One friend I host sites for is reporting 492MB in WHM, but running DU reports 5.4GB for just one site!!! I've had the DC run Quotafix, but it's still not correct. The site is drupal and DC said they can't even list the tmp folder for that account. Any suggestions so I don't loose $45/month in extra charges? I have no clue how many months this is been going on, but it's costing me allot it seems.
View 6 Replies
I have some small colo in an a DC that I have actual transfer basis on each server. Now they give me MRTG graphs and they say they go by what the switch reports for when they bill me. I haven't had an issue until this month when one of my servers which I only have one TB with was reported using 1372GB on their switch.
Now on my MRTG graphs it reported the monthly graph as the following:
Average In: 2360.8 kb/s (2.4%) 763.855996 GB
Average Out: 471.7 kb/s (0.5%) 152.6205485 GB
This reports under 1TB, so I thought that I was okay on my usage. Am I wrong in thinking that the average usage and actual usage should be very similar? I figured since MRTG takes how much you transfer every 5 minutes and averages that over 300 seconds to find the rate that it would report basically the same average usage as my actual usage.
I would like to know what are the kernel values for an RPM kernel.. I mean, I have the latest 2.6.x kernel running on a RHE 4 system, my question.. Is there any way to know the actual kernel values (drivers, options, etc)?
Same as when we write a phpinfo file (that shows libraries, etc) to know php values..
Id like to know how If can backup my actual config ( I have a vps at vpsempire) that my buddy is setting up for us to have a vpn.
My idea is to have a backup just in case something happens to the server or If I should migrate it ( just precaution). FYI: server has 128 mb
the os Is centos
i have to reload a page several times. at least once. the templates show up fine, but the actual images and contents do not show up unless i reload the page....this is evident during peak hours but not during normal hours.....
i've done tracert, no lost packets.
Considering a dedicated box at Gigenet, as their configurations and prices look good. However, I don't know any customers there.
We're looking for a basic unmanaged box with decent latency to both coasts and non-idiotic people to respond to tickets.
My host keeps telling me that it is my connection but my server keeps getting slower and slower. how can I actually test it?
View 3 Replies View RelatedIs there a site that shows the actual uptime for a host?
View 14 Replies View Relatedif there is anyway that IIS 6.0 can do reporting of the websites that are running on it. For example I would like to get the local IP address and host header values for them. I can do it manual by going to each website but that will take forever. It seems like there should be a easier way.
View 1 Replies View RelatedI am maintaining a dedicated server ( which have apache,mysql,ftp,dns servers) for my organization , i want to produce a weekly report on server like,
1)Avg Server load for current week
2)Avg Memory usage for current week
3)No.of time apache,mysql,dns was killed in current week
As above i want produce a report ,How can take such kind of report from server? Is there is any tool for report generation?
We developed an Exim server on debian that sending mails outside to our customers. It's an IP based auth server. For bounce reporting and management, what would you recommend us?
Is there anything like; send all bouncing mails that sent from this server to myaccount@gmail.com? We need this to be done in MTA level..
I have several servers and I need a tool to measure CPU/disk/memory performance.
I no nothing about hardware (and I also don't want/need to know).
The tools is to compare only - I don't care about the measure unit, I just need a way to compare the performance between my servers like which one as a faster CPU and so on...
Anyone knows such a FREEWARE (and not bloatware) tool?
If the tool has some kind of hardware report... well.. even better.
I just leased a server through EV1. It's Linux (I think), Apache, and Plesk 8.0. I'm trying to get error reporting to work for my php scripts. I opened up the php.ini file (I'm about 90% sure that it's the right php.ini file) found in the /etc folder. I changed error reporting to "on" and restarted my server with Plesk.
PHP errors are still not showing up.
I got mod_evasive installed and its working fine. Its detecting the IPs, blocking the IPs and sending me the emails.
The emails I'm getting only have the sender name "Apache" and the content shows the IP address is blocking.
How can I enhance the email report to display the following:
1) get a proper Subject header in the email
2) change the From header to include the hostname - i.e.
apache@web.domain.tld
3) have the program do a reverse lookup on the ip, and include that in the body.
Do I need to include a script using the DOSSystemCommand to do this?
Wondering if anyone knows of an email DNSBL that are have a real time reporting tool which directly feeds the DNSBL?
I have been using Spamcop for reporting in hopes I might be able to get some IP's listed. However so far I have not seen any IP's listed until many hours or days after they are reported (possibly going through a validation process?).
