Is it possible to set default value for 'Preferred domain' in domain hosting panel ?
For example we want for each new created domain + aliases to be redirected to www.domain.tld, so 'Preferred domain: www.domain.tld'
Is there a way to change the default value of the "Preferred domain" option in the hosting settings of domains in Plesk 11.5? When ever i create a new subscription/domain it just defaults to the value of "domain.ltd" and i have to go into the hosting settings and manually change it to "None". Is there a way i can set it to use the "None" option every time i create new subscriptions or domains?
View 14 Replies View RelatedHow can I configure a domain in plesk panel in order to show the domain with www (www.domain.tld)
Is the propertie "Preferred domain" in plesk 11.5 but in plesk 11.0.9 does not exist. How can I configure this?
If a create a subscription on a plesk Server through the API don't know how to specify the preferred domain and it's always set to domain.tld. I would like to set it to none for all.
My xml request:
Code:
<packet version="1.6.3.0">
<webspace>
<add>
[Code].....
After upgrade plesk 11 to 11.5 there is a new feature in domain hosting settings which is called "Preferred domain"
We can not change the state of Preferred domain. It always remain domain.tld When we try to change it to "none" panel says "Information: The settings were successfully updated."
When we check hosting settings again Preferred domain section is domain.tld . due to that reason we r having lots of diffuculties. Lots web page down due to web.config file has redirection.
I uploaded the default skeleton files into the management ppa server at /var/www/vhosts/.skel/0/
But when I am creating a new subscription the skeleton is still the default plesk skeleton, something changed from ppa 11 to 11.5 ??
How do I change the default country from the United States to Canada in the new Customer setup page?
View 1 Replies View RelatedHow to install a certificate for a brand ?
Let's say I have a brand B associate to a reseller R and a domain name domain.com.
When B sell a new subscription (with the associated webspace) it is available under sub.domain.com.
I would like to have a specific SSL certificate installed by default for every newly created webspaces by B under xxx.domain.co
How do we reset default permissions in virtual host directory in PPA.
I see some KB articles for Plesk Panel - but not sure we can use those.
Starting point: a working site using a shared IPv4, dedicated IPv6, and SSL. HTTP and HTTPS work, the latter only using SNI of course.
The good news: If I simply allocate an IP resource of 1 to a subscription it is pulled from the pool, assigned to the service node, assigned to the web site, DNS is updated, and the site is automatically changed to using a Dedicated IPv4 and Dedicated IPv6.
The bad news: visitors land on the default web site of the service node, with the default SSL certificate.
Other info: I can't ping the new IP, even though it shows in "ip a l" and /etc/sysconfig/network-scripts/ifcfg-eth0:0. [edited]
After the IP assignment, it is still installed, and /etc/httpd/conf/plesk.conf.d/ip_default/domainname.conf shows the new certificate is being used.
However, a second set of VirtualHost entries is created in server.conf for this IP for ports 80 and 443, with NameVirtualHost enabled on the new IP. The port 443 entry uses the default certificate. Apache's setup this default VirtualHost entry will override the web site configuration because Apache is listening on port 443 with the wrong cert.
If I go to "Change webspace settings" and toggle to Shared IPv4, Dedicated IPv6 the site works again via HTTPS, and Dedicated IPv4 and Dedicated IPv6 breaks it again. Setting the SSL cert to None and back again does not work.
Setting the SSL cert to None, changing to a dedicated IP, and enabling SSL results in the server being inexplicably inaccessible...browsers no longer connect to either the default site or the correct site, and I don't see any entries in the vhosts's logs.
I have recently deployed PPA with on nodes with hostnames on the serverroom.net.au domain, so management.serverroom.net.au, mail.serverroom.net.au etc. The DNS is currently hosted on a plesk server which will soon be migrated to PPA.
When I add the serverroom.net.au domain to PPA, I it fails at the sync task with an error saying that there are no A or AAA records for ns1.serverroom.net.au, even when these records exist in the external DNS. The same error occurs when I try to add the domain as a dns entry and switch to internal...
im trying crate small remote application for manage plesk planel. and need xml api command simile to this :
<?xml version="1.0" encoding="UTF-8"?>
<packet version="1.5.0.0">
<server>
<set>
<result>
<status>ok</status>
</result>
</set>
</server>
</packet>
for get all domain present on my server !
How do we disable email on the domain entirely? The client is hosting email externally - the offered spam filtering is wholely inadequate and we're seeing a few of these happening - to the point I'm considering offering externally hosted email plans anyway - but back to the problem - I need to delete the mailboxes and then disable mail - and then remove the DNS records for webmail etc - but can't seem to find how to turn off locally hosted email for a domain.
View 11 Replies View RelatedI recently set up an eas and autodiscover sub-domains on my main domain (eg myserver.com) running Plesk, Webmail etc, and is the default website for the ip.
So it should be..
myserver.com (not SNI default for IP)
eas.myserver.com (SNI)
autodiscover.myserver.com (SNI)
But I notice the actual default site (non SNI) is the sub-domain autodiscover.myserver.com.
I checked in
Plesk -> Tools & Settings -> IP Addresses
and that was set correctly, so I tried to change it and back again, then...
/opt/psa/admin/bin/httpdmng --reconfigure-all
Neither worked.
I'm running Ubuntu 12.04.5 LTS and Plesk 11.5.30 #48 (the latest MU)
When typing my ip it used to go to Plesk landing page.
