Apache :: 2.2.22 Picks SSL For Every Single Domain Error
Jul 3, 2014
I have one valid commercial Comodo certificate. It is correctly installed and works fine on my 443 port when I go to https://www.domain1.com
However, I have quite a few other virtual hosts that also work fine on my port 80 when I go to http://www.domain2.com then http://www.domain3.com and so on.
Now out of curiosity I have typed https://www.domain2.com and it picked up the SSL certificate from my first domain1.com when it wasn't supposed to (I guess)! It reported an error but worked! Then I tried all my other domains 3,4,5 and so on and the issue repeated.
How do I keep this single certificate to the only domain name it belongs to? It has no wild cards and is valid for only one domain name I bought it for. The example of my hosts' configuration is below:
<VirtualHost *:80>
DocumentRoot "/directory/home/place"
ServerName domain1.com
<Directory "/directory/home/place">
allow from all
Options +Indexes
</Directory>
ServerAlias www.doamin1.com
</VirtualHost>
[code]...
View 8 Replies
ADVERTISEMENT
Jul 7, 2015
I am currently running Apache on Ubuntu 14.04. I tried adding an alias, but it doesn't do exactly what I need. I have a single site and I need to point two domain names to it. The thing is, if someone types in www.site1.com I want it to show the url as www.site1.com and if someone types in www.site2.com I want it to continue to show www.site2.com in the URL. Right now if they type in www.site1.com it shows the first site name as the URL, but if they type in www.site2.com it changes the URL to www.site1.com. Below is what I have as my virtual host in my conf file currently.
OS - Ubuntu 14.04
Apache/2.4.7 (Ubuntu)
View 1 Replies
View Related
Apr 30, 2013
I have 408 error and put a domain to impersonate the original is blank or rediccionamiento domain to the original. He always says: Time Up and error 408.
127.0.0.1 - - [30/Apr/2013:13:41:41 -0300] "-" 408 -
I own:
- Apache V: 2.4.4 Update 2
- Mod Security V: 2.7.3 Update 2
- Atomic Rules for Mod Security: Update 29/04/2013
- Mod mod_limitipconn V: 0.23.1
- Mod mod_antiloris V: 0.5.2
Do you think it's a bad configuration or a bug in programming? Eh I tried many ways, disabling modules, deactivating and activating settings, etc ...
View 2 Replies
View Related
Aug 1, 2008
Whenever I restart my apache on my VPS, it throws some wierd warnings:
Forcing reload of web server (apache2)...apache2: apr_sockaddr_info_get() failed for goebs
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
waiting apache2: apr_sockaddr_info_get() failed for goebs
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
.
where goebs is my VPS linux machine hostname.
I already have a domain setup with this VPS, and it works fine, just that I get this weird warning.
View 1 Replies
View Related
Apr 22, 2009
is there any sort of ssl certificate that will 'secure' any domain, hosted on a single server?
For example, I have the following domains and subdomains:
google.com
test.google.com
mywebsite.com
hello.example.com
All will be hosted on the same server (same IP) and I want all to be secured, through a SIGNED certificate, not a self signed. I assumed that wildcard ssl would be fine for this, but I just took a look and it's only for subdomains: example.example.com hello.example.com.
Is there any way of having every subdomain and domain secured, using ssl, through one certificate? I don't want to have to buy individual certificates for every domain, that'd be... expensive.
View 7 Replies
View Related
Jan 21, 2008
i've been researching this but can't seem to find a decent solution.
basically trying to limit the cpu usage of a single domain, or limit accesses per hour if that's possible?
i tried adding an entry in /etc/security/limits.conf which restricts numproc to 2 and then down to 1, but it doens't seem to make any impact on the load. load of the server drops from about 1.5-2 down to 0.02 when this single site is suspended, and i can't have it run wild.
ideally would like a message that says something along the lines of server is too busy... trying again in 5 seconds or something along those lines?
View 5 Replies
View Related
Aug 11, 2014
Plesk Panel 11.5.30, on Centos 5.10. I have 2 'domains' running on the same ip; sub.mysite.com and mysite.com. I need to add SSL to sub.mysite.com.
