Some of our clients have alot of webspaces (resellers that migrated from Expand) and having to order the list of webspaces each time they want to move to another domain is causing them some hassle. Is there a way to set the webspaces to order by name by default?
View 2 RepliesSo per my other message [URL] .... we have four websites which we can't delete from PPA (Services/Websites doesn't have a way to do that) or from Hosting Panel (Webspaces says, "The selected webspaces were scheduled for removal," but they don't delete). In Hosting Panel, three have always shown as Failed and one as Pending.
The DNS zones can be deleted but they reappear if I "Apply DNS Template Changes" presumably because the websites are defined.
How to install a certificate for a brand ?
Let's say I have a brand B associate to a reseller R and a domain name domain.com.
When B sell a new subscription (with the associated webspace) it is available under sub.domain.com.
I would like to have a specific SSL certificate installed by default for every newly created webspaces by B under xxx.domain.co
I just upgrated from Plesk 11 to Plesk 12 and now it looks like my admin account is not admin anymore. I can only see the domains that is subscribed to my username.
Is that normal? How can I see all subscriptions now?
Plesk 11.5.30 all latest updated installed is used with Power-User view on an Ubuntu 12.04 LTS 64 Bit system.
The Plesk Interface is working well in general. But if the customer clicks on "Webspaces" -> Add Webspace they run in a:
[URL] ....
Browser:
502 Bad Gateway
nginx
To try to fix it with:
/usr/local/psa/admin/bin/nginxmng --disable
/usr/local/psa/admin/sbin/httpdmng --reconfigure-all
/etc/init.d/apache2 restart
/etc/init.d/ngnix restart ( does not work anyway since the customer is not using it ) -> ngnix_enable=no
Which did not work ( ngnix is and was not active )
In the log /var/log/sw-cp-server/error.log
we can see:
[error] 1936#0: *180 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 84.177.142.220, server: , request: "GET /smb/account/create-subscription HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "server:8443", referrer: "https://server:8443/smb/account"
After an upgrade to version 12 the link 'Show all my webspaces' is missing on the Startpage/Dashboard.
Only the link to create a new own webspace is still present. Are there any settings I haven't found right now to customise this ???
I have 2 webspaces on my server, www.a.com and www.b.com
I initially setup www.a.com, everything works fine and I can access the emails for a.com through webmail.a.com
Then I setup www.b.com using almost identical DNS settings, except that each domain has its own dedicated IP
Now, the problem is I am not able access webmail.b.com, the error message is server not found, why is this?
It seems that I can only access the emails for b.com using webmail.a.com
I have mailenable version 8 standard installed...
I am trying to install Automation, and I keep getting an error after the "Getting SELinux" step, here is a log of the process so far:
Code:
[INFO]: Checking current user privileges...
[INFO]: Checking critical environment requirements...
[INFO]: Determining OS parameters...
[INFO]: Detected OS: CentOS-5-x86_64
[INFO]: Getting SELinux state...
[ERROR]: Unexpected error: ''
[Code] ....
I have tried running the installation on a different server and the same issue came up...
I am installing plesk automation on centos 6.5 using this command on a fresh system
./ppa_installer --password some_password --admin_email some_email
and get the following error.
[LOGTEE]: Error Downloading Packages:
[LOGTEE]:
[LOGTEE]: libuuid-2.17.2-12.18.el6.i686: failure: Packages/libuuid-2.17.2-12.18.el6.i686.rpm from base: [Errno 256] No more mirrors to try.
Looks like some lib is not found in the mirrors.
On a clean install of CentOS 6.6 (Final) I did the following:
1. updated the /etc/hosts file to point my ip to the hostname
2. Open the ports in the iptables file.
3. ran the ppa_installer per the instructions on [URL] ....
The ppa_installer log says installed Successfully. However the following occurs:
1. Cannot browse to the url:8443, or any of the other variations (8080, 8880, https/http)
2. Yum installer is now broken (I replicated this twice). Yum will not run at all with the following error:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/libcurl.so.4: file too short
Please install a package which provides this module, or verify that the module is installed correctly.It's possible that the above module doesn't match the
current version of Python, which is:
2.6.6 (r266:84292, Jan 22 2014, 09:42:36)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-4)]
I am now going to try Cent OS 6.4.. will report back.
I have the 3 default plans for hosting, Bronze, Silver and Gold
When they display, they come up as Bronze, Gold and Silver
Is there a way that I can change the display order? It seems to be doing them in alphabetical order instead of how I want them.
I have recently deployed PPA with on nodes with hostnames on the serverroom.net.au domain, so management.serverroom.net.au, mail.serverroom.net.au etc. The DNS is currently hosted on a plesk server which will soon be migrated to PPA.
When I add the serverroom.net.au domain to PPA, I it fails at the sync task with an error saying that there are no A or AAA records for ns1.serverroom.net.au, even when these records exist in the external DNS. The same error occurs when I try to add the domain as a dns entry and switch to internal...
i have installed a Win2008R2 server with IIS and Coldfusion. I want to allow customer to set DSN, i know that older "Plesk Panel" versions that can do but i missing this now in PPA in the customer view. In the subscription is OBDC and Coldfusion connections allowed and unlimited. Must i do anything to activate this ?
View 2 Replies View RelatedWe operate many Plesk VPS servers in a virtual environment for our customers and would really like the ability to allow Plesk VPS servers to switch to using our PPA DNS servers instead of having to have multiple ips on each VPS to run their own name servers. Not to mention the added nuisance of each customer having to register name servers and glue records.
