I just leased a server through EV1. It's Linux (I think), Apache, and Plesk 8.0. I'm trying to get error reporting to work for my php scripts. I opened up the php.ini file (I'm about 90% sure that it's the right php.ini file) found in the /etc folder. I changed error reporting to "on" and restarted my server with Plesk.
PHP errors are still not showing up.
I wanted to activate nginx on my server als describes on [URL] ...
Installing was no problem, but when i try to enable nginx, I always get errors:
/usr/local/psa/admin/sbin/nginxmng -e
[2015-05-20 10:42:36] ERR [util_exec] proc_close() failed
Error occured while sending feedback. HTTP code returned: 502
[2015-05-20 10:42:37] ERR [util_exec] proc_close() failed
[Code] ....
Trying to enable Tomcat Java Servlets using autoinstaller via ssh, but I'm receiving the following error:
Exception: Failed to solve dependencies: 2:apache-commons-discovery-0.5-9.el7.noarch requires mvn(commons-logging:commons-logging)
ERROR: The Yum utility failed to install the required packages. Attention! Your software might be inoperable. ​When I try through the admin UI, I just get "The Yum utility failed to install the required packages"
when im trying to enable spam filter for a particular email account i get this mysql error:
Error: SQLSTATE[23000]: Integrity constraint violation: 1062 Duplicate entry 'xxxx@domain.com' for key 3 (mail id i hid it for security reasons xxxx@domain.com)..
i searchd in the psa database but could not find any duplication...
if there is anyway that IIS 6.0 can do reporting of the websites that are running on it. For example I would like to get the local IP address and host header values for them. I can do it manual by going to each website but that will take forever. It seems like there should be a easier way.
View 1 Replies View RelatedI am maintaining a dedicated server ( which have apache,mysql,ftp,dns servers) for my organization , i want to produce a weekly report on server like,
1)Avg Server load for current week
2)Avg Memory usage for current week
3)No.of time apache,mysql,dns was killed in current week
As above i want produce a report ,How can take such kind of report from server? Is there is any tool for report generation?
We developed an Exim server on debian that sending mails outside to our customers. It's an IP based auth server. For bounce reporting and management, what would you recommend us?
Is there anything like; send all bouncing mails that sent from this server to myaccount@gmail.com? We need this to be done in MTA level..
I have several servers and I need a tool to measure CPU/disk/memory performance.
I no nothing about hardware (and I also don't want/need to know).
The tools is to compare only - I don't care about the measure unit, I just need a way to compare the performance between my servers like which one as a faster CPU and so on...
Anyone knows such a FREEWARE (and not bloatware) tool?
If the tool has some kind of hardware report... well.. even better.
One friend I host sites for is reporting 492MB in WHM, but running DU reports 5.4GB for just one site!!! I've had the DC run Quotafix, but it's still not correct. The site is drupal and DC said they can't even list the tmp folder for that account. Any suggestions so I don't loose $45/month in extra charges? I have no clue how many months this is been going on, but it's costing me allot it seems.
View 6 Replies View RelatedI got mod_evasive installed and its working fine. Its detecting the IPs, blocking the IPs and sending me the emails.
The emails I'm getting only have the sender name "Apache" and the content shows the IP address is blocking.
How can I enhance the email report to display the following:
1) get a proper Subject header in the email
2) change the From header to include the hostname - i.e.
apache@web.domain.tld
3) have the program do a reverse lookup on the ip, and include that in the body.
Do I need to include a script using the DOSSystemCommand to do this?
Wondering if anyone knows of an email DNSBL that are have a real time reporting tool which directly feeds the DNSBL?
I have been using Spamcop for reporting in hopes I might be able to get some IP's listed. However so far I have not seen any IP's listed until many hours or days after they are reported (possibly going through a validation process?).
Wondering if anyone knows a more pro-active DNSBL that is fed directly by reporting and administrators?
How would I go about reporting a website for illegal hacking and other activities?
Their host is fully supporting them. They have even given them the ip address of the proxy I used, in which case the client of theirs have added the proxy to their htaccess deny list.
I rebooted my server and now munin is not showing any eth0 traffic. All other graphs are fine. I can see there is a ton of apache accesses so there is definitely eth0 traffic. Munin logs report no errors. I restarted munin and munin-node. I even did 'yum remove munin munin-node' and reinstalled again but it still doesn't work for eth0.
View 4 Replies View RelatedWe've got a client who is using both AWstats and Webalizer and they are claiming the numbers are different between the two and that the numbers reported are not accurate. They need a specific list on how many impressions they are getting on a daily, weekly and monthly time period for advertisers.
View 7 Replies View RelatedAnyone else sign up for this?
Did microsoft require your host email them and say "[you] have exclusive sending rights for this IP"?
Here is the part of the email from microsoft:
xx, unfortunately, we have not received an e-mail confirmation from
your ISP, [host], for your IP
x.x.x.x. Please ask them to re-send the e-mail confirmation to [email] with the [id] subject. Please also
ask them to include you on the "To" or "Cc" field in case that we fail
to receive their e-mail confirmation.
Is this a requirement for everybody?
I signed up for AOL's junk reporting program a few months ago and I didn't have to bother anybody about it.
If I recall correctly, all AOL cared about was whether or not my reverse DNS was set properly.
Telia is reporting a fiber cut in the US - any other carriers impacted?
from Telia:
We regret to advise that we are currently experiencing a cable cut in
the United States. This outage is causing degradation in our IP
backbone, which may affect your service.
The fault has been brought to the attention of senior management, and we
are actively working to resolve the fault. Unfortunately we do not know
when the fault will be resolved.
We will update you as soon as we have further information, and apologise
for the inconvenience caused to you and your customers.
My client wants to send SMS from his new website that we are making. How can I enable this feature ...? What's the easiest way?
(The reason I'm posting this question in this forum is that I'm just guessing that this has something to do with web hosting. But, admin, if I'm wrong about this, please move this to a different forum.)
I read that Clickatell is a good service to use to provide this service on our website. Did anyone here use this service before? If so, what did you think about it? Is it easy to set up?
I am running a Fedora Core 4 VPS with Apache 2.0.53 I think.
I would really like to install/enable WebDAV so that I can mount some of the server storage as a drive on my computer for easy file manipulation from desktop, laptop, gf's house, etc. without having to carry the files around with me all the time.
How would I go about configuring WebDAV?
dears how can i enable jsp for a specify domain?
i tried this @ putty:
/scripts/installservlet <domain.com>
but it doesnt work for me
im using cpanel 11.x
Is there any way to run SSI with html instead of shtm or shtml in Windows 2003 IIS 6 server?
View 0 Replies View RelatedI cannot enable DMA mode on /dev/hda when attemping to enable it via ssh
Code:
hdparm -d1 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
Code:
hdparm -tT /dev/hda
/dev/hda:
Timing cached reads: 1632 MB in 2.00 seconds = 814.90 MB/sec
Timing buffered disk reads: 8 MB in 3.42 seconds = 2.34 MB/sec
I am running CentOS 4.7 and cPanel 11. cPanel also shows DMA is not enable on this drive. Kernel: 2.6.9-78.0.13.ELsmp
Code:
cat /boot/config-2.6.9-78.0.13.ELsmp |grep DMA
CONFIG_GENERIC_ISA_DMA=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_PDC_ADMA=m
Code:
hdparm -i /dev/hda
/dev/hda:
Model=WDC WD2500JB-00REA0, FwRev=20.00K20, SerialNo=WD-WMAN542173
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
* signifies the current active mode
This wiki page has discussed how to enable iptables modules in a VPS.
View 6 Replies View RelatedBoth IE7 and FF are configured to use javascript, but no sites seem to recognize the fact and report that it's been blocked or off. How do I enabled this?
View 1 Replies View RelatedWhen I create a website in apache I have to enable php on it manually, Is there a way that I enable php by default on root of apache?
View 3 Replies View RelatedI have a dedicated server. It is a Fedora Core 6. It came with "Plesk 30 domain license". However, this license of Plesk doesn't have SpamAssassin enabled. In order to get the license with SpamAssassin, it costs an extra $30 a month.
I believe SpamAssassin by default is in fact installed on the sever, but some of my users are reporting that they are getting Spam. How can I check is SpamAssassin is running? How do I configure SpamAssassin to filter spam on all the e-mail addresses that are created in Plesk?
I have SSH access to the server.
root@contact [~]# hdparm -d 1 /dev/hdd
/dev/hdd:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
root@contact [~]#
root@contact [~]# hdparm -X66 -d1 /dev/hdd
/dev/hdd:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
setting xfermode to 66 (UltraDMA mode2)
using_dma = 0 (off)
root@contact [~]#
drive
root@contact [~]# hdparm -I /dev/hdd
/dev/hdd:
ATA device, with non-removable media
Model Number: Hitachi HDP725050GLA360
Serial Number: GEA550RF04Z90G
Firmware Revision: GM4OA52A
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5; Revision: ATA8-AST T13 Project D1697 Revision 0b
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 65535
heads 16 1
sectors/track 63 63
--
CHS current addressable sectors: 4128705
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 976773168
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: unknown setting (0x0000)
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
Advanced Power Management feature set
Power-Up In Standby feature set
SET_FEATURES required to spinup after power up
Address Offset Reserved Area Boot
* SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Media Card Pass-Through
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* URG for READ_STREAM[_DMA]_EXT
* URG for WRITE_STREAM[_DMA]_EXT
* WRITE_UNCORRECTABLE command
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* unknown 76[12]
Non-Zero buffer offsets in DMA Setup FIS
DMA Setup Auto-Activate optimization
Device-initiated interface power management
In-order data delivery
* Software settings preservation
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
184min for SECURITY ERASE UNIT.
Checksum: correct ....
to run one PHP script from crontab as root..
But my basic PHP has shell_exec disabled in php.ini and when trying to run script that use shell_exec even from root I get error that function is disabled.
Do you have any suggestion how can I overcome this and have ability to use this function when executing php script from console?
I noticed on my new servers users doesnt have crontab permission.On my first server they have access.So what i need to do to enable users crontab permission automaticly on new servers?I have whm/cpanel there but it seems there is nothing about it there.
View 3 Replies View Relatedi just got setup with a dedicated linux server with cpanel/whm access and root and well i have a site on the server that im installing some software on and its come up saying that my server does not support these things and to change them
PHP Extension: GD
Your server does not support GD Library and cannot use (thumbnail generation, re-size/scale, etc).
PHP Function: mb_detect_encoding()
Your server does not support multibyte character encoding.
PHP Extension: openssl()
Your server does not support the openssl().
to take within my root access to turn on/ enable support for these functions and extension
