to change the external IP address on a Windows SBS 2000 server running Exchange. Is there a wizard to handle changes to the NIC, Exchange, etc, all at once? Or do I have to go into each one and change the settings?
Also, does anyone know of a good guide for doing this that might be posted on the Internet? I looked but could not find anything.
Is there a registry key that can distinguish between Windows 2000 and Windows 2000 server?
In
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionProductName
That key is Windows 2000 for both Win 2k and Win 2k server so if there's anything else that would be GREAT.
I'm leasing a single dedicated server and it's over 2 TB of traffic this month. It should be almost 3 TB by the end of this month.
The site is very well optimized (mostly static pages, cache, lighttpd, etc) and I'm guessing it could survive 6-10 TB/month traffic with one server.
Traffic is growing for the third month in a row. Not much, but it's noticeable.
It's the first time I'm over standard 2 TB traffic limit. I'm hosting at Leaseweb and I asked them how much does it cost to upgrade my bandwidth, but haven't heard from them since last Friday.
Where do I get a server with a decent amount of bandwidth and wouldn't have to sell my soul to afford it? The problem is, my budget is quite low (hence all the optimizations on the site - to save money on hardware).
Most of my traffic is from US, so I may have to consider American host.
How well patched and secure is Windows 2000 and old ASP as it stands today? I am considering using this combo for something and need to know if there is anything I need to be concerned about?
View 4 Replies View RelatedA customer of ours is looking to use ColdFusion and MS SQL 2000.
Our VPS provider does not provide for ColdFusion or MS SQL so we referred them to another host. This host is unable to properly configure for their needs, and we are standing by the client to assist until everything is working properly.
Can anyone recommend a good host who provides cold fusion / ms sql plans using VPS?
Is this too much to ask and should they be looking at a dedicated server?
Our windows 2000 NT server will not allow users to login to the FTP unless they are classified as administrators. I have the domain set up with all of the correct permissions (to my knowledge).
1. Access to FTP folders
2. Access to Read under FTP
If there is some permission not set, please let me know.
The users are added to the Domain controller under Active Directory. I saw a post about the same exact problem on another forum, but there was no answer.
I am basically a Mac user and my windows desktop just went kaput. I am looking for a cheap and dirty way to make back-ups of my MS SQL 2000 DB.
Is it possible to run a script that creates a copy of it in MS Access which can later be convereted back into MS SQL?
Is it possible to go from MS SQL to MySQL?
The MS SQL 2000 server is hosted on a shared server and I cannot leave DTS packages on it. I prefer not to go the DTS route as it goes way over my head anyway. I do, by the way, have a dedicated Win 2003 server.
Recently I have noticed at least a couple of SQL 2000 databses hacked in different servers. The hacker inserts a javascript code whose source is [url] file. The code is inserted in all records of some tables especially the tables having html code in the records. We are running SQL 2000 on some unused port and not the default port and also we have firewalls enabled in all the servers. We also have the latest updates and fixes applied in the servers. Can anybody throw some light on this and help me find the cause and solution to prevent this from happening again?
View 14 Replies View RelatedRather than repost everything and cause multiple search engine results, anyone know the answer to this little issue I am having?
View 6 Replies View RelatedThese few days I keep having error logs for form delivery
Message delivery to the remote domain 'xxx.xxx' failed for the following reason: Unable to deliver the message because the destination address was misconfigured as a mail loop.
Perviously everything was fine , wonder anyone know what could have suddenly cause this issue.
I have successfully installed PHP onto my MS Server 2000 platform, and can execute the files without problem.
html files no longer work, but I think this is to be expected? Renaming them .php allows them to work.
However, I am struggling to set a default page - I have gone to 'document' in the IIS settings, and removed all other default pages, and added index.php. This has not worked. I can access xxx.myserver.com/index.php, but it does not show when accessing xxx.myserver.com
I keep getting
The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.
For self-help options:
Frequently Asked Questions
Find Solutions
Windows Update Newsgroup
For assisted support options:
Microsoft Online Assisted Support (no-cost for Windows Update issues)
I followed their FAQ and still cant update.I am already using IE 6
The minimum requirements that I am seeking for is that it must be a Windows 2000 or Windows XP machine with at least 1024 MB of DDR PC3200 RAM and at least a single-core 2 GHz CPU whether it be AMD or Intel (something suitable for a gameserver and webserver combo), 40GB SATA/RAID Harddrive, and a Full Duplex 100 Mbit port with plenty of bandwidth to run a 32-Player 66tic CSS Server.
