I have just setup a .org website and when I point a browser to it, it only seems to load if I leave the www out in front of the name. Why would this be? What did I forget? The domain name is bsa272.org if that helps anybody.
Whenever I have had a server with WHM/cPanel I have always been able to raise WHM by browsing to www.mydomain.com/whm - however on my latest server this doesn't work, I can only get to WHM by browsing to my IP:2086
The server has been up and running for 6 days and www.mydomain.com has been working almost from the beginning.
dnsreport shows that reverse dns exists for hostname.mydomain.com
I am at a loss to know why I cannot raise WHM by www.mydomain.com/whm
I just sign up godaddy email account premium plan, what i get is 100email accounts and 2gb of total. I also purchased a domain name.
My questions:
1. I think 2gb for 100 email accounts are too small for me, is there anyway to upgrade to bigger storage? or i have to purchase web hosting so that my email storage will get bigger?
2. I try to follow all the instructions provided by godaddy for the microsoft outlook setting of email. I cannot successful receive email, the problem is from the incoming mail server. Godaddy website asked us to fill in with mail.(Domainname).com, so i fill in with the domain name which i just purchased and it doesn't work, just keep pop out and ask me to put in username and password.
my nameserver are messed up ns1.32view.com works but ns2.32view.com doesnt everything seems to be done rite they both have their own ip both ips work correctly setup at godaddy aswell anyone got any ideas?
I am simply wanting to map on mydomain.com to anotherdomain.com. So i setup a CNAME on mydomain.com. Once propagated mydomain is not being picked up and is defaulting to the cpanel successfully installed screen.
I have tried this on another of our servers and this does work.
So my question is: can you use a CNAME to map mydomain.com to anotherdomain.com without having to add the mydomain.com to the apache VirtualHost ServerAlias?
It does seem like you can as i have this working on one server - is there an apache setting somewhere to block this?
The hostname (server.mydomain.com) resolves to . It should resolve to 209.40.xxx.xxx. Please be sure to correct /etc/hosts as well as the 'A' entry in zone file for the domain.
Some are all of these problems can be caused by /etc/resolv.conf being setup incorrectly. Please check this file if you believe everything else is correct.
You may be able to automaticly correct this problem by using the ' Add an A entry for your hostname ' under ' Dns Functions ' in your Web Host Manager
Is there a way to prevent accessing the website using the domain.com/~username/
Currently on most (all?) cpanel hosting plans it's possible to access the site via [rl].
Maybe there is something to prevent that as it could cause very serious duplicate content issues.
Moreover, I think it's a global bug that affects millions of hosting accounts. Yahoo, for example, many times indexes wrong URLs because of that... In many situations, if I knew your cpanel username, I could link to it instead of your domain to remove your site from search engines..
After successfully installing postfix+dovecot on Debian, I've run into a problem using Thunderbird email client on my home pc to receive email. I get: "Security Error: Domain Name Mismatch"
How, then, do to I generate a certificate for mail.mydomain.com?
Before installing postfix+dovecot, I created an MX record for mail.mydomain.com, and an A record for mail.mydomain.com. Should I have also added mail.mydomain.com to /etc/hosts?
When setting up Thunderbird, I told it my Pop Server was mail.mydomain.com. When I attempted to Get Mail, then I got "Security Error: Domain Name Mismatch".
I have a blog (hindigo.net) registered and hosted through mydomain.com (Standard Windows Package). For the past days, it has been unaccessible most of the time (either keeps trying to load without success, or loads a blank page).
When accessing the site structure through FTP, all files are fine, and I can access the control panel without any problem.
I tried to get some info on possible server updates from the support, but their answers are not very informative:
- either a server update;
- or the site is working fine (it was indeed yesterday late, as I am in Asian time zone);
- or they ask to put DNS to NSx.MYDOMAIN.COM, while the hosting solution automatically puts NSx.MYDOMAINWEBHOST.COM
Am I the only one facing issues this past days with MyDomain.com, or is this general?
I am in the process of switching to another provider (Infomaniak.ch) anyway, but if this is a personal situation only (e.g. site attack?)
I setup my cron job run daily and it automatically sends email to root@server.mydomain.com after it done. How do i setup forward email from root@server.mydomain.com to my gmail or other external email provider ? That means every time if root@server.mydomain.com receive email than my other maail will get that email too.
I just wanted to post a quick review... I until recently had all my sites on HostGator... a fine host but not a performance host. I did my research and ended up trying MediaLayer! All I can say is WOW... I've been developing a Drupal based site for some time now and it was sluggish on HostGator to say the least. After the move to MediaLayer it screams! I wasnât expecting this extreme of a performance difference but it really did improve... And not just a little... If anyone is looking for speed... Do yourself a favor a give MediaLayer a shot... It's that good
I don't know if you've already experienced this but I really want a server from Kimsufi (from OVH) but I can't go trough their confirmation step where they need to send me a SMS with an activation code. I'm from Canada and althought the support told me it should work I have never received their SMS (and even tried my friends' cellphone numbers) The support also said that I could choose the "skip verification" step and go trought the process, but when I try this, the process goes back to the SMS verification step with an error message telling me I didn't enter the right code (Since I entered nothing of course)
Has anybody ever had any problem like this? I have a friend who's from France and he said it was lightning fast, so I'm wondering if my only option is to find someone who will activate my account for me in Europe.
