edit themes etc.. I was looking at maybe using mmhosting..
Also, I have a forum, but not sure what type of forum I need to be able to arrange it and add and use features don't I can't now, so basically upgrade..
My site, as I said is wordpress but I want it to look like the forums I am using..
I have a dedicated machine with Xen configured... Dom0 stuff runs great.
I have a pre-made image from jailtime.org, with an ubuntu.7-04.img, ubuntu-7-05.xen3.cfg, and ubuntu.swap -- obviously, the actual image, the config file, and the swap file.
Starting it fails:
Code: $ sudo xm create ./ubuntu.7-04.xen3.cfg Using config file "././ubuntu.7-04.xen3.cfg". The config file:
- Are the /boot and /dev/sda1 literal? That is, do they relate to Dom0 names (/boot on the server, and /dev/sda1, my "real" disk), or are they telling the new DomU what to call them?
- I don't want DHCP.... Do I change dhcp to "0" / "false," or do I specify an IP?
I've found a zillion guides out there, and they cover everything about setting up Xen, except for this one part, it seems?
I'm attempting to start my first website. The good thing is I'm not new to computers, or programming (my main experience is with VB/C#). I don't have any web programming under my belt, but if I had to learn a new language I'm sure I would be fine.
The website I have in mind is mysweetcar.com. It's meant to be for the most part a typical web forum. I would also like the option of adding Paypal or some other basic e-commerce services. I already have the domain name registered. Now, obviously, I'm looking for a host.
The huge number of available hosts and hosting plans is pretty overwhelming. In my research so far I've found quite a bit of inconsistency and what seems to be false or misleading information. Almost every "review" site I've visited feels like its been paid off by the web hosts. In general I'm having trouble finding objective and unbiased analysis.
Heres a good example of my general confusion: The web host ixhosting.com offers 2500GB monthly transfer for only $6.45 a month. Yet on another website, hosting.com, the data transfer is only 25GB a month, and the plan costs $17. Can there really be such a huge difference? I also don't see numbers for bandwidth, for example with the 2500GB plan it wont matter if the bandwidth is poor and the site runs very slow. I also don't trust that the web host will be faithful to the transfer rate they give me. Is there a way I can independently verify what my transfer usage really is?
070418 12:16:58 mysqld started 070418 12:16:58 InnoDB: Out of memory in additional memory pool. InnoDB: InnoDB will start allocating memory from the OS. InnoDB: You may get better performance if you configure a bigger InnoDB: value in the MySQL my.cnf file for InnoDB: innodb_additional_mem_pool_size. 070418 12:16:59 InnoDB: Started /usr/libexec/mysqld: ready for connections [root@s198 etc]#
I have hosted alot of websites for the past few years.
I first started off with virtual, then shared, and then dedicated. Then finally I purchased my own set of servers and managed to get them colocated in a server datacenter. This was a very big step for me, as I had to study linux and learn how to setup a server from scratch.
I am ready for the next big step, having my own colocated server system. Therefore, I would rent out a space, setup a connection, and them have everything running.
However networking is an issue, since I don't have any schooling for it. But I am willing to learn.
When setting up a server colocation, in what form does the main internet line come in? What kind of networking hardware do I need to split the incoming connection? I already have a network switch, would that be enough? Or do I need something more?
I am in the process of starting a new web site and I would like to know exactly what I should need to know about webhosting, such as:
1) The best one in terms of Price. 2) The simplest one to deal with (if it so matters) 3) What annual fees should I be looking at? 4) Can performance depend on web hosters? 5) Does country of hosting matter? etc...
I want to start my own web server it will be hosting company for future. I will host to 100-200 domain and web sites as begining. Os will be linux red hat with cpanel.
My system will be;
HP ProLiant DL385 G2 (438816-421 HP DL385G2 2220) Two opteron cpu's Ram 8gb HDD 8x HP 146GB 10K SAS 2.5 Hot Plug Hard Drive Fire wall Cisco Pix 515e
My questions;
What can I do for this server works non stop 7/24 if any problem happen hw or sw base?
