Does the iptables service need to be running in order for APF to function? If so, can APF act like it is running, when the iptables service is not running, thus giving you a false sense of security?
View 14 RepliesWhen I click Start Firewall
I get this
iptables LKM ip_tables missing so this firewall cannot function unless you enable MONOLITHIC_KERNEL in /etc/csf/csf.conf
Error: aborted, at line 156
If APF is running, but iptables is not. Will it then even work if it's not in monolythic kernel?
When i check the iptables status, i see: # service iptables status
Firewall is stopped.
Someone is assisting me with security installs on my server, and he told me it's is normal? I thought APF is an iptables based script, so iptables must be enabled?
I'm in the process of installing PPA on infrastructure running Parallels Cloud Server. Each container has 2 interfaces, one public facing and a private interface for inter-server communication.
No problems installing PPA 11.5 (specifying IP's on commandline) or adding service nodes however, the firewall rules the documentation speaks of are nowhere to be seen? i.e.:
Important: After the installation, PPA creates the special firewall chain PPA-SN-Rules-INPUT used for communication with service nodes. Do not change it, otherwise, you will not be able to add service nodes to PPA.Click to expand...
Has this been dropped from PPA 11.5 ? (I recall seeing the firewall settings in 11.1) There is also no sign of the ppa.firewall tool that is also mentioned.
The only rule I see inserted is for Postgres on the management node, and 2 for pleskd on all of the nodes (open to world!).
I am thinking of running a vpn service for a limited number of my clients, so that they can surf the web securely and anonymously through our VPS (routing all traffics through a vps). However I have no idea what features should I looking for, I mean how much BW or ram does it need.
Lets say I have 10~20 clients at all, Is a VPS with 300G monthly BW and 256(or 512)M of ram enough to have it work smoothly?
I want to run a php script in the background every 15 seconds (otherwise I would simply use cron)... Would anyone be able to tell me how I would set this up?
View 2 Replies View RelatedI have a phpBB forum, which uses MySQl database.
For the last two months the forum has been going down every couple of days because the database service has been continuously stoped running on the server with no reason.
What can cause such a frequent database failures?
Can someone attack the forum/database/server in a way that will cause the above problem?
(there is a good reason I consider this possibility very seriously)
How can I prevent futher database failures?
I execute the following commands, in the following order:
iptables --flush
iptables --zero
iptables -A INPUT -s 218.65.12.161 -j DROP
will that last command successfully ban that IP until reboot?
If not, what needs to be done? I can't access my site if I don't flush + zero iptables first but I need to be able to ban with iptables.
I don't know if you've already experienced this but I really want a server from Kimsufi (from OVH) but I can't go trough their confirmation step where they need to send me a SMS with an activation code. I'm from Canada and althought the support told me it should work I have never received their SMS (and even tried my friends' cellphone numbers)
The support also said that I could choose the "skip verification" step and go trought the process, but when I try this, the process goes back to the SMS verification step with an error message telling me I didn't enter the right code (Since I entered nothing of course)
Has anybody ever had any problem like this? I have a friend who's from France and he said it was lightning fast, so I'm wondering if my only option is to find someone who will activate my account for me in Europe.
i just ordered a new server in Limestonenetworks.
I'll post my experience here about they
I ordered the following server:
[url]
If everything goes all right i'll make sure to give they the best Review i can give to a company!
hours after I ordered, I contact them and they say my payment wasnt recieved.
I checked my email, "Sale transaction has been completed", "Your payment ID xxxxxxxx was successful"
etc.
The payment went through, and they're saying i never paid
I bought Gigenet.com server.
How long after the server opens
Find a good coupon code for shared hosting services? Share it!
View 11 Replies View RelatedWell I ordered a nocster server about 12 hours ago, received the billing authorisation form (im a new client) and completed that scanned it along with id and utility statement and emailed it back to the auth address etc.
I'm yet to receive an email or anything accepting it and im just a little concerned that it didnt get through due to being a large email with attachements etc.
So my question is...how long does it usually take for billing to approve you and do they send you an email stating as such?? Also how long till server delivery on average?
