The onboard NICs on one our machines have become faulty, but due to their being no spare card slots on the server - a USB NIC has been used as a replacement.
This was fine, until the machine had to be reset - and on reboot MS SQL and Merak both failed - the reason being they load up *before* the USB driver kicks in for the nic (MS SQL for example tries to start, cannot listen on the IP then fails - Merak loads up, but doesn't bind -- even after the card comes up).
So my question is, is there a way to make the USB drivers load up first, or somehow put a delay on MS SQL and Merak?
MYSQL doesn't seem to be affected .... but that could just be fluke...
Goggle has failed me most miserably on this..I find I need to do some serious load testing and user traffic simulation. Free software..I find..but it is almost all java-based..which..is not doable easily from a small vps. Uncle Bill has a windows based tool..but that requires a windows-based vps..and those are not cheap nor plentiful.
Ok..two directions this could go:
Linux based do-it-yourself testing and user/load simulation software
*or*
A hosted solution (with a free trial hopefully)
I had used mecury's loadrunner many moons ago..but now that hp has bought it...it seems to now be you-must-have-your-own-server solution now..and not a hosted one.
I work for an academic department which utilizes one web server, and has few issues with processing time and/or speed during the year. However, there is one point during the year when there is a need for a significant number of processing transactions, which opens all at once at a certain time on a certain day for everyone, that the web server cannot handle and is currently not occurring.
I need to find a service that can handle this. Basically, we would just need to insert info into a database (or whatever input form works) and then later export that data into a text file to be inserted by us at a later time. This is not credit card processing, which is why I'm posting. However, this would need to be secure. We only need the use of the servers and a database.
im trying to setupa Windows Meida Services Server Locally but i am stuck with one thing, im wanting to have to enter a username and password to send content to the server (push publishing point being run from sam broadcaster) but i cannot for the life of me figure out how to make WMS require a username and password for a broadcast encoder to connect but to allow anyone to listen without user/pass. so im wondering if anyone can provide me some info on this
I just took my first steps into Windows Media Services but I have some problems with the buffering of the stream.
I send from Expression Encoder 2 SP1 to my publishing point on my Windows Media Server.
But when the quality of the video is too high, I get some buffering problems when I'm watching the streamed video with my Windows Media Player. After looking 5 seconds to the stream, the windows media player stops with playing and in the left bottom corner I see the text "buffering". After 3 seconds buffering, the player goes further for a next of 5 seconds of playing and it continously does this.
Just checking how do I add a Windows Defined service in Windows 2000. I saw some info.
But it seemed to apply to Microsoft Windows 2003 Server as there isn't instsrv or srvany in Windows 2000 server even after I uploaded the Resource Kit Tools. Am I missing something?
Or can someone tell me where to download these for Windows 2000?
When I attempt to go to Tools & Settings > External Services > View Services I am redirected to [URL] .... where the page attempts to load for around 2-3 minutes at which point I receive the error :
"Error: Error validating license."
I have checked the logs and event viewer but see no warnings or errors related to the issue. As far as I can tell it is a problem on Plesks side as it seems that the handoff from my panel is already done.
I don't know if you've already experienced this but I really want a server from Kimsufi (from OVH) but I can't go trough their confirmation step where they need to send me a SMS with an activation code. I'm from Canada and althought the support told me it should work I have never received their SMS (and even tried my friends' cellphone numbers) The support also said that I could choose the "skip verification" step and go trought the process, but when I try this, the process goes back to the SMS verification step with an error message telling me I didn't enter the right code (Since I entered nothing of course)
Has anybody ever had any problem like this? I have a friend who's from France and he said it was lightning fast, so I'm wondering if my only option is to find someone who will activate my account for me in Europe.
2) Open Internet Information Services (IIS) Manager > Right Click On "Web Sites" select properties > Click Service Tab > Open HTTP Compression > Select Compress Application Files and Compress Static Files
3) Use eAccelerator (PHP accelerator, optimizer, and dynamic content cache) with This options;
4) Don't load this extensions, extension=php_mbstring.dll extension=php_domxml.dll extension=php_xslt.dll
Only use this Extensions in php.ini extension=php_sqlite.dll extension=php_curl.dll extension=php_gd2.dll extension=php_gettext.dll extension=php_iconv.dll extension=php_imap.dll extension=php_mssql.dll extension=php_sockets.dll extension="eaccelerator.dll" upload_tmp_dir= "C:WINDOWSTemp"
This Settings tested on Windows Server 2003 SP2 IIS6 with PHP v4.4.7
I have a new WP installation but when i access the site the css and images wont load. Check in the browser console an it shows - Failed to load resource: the server responded with a status of 500 (Internal Server Error). So i think it would be a file permission issue. I'd check in ftp their file permission and it shows XXX. Tried to change it to 644 for files and 755 for folders but no luck. Tried to change it via file manager still the same. I'm thinking this is causing the problem or some other else.