Wondering if anyone knows a more pro-active DNSBL that is fed directly by reporting and administrators?
How would I go about reporting a website for illegal hacking and other activities?
Their host is fully supporting them. They have even given them the ip address of the proxy I used, in which case the client of theirs have added the proxy to their htaccess deny list.
I rebooted my server and now munin is not showing any eth0 traffic. All other graphs are fine. I can see there is a ton of apache accesses so there is definitely eth0 traffic. Munin logs report no errors. I restarted munin and munin-node. I even did 'yum remove munin munin-node' and reinstalled again but it still doesn't work for eth0.
View 4 Replies View RelatedWe've got a client who is using both AWstats and Webalizer and they are claiming the numbers are different between the two and that the numbers reported are not accurate. They need a specific list on how many impressions they are getting on a daily, weekly and monthly time period for advertisers.
View 7 Replies View RelatedAnyone else sign up for this?
Did microsoft require your host email them and say "[you] have exclusive sending rights for this IP"?
Here is the part of the email from microsoft:
xx, unfortunately, we have not received an e-mail confirmation from
your ISP, [host], for your IP
x.x.x.x. Please ask them to re-send the e-mail confirmation to [email] with the [id] subject. Please also
ask them to include you on the "To" or "Cc" field in case that we fail
to receive their e-mail confirmation.
Is this a requirement for everybody?
I signed up for AOL's junk reporting program a few months ago and I didn't have to bother anybody about it.
If I recall correctly, all AOL cared about was whether or not my reverse DNS was set properly.
Telia is reporting a fiber cut in the US - any other carriers impacted?
from Telia:
We regret to advise that we are currently experiencing a cable cut in
the United States. This outage is causing degradation in our IP
backbone, which may affect your service.
The fault has been brought to the attention of senior management, and we
are actively working to resolve the fault. Unfortunately we do not know
when the fault will be resolved.
We will update you as soon as we have further information, and apologise
for the inconvenience caused to you and your customers.
I am running plesk 11.05 Plesk on windows server. I have noticed this things twice...
While migrating accounts one server to another Smartermail not showing actual mail received date. For all accounts and emails Smartermail showing Migration date..
My more than 10000 emails showing migration date as received date..
The disk space reported by "df" is not accurate. How do i check/fix the FS w/o turning the server off?
View 5 Replies View Relatedwhen I find the subscription from the admin side of PPA, if I select "Login as user" I've noticed that it is different from actually logging in as the user - for example - "add domain alias" is missing when I login as a customer - but not as an admin... I need my customers to add their own aliases and manage them - how do I add that feature to the client login side?
View 9 Replies View RelatedI have been using Blue Host for years, but recently they kept suspending my account due to performance problem.
I was only running a php forum (phpBB3) and a Wordpress blog. They kept mentioning it is not problem with space/bandwidth, but issues with "Running application causing high load", and the mysql queries from phpBB3 are taking too long.
Now I am planning to add a Ruby on Rails application. I am sure it will cost more CPU usage. What should I do? Will a move to VPS hosting solve my problem?
We are currently looking to move to a new dedicated server provider located in the United Kingdom. The server is solely used to provide an IRC daemon to a large IRC network that receives multiple gigabits of DDoS and PPS. We are currently with another hosting provider who can no longer support us.
Our current specification is DualCore Xeon 2.67Ghz/4MB Cache with 500GB SATA HDD. A good connection and available bandwidth (preferably 3-5,000 GB bandwidth /month) included in the price. We are seeking to move to a new dedicated server host, if you know a company that can accommodate our needs,
I need to copy some large files from ServerA to ServerB, I want to use scp command.
I need a step by step guide to use it please.
from which server should I start the conection?
what is command to use?
...
How do you prevent people from using different IPs on a machine that has a couple VPS clients on it.
If client A has xxx.xxx.xxx.100-xxx.xxx.xxx.103 and client B has xxx.xxx.xxx.104-xxx.xxx.xxx.105. How do you prevent client B from using client A's IPs? Can't he easily modify the config file for his ethernet device to use an IP that hasn't been assigned to him but is assiged to someone else on the same machine?
i checked the CPU usage on my vpc tru Plesk and Remote control, bouth stating i got high CPU usage around 89% 90% TO 96% up and down, no program is using the resources they are all in 0% in the process tab, but when you check the Performance it stats 95%, i dont understand what is going on,
it's a windows O/S ,vps
