SSL For Any Domain Hosted On Single Server
Apr 22, 2009
is there any sort of ssl certificate that will 'secure' any domain, hosted on a single server?
For example, I have the following domains and subdomains:
google.com
test.google.com
mywebsite.com
hello.example.com
All will be hosted on the same server (same IP) and I want all to be secured, through a SIGNED certificate, not a self signed. I assumed that wildcard ssl would be fine for this, but I just took a look and it's only for subdomains: example.example.com hello.example.com.
Is there any way of having every subdomain and domain secured, using ssl, through one certificate? I don't want to have to buy individual certificates for every domain, that'd be... expensive.
View 7 Replies
ADVERTISEMENT
Nov 16, 2014
When I hit my server's domain it redirects me to one of the hosted sites' domain with a 302 redirect. It used to return the default plesk server page. How can I cancel the redirect?
View 2 Replies
View Related
Apr 13, 2015
I am running a CentOS 6.5, 64-bit server with Plesk 12.0.18, and need to install a wildcard SSL for one of the domains/sub domains hosted on this server.
So you have the csr and private key installed (and domain.crt?), you just need to open..
1. COMODORSAAddTrustCA
2. COMODORSADomainValidationSecureServerCA
On your desktop and combine the two files into a new intermediate.crt file and upload that as the CA File.
But I'm not sure why you can't add it as text.
Click to expand...
Click for original message
View 7 Replies
View Related
Apr 1, 2008
I have a .fr domain purchased from Gandi.net.
I have webhosting with GoDaddy.com.
After setting the DNS to point to GoDaddy.com (ns51 and ns52...) I get an error message and the DNS revert back to the default settings (gandi's DNS). AFNIC's(.fr regulator) zonecheck fails with the following error:
Primairens51.domaincontrol.com.208.109.14.47
Secondairens52.domaincontrol.com.208.109.255.26
Progression ....
View 5 Replies
View Related
Jan 21, 2008
i've been researching this but can't seem to find a decent solution.
basically trying to limit the cpu usage of a single domain, or limit accesses per hour if that's possible?
i tried adding an entry in /etc/security/limits.conf which restricts numproc to 2 and then down to 1, but it doens't seem to make any impact on the load. load of the server drops from about 1.5-2 down to 0.02 when this single site is suspended, and i can't have it run wild.
ideally would like a message that says something along the lines of server is too busy... trying again in 5 seconds or something along those lines?
View 5 Replies
View Related
Jul 7, 2015
I am currently running Apache on Ubuntu 14.04. I tried adding an alias, but it doesn't do exactly what I need. I have a single site and I need to point two domain names to it. The thing is, if someone types in www.site1.com I want it to show the url as www.site1.com and if someone types in www.site2.com I want it to continue to show www.site2.com in the URL. Right now if they type in www.site1.com it shows the first site name as the URL, but if they type in www.site2.com it changes the URL to www.site1.com. Below is what I have as my virtual host in my conf file currently.
OS - Ubuntu 14.04
Apache/2.4.7 (Ubuntu)
View 1 Replies
View Related
Jul 3, 2014
I have one valid commercial Comodo certificate. It is correctly installed and works fine on my 443 port when I go to https://www.domain1.com
However, I have quite a few other virtual hosts that also work fine on my port 80 when I go to http://www.domain2.com then http://www.domain3.com and so on.
Now out of curiosity I have typed https://www.domain2.com and it picked up the SSL certificate from my first domain1.com when it wasn't supposed to (I guess)! It reported an error but worked! Then I tried all my other domains 3,4,5 and so on and the issue repeated.
How do I keep this single certificate to the only domain name it belongs to? It has no wild cards and is valid for only one domain name I bought it for. The example of my hosts' configuration is below:
<VirtualHost *:80>
DocumentRoot "/directory/home/place"
ServerName domain1.com
<Directory "/directory/home/place">
allow from all
Options +Indexes
</Directory>
ServerAlias www.doamin1.com
</VirtualHost>
[code]...
View 8 Replies
View Related
Aug 11, 2014
Plesk Panel 11.5.30, on Centos 5.10. I have 2 'domains' running on the same ip; sub.mysite.com and mysite.com. I need to add SSL to sub.mysite.com.
From the documentation, [URL] ...., it appears that if the user is using a SNI compatible browser a single SSL certificate for sub.mysite.com should work (as I am using a linux server, SNI is enabled by default I believe).
However, the control panel for the domain (website & domains > hosting settings) states that "To employ SSL, move this site to a dedicated IP address, install an SSL certificate on the site, and then select it below." In addition, other documentation makes reference to a "Secure your sites" link on the control panel to implement a purchased SSL certificate, which is not visible to me - I presume because the domain is not on a dedicated ip address.
