Plesk 11.x / Linux :: Changing Default Site When Domain Suspended?

Jul 24, 2014

where i can change the default plesk page when a domain has been suspended or disable? I like to change it to my custom page. Is there a way?

View 5 Replies


ADVERTISEMENT

Plesk 11.x / Linux :: Domain CNAME Redirects To Default Site?

May 16, 2014

When I create a CNAME record for domain, and then trying to load it, it goes to default website. It was working fine before, all old CNAME records are working fine.

Tried reconfigure-all but it doesn't fix the problem. I'm using 11.5.30 Update #44

View 1 Replies View Related

Plesk 12.x / Linux :: Changing Default Certificate?

Sep 30, 2014

My System:
Ubuntu 12.04
Plesk 12.0.18 Update #18
Only Webserver no mail

What I want:
I have an old sha1 certificate and I would change this for the whole server.

What I have done so far:
I have already uploaded the new sha256 certificate with a new private key to plesk (I can not simply replace the old one, plesk does not allow me to upload a new private key).

Then I set the new certificate as standard certificate and pressed the "secure pannel" button.

After that the panel uses the new certificate.

Then I set in "Tools & Settings -> IP Addresses" on both IP addresses the new certificate.

Reboot

But now the "Tools & Settings -> SSL Certificates" shows me that the old certificate is still used 2 times somewhere. But the Interface does not show where it is used. How can I find out where this certificate is used? I want to remove the old certificate from the server.

View 2 Replies View Related

Plesk 11.x / Linux :: Domain Suspended And Can't Reactivate

Jun 14, 2014

A domain has become suspended for some unknown reason so the client's site is down (we're getting the Web Server's Default Page). The account limits have not been exceeded and it appears there's no logical reason why this should have happened. In any case I've tried changing the status within Plesk 11 but without success. I've also tried to access via SSH but I'm getting an access denied message even through the password being entered is correct.

View 1 Replies View Related

Plesk 11.x / Linux :: Changing Spam Assassin Default Level For Each Account?

Aug 30, 2013

Is there not a way to change the default for the spam assassin level when creating a new mail account and still have the ability to change it individually if needed?

I changed it in the spamassassin config file /etc/mail/spamassassin/local.cf and in the server mail settings, but it still reads 7 when I create a new account and go to turn on the spam filtering. Does this value come from the db?

I can write a script making api calls? but surely there is a way to change the defaults and still have the ability to change these from the default for each account if needed?

View 4 Replies View Related

Plesk 12.x / Linux :: Domain Stuck On Suspended Even After Unsuspending

Feb 2, 2015

Transferred plesk server to another.. Now customer domain is stuck on suspended and does not want to unsuspend even after I entered the command and enabled active on plesk../usr/local/psa/bin/domain -u example.com -status enabled

View 1 Replies View Related

Plesk 11.x / Linux :: Selected Site On Default IP Via HTTPS

Jun 16, 2014

I have Plesk 11.5 installed on my server. There are about 30 sites on the same shared IP address. I need to set up a site to be accessible via https://<ip-address-of-the-server> . According to the documentation I went to Setting -> IP Addresses and selected the desired site from the drop down. Now http://<ip-address-of-the-server> (note, 80th port) works like a charm. Unfortunately https:// displays only the first page of the selected site; all CSS, JS and other files are not found (404).

I did some research and found that Nginx forwards the requests to Apache for all the PHP files and tries to handle all the static files by itself (what is expected and correct). But it looks like that there is no special configuration for nginx which would specify where to get these static files for the IP address, and Nginx just uses the first loaded config (started from b in my case).

I temporary resolved this issue by modifying the last_nginx.conf for the desired domain this way: listen XX.XX.XX.XX:443 default_server ssl;

Note I added "default_server" directive. Of course it would be erased on each reconfiguration of the config files, but as for now I do not see how I can put it in custom nginx.conf or on the server servel level. I reckon Plesk should include the directive in the file the same way as it produces last_httpd_ip_default.conf Apache config for the selected domain. It looks to be an easy fix on the template level, may be I will do it later, but for now this is just the bug report.