Then through the option: server > tools > IP Addresses, I changed the "Default site" to my main domain, however, it just points to the main page, and not changes the url to the domain (keeps the ip in title, and not show the domain url).
How to make it forwarded to the domain (show it in the address bar), and not just to the index page?
A client is trying to add a domain that was accidentally deleted when he deleted an account, but now when adding the domain again it is not adding it. The task in CP fails. If I manually try delete the domain I get this error:
[root@ns1 bin]# ./domain --remove domain.com
An error occurred during domain removal: Unable to remove domains: Package with UID '8972ffa7-50fb-4dbc-8639-bf08caee425d' not found.
In mysql I see the domain is still in the db so something did not go right when the client deleted the hosting package, and now it is in limbo as the domain cannot be re-added.
The issue is effectively that we created a subscription with the domain. Which has since been deleted. The domain now wants to be added to another subscription on the account.
The domain can be seen in both the PBAS and PPA domains and everything seems to point at the right subscriptions. I presume all this is right as we have other domains quite happily added to the subscription in a similar manner.
I'm not really wanting to rip out the entire domain from the system as we spent the morning putting in 132 records, due to a bizarre lack of bulk insertion tools.
I have found through the KB the way to do it server wide but I was wondering if there was still a way to reset default domain permissions per domain.
/usr/local/psa/bin/repair --restore-vhosts-permissions - to restore all domain permissions.
Is it possible to know how can I setup the DKIM default for each domains without manually activate it each time?
View 6 Replies View RelatedI've just purchased a VPS with Ubuntu 14.04 and Plesk 12 Web Admin Edition. I will use the vps to host just one domain/website. The first time I access Plesk, it asks for some info and first of all it asks form my domain. The default value is localhost.localdomain. Should I leave the default value or should I enter my domain (let's say example.com)?
View 4 Replies View RelatedI have a domain hosted in a external pool of servers.I must set a dns record for www.domain.tld and domain.tld (without www). It must be done using cname.The www.domain.tld , works fine.
Ex:www.domain.tld IN CNAME xyz.otherdomain.tld.
But I am not able to set a DNS record for a root of domain.
Ex: domain.tld IN CNAME xyz.otherdomain.tld.
neither domain.tld IN CNAME www.domain.tld.
The PPA didn't allow me.It say that the host field is mandatory.
I have a full mail node and I have to move some domains on a different node without losing data . Is possible with PPA?
View 3 Replies View RelatedI added a mail resource and a database resource to the "branding" service template, and made sure the provisioning attributes match up to an actual node. I also made sure that under the resources for the branding template the "Branding Hosting (management node)" -> "Number of MySQL databases" is "1" and the "MySQL Database" is unlimited.
Ive made a primary branded domain assigned to the administrator account. When I then login to the account, I see that the mail resource is added and I can add email accounts. However, the database resource does not seem to be activated. Indeed, if I try to add a application in the domain that requires a database, it fails because there is not a database resource available.
The database server is a separate node from the management server.
I do not see any running tasks waiting, and the events log doesnt mention anything about provisioning a database.
Separately but tangentially related, once the account is up, I dont see it listed as an active subscription under the service template. I should see it there, right?
where i can change the default plesk page when a domain has been suspended or disable? I like to change it to my custom page. Is there a way?
View 5 Replies View RelatedWhen I create a CNAME record for domain, and then trying to load it, it goes to default website. It was working fine before, all old CNAME records are working fine.
Tried reconfigure-all but it doesn't fix the problem. I'm using 11.5.30 Update #44
i have a domain registered within PLESK having the same name as the server itself. After a short period of time the domain shows up the PLESK default page instead of the original content located in the vhost httpdocs directory.
To restore the content it's possible to deactivate and re-activate the domain from the customers control panel. But after an amount of time the default page comes back.I first recognized the error after the update to PLESK 12.
I have several domains configured in my Plesk, and one of them is set as the "Detault site" under Home >> Tools & Setings > IP address management.This has the unpleasant side effect that any domain I point to this IP renders content from the Default site unless it's setup. How can I configure the default site to render content from only one domain?
View 1 Replies View RelatedHow can I configure "Backup manager" to clear checkbox "During the backup process, website visitors will be redirected to the custom error document page with the search engine friendly 503 HTTP code" for default (for subscribers, customers, etc.)
View 1 Replies View RelatedI'm receiving the following error whenever I try to edit any hosting settings
Unable to determine preferred php handler id
I've found the article for this on the Linux KB (which states to raise a support ticket) but nothing on Windows.
I am running Windows Server 2012 R2 with Plesk 12.0.18
I am trying to install Automation, and I keep getting an error after the "Getting SELinux" step, here is a log of the process so far:
Code:
[INFO]: Checking current user privileges...
[INFO]: Checking critical environment requirements...
[INFO]: Determining OS parameters...
[INFO]: Detected OS: CentOS-5-x86_64
[INFO]: Getting SELinux state...
[ERROR]: Unexpected error: ''
[Code] ....
I have tried running the installation on a different server and the same issue came up...
I am installing plesk automation on centos 6.5 using this command on a fresh system
./ppa_installer --password some_password --admin_email some_email
and get the following error.
[LOGTEE]: Error Downloading Packages:
[LOGTEE]:
[LOGTEE]: libuuid-2.17.2-12.18.el6.i686: failure: Packages/libuuid-2.17.2-12.18.el6.i686.rpm from base: [Errno 256] No more mirrors to try.
Looks like some lib is not found in the mirrors.
