These few days I keep having error logs for form delivery
Message delivery to the remote domain 'xxx.xxx' failed for the following reason: Unable to deliver the message because the destination address was misconfigured as a mail loop.
Perviously everything was fine , wonder anyone know what could have suddenly cause this issue.
Is there a registry key that can distinguish between Windows 2000 and Windows 2000 server?
In
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionProductName
That key is Windows 2000 for both Win 2k and Win 2k server so if there's anything else that would be GREAT.
How well patched and secure is Windows 2000 and old ASP as it stands today? I am considering using this combo for something and need to know if there is anything I need to be concerned about?
View 4 Replies View RelatedOur windows 2000 NT server will not allow users to login to the FTP unless they are classified as administrators. I have the domain set up with all of the correct permissions (to my knowledge).
1. Access to FTP folders
2. Access to Read under FTP
If there is some permission not set, please let me know.
The users are added to the Domain controller under Active Directory. I saw a post about the same exact problem on another forum, but there was no answer.
I have successfully installed PHP onto my MS Server 2000 platform, and can execute the files without problem.
html files no longer work, but I think this is to be expected? Renaming them .php allows them to work.
However, I am struggling to set a default page - I have gone to 'document' in the IIS settings, and removed all other default pages, and added index.php. This has not worked. I can access xxx.myserver.com/index.php, but it does not show when accessing xxx.myserver.com
I keep getting
The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.
For self-help options:
Frequently Asked Questions
Find Solutions
Windows Update Newsgroup
For assisted support options:
Microsoft Online Assisted Support (no-cost for Windows Update issues)
I followed their FAQ and still cant update.I am already using IE 6
The minimum requirements that I am seeking for is that it must be a Windows 2000 or Windows XP machine with at least 1024 MB of DDR PC3200 RAM and at least a single-core 2 GHz CPU whether it be AMD or Intel (something suitable for a gameserver and webserver combo), 40GB SATA/RAID Harddrive, and a Full Duplex 100 Mbit port with plenty of bandwidth to run a 32-Player 66tic CSS Server.
The price range that I seek is between $60 to $120 per month.
I have a windows 2000 server and I would like to configure two domain names, c.com and bnvsaj.c.com and requests to these domains should be forwarded to 192.168.0.1 and 192.168.0.2. How can I configure like this?
View 1 Replies View Relatedto migrate some Windows 2000 and Window 2003 server from 1 IDC to another. Wonder what is the easiest way to change all the IPs in the IIS?
View 2 Replies View RelatedI have a Windows 2000 Advanced Server where there's a performance issue with some of the .asp pages that retrieve data from Access databases, (I know Access databases aren't ideal for data). These pages will just get stuck/freeze, and then either suddenly spring back to life, or give a script timeout error 0113.
The largest Access database I've seen is 136MB (is that way too large?)
I will probably move some of the large Access databases onto a different server but before I do:
- Are there any tools you can recommend to diagnose exactly what files / databases are causing the problem. I don't think the Win 2000 performance monitor tools even work.
- Can anyone explain more about the technicalities behind this issue. I expect it has something to do with processes, threads, memory, Access drivers being loaded into memory etc etc. Can anyone tell me what they know to put me in the picture better?
I have a Windows 2000 server running Raid 1 software raid. Recently, one hard disk in the mirror crash, I replace another trying to build the mirror. Problem is the existing hard disk has a few bad blocks, even after chkdsk it still failed to rebuild the software raid, error msg was due to bad blocks in the existing hard disk.
View 2 Replies View RelatedJust checking how do I add a Windows Defined service in Windows 2000. I saw some info.
But it seemed to apply to Microsoft Windows 2003 Server as there isn't instsrv or srvany in Windows 2000 server even after I uploaded the Resource Kit Tools. Am I missing something?
Or can someone tell me where to download these for Windows 2000?
I'm running Windows Server 2003.
I have two domains on separate IPs:
test1.com [xxx.xxx.xxx.160]
test2.com [xxx.xxx.xxx.161]
I am running two separate SMTP virtual servers (with different access rules) -- with two separate drop folders.
default SMTP Virtual Server [assigned to 160]
second SMTP VS [assigned to 161]
I want test1.com added to the default SMTP server and test2.com added to the second SMTP server. I have read that I must add these domains via the POP3 service. The problem is that adding domains via POP3 service will always add the domains to the DEFAULT SMTP server. I want test2.com added to the second SMTP server.
Is there a solution to this problem, or am I doing something wrong? Can xmail handle this scenario?
I am not using none of roles and features in windows 2008 but if i wish to use Its SMTP server I have to install IIS. is there any SMTP server or ondemad solution for sending email from J2EE application running on win 2008
View 2 Replies View RelatedI keep having tons of spams in the Drop folder of my Windows SMTP which I enable only for sending out forms. How do you normally stop this? I cant stop the SMTP as it is for forms usage. Relays are already set to my local IPs
View 1 Replies View RelatedI just finished to migrate my Plesk 10.5 to 12 and everything is great now.
I just have a little problem with SMTP authorization.
This option, if i'm not doing something wrong, is located on Mail Settings and especially in the section "Relay options". I ticked "authorization is required" and "SMTP".
But when I try to check it on my email client, I can send emails with or without the the SMTP authorization option on the email client.
I am having some problems with the inbound smtp sockets, we are receiving a constant attack from spammers, and they are taking all the sockets we have open for our users. We have enable SPF, greylisting, inbound control access through authentication, relay access with authentication also. but after some weeks we are on the same situation yet. We have spam assasin also installed as power pack from plesk, and we have add DSN black list from b.barracudacentral.org, bl.mailspike.net and bl.spamcop.net but we still suffer from this problem.