Can someone confirm that;
a) a SSL certificate for sub.mysite.com on a shared ip will work.
b) that the SSL for sub.mysite.com would managed at the server level (Server Management > Tools & Settings > SSL Certificates) rather than the domain's control panel.
One alternative may be to purchase a wildcard SSL certificate (*.mysite.com). This post [URL] .... suggests that this would work. However, this is a more costly option and does more that I need (i.e. delivers SSL for all domains).
I could also purchase a dedicated ip address for sub.mysite.com. I have no experience of moving domains within plesk from a shared ip to a dedicated ip. Is this a straightforward process?
View 1 Replies
View Related
Oct 29, 2007
I just moved my websites over to a server running plesk 8.2
Now when I look at any of my pages with firefox It puts a little circle logo thingy beside the url in the address bar and on the tab.
how to get rid of this?
Some of the domains are:
[url]
[url]
[url]
View 5 Replies
View Related
May 16, 2008
I have a problem where all email sent from uaccb.edu (studentmail.uaccb.edu [208.190.226.130]} is not arriving at my VPS. The people sending email from the above domain are not getting any errors, it is not being marked as spam, it is just being blackholed somehow.
I have checked the above IP and domain, and can't find it on any blacklist, and I am using pretty standard cPanel setup on my VPS. I have spam set to be marked and receive a fair amount and have it autorouted to a folder rather than auto-deleted.
From uaccb.edu, the only thing I have access to is Outlook Web Access to send test emails, and they are sent fine with no errors returned. If I send test emails to gmail and other similar email accounts, they go through fine, the only problem is to ANY domain hosted on my VPS. I have even recently transferred all the domains to a second VPS (with the same hosting company) at a different datacenter (for different reason) and the problem persists.
Is there any WHM setting or any ideas on how to troubleshoot this?
View 3 Replies
View Related
Jan 29, 2007
I'm running postfix 2.3.5 with my alias info being drawn from a mysql database.
What i'm trying to do is setup a partial catchall setup to forward all email that's addressed *@hah.cx to uber@spamcop.net. However, I want email addressed to mikey@hah.cx, and mike@hah.cx to be directed to my local "mikey" user email account.
View 0 Replies
View Related
Jun 21, 2015
I am using Plesk 12.0.18 Update #51 on Ubuntu 14.04.2 LTS.
I want to restore a single Domain from Plesk GUI but it failed:
Archiver error: from /private-backup/plesk/clients/WSKunde/domains/domainname.de/backup_domainname.de_conf_1506200200.tgz:
forkExecvPipes: execv() failed: No such file or directory
System error 2: No such file or directory
Warning: domain "domainname.de"
[Code] ....
View 2 Replies
View Related
Jul 3, 2014
Outlook 2013 complains about the SSL certificate when using email. Installing the certificate still doesn't stop the error/warning. What are my options?
Can I install on the plesk server a self-signed SSL cert and avoid the issues?
Can I buy & install a single certificate for that one domain and resolve the issue but not affect others.
Do I need to buy a SAN certificate for the whole server?
BTW I'm running CentOS 6.5 and Plesk 12.
View 3 Replies
View Related
Dec 17, 2014
I have hired two servers for plesk and I have the mail configured in one server and the website in another one, it all seems to work fine except for a problem.
When the server where the website is tries to send a message through a smtp account it can´t send it, it seems to be looking for the mail server in the same server where the website is instead of look for it in the other server.
How to configure this so it works correctly?
View 3 Replies
View Related
Sep 10, 2007
I'm using a shared host that provides good service and support, but there's one major issue I discovered recently:
Other sites hosted on their server are accessible through my domains and subdomain. For example:
Account2 on their server can be accessed through:
[url]
[url]
Host says:
"Because everything is Name-based, apache decides what directory is going to be used based upon the name that is provided. However, because the username is valid, it treats it as a vaild URL and redirects it to your site. There is no security issue, as this is just the way apache’s configuration works."
Is it really normal? Does the same happen on all apache servers? I think SE's would treat the other pages as mine, no?
View 3 Replies
View Related
Feb 4, 2007
We just moved a domain to a Canadian host. We want to make sure that the domain is actually hosted in Canada, how can we go about doing that? I thought of doing a standard traceroute, but usually the bandwidth is coming from the US, so at what point is it considered "Canadian hosted"?
View 2 Replies
View Related
Jul 1, 2015
CentOS 6. Apache 2.2.15
I am trying to redirect a request from a non-hosted domain, using a rewrite rule in our configuration file in conf.d. Our registrar has a pointer from this non-hosted domain to our domain.
Currently
*.domain1.com.vn -> http://www.domain1.com
domain1.com.vn -> http://domain1.com
I want to redirect a request like so in the web.conf file in conf.d
domain1.com.vn/terms => domain2.com/vn/terms
View 3 Replies
View Related
May 14, 2015
I have a full mail node and I have to move some domains on a different node without losing data . Is possible with PPA?