The price range that I seek is between $60 to $120 per month.
I recently signed up with cartikahosting.com only to find out they do not support SQL server 2005 when I tried to install my application.
Their features and price are excellent so I would like to stay with cartika if possible, is there a way to convert my database to 2000? Or backup the database using sql server scripts?
I have a windows 2000 server and I would like to configure two domain names, c.com and bnvsaj.c.com and requests to these domains should be forwarded to 192.168.0.1 and 192.168.0.2. How can I configure like this?
View 1 Replies View Relatedhow do you guys do the maintenance for shared hosting SQL 2000/2005? Do you just let the customers do the maintenance, compacting and optimizing themselves or do you scheduled a task to do that?
Till now I had let my clients do that. But some clients it seemed do not really know much about this. But if we were to compact or optimize all the databases by task scheduling, I am worried that it is something against their privacy.
Would anyone have an idea how much resources it would take to seed 1000 - 2000 torrents ?
The bandwidth is not the problem, i am mostly concerned with what kind of box i should get. should i concentrate more on ram or more on cpu or do i need both?
to migrate some Windows 2000 and Window 2003 server from 1 IDC to another. Wonder what is the easiest way to change all the IPs in the IIS?
View 2 Replies View RelatedCan I upgrade MS SQL 2000 Standard Edition to SQL 2005 Express Edition? I know I can upgrade to SQL 2005 Standard as well as Enterprise Editions, but I want to know if I can also upgrade to the SQL 2005 Express Edition.
View 0 Replies View RelatedI have a Windows 2000 Advanced Server where there's a performance issue with some of the .asp pages that retrieve data from Access databases, (I know Access databases aren't ideal for data). These pages will just get stuck/freeze, and then either suddenly spring back to life, or give a script timeout error 0113.
The largest Access database I've seen is 136MB (is that way too large?)
I will probably move some of the large Access databases onto a different server but before I do:
- Are there any tools you can recommend to diagnose exactly what files / databases are causing the problem. I don't think the Win 2000 performance monitor tools even work.
- Can anyone explain more about the technicalities behind this issue. I expect it has something to do with processes, threads, memory, Access drivers being loaded into memory etc etc. Can anyone tell me what they know to put me in the picture better?
I have a Windows 2000 server running Raid 1 software raid. Recently, one hard disk in the mirror crash, I replace another trying to build the mirror. Problem is the existing hard disk has a few bad blocks, even after chkdsk it still failed to rebuild the software raid, error msg was due to bad blocks in the existing hard disk.
View 2 Replies View RelatedWe are facing a very problematic situation since last several months due to accessive bandwith usage. But we are sure this is only local traffic.
We have 2 Servers with our hosting provider
Server A - this is a VPS
all our webfiles/domains/dns/nameservers reside on this server
Server B - this is a dedicated server
contains only databases
(we are actively running vbulletin based forums on this servers)
Since last several months we are facing huge bandwith increase since we have transferred only our databases to Server B. (earlier database + everything was on Server A) We never ever consumed even 50% of the entire allocated bandwith in past when we were on Server A.
But only after moving the database from Server A to Server B we have found this tremendous increase,
Can we do something about same ? as both the servers belong to same hosting provider.
We are not sure but expect that this is only local network traffic between 2 servers.
We are facing a very problematic situation since last several months due to accessive bandwith usage. But we are sure this is only local traffic.
We have 2 Servers with our hosting provider
Server A - this is a VPS
all our webfiles/domains/dns/nameservers reside on this server
Server B - this is a dedicated server
contains only databases
(we are actively running vbulletin based forums on this servers)
Since last several months we are facing huge bandwith increase since we have transferred only our databases to Server B. (earlier database + everything was on Server A) We never ever consumed even 50% of the entire allocated bandwith in past when we were on Server A.
But only after moving the database from Server A to Server B we have found this tremendous increase,
Can we do something about same ? as both the servers belong to same hosting provider.