Well I ordered a nocster server about 12 hours ago, received the billing authorisation form (im a new client) and completed that scanned it along with id and utility statement and emailed it back to the auth address etc.
I'm yet to receive an email or anything accepting it and im just a little concerned that it didnt get through due to being a large email with attachements etc.
So my question is...how long does it usually take for billing to approve you and do they send you an email stating as such?? Also how long till server delivery on average?
I know that actual server delivery can take up to 5 days etc, im just interested on the average.
The onboard NICs on one our machines have become faulty, but due to their being no spare card slots on the server - a USB NIC has been used as a replacement.
This was fine, until the machine had to be reset - and on reboot MS SQL and Merak both failed - the reason being they load up *before* the USB driver kicks in for the nic (MS SQL for example tries to start, cannot listen on the IP then fails - Merak loads up, but doesn't bind -- even after the card comes up).
So my question is, is there a way to make the USB drivers load up first, or somehow put a delay on MS SQL and Merak?
MYSQL doesn't seem to be affected .... but that could just be fluke...
Some of our clients have alot of webspaces (resellers that migrated from Expand) and having to order the list of webspaces each time they want to move to another domain is causing them some hassle. Is there a way to set the webspaces to order by name by default?
I am posting this to tell my experience with UKeasily. I ordered a dedicated server from UKeasily on 8th March.
I did a research on WHT and chatted with their live help. Everything seems great. A tracert to their test IP also shows their server in good location and returned good net stats for me.
However, everything changed after I putting down my orders and paid the money. 8th March is a saturday and I do not expect them to act on week end. I phoned them on monday 10th March and got firm words from them that my order was received and the server will be ready in 48 hours. I was happy to hear it.
Then the bad news come. The dedicated server is not ready on 13th March. I waited for another day to call UKeasily. But only to find out that the UKeasily's telephone numbers are either no longer in use or go to answering machine. UKeasily's live chat has been offline for 5 days. Messages left out on their support system was not answered.
I did receive an email from google checkout telling me that UKeasily informed them the server order was shipped. I myself then checked my email box but found nothing. Called UKeasily again, still the answering machine.
I am running dedicated servers on UK2, OVH and Godaddy. Those companies may have slower server installation time but with good level of support. The level of service received from UKeasily is disappointing.
Beware if you were about to buy from UKeasily as of now. A server company that has the live chat offline for more than 5 consecutuve days and not answering even sales calls may not provide enough technical support while you need it. If you check their website, their live chat is still offline and sales number still goes to answering machine.
Does the iptables service need to be running in order for APF to function? If so, can APF act like it is running, when the iptables service is not running, thus giving you a false sense of security?
I have vhost setup for test of a new website. I want to allow access on the localhost, and, from one IP from the Internet (redacted). Apache serves the site just fine on the server but I can't access the site from my the "xxx...." IP.
I'm using a physical path to test from the public IP as follows:
I have vhost setup for test of a new website. I want to allow access on the localhost, and, from one IP from the Internet (redacted). Apache serves the site just fine on the server but I can't access the site from my the "xxx...." IP.
I'm using a physical path to test from the public IP as follows:
Code: <VirtualHost *:80> ServerName test ServerAlias test DocumentRoot /home/user/public_html/test <IfModule mod_fcgid.c>
[Code] .....
I don't have a FQDN as yet, so I just made a entry in /etc/hosts as follows:
Code: 127.0.0.1 test
Here is an excerpt from the Apache error log:
Quote: [Mon Jun 17 12:02:16 2013] [error] [client xxx.xxx.xxx.xxx] client denied by server configuration: /home/user/public_html/test/index.html
I've checked the firewall and the /etc/hosts.allow- that's not it. I've read the Apache docs and in the vhost block Allow should be evaluated last, and apparently is matching localhost but is not matching my IP.
2008-04-06 08:52:32.597ERRORApache Binary Path must be set properly in order replace Apache, fall back to 'Reload on configuration file change'. 2008-04-06 08:52:32.602WARN[configerver:listener] No listener is available for normal virtual host! 2008-04-06 08:52:32.604ERROR[config:template:centralConfigLog] Listener [Default] does not exist 2008-04-06 08:52:32.605ERROR[config:templateHP_SuEXEC] Listener [Default] does not exist 2008-04-06 08:52:32.605ERROR[config:template:EasyRailsWithSuEXEC] Listener [Default] does not exist 2008-04-06 08:52:32.617WARNStandard Edition only support up to 5 Apache vhosts.
I did everything on the litespeed setup I was soppose to found at their wiki site. But still I recieve these errors, LiteSpeed works on my server because httpd is disabled and LiteSpeed is responding to request now.