I know that actual server delivery can take up to 5 days etc, im just interested on the average.
36 Hours ago i placed an order at dynu.com
I paid the company via Paypal right away and havent heard a thing since. I tried to write and call the phonenumbers listet, but no response
Have any of you guys had bad bad experiences with this company?
As a blog host will you delete a blog without a court decision?, or a rejoinder from the displeased party?
View 8 Replies View RelatedThe onboard NICs on one our machines have become faulty, but due to their being no spare card slots on the server - a USB NIC has been used as a replacement.
This was fine, until the machine had to be reset - and on reboot MS SQL and Merak both failed - the reason being they load up *before* the USB driver kicks in for the nic (MS SQL for example tries to start, cannot listen on the IP then fails - Merak loads up, but doesn't bind -- even after the card comes up).
So my question is, is there a way to make the USB drivers load up first, or somehow put a delay on MS SQL and Merak?
MYSQL doesn't seem to be affected .... but that could just be fluke...
Some of our clients have alot of webspaces (resellers that migrated from Expand) and having to order the list of webspaces each time they want to move to another domain is causing them some hassle. Is there a way to set the webspaces to order by name by default?
View 2 Replies View Relatedordered at 5/28/2008
No response yet
I am posting this to tell my experience with UKeasily. I ordered a dedicated server from UKeasily on 8th March.
I did a research on WHT and chatted with their live help. Everything seems great. A tracert to their test IP also shows their server in good location and returned good net stats for me.
However, everything changed after I putting down my orders and paid the money. 8th March is a saturday and I do not expect them to act on week end. I phoned them on monday 10th March and got firm words from them that my order was received and the server will be ready in 48 hours. I was happy to hear it.
Then the bad news come. The dedicated server is not ready on 13th March. I waited for another day to call UKeasily. But only to find out that the UKeasily's telephone numbers are either no longer in use or go to answering machine. UKeasily's live chat has been offline for 5 days. Messages left out on their support system was not answered.
I did receive an email from google checkout telling me that UKeasily informed them the server order was shipped. I myself then checked my email box but found nothing. Called UKeasily again, still the answering machine.
I am running dedicated servers on UK2, OVH and Godaddy. Those companies may have slower server installation time but with good level of support. The level of service received from UKeasily is disappointing.
Beware if you were about to buy from UKeasily as of now. A server company that has the live chat offline for more than 5 consecutuve days and not answering even sales calls may not provide enough technical support while you need it. If you check their website, their live chat is still offline and sales number still goes to answering machine.
I have vhost setup for test of a new website. I want to allow access on the localhost, and, from one IP from the Internet (redacted). Apache serves the site just fine on the server but I can't access the site from my the "xxx...." IP.
I'm using a physical path to test from the public IP as follows:
xxx.xxx.xxx.xxx/~user/test/index.html
I have vhost setup for test of a new website. I want to allow access on the localhost, and, from one IP from the Internet (redacted). Apache serves the site just fine on the server but I can't access the site from my the "xxx...." IP.
I'm using a physical path to test from the public IP as follows:
Quote:
http://xxx.xxx.xxx.xxx/~user/test/index.html
Apache v2.2
RHEL6
UserDir configured/running
SuExec configured/running
Below is the relevant vhost block in httpd.conf:
Code:
<VirtualHost *:80>
ServerName test
ServerAlias test
DocumentRoot /home/user/public_html/test
<IfModule mod_fcgid.c>
[Code] .....
I don't have a FQDN as yet, so I just made a entry in /etc/hosts as follows:
Code:
127.0.0.1 test
Here is an excerpt from the Apache error log:
Quote:
[Mon Jun 17 12:02:16 2013] [error] [client xxx.xxx.xxx.xxx] client denied by server configuration: /home/user/public_html/test/index.html
I've checked the firewall and the /etc/hosts.allow- that's not it. I've read the Apache docs and in the vhost block Allow should be evaluated last, and apparently is matching localhost but is not matching my IP.
I have the 3 default plans for hosting, Bronze, Silver and Gold
When they display, they come up as Bronze, Gold and Silver
Is there a way that I can change the display order? It seems to be doing them in alphabetical order instead of how I want them.