View 2 Replies View Related

Plesk 12.x / Linux :: Default Site For Disabled Subscriptions

Jul 9, 2015

If you would disable a subscription and reloaded that domain name. You would be redirected to a default subscription. How can i change this default landing page?

View 2 Replies View Related

Plesk 11.x / Linux :: All Site Showing Default Page After Upgrading From 10.4.4 To 11.0.9

Jul 14, 2012

I upgraded from 10.4.4 to 11.0.9 and saw no errors in the process, everything was fine. However when I checked the sites after, all of them (including sub-domains) were showing the default domain page. All the files are still there no problem, and as a test I deleted a subdomain a recreated it and it worked fine.

I have a feeling it's something to do with IP addresses (I currently have two set up - most sites use one and about only 5 use the other) as going to the subscription and changing the IP address over to the other one then back to the original seems to make the site show up for most sites. I can't do this on all sites though - any commands to reconfigure everything and get it all back in to place?

View 19 Replies View Related

Plesk 12.x / Linux :: Default Placeholder Page Redirects To Another Site?

Jan 13, 2015

I disabled a site, and instead of getting the default placeholder when visiting the domain, I get another web site that I host.

[URL]

View 2 Replies View Related

Plesk 11.x / Linux :: Event Handler To Change Default Permissions Of Skeleton Site

Mar 1, 2015

I am running Plesk 11.5.30 on CentOS and trying to change the default permissions of the /httpdocs folder and the skeleton site that is in .skel/0/httpdocs that appears when a domain is created. I have failed to find the event that I need to use to trigger the command.

#!/bin/bash
chmod -R g+rwx "/var/www/vhosts/${NEW_DOMAIN_NAME}/httpdocs"​

Some research suggested using the 'physical hosting created' but there is no option for this in 11.5.30.

View 3 Replies View Related

Plesk 11.x / Linux :: Wrong Default Domain?

Dec 5, 2014

I recently set up an eas and autodiscover sub-domains on my main domain (eg myserver.com) running Plesk, Webmail etc, and is the default website for the ip.

So it should be..

myserver.com (not SNI default for IP)
eas.myserver.com (SNI)
autodiscover.myserver.com (SNI)

But I notice the actual default site (non SNI) is the sub-domain autodiscover.myserver.com.

I checked in

Plesk -> Tools & Settings -> IP Addresses

and that was set correctly, so I tried to change it and back again, then...

/opt/psa/admin/bin/httpdmng --reconfigure-all

Neither worked.

I'm running Ubuntu 12.04.5 LTS and Plesk 11.5.30 #48 (the latest MU)

View 1 Replies View Related

Plesk 11.x / Linux :: Pointing IP To Default Domain In 12.0.18

Jan 31, 2015

When typing my ip it used to go to Plesk landing page.

Then through the option: server > tools > IP Addresses, I changed the "Default site" to my main domain, however, it just points to the main page, and not changes the url to the domain (keeps the ip in title, and not show the domain url).

How to make it forwarded to the domain (show it in the address bar), and not just to the index page? 

View 1 Replies View Related

Plesk 12.x / Linux :: Resetting Default Permissions Per Domain

Dec 10, 2014

I have found through the KB the way to do it server wide but I was wondering if there was still a way to reset default domain permissions per domain.

/usr/local/psa/bin/repair --restore-vhosts-permissions - to restore all domain permissions.

View 1 Replies View Related

Plesk 11.x / Linux :: 11.0.9 - Setup DKIM Default For Each Domain

Oct 3, 2013

Is it possible to know how can I setup the DKIM default for each domains without manually activate it each time?

View 6 Replies View Related

Plesk 12.x / Linux :: Leave Default Value Or Should Enter Domain

Feb 9, 2015

I've just purchased a VPS with Ubuntu 14.04 and Plesk 12 Web Admin Edition. I will use the vps to host just one domain/website. The first time I access Plesk, it asks for some info and first of all it asks form my domain. The default value is localhost.localdomain. Should I leave the default value or should I enter my domain (let's say example.com)?