View 3 Replies
View Related
Aug 17, 2014
We have latest Plesk 12 on Centos 7, I can login to Plesk UI and mail is working,
but cannot access hosted website www.elcop.hr :
Error: Connection refused
View 19 Replies
View Related
Jul 14, 2007
i have a vps and although i can send mails without problem from my main root account, sending via any of the child accounts created for customers results in their email being picked up as spam (in hotmail at least).
To clarify, mydomain.com is my main name. Email can send without problem,
customersdomain.com, hosted on the same machine, when sending emails they are picked up as spam. The mx dns entries in the zone file are set (by default to) customersdomain.com. and for all the child domains customer1domain.com. etc.
Do i need to ask the datacenter to add a reverse dns entry for mail.mydomain.com?
Is this an issue with the mx records for the hosted domains? Should i change the hosted domaims mx entry on the customers domains to mail.mydomain.com?
I know the ip isnt blacklisted because exactly the same email goes through when sending from the mydomain.com email addresses.
View 14 Replies
View Related
Aug 29, 2014
I am currently running a trail of plex to see if it meets our requirements.
My domains are currently being hosted by an external provider and I have made the dns entry to point it the the server running plesk.
Now we can access the site created through plesk but the emails are not working not the webmail or even trying to forward the mails.
View 1 Replies
View Related
Nov 29, 2014
My requirement is to redirect all hosted domain's webmail to the main hosting webmail url .. how can this be achieved ?
View 7 Replies
View Related
Nov 18, 2008
I have a Linux(RHEL5) dedicated server.Tomcat version 5.x is running integrated with Apache and now i want to install tomcat 6.x integrate with apache without effecting older tomcat version. it will run as it is.
How can i do this and if yes then how can i set tomcat home path for both versions.
CATALINA_HOME=<Which path for both> and how to install it.
View 5 Replies
View Related
Sep 8, 2008
Based on todays equipement I know a person can spend Thousands on a good server, I'm looking to build my own and just want some advice on which way to go.
I'm thinking of just building the server pc in one case and the hard drive setup will be in a seperate case with the following:
3ware 9690SA-8E controller
Mass-Storage 8x by A-Tech Fabrication for a case
8 - SATA2 SEAGATE 1TB (7200rpm) 32MB on the controller as RAID
Can anyone give advice on what would be a good setup if you were running 1 single server for local businesses. I don't want to hear just pay for a provider as I've heard that one before now I'm looking to know what hardware setup you would run I like to play and learn. Even though sometimes the headache playing isn't as much fun as we sometimes may have hoped.
What are m/b and processor options for running a server?
What is min. amount of ram a person should run using linux and cpanel?
Should linux be on a max. amount of space for root and server files on a seperate mnt?
What connection up/down would be min. for usage of about 5gig/month?
View 5 Replies
View Related
Mar 6, 2008
i got my server. I'm still shopping for hard disks but the server is pretty much there.
i'm in Houston, Texas. i'll like to know if anyone can give me tips on what to look for in colo. what question should i ask or be aware of.
my budget is $100 per month. i don't use much bandwidth and it doesn't have to be premium bandwidth with basic service.
View 1 Replies
View Related
Jan 31, 2007
From reading these boards for a couple years now, I always had the impression that colo was cheapest in Texas or thereabouts, and was priciest in places like NYC. (Of course, I'm referring to relatively comparable service.)
Now I finally have a need for a single server colo (1U). The most-mentioned places in Texas on these boards are cologuys, colo4dallas, etc. Most of them have reasonable rates listed right on their website, around $100-170 for the bandwidth that I need, about 1.5Mbps.
But I've also been requesting quotes from various providers in NYC, who are also popular on these boards. And while there are some in the $200-250 range, which is what I was expecting, there are some that are mentioned highly on these boards (toqen, thenynoc, razorblue, etc.) that are quoting $60-100/month for the same amount of bandwidth.
I.e., not only comparable but in fact *lower* than the Texas colos.
What am I missing here? It's very possible that I'm comparing apples to oranges, cuz I really don't know any of these businesses. Just forming an opinion based on what gets recommended here on a consistent basis.
View 4 Replies
View Related
Feb 28, 2007
Does anyone know if there are providers left in Dallas that provide single server colocation solutions? If so, who are they and what can I expect in terms of pricing?
I am used to reselling shared and dedicated servers, but I've leased them for long, I could have paid for them by now. Some of my clients have their own systems too. They tend to request Dallas.
View 14 Replies
View Related
Jan 4, 2007
I am starting a small template based company. How many unique websites in their own unique folder can I host on a single server?
These websites would not get many hits, maybe a few hundread to a few thousand a month per site. My goal is to minimize the number of accounts I will have to open up with a web service provider.
Should I purchase 1 package per site or is there a way to get around this. Each unique site would have its own unique domain.
View 7 Replies
View Related