2008-04-06 08:52:32.597ERRORApache Binary Path must be set properly in order replace Apache, fall back to 'Reload on configuration file change'.
2008-04-06 08:52:32.602WARN[configerver:listener] No listener is available for normal virtual host!
2008-04-06 08:52:32.604ERROR[config:template:centralConfigLog] Listener [Default] does not exist
2008-04-06 08:52:32.605ERROR[config:templateHP_SuEXEC] Listener [Default] does not exist
2008-04-06 08:52:32.605ERROR[config:template:EasyRailsWithSuEXEC] Listener [Default] does not exist
2008-04-06 08:52:32.617WARNStandard Edition only support up to 5 Apache vhosts.
I did everything on the litespeed setup I was soppose to found at their wiki site. But still I recieve these errors, LiteSpeed works on my server because httpd is disabled and LiteSpeed is responding to request now.
I am having to restart https after a reboot in order to get the virtual hosts working.
If I DON'T restart https, all I get is the system default page and NOT the individual vhost index pages.
I find that I like using CPanel with addon domains in a new unlimited domains shared plan rather than using WHM with each name having its own CPanel in a reseller plan (which I have been used to until now at another host). The only problem is that all the addon domains are out of order - they are not even in the order in which I add them. This puts a damper on things and makes managing them much less efficient than one would expect with the addons in order.
After putting in a support ticket, I was told they can't do anything about it at all. They told me the order of the listing is the order in the "mail server apache configuration."
After posting this matter here in the Apache forum, I have been informed by an SP member that the answer I got wouldn't hold any water at all, or more accurately, consists of a whole lot of smoke. As a person who knows how easy and basic it is to sort data lists or drop-down form selector fields myself, I must admit that it's hard to believe nothing can be done in the 21st century.
I have no desire at all to go with another reseller plan, and like using CPanel instead with addons.
Does anyone know of the good and well known unlimited domain hosting providers who keep the addon domains in order within CPanel? Is there any other good option for shared hosting that doesn't involve using WHM and does offer common sense multiple domain management where everything is in order?
I have a Server with Centos7 + Plesk 12 and in the service configuration say that the Bind service is not installed, from command line i have install named services and make a manual configuration the first domain, but when I return to the service page in plesk... the problem is the same, the Bind Service is not installed; then the problem is when i want create a new hosting i need to go to the ssh to make the DNS configuration...
View 1 Replies View RelatedGot following Problem: Unable to find service node for web service on domain with id = 0
After a Check from [URL] ....
I tried this: [URL] ....
Result:
+--------------------+--------------+---------------------------------------+------------------------------+------------+
| Domains | Service Type | IpAddressesCollections.ipCollectionId | Current value of ipAddressId | Have to be |
+--------------------+--------------+---------------------------------------+------------------------------+------------+
| XXXXXXXXXXXXX.org | mail | 30 | 0 | 1 |
+--------------------+--------------+---------------------------------------+------------------------------+------------+
Resolution:
mysql -uadmin -p`cat /etc/psa/.psa.shadow` -Dpsa -e 'Update IpAddressesCollections SET ipAddressId = 1 WHERE ipCollectionId = 30'
Result: ERROR 1062 (23000) at line 1: Duplicate entry '30-0' for key 'PRIMARY'
Deleted a domain workspace in Parallels Plesk and now I am getting this error when signing into the panel:Looked at the logs and been trying multiple commands (including the bootstrapper repair etc.)I found the full error from the logs:
[13-Jun-2015 16:35:33 UTC] PleskDBException: Unable to find service node for web service on domain with id=6
file: /usr/local/psa/admin/plib/PhDomain.php
line: 1404
code: 0
trace: #0 /usr/local/psa/admin/plib/Smb/Subscription/Domain.php(490): PhDomain->getWebHostingServiceNode()
[code]....
We are currently using Parallel Plesk 11.0 version and there is one requirement from microsoft provider to add the exact same values in SRV Records.
Priority of Service = 100
Weight of Service = 1
but these values are not available in the dropdownlist. attached are the screenshots.