From the documentation, [URL] ...., it appears that if the user is using a SNI compatible browser a single SSL certificate for sub.mysite.com should work (as I am using a linux server, SNI is enabled by default I believe).
However, the control panel for the domain (website & domains > hosting settings) states that "To employ SSL, move this site to a dedicated IP address, install an SSL certificate on the site, and then select it below." In addition, other documentation makes reference to a "Secure your sites" link on the control panel to implement a purchased SSL certificate, which is not visible to me - I presume because the domain is not on a dedicated ip address.
Can someone confirm that;
a) a SSL certificate for sub.mysite.com on a shared ip will work.
b) that the SSL for sub.mysite.com would managed at the server level (Server Management > Tools & Settings > SSL Certificates) rather than the domain's control panel.
One alternative may be to purchase a wildcard SSL certificate (*.mysite.com). This post [URL] .... suggests that this would work. However, this is a more costly option and does more that I need (i.e. delivers SSL for all domains).
I could also purchase a dedicated ip address for sub.mysite.com. I have no experience of moving domains within plesk from a shared ip to a dedicated ip. Is this a straightforward process?
View 1 Replies
View Related
May 16, 2008
I have a problem where all email sent from uaccb.edu (studentmail.uaccb.edu [208.190.226.130]} is not arriving at my VPS. The people sending email from the above domain are not getting any errors, it is not being marked as spam, it is just being blackholed somehow.
I have checked the above IP and domain, and can't find it on any blacklist, and I am using pretty standard cPanel setup on my VPS. I have spam set to be marked and receive a fair amount and have it autorouted to a folder rather than auto-deleted.
From uaccb.edu, the only thing I have access to is Outlook Web Access to send test emails, and they are sent fine with no errors returned. If I send test emails to gmail and other similar email accounts, they go through fine, the only problem is to ANY domain hosted on my VPS. I have even recently transferred all the domains to a second VPS (with the same hosting company) at a different datacenter (for different reason) and the problem persists.
Is there any WHM setting or any ideas on how to troubleshoot this?
View 3 Replies
View Related
Jan 29, 2007
I'm running postfix 2.3.5 with my alias info being drawn from a mysql database.
What i'm trying to do is setup a partial catchall setup to forward all email that's addressed *@hah.cx to uber@spamcop.net. However, I want email addressed to mikey@hah.cx, and mike@hah.cx to be directed to my local "mikey" user email account.
View 0 Replies
View Related
Jun 21, 2015
I am using Plesk 12.0.18 Update #51 on Ubuntu 14.04.2 LTS.
I want to restore a single Domain from Plesk GUI but it failed:
Archiver error: from /private-backup/plesk/clients/WSKunde/domains/domainname.de/backup_domainname.de_conf_1506200200.tgz:
forkExecvPipes: execv() failed: No such file or directory
System error 2: No such file or directory
Warning: domain "domainname.de"
[Code] ....
View 2 Replies
View Related
Jul 3, 2014
Outlook 2013 complains about the SSL certificate when using email. Installing the certificate still doesn't stop the error/warning. What are my options?
Can I install on the plesk server a self-signed SSL cert and avoid the issues?
Can I buy & install a single certificate for that one domain and resolve the issue but not affect others.
Do I need to buy a SAN certificate for the whole server?
BTW I'm running CentOS 6.5 and Plesk 12.
View 3 Replies
View Related
Dec 17, 2014
I have hired two servers for plesk and I have the mail configured in one server and the website in another one, it all seems to work fine except for a problem.
When the server where the website is tries to send a message through a smtp account it can´t send it, it seems to be looking for the mail server in the same server where the website is instead of look for it in the other server.
How to configure this so it works correctly?
View 3 Replies
View Related
May 14, 2015
I have a full mail node and I have to move some domains on a different node without losing data . Is possible with PPA?
View 3 Replies
View Related
Jul 11, 2009
Our web server encounter a problem lately, that an IP address in India repetitively sent requests that uses up all connections available in Apache. All connections appear to be in W state. The connections are not terminated by Apache even though timeout has been set to lower 30 seconds. Similarly, MySQL connections also are not dropped until Apache is restarted.