We have also try to increase the socket assigned to 200 and after some minutes they used all again and the CPU change increase up to 25% of the total capacity.
I tried to configure windows live mail for an email account. Domain is hosted on a windows Plesk server. Incoming mail is working but unable to send outgoing mails.
Subject 'xxxxxxxxxxxxxxx'
Server Error: 503
Server Response: 503 This mail server requires authentication when attempting to send to a non-local e-mail address. Please check your mail client settings or contact your administrator to verify that the domain or address is defined for this server.
Server: 'xxxxxxxxx.tld'
Windows Live Mail Error ID: 0x800CCC79
Protocol: SMTP
Port: 25
Secure(SSL): No
I am using SMTP for mail service. Is there any limit for maximum that mail can be sent for a month or day? If limit is der then how much i can send?
View 5 Replies View RelatedPlesk Panel, 11.0.9, #61, Windows 2008 R2 SP1, x64
PROBLEM:
With reports configured to send out to an email address local on the Windows server configured through PLESK, if local relay isn't enabled at 127.0.0.1 on the SmarterMail server, the reports are never delivered.
- server is [domainx].com
- email to receive reports from PLESK is plesk444@[domainx].com
-this email address is able to send and receive internally or externally to and from any client w/ SMTP auth enabled.
If SmarterMail is configured with SMTP Authentication Bypass for 127.0.0.1, we get the scheduled report emails as we should. Without the SMTP Authentication Bypass enabled, none of the clients or administrators get any reports or notifications at all.
QUESTION: How can I configure PLESK Panel 11 itself to use that SMTP Authentication to send those reports out?
--is there a configuration file or registry value I can add or modify?
Am using Windows 2003 server with IIS6.0 and SMTP.I tried to send mail using ASP.net C# code through SMTP service.But my mails are getting queued in C:InetpubmailrootQueue.
What could be the problem??I've done many trouble shooting steps but no luck.I changed the Relay settings.Since I am in a LAN connection, i've tested the relay setting using both the 'localhost'and 'MyDomainIP'but everything in vain.
We are trying to use a configure settings for an external SMTP server within Plesk (Windows 2008 R2 Plesk 12) but are receiving the following error message:
Error: Unable to encode IDN email address 'username': email address is invalid
We are trying to use a username for SMTP authentication as we do not have the option of using an email address with our current SMTP relay provider.
Is there any way around this so that we can use a username rather than an email address?
I'm leasing a single dedicated server and it's over 2 TB of traffic this month. It should be almost 3 TB by the end of this month.
The site is very well optimized (mostly static pages, cache, lighttpd, etc) and I'm guessing it could survive 6-10 TB/month traffic with one server.
Traffic is growing for the third month in a row. Not much, but it's noticeable.
It's the first time I'm over standard 2 TB traffic limit. I'm hosting at Leaseweb and I asked them how much does it cost to upgrade my bandwidth, but haven't heard from them since last Friday.
Where do I get a server with a decent amount of bandwidth and wouldn't have to sell my soul to afford it? The problem is, my budget is quite low (hence all the optimizations on the site - to save money on hardware).
Most of my traffic is from US, so I may have to consider American host.
A customer of ours is looking to use ColdFusion and MS SQL 2000.
Our VPS provider does not provide for ColdFusion or MS SQL so we referred them to another host. This host is unable to properly configure for their needs, and we are standing by the client to assist until everything is working properly.
Can anyone recommend a good host who provides cold fusion / ms sql plans using VPS?
Is this too much to ask and should they be looking at a dedicated server?
I am basically a Mac user and my windows desktop just went kaput. I am looking for a cheap and dirty way to make back-ups of my MS SQL 2000 DB.
Is it possible to run a script that creates a copy of it in MS Access which can later be convereted back into MS SQL?
Is it possible to go from MS SQL to MySQL?
The MS SQL 2000 server is hosted on a shared server and I cannot leave DTS packages on it. I prefer not to go the DTS route as it goes way over my head anyway. I do, by the way, have a dedicated Win 2003 server.
Recently I have noticed at least a couple of SQL 2000 databses hacked in different servers. The hacker inserts a javascript code whose source is [url] file. The code is inserted in all records of some tables especially the tables having html code in the records. We are running SQL 2000 on some unused port and not the default port and also we have firewalls enabled in all the servers. We also have the latest updates and fixes applied in the servers. Can anybody throw some light on this and help me find the cause and solution to prevent this from happening again?
View 14 Replies View RelatedRather than repost everything and cause multiple search engine results, anyone know the answer to this little issue I am having?
View 6 Replies View Relatedto change the external IP address on a Windows SBS 2000 server running Exchange. Is there a wizard to handle changes to the NIC, Exchange, etc, all at once? Or do I have to go into each one and change the settings?
Also, does anyone know of a good guide for doing this that might be posted on the Internet? I looked but could not find anything.
I recently signed up with cartikahosting.com only to find out they do not support SQL server 2005 when I tried to install my application.
Their features and price are excellent so I would like to stay with cartika if possible, is there a way to convert my database to 2000? Or backup the database using sql server scripts?
how do you guys do the maintenance for shared hosting SQL 2000/2005? Do you just let the customers do the maintenance, compacting and optimizing themselves or do you scheduled a task to do that?
Till now I had let my clients do that. But some clients it seemed do not really know much about this. But if we were to compact or optimize all the databases by task scheduling, I am worried that it is something against their privacy.