View 4 Replies View Related

Plesk 11.x / Linux :: Change Default Value Of Preferred Domain

Sep 16, 2013

Is there a way to change the default value of the "Preferred domain" option in the hosting settings of domains in Plesk 11.5? When ever i create a new subscription/domain it just defaults to the value of "domain.ltd" and i have to go into the hosting settings and manually change it to "None". Is there a way i can set it to use the "None" option every time i create new subscriptions or domains?

View 14 Replies View Related

Plesk 12.x / Linux :: Domain With Servername Always Falls Back To Default Page

Oct 27, 2014

i have a domain registered within PLESK having the same name as the server itself. After a short period of time the domain shows up the PLESK default page instead of the original content located in the vhost httpdocs directory.

To restore the content it's possible to deactivate and re-activate the domain from the customers control panel. But after an amount of time the default page comes back.I first recognized the error after the update to PLESK 12.

View 2 Replies View Related

Plesk 11.x / Linux :: How To Disable Wildcard Catch All For Master Default Domain

Aug 6, 2014

I have several domains configured in my Plesk, and one of them is set as the "Detault site" under Home >> Tools & Setings > IP address management.This has the unpleasant side effect that any domain I point to this IP renders content from the Default site unless it's setup. How can I configure the default site to render content from only one domain?

View 1 Replies View Related

Plesk Automation :: Adding Dedicated IP Breaks Site (visitors Land On Default Site)

Apr 14, 2015

Starting point: a working site using a shared IPv4, dedicated IPv6, and SSL. HTTP and HTTPS work, the latter only using SNI of course.

The good news: If I simply allocate an IP resource of 1 to a subscription it is pulled from the pool, assigned to the service node, assigned to the web site, DNS is updated, and the site is automatically changed to using a Dedicated IPv4 and Dedicated IPv6.

The bad news: visitors land on the default web site of the service node, with the default SSL certificate.

Other info: I can't ping the new IP, even though it shows in "ip a l" and /etc/sysconfig/network-scripts/ifcfg-eth0:0. [edited]

After the IP assignment, it is still installed, and /etc/httpd/conf/plesk.conf.d/ip_default/domainname.conf shows the new certificate is being used.

However, a second set of VirtualHost entries is created in server.conf for this IP for ports 80 and 443, with NameVirtualHost enabled on the new IP. The port 443 entry uses the default certificate. Apache's setup this default VirtualHost entry will override the web site configuration because Apache is listening on port 443 with the wrong cert.

If I go to "Change webspace settings" and toggle to Shared IPv4, Dedicated IPv6 the site works again via HTTPS, and Dedicated IPv4 and Dedicated IPv6 breaks it again. Setting the SSL cert to None and back again does not work.

Setting the SSL cert to None, changing to a dedicated IP, and enabling SSL results in the server being inexplicably inaccessible...browsers no longer connect to either the default site or the correct site, and I don't see any entries in the vhosts's logs.

View 6 Replies View Related

Plesk 11.x / Windows :: Domain Is Suspended Every Day By Backup And Not Resumed

Jan 16, 2014

"Domain is suspended every day by backup and not resumed" - [URL] ....

How can I configure for default this setting "Un-check the Suspend domains until backup task is completed option in the scheduled backup task properties" ?

View 2 Replies View Related

Plesk 11.x / Linux :: Website Files Copied To Another Domain But Database Remains On Old Site

May 18, 2014

When I use website copy function the website files are copied to another domain but the database remains on old site. I use this function to move the website from devel state to the production state. All sites work fine but when i schedule the backups all databases are saved on old domain. How to move the database on production domain?

View 1 Replies View Related

Plesk 11.x / Linux :: Domains Suspended After Backup

Nov 24, 2014

A load of my domains were backed up last night and they have been suspended ever since. I have tried the following:

1. Domains -> Backup Manager -> Back Up
2. tick off the box to the left of "Suspend domain until backup task is completed"
3. Tick off the box to the left of "Domain configuration"
4. Click "Back Up".

