We developed an Exim server on debian that sending mails outside to our customers. It's an IP based auth server. For bounce reporting and management, what would you recommend us?
Is there anything like; send all bouncing mails that sent from this server to myaccount@gmail.com? We need this to be done in MTA level..
if there is anyway that IIS 6.0 can do reporting of the websites that are running on it. For example I would like to get the local IP address and host header values for them. I can do it manual by going to each website but that will take forever. It seems like there should be a easier way.
View 1 Replies View RelatedI am maintaining a dedicated server ( which have apache,mysql,ftp,dns servers) for my organization , i want to produce a weekly report on server like,
1)Avg Server load for current week
2)Avg Memory usage for current week
3)No.of time apache,mysql,dns was killed in current week
As above i want produce a report ,How can take such kind of report from server? Is there is any tool for report generation?
I have several servers and I need a tool to measure CPU/disk/memory performance.
I no nothing about hardware (and I also don't want/need to know).
The tools is to compare only - I don't care about the measure unit, I just need a way to compare the performance between my servers like which one as a faster CPU and so on...
Anyone knows such a FREEWARE (and not bloatware) tool?
If the tool has some kind of hardware report... well.. even better.
One friend I host sites for is reporting 492MB in WHM, but running DU reports 5.4GB for just one site!!! I've had the DC run Quotafix, but it's still not correct. The site is drupal and DC said they can't even list the tmp folder for that account. Any suggestions so I don't loose $45/month in extra charges? I have no clue how many months this is been going on, but it's costing me allot it seems.
View 6 Replies View RelatedI just leased a server through EV1. It's Linux (I think), Apache, and Plesk 8.0. I'm trying to get error reporting to work for my php scripts. I opened up the php.ini file (I'm about 90% sure that it's the right php.ini file) found in the /etc folder. I changed error reporting to "on" and restarted my server with Plesk.
PHP errors are still not showing up.
I got mod_evasive installed and its working fine. Its detecting the IPs, blocking the IPs and sending me the emails.
The emails I'm getting only have the sender name "Apache" and the content shows the IP address is blocking.
How can I enhance the email report to display the following:
1) get a proper Subject header in the email
2) change the From header to include the hostname - i.e.
apache@web.domain.tld
3) have the program do a reverse lookup on the ip, and include that in the body.
Do I need to include a script using the DOSSystemCommand to do this?
in one server we have a .eml into exim filter (/etc/antivirus.exim)
But seem that is not sent bounce email that alert for this error
A log is as this
2008-04-02 14:29:32 34e3r-0345H-0J <= from@server.com H=** (**) [**.**.**.**] P$
2008-04-02 14:29:32 cwd=/var/spool/exim 3 args: /usr/sbin/exim -Mc 34e3r-0345H-0J
2008-04-02 14:29:32 34e3r-0345H-0J ** F=from@server.com [**.**.**.**] discarded: We do not accept ".eml" atta$
2008-04-02 14:29:32 34e3r-0345H-0J => discarded (system filter)
--
How to configure to send bounce email this?
we have a client that cant email us and when i track his email through c panel i get virtual_aliases via virtual_aliases router forced address failure.
the client says that he gets the error #5.1.1 smtp; 550 Sender verify failed>
we have several web clients that have this problem with us and I am pulling my hair out over it.
Where can I turn off the emails that go out in response to a message not being delivered?
View 2 Replies View Relatedsome of site at our servers receive many bounce email seems spamers use those domains as a sender or use sendmail php function in some scripts at accounts
View 3 Replies View RelatedI have a catchall for a domain that has been used for years, e.g. vendor1@mydomain.com, vendor2@mydomain.com. Unfortunately, thanks to the fact that maiming spammers is still against the law, I have to live with the fact that the world can no longer have catchall accounts with any usability. One particular jackass is using my domain to spoof numerous idiotic emails. He uses some combo of bulltek*****@mydomain.com. While I am transitioning all of my emails to either 1 account or forward individually each vendor account, how can I bounce emails using that set above?
I'm also looking for something better than spam assassin to prevent email and which will provide more options and a better interface.
Of note, this method of vendor@domain.com worked well because I was able to identify vendors who sold my email address to spam me...
Wondering if anyone knows of an email DNSBL that are have a real time reporting tool which directly feeds the DNSBL?
I have been using Spamcop for reporting in hopes I might be able to get some IP's listed. However so far I have not seen any IP's listed until many hours or days after they are reported (possibly going through a validation process?).
Wondering if anyone knows a more pro-active DNSBL that is fed directly by reporting and administrators?
Now that bbounce had officially closed down, does anyone know of a good hosted, non-boogietools solution for combating bounce emails?
View 0 Replies View RelatedNow that bbounce.com had closed down, does anyone know of a good hosted, non-boogietools solution for combating bounce emails?
View 2 Replies View RelatedHow would I go about reporting a website for illegal hacking and other activities?
Their host is fully supporting them. They have even given them the ip address of the proxy I used, in which case the client of theirs have added the proxy to their htaccess deny list.
I rebooted my server and now munin is not showing any eth0 traffic. All other graphs are fine. I can see there is a ton of apache accesses so there is definitely eth0 traffic. Munin logs report no errors. I restarted munin and munin-node. I even did 'yum remove munin munin-node' and reinstalled again but it still doesn't work for eth0.
View 4 Replies View RelatedWe've got a client who is using both AWstats and Webalizer and they are claiming the numbers are different between the two and that the numbers reported are not accurate. They need a specific list on how many impressions they are getting on a daily, weekly and monthly time period for advertisers.
View 7 Replies View RelatedAnyone else sign up for this?
Did microsoft require your host email them and say "[you] have exclusive sending rights for this IP"?
Here is the part of the email from microsoft:
xx, unfortunately, we have not received an e-mail confirmation from
your ISP, [host], for your IP
x.x.x.x. Please ask them to re-send the e-mail confirmation to [email] with the [id] subject. Please also
ask them to include you on the "To" or "Cc" field in case that we fail
to receive their e-mail confirmation.
Is this a requirement for everybody?
I signed up for AOL's junk reporting program a few months ago and I didn't have to bother anybody about it.
If I recall correctly, all AOL cared about was whether or not my reverse DNS was set properly.
Telia is reporting a fiber cut in the US - any other carriers impacted?
from Telia:
We regret to advise that we are currently experiencing a cable cut in
the United States. This outage is causing degradation in our IP
backbone, which may affect your service.
The fault has been brought to the attention of senior management, and we
are actively working to resolve the fault. Unfortunately we do not know
when the fault will be resolved.
We will update you as soon as we have further information, and apologise
for the inconvenience caused to you and your customers.
The Non-Profit I work for uses IXWebhosting for our webhost and to manage email accounts. For the past 2 months whenever we send emails to anyone @baaqmd.gov, we receive CNAME bounceback errors.
I have contacted IXWebhosting and they say that their DNS server's aren't registering baaqmd.gov and that I need to contact baaqmd.gov. Well I've been in constant contact with baaqmd.gov's IT guy and they are receiving emails just fine from outside agencies. In fact, when I send a test email using GMAIL to baaqmd.gov, they receive it just fine.
To further confuse me, we receive emails fine from BAAQMD.gov.
All bounce emails are getting stack in queue (deferred). I tried a few suggestions I found around but nothing changed.
Ubuntu 12.04
Postfix
Plesk
Is it possible to get Plesk working with different bounce message templates? I'd like to make messages in my Polish language to make people know what the bounce problem is. How can I make plesk not to overwrite the main.cf and bounce directive ?
View 2 Replies View RelatedHow can i change the content of the bounce email?
I'm using Postfix 2.7.1 on Debian 6 with Plesk 11.0.9.
Currently the text of a bounce mail shows:
This is the mail system at host example.org.
Your message could not be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster. If you do so, please include this problem report. You can delete your own text from the attached returned message.
The mail system
<_plesk_bounce_example.org@localhost.localdomain> (expanded from
<ttt@example.org>): This address no longer accepts mail.
And I'd like to get rid of address <_plesk_bounce_example.org@localhost.localdomain>.
I added the bouce file template to Postfix's config by:
postconf -e 'bounce_file_template = /etc/postfix/bounce.cf'
Restarted postfix.
Config related to bounces:
Code:
~ # postconf | grep bounce
2bounce_notice_recipient = postmaster
address_verify_sender = $double_bounce_sender
backwards_bounce_logfile_compatibility = yes
bounce_notice_recipient = postmaster
[Code] ....
Well, where can i change the template for bounces, now?
I just configured the limit for outgoing mail. It works well, but I have still some questions.
Normally the server sends bounce messages in HTML and in german. They look nice and what is much more important, the users who do not speak english are informed what is going on.
The message that is send, when the limit for outgoing mail is exceeded uses a different template. It is delivered in plain text and after explaining in german that the mail could not be send, it states the reason in english.
Is there any way to edit this bounce message, so that a translation could be added?
I had some users complaining that the server is not working, because they tried again and again to send a mail and kept the counter over the limit. For they did not understand what was causing it.