View 7 Replies
View Related
Oct 10, 2009
We want to implementing the load balancing for our domain, if the traffic is heavy and 8080 (i.e. currently integrated with apache) doesn''t serve more that time the apache will call 8081 and serve to the request without any problem.
We want to access our site www.domain.com (i.e. run on port 80). Please guide us it is possible or not?
View 2 Replies
View Related
Dec 17, 2007
I already have PHP 4 installed on my server and now i want to install php5 on same apache instance but different port.I want to configure the system so that on one port php4 runa dn on second port PHP5 run.
View 1 Replies
View Related
May 12, 2015
Wordpress installation (WPML with 3rd level domain es. site. com, fr. site. com).I need to redirect page from old subdomain to a new subdomain
Example:
esp.site.com/oldpage -> es.site.com/newpage (different subdomain)
esp.site.com/oldpage1 -> es.site.com/newpage
esp.site.com/oldpage2 -> es.site.com/newpage
Source site is very chaotic (static pages + wp pages) and there are no clear rule for redirection (no regex ).So I need to redirect every single page but syntax:
Redirect 301 esp.site.com/oldpage http:// es.site.com/newpage doesn't work!I think "esp.site.com" in source page is not acceptable syntax..which is the correct syntax ? Can I manage all from one .htaccess file in main root (www) or should I create "esp" directory (and point old subdomain to it - one for every language) and put .htaccess in every directory with redirection ?
View 1 Replies
View Related
Jan 8, 2015
I have diesel generator controller card (IB Lite made by Comap) and the built-in webserver supports only a single user/session connected.
I want to set apache in front and serve multiple connection while apache is keeping a single session with the IB Lite card in background no matter how sessions it have.
I tried ProxyPass but it doesn't seems to be a solution.
Is this possible?
View 1 Replies
View Related
Mar 20, 2015
I'm actually working on a project in wich one I use Zend Framework 2. In this project I have 4 websites. (this is require, I don't want to change it).
I have 1 Virtual Host for each website:
- com-mywebsite.com
- cp-mywebsite.com
- pos-mywebsite.com
- ap-mywebsite.com
Each Virtual Host redirect to the same folder and same file because everything is in the same project so same entry point (same index.php)
actually if I type each url in a browser, they all redirect to the same part of my project so I added some routes in ZF2 to access to one website and not another :
- com-mywebsite.com/com
- cp-mywebsite.com/cp
- pos-mywebsite.com/pos
- ap-mywebsite.com/ap
This is a quick and dirty fix because I also can access to the ap website with this url : com-mywebsite.com/ap
I'd like every website to be accessed from their root:
- com-mywebsite.com
- cp-mywebsite.com
- pos-mywebsite.com
- ap-mywebsite.com
And I don't want to display /something after it to access to the website even if after you can access to some other pages of each website.
View 1 Replies
View Related
Oct 3, 2013
We are using 4 apache and 8 weblogic.When little high load is coming on application (say 300 users), we are getting non-http response code (Non HTTP response code: org.apache.http.conn.HttpHostConnectException).And also all the load is generated from one single IP address.And we are using apache 2.2.
View 1 Replies
View Related
Nov 5, 2014
I need to configure multiple Apache Web Servers on redhat server. I have copied and extracted Apache 2.2 into redhat server and extracted but not able to install because I don't understand setting prefix. Please let me explain about prefix configuration and how to set it. At the same time I would like to know is it possible to setup 4 Apache Web Servers on same machine if possible then how to. Can we set up different versions of Apache HTTP Servers?
View 17 Replies
View Related
Sep 1, 2014
I've been having troubles with my website recently . I installed a forum software (MyBB), and the problem started happening shortly after. I've talked to a few site admins in the MyBB community but they all say that none of MyBB's scripts are capable of doing this.
Every single webpage i visit redirects me to a webpage which then has a redirect loop. I've removed all recent changes made to my website via FTP and restarted apache, but i'm still receiving the same error. I'm not quite sure what to do.
Link to my website: ript.onl
Screenshots: [URL] ....