I am looking for a Windows VPS, preferably inexpensive, but the primary goal is to have a fast pipe to it and be capable of running the WAPT windows load testing tool [url]
I currently have a Zone VPS, and have looked using http_load, or siege from it, but they don't appear to be anywhere near as full featured ad WAPT.
I need to run the tests against both a corportate website to see what our current capacity is, and want to make sure I am not bandwidth limited, as would be the case if I was testing via a T1 or DSL connection, hence the reason for wanting a Windows VPS on a thick pipe that I can run the tests on.
Well I ordered a nocster server about 12 hours ago, received the billing authorisation form (im a new client) and completed that scanned it along with id and utility statement and emailed it back to the auth address etc.
I'm yet to receive an email or anything accepting it and im just a little concerned that it didnt get through due to being a large email with attachements etc.
So my question is...how long does it usually take for billing to approve you and do they send you an email stating as such?? Also how long till server delivery on average?
I know that actual server delivery can take up to 5 days etc, im just interested on the average.
Some of our clients have alot of webspaces (resellers that migrated from Expand) and having to order the list of webspaces each time they want to move to another domain is causing them some hassle. Is there a way to set the webspaces to order by name by default?
I am posting this to tell my experience with UKeasily. I ordered a dedicated server from UKeasily on 8th March.
I did a research on WHT and chatted with their live help. Everything seems great. A tracert to their test IP also shows their server in good location and returned good net stats for me.
However, everything changed after I putting down my orders and paid the money. 8th March is a saturday and I do not expect them to act on week end. I phoned them on monday 10th March and got firm words from them that my order was received and the server will be ready in 48 hours. I was happy to hear it.
Then the bad news come. The dedicated server is not ready on 13th March. I waited for another day to call UKeasily. But only to find out that the UKeasily's telephone numbers are either no longer in use or go to answering machine. UKeasily's live chat has been offline for 5 days. Messages left out on their support system was not answered.
I did receive an email from google checkout telling me that UKeasily informed them the server order was shipped. I myself then checked my email box but found nothing. Called UKeasily again, still the answering machine.
I am running dedicated servers on UK2, OVH and Godaddy. Those companies may have slower server installation time but with good level of support. The level of service received from UKeasily is disappointing.
Beware if you were about to buy from UKeasily as of now. A server company that has the live chat offline for more than 5 consecutuve days and not answering even sales calls may not provide enough technical support while you need it. If you check their website, their live chat is still offline and sales number still goes to answering machine.
Does the iptables service need to be running in order for APF to function? If so, can APF act like it is running, when the iptables service is not running, thus giving you a false sense of security?
I have vhost setup for test of a new website. I want to allow access on the localhost, and, from one IP from the Internet (redacted). Apache serves the site just fine on the server but I can't access the site from my the "xxx...." IP.
I'm using a physical path to test from the public IP as follows:
I have vhost setup for test of a new website. I want to allow access on the localhost, and, from one IP from the Internet (redacted). Apache serves the site just fine on the server but I can't access the site from my the "xxx...." IP.
I'm using a physical path to test from the public IP as follows:
Code: <VirtualHost *:80> ServerName test ServerAlias test DocumentRoot /home/user/public_html/test <IfModule mod_fcgid.c>
[Code] .....
I don't have a FQDN as yet, so I just made a entry in /etc/hosts as follows:
Code: 127.0.0.1 test
Here is an excerpt from the Apache error log:
Quote: [Mon Jun 17 12:02:16 2013] [error] [client xxx.xxx.xxx.xxx] client denied by server configuration: /home/user/public_html/test/index.html
I've checked the firewall and the /etc/hosts.allow- that's not it. I've read the Apache docs and in the vhost block Allow should be evaluated last, and apparently is matching localhost but is not matching my IP.
2008-04-06 08:52:32.597ERRORApache Binary Path must be set properly in order replace Apache, fall back to 'Reload on configuration file change'. 2008-04-06 08:52:32.602WARN[configerver:listener] No listener is available for normal virtual host! 2008-04-06 08:52:32.604ERROR[config:template:centralConfigLog] Listener [Default] does not exist 2008-04-06 08:52:32.605ERROR[config:templateHP_SuEXEC] Listener [Default] does not exist 2008-04-06 08:52:32.605ERROR[config:template:EasyRailsWithSuEXEC] Listener [Default] does not exist 2008-04-06 08:52:32.617WARNStandard Edition only support up to 5 Apache vhosts.
I did everything on the litespeed setup I was soppose to found at their wiki site. But still I recieve these errors, LiteSpeed works on my server because httpd is disabled and LiteSpeed is responding to request now.