How many of same system I have to buy?
For example if I need to buy 2 of them. What kind of setup I need? (Like mirror, load balancing, vps, proxy) or if there are some hw base systems, what is your succes?
I currently have a VPS with cPanel and WHM installed. I created some CRS files via WHM and ordered a Certificate from RapidSSL. However, things went wrong so I would like to know how to delete everything to do with SSL and start from the beginning. This time with the help of a few tutorials.
I've deleted all the SSL Hosts via WHM, however there is still two showing in cPanel and I when I go to delete them there it says:
The key for <url>.com has been deleted. The Key for <url>.com cannot be fully deleted, because it is installed in the system ssl directory! The Certificate Signing Request for <url>.com cannot be fully deleted, because it is installed in the system ssl directory! The Certificate for <url>.com cannot be fully deleted, because it is installed in the system ssl directory!
Also, if I want to secure a billing system that is on a subdomain. E.g. scripts.domain.com do I purchase and create the certificates for domain.com or scripts.domain.com?
I'm starting a youtube clone / streaming video site and I need some info on hosting and bandwidth.
1.) Does anyone have any information, or can provide me with a link to information, about the costs required?
2.) I know bandwidth is the biggest cost. Does anyone know what kind of prices I will be paying per gigabyte? I heard its 5 - 15 cents per gigabyte (and dropping) - is this accurate, and where can i get the best rate while still having a reliable host that can handle a lot of traffic? Is there any kind of a list out there?
3.) Besides bandwith, what other costs are involved - for example, is storage space expensive? Will I need a dedicated server, and how much does this run? Other costs?
I have seen many people who run and maintain their own dedicated/servers, now i am thinking of having one of my own. Ive done some research and know the basics in terms of what to install and the hardware side of things.
If i run it from home on a very good PC how can i allocate bandwidth from people such as "The Planet" etc.. will i be able to pay for what i use only instead of paying a very high lump sum cooperate price, as i will be starting off new and experimenting things.
I would ideally want to run and host game servers. If you think the above wont suffice then what company could i approach in terms of getting me off the floor without having to pay a lot of money before im fully established?
A few months ago i was playing around with ubuntu server and desktop version , i installed it on my external drive.
The external harddrive is Seagate 320 GB , connected via USB 2.0
I tried this about 20 times , every time i could not get it to boot to the harddrive. It would just not show up , i changed the bios settings and everything. It never worked , so i gave up.
Now i want to try again , is there a program i can use to test if my external drive is boot able? I was thinking it was my motherboard causing the problem, but i did set it to boot via USB , i tried every boot device.
I have one main server with various virtual servers installed on it. however I do not succeed in restarting one of the virtual server. i receive javascript errors(see attachment).
I have put all the security settings to low,enable scripts etc. and still it doesn't work.
I finally decided to go with NetDepot! I'd like to record here my experiences, in case anyone interested. I hope that after setup is complete, this thread will be no-news and boring.
So just for the record, I chose this config: AMD Athlon 64 3800 RAM: 1GB HDD: 250GB SATA II + 250GB SATA II (raid 1) OS: Debian Stable (They don't offer it at the web site, but Jordan@gnax was kind to offer it to me -- Control Panel: none Backup: none
I used "whtfreehd" coupon to get the second drive for free. Also, a good thing that actual prices are lower than advertised! (70/mo vs. 75/mo) -- I hope that's not an error.
So at bottom line it costs $266 setup + $70/mo. In a year, this will total to $1,106, which is well within $100/mo budget.
I've paid late on Sunday, and now I'm waiting for the server setup. Let's see how long it will take.
A note to non-U.S. citizens: they seem to have strict policy on which credit cards are accepted. I'm Russian, and my Visa Business was not accepted, so I had to use PayPal.
am running CentOs with whm/cpanel and am whenever i reboot my server all sites that required mysql show erros ( can't connect ) it resolves by manually in the web host manager restarting mysql.