Every single webpage does this. I dont have any .htaccess files around and i've checked a few config files for anything out of the ordinary, but haven't seen anything.
View 3 Replies
View Related
Oct 10, 2012
- Apache version : 2.2.21
- operating system : MAC OS Lion Server
- mod_ssl : 2.2.21
I have a certain area on a homepage which is protected by an .htaccess file. The code of the .htaccess file is the following:
Code:
AuthType Digest
AuthName "Password Required"
Options +Indexes
# code for HTTPS
RewriteEngine On
RewriteCond
%{SERVER_PORT} !^443$
RewriteRule (.*) https://%{SERVER_NAME}%{REQUEST_URI}
Require valid-user
Usually everything has been working fine with this .htaccess-file until today. There hasn't been any change on the system.
If you click on the hyperlink to the restricted area the login window appears where you need to type in your username and a password. After typing in these data the following message appears in the browser:
500 Internal Server Error
The server encountered an internal error or
misconfigruation and was unable to complete your request. (…)
The apache error log file contains the following message:
Request exceeded the limit of 10 sub request nesting levels due to probable configuration error.
Use 'LimitInternalRecursion' to increase the limit if necessary.
Use 'LogLevel debug' to get a backtrace.
The increase of the LimitInternalRecursion does not solve the problem. So I switched the LogLevel in the httpd.conf file from warn to debug and looked again on the entries of the error log.
The following appeared (I have replaced ip addresses, usernames and URL by xyz or <URL>) :
Code:
[error] [client xyz]
mod_digest_apple: Client is using a nonce not issued by this server for this context:/rb/Vorlesung/WS12/Downloads/, referer:
http:<URL>
[Code] ....
View 3 Replies
View Related
Jun 9, 2008
I cant decide between
Dual Processor Single Core
Dual Processor Single Core Xeon - 3.00GHz (Irwindale)
Or
Single Processor - Quad Core?
Single Processor Quad Core Xeon 3220 - 2.40GHz (Kentsfield)
My site needs "raw" processing power due to the applications it runs. ram (over 2 gb) and hdd are not that important to me.
could someone point me in the right direction.
View 3 Replies
View Related
May 14, 2009
I already mapped my IP address to a domain but when I tried to access http://myipaddress it still show the LX Admin Default page instead of my site. How can i fix that?
View 2 Replies
View Related
Feb 10, 2008
I'm trying to delete a domain from my Plesk 8.2.0 panel, but whenever I try to delete it, I get the following error:
ERROR: PleskFatalException
Unable to remove hosting: SiteAppManager: fwrite() failed: Empty error message from utility.
sappmng: Unable to getpwnam for user bollymayne
sappmng: User bollymayne not found
proc_close() failed: Empty error message from utility.
0: /usr/local/psa/admin/plib/class.PhDomain.php:290
PhDomain->reset(integer '0', boolean true, boolean false)
1: /usr/local/psa/admin/plib/class.BsDomain.php:313
BsDomain->reset(integer '0')
2: /usr/local/psa/admin/plib/class.BsDomain.php:307
BsDomain->delete(integer '0')
3: /usr/local/psa/admin/plib/class.BsDomain.php:540
mdeleteDomains(array)
4: /usr/local/psa/admin/plib/class.Manager.php:352
Manager->removeDomains(array)
5: /usr/local/psa/admin/htdocs/domains/removeDomains.php3:50
I've rebooted the server and Plesk and MySQL, yet I still seem to get the error. Any suggesstions?
View 12 Replies
View Related
Nov 13, 2008
I get this error in Plesk 8.6 when trying to delete a domain. I have tried various things from various forums, but they have failed:
Error: Unable to remove domains: Problems occured while removing domains: Delete database user failed: Object 'sys.queue_messages_210099789' does not exist or is not a valid object for this operation.
Earlier when I tried to remove it, it removed only physical hosting from the server (not the complete hosting account). When I try again to add physical hosting I get:
Error: DNSZone::Table:: select() failed: no such row in the table
Not sure if two errors are related. Can anyone help me out with this.
View 7 Replies
View Related