We looked at adding the Plesk servers as nodes to our PPA cluster but the license jump and loss of Nginx is completely prohibitive. Is this possible?
How do I merge two subscriptions - ie, move domainB.com into the subscription of domainA.com?
View 5 Replies View RelatedI try to migrate FTP accounts from our old hosting panel to Plesk CP using plesk API, but I get following error message:
Code: You specified incorrect username.
The problem propably is, that the username (1234_ftpuserexample) stats with digits.
I try to apply my dns template to all dns but it can't work.
I try on the interface and on the command line.
/usr/local/psa/bin/dns --reset [domain_name] -ip [ip]
Is it somehow possible to disable autoresponders for spam mails? Many spam mails are sent under false addresses and will produce MAILER DEAEMON messages if the autoresponder trys to reply to them.
View 4 Replies View RelatedWe currently have Plesk Expand 2.3.2 with 3 Linux servers, 1 Windows server, a SmarterMail server and 2 DNS servers that we are looking to migrate to PPA 11.5. I have the PPA working okay and am trying to test out a migration on just one domain from one of the Linux servers. When I run the preliminary check I keep getting this error:
Error: Mail content transfer from Qmail/Postfix to SmarterMail mail service is not supported.
Assign this subscription to a service template which offers Postfix mail service. We aren't using Qmail or Postfix for user mailboxes in the Expand or PPA systems, only the SmarterMail. I've tried the work around listed here: [URL] .... but that didn't work.
Am I still going to have to assign Postfix to my Service Templates in PPA even if we're not planning on using it for mailboxes?
I have all my client hosting accounts set up to do backups daily but only keep two backups.
There is a problem as PPA is not deleting old backups and simply creates more and more backups until the backup server eventually runs out of space.
Any workaround for AWS and adding nodes for PPA. Since the AWS instances use key pairs for root access you can't ssh as root with a password.
View 3 Replies View RelatedIs here any way to get nginx running on the web nodes and be able to manage it from the CP like standalone Plesk servers?
View 3 Replies View RelatedI just noticed that in our first zone, every record has a TTL of 900. All three nameservers in our system are handing out the same incorrect TTLs (easily visible via AXFR, and expected since two are slaves). Operations > Customers > Customer > Domains > domain shows every record in this zone has a TTL of 42300. The DNS resource's Activation Parameters and zone's SOA are set as follows:
Refresh 43200
Retry 600
Expire 2419200
Min TTL 900
Default TTL 43200 (for the resource; not editable for the zone)
PPA seems to be silently using the Min TTL to override the zone records that it shows with the desired TTL on screen. Changing the Min TTL in the SOA for a zone changes the TTL of all records.
This zone has both template-generated and manual records.
We are having an issue with websites randomly getting disabled within our PPA system. There doesn't seem to be any reason why they are getting disabled. Our PPA is not tied to a billing system that would make them shut off. Turning them back on works fine but it shouldn't be just shutting them off.
View 2 Replies View RelatedWe are trying to add new service node but when we are trying to finish procedure we receive error: The usage of the resource "IP addresses" for subscription with ID "1" exceeds the value of "0".
We do not have a such subscription using ID "1". As I can see this is the ID in database for "Parallels Automation License Key", but it has unlimited license key and have already two nodes attached.
Are there any special practices to reboot a node in PPA?
So far a simple "shutdown -r now" hasn't broken anything but I want to make sure PPA doesn't make assumptions about the nodes being up at any point. (both management and service)...
1) I've used yum to upgrade php on a linux from 5.3.3 to 5.4.21, how do i update PPA to show 5.4.x rather than 5.3.3 (ideally it should read the server on scheduled task to get version number)
2) On Windows VMs it installed PHP 4, PHP 5.2, 5.3, 5.4. How do i a) remove PHP 4 option.
3) How do I specify which should be the default PHP Version.
I am using PPA 11.5
The migration tool allows only migration from other Parallels environments. What is the best way to migrate from an IIS environment. I'm assuming the API can be used to simply create webspace subscriptions and set the resource limits, right?
View 2 Replies View RelatedDoes HTTPS on a Windows site require SNI like it apparently does on Linux nodes? If it does, I've been avoiding moving a site to an existing server that only has one IP, so I may as well move it there instead of setting up a Windows node in PPA.
View 2 Replies View RelatedInstalling packages task failed. The log fails on:
Installing packages
Loaded plugins: fastestmirror, rhnplugin
Loading mirror speeds from cached hostfile
* cloudlinux-x86_64-server-6: cl-mirror.krystal.co.uk
* elrepo: mirrors.coreix.net
Running rpm_check_debug
Fatal error during packages installation: Test Transaction Errors: package mysql-libs-5.1.73-3.el6_5.x86_64 (which is newer than mysql-libs-5.1.71-1.el6.i686) is already installed
How can we get it to continue?
I configured Cloudflare in admin panel, I then logged in using my test customer account, I tried to install CloudFlare application (without license key for free mode) . I got the following error:
Error: Installation of CloudFlare for Parallels Plesk at http://MyLinuxWebsite.cyberhostpro.com/CloudFlare failed. Non-zero exit status returned by script. Output stream: 'PHP Warning: SimpleXMLElement::__construct(): Entity: line 6: parser error : Opening and ending tag mismatch: hr line 5 and body in /usr/local/psa/var/apscache/data-mezJCJ/scripts/configure.php on line 262
[code]....