We are not sure but expect that this is only local network traffic between 2 servers.
We have running exim mail service in cpanel web server. Exim consumed some CPU% memory and lots of threads are opening. More than 2000 mails in queue everyday. How can we optimize the exim mail service?
top - 06:33:12 up 23:12, 1 user, load average: 0.03, 0.08, 0.08
PID USER PR NI %CPU TIME+ %MEM VIRT RES SHR S COMMAND
4777 mailnull 15 0 1 0:00.02 0.2 9324 3936 2680 S exim
1809 mailnull 16 0 0 0:00.09 0.1 8192 1156 808 S exim
1815 mailnull 24 0 0 0:00.00 0.1 8428 1100 764 S exim
4779 mailnull 16 0 0 0:00.00 0.0 8200 684 336 S exim
Just checking how do I add a Windows Defined service in Windows 2000. I saw some info.
But it seemed to apply to Microsoft Windows 2003 Server as there isn't instsrv or srvany in Windows 2000 server even after I uploaded the Resource Kit Tools. Am I missing something?
Or can someone tell me where to download these for Windows 2000?
I have a client on a dedicated IP, today we needed to downgrade the web hosting plan. As the web hosting plan puts users on a default shared IP, this plan change also changed the dedicated IP to the shared one causing some propagation issues for a small period of time.
I have contacted WHMCS about this asking if they had a way of changing the clients plan but keeping the IP address intact as this could lead to some very undesirable outcomes. They explained that it is not their fault and to contact Parallels.
I know I can change the plan directly in Plesk however by initiating the plan change via WHMCS, everything is automated.
Has anyone helped clients transition from one domain to another? Maybe dissolving a partnership or renaming their company... so a new domain name has been registered and a new website created.
2 Issues:
#1 Using .htaccess 301 redirect
We used the following command line in their old website's htaccess file
Redirect 301 / [url]
The goal was to get people try to visit any page of their old website (i.e. OldWebsite.com/contact.html) redirected to their new website (i.e. NewWebsite.com/contact.html). Isn't that supposed to change the address bar's URL, too? For some reason, I visit their old site and I seem to be redirected to their new website but the address bar still has their old domain name? Something is going on???
#2 Having their new company name for 2 years now. People can enter her new company name in Google, MSN or Yahoo. Her new company name appears in the search results but has the old domain name associated with it. We are trying to get rid of any reference to that old domain name? What's the easiest way to do this? So what people see in search engines is:
New Company
Short Meta Description
www.OldDomain.com
What steps did I miss in this transition?
What steps do I have to take on their old website/old web server to control it's appearance on search engines and make sure people get to the new website?
One of my customer using google apps for his domain. He also fetch external emails using google mail solution.
Problem is all of his email accounts email fetched but his ISP email give error.
I check and found if he didn't use that ISP, Outlook also not check email and give error. Only he can check email when he logon on net with that ISP.
on webmail he can check using ISP site. Any other webmail services provider like mail2web.com not able to check emails.
Can any one recommend how I can bypass their ISP restriction security.
I have reach another decision. I never considered an external firewall for my server. It sounds like this would be beneficial to me to protect my interest.
Are all external firewalls the same?
What recommendations do you have for one, like name and where I can get one?
I am an IT manager at a small company. Currently we host an ASP.net based web application (on an IIS server) that we do most of our business on. It was grown in house and uses our MS SQL server. We are looking at expanding this application within the next few months, and I need it to be "bulletproof", as in almost zero downtime.
The website also references and pulls up scanned documents that we have on a NAS server. Currently it is around 300 gig worth of documents, but expanding around 200 gig a year.
Ultimately, I would like this to be hosted someplace where there is a constant backup of the SQL and website. And someplace I don't have to worry about the hardware, because I am a one man operation and don't have all the needed experience to deal with the web application.
would it be beneficial for me to host the scanned documents onsite, and have a hosted solution reference them back at our HQ? I could put them in a DMZ or something like that.
I want to install Linux Ubuntu onto it, the thing is i dont know how to boot to it, there a partition one with XP backup files and one with Linux files I need it to boot from the Linux one so i can install it onto the HDD... but I dont know how I go into the BIOS and change Removable to top but it says it cant find anything...
View 0 Replies View Related