...That did not fix it

I've tried suspending/activating the domains, but I just receive "Error: Unable to activate the domain: The domain is suspended."

I've also logged into MySQL PSA database and run "update domainaliases set status=0 where status=2;" ...That did not fix it

I have checked and /var/www/vhosts/domain.com/conf/httpd.include file is missing.

I have also run the following command: /usr/local/psa/admin/sbin/httpdmng --reconfigure-all

That did not fix it

if I try "/usr/local/psa/bin/domain -u mydomain.com -status enabled" I receive the following error message...

An error occurred during domain update: Turn on domain failed: /usr/share/tomcat5/conf/server.xml:1451: parser error : Extra content at the end of the document vice>
tomcatmng: Unable to parse tomcat server config /usr/share/tomcat5/conf/server.xml

I'm on the latest 11.0.9 Update #63

View 1 Replies View Related

Plesk 12.x / Windows :: Changing IP Domain?

Dec 8, 2014

Everytime I change the IP o a domain in plesk the web page does not work and it appears the default parallels plesk web page.

View 1 Replies View Related

Plesk 11.x / Windows :: Setting Default Site On Dedicated IP - Unable To Reconfigure Web Server

Sep 2, 2014

Code:

Error: Unable to reconfigure web server. websrvmng failed: Site MailEnable WebMail does not exist at IIS7WebSites::get() In IIS7NativeProvider module Exception type: System.Exception at IIS7WebSites.get(IIS7WebSites* , auto_ptr* , Int64 id, basic_string,std::allocator >* idnName)
Windows Server 2012
Plesk 11.0.9 Update #62
Note: Recently migrated from Plesk 9.2

Trying to set Default Site for a Dedicated IP Address.

I go to Subscription, then to domain > Change Hosting Settings, select dedicated IP address and OK, works fine. Site goes to Default Plesk Page.

Go to Tools & Settings, IP Addresses > Select the dedicated IP address I set above. Change Default Site to site above. Click Ok.

I get the error message above and nothing changes.

I looked on my IIS Server and MailEnable's Webmail is installed under the Default Website.

I have another Dedicated IP on this server and it has a default site on it working properly, but it was set up on the old site and it was configured as part of the Migration using Migration Manager.

I tried deleting the IP address and adding it back in. That didn't change anything. I also tried running: "%plesk_bin%websrvmng.exe" –reconfigure-webmail since that came up under someone else's issue when searching the web and that .exe is what's throwing the error.

View 1 Replies View Related

Plesk Automation :: Default Value For Preferred Domain?

Mar 14, 2014

Is it possible to set default value for 'Preferred domain' in domain hosting panel ?

For example we want for each new created domain + aliases to be redirected to www.domain.tld, so 'Preferred domain: www.domain.tld'

View 2 Replies View Related

Changing The Default CPanel Logo

Nov 9, 2008

How do you change the default cPanel logo.

Like, when you create an account, the clients cPanel says:
[url](on the top).

I was wondering, any way to change that..not for a single account but all of them..kinda so when it creates a account it actually puts a different image.

View 4 Replies View Related

Plesk 11.x / Windows :: Changing Plan For A Domain / Does Not Update Website Hosting Settings

Jul 3, 2014

OSMicrosoft Windows Server 2008 R2 Service Pack 1
Panel version11.5.30 Update #47

We have a few hosting plans setup with different "allowances" for each.The website permissions allow basic html and PHP.In Windows Advanced: The website settings allow for html, php, asp and asp.net

When we change a Basic Hosting plan to Windows Advanced using "Change Plan", it will reassign the subscription/domain to use the new plan, but it will not add-on the extra features in Hosting Settings.

View 1 Replies View Related

Changing Default CPanel Error Pages

Nov 9, 2009

to change the default cPanel account error pages. For example, default accounts have the following 404 error:

Quote:

Not Found

The requested URL * was not found on this server.

Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

So what I want to do is be able to change this page but I dont know where in the server it is located.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved