I've just purchased a VPS with Ubuntu 14.04 and Plesk 12 Web Admin Edition. I will use the vps to host just one domain/website. The first time I access Plesk, it asks for some info and first of all it asks form my domain. The default value is localhost.localdomain. Should I leave the default value or should I enter my domain (let's say example.com)?
View 4 RepliesI recently set up an eas and autodiscover sub-domains on my main domain (eg myserver.com) running Plesk, Webmail etc, and is the default website for the ip.
So it should be..
myserver.com (not SNI default for IP)
eas.myserver.com (SNI)
autodiscover.myserver.com (SNI)
But I notice the actual default site (non SNI) is the sub-domain autodiscover.myserver.com.
I checked in
Plesk -> Tools & Settings -> IP Addresses
and that was set correctly, so I tried to change it and back again, then...
/opt/psa/admin/bin/httpdmng --reconfigure-all
Neither worked.
I'm running Ubuntu 12.04.5 LTS and Plesk 11.5.30 #48 (the latest MU)
When typing my ip it used to go to Plesk landing page.
Then through the option: server > tools > IP Addresses, I changed the "Default site" to my main domain, however, it just points to the main page, and not changes the url to the domain (keeps the ip in title, and not show the domain url).
How to make it forwarded to the domain (show it in the address bar), and not just to the index page?
I have found through the KB the way to do it server wide but I was wondering if there was still a way to reset default domain permissions per domain.
/usr/local/psa/bin/repair --restore-vhosts-permissions - to restore all domain permissions.
Is it possible to know how can I setup the DKIM default for each domains without manually activate it each time?
View 6 Replies View RelatedIs there a way to change the default value of the "Preferred domain" option in the hosting settings of domains in Plesk 11.5? When ever i create a new subscription/domain it just defaults to the value of "domain.ltd" and i have to go into the hosting settings and manually change it to "None". Is there a way i can set it to use the "None" option every time i create new subscriptions or domains?
View 14 Replies View Relatedwhere i can change the default plesk page when a domain has been suspended or disable? I like to change it to my custom page. Is there a way?
View 5 Replies View RelatedWhen I create a CNAME record for domain, and then trying to load it, it goes to default website. It was working fine before, all old CNAME records are working fine.
Tried reconfigure-all but it doesn't fix the problem. I'm using 11.5.30 Update #44
I am trying to block this whole range of IPs, all that begin with 66.249. How is is that done?
View 1 Replies View Relatedi have a domain registered within PLESK having the same name as the server itself. After a short period of time the domain shows up the PLESK default page instead of the original content located in the vhost httpdocs directory.
To restore the content it's possible to deactivate and re-activate the domain from the customers control panel. But after an amount of time the default page comes back.I first recognized the error after the update to PLESK 12.
I have several domains configured in my Plesk, and one of them is set as the "Detault site" under Home >> Tools & Setings > IP address management.This has the unpleasant side effect that any domain I point to this IP renders content from the Default site unless it's setup. How can I configure the default site to render content from only one domain?
View 1 Replies View RelatedI recently updated servers and noticed that Coldfusion 11 is not longer supported by plesk, dissapointing, but I can understand that its not used enough for plesk's attention. OK.
If plesk is going to no longer support it, how can I get it to leave Coldfusion alone and to stop applying permissions to the X:Coldfusion11 folder? If I have to connect Coldfusion to each IIS site, thats no big deal, but just want to make sure that I am safe from plesk breaking things.
Is it possible to set default value for 'Preferred domain' in domain hosting panel ?
For example we want for each new created domain + aliases to be redirected to www.domain.tld, so 'Preferred domain: www.domain.tld'
How can I configure "Backup manager" to clear checkbox "During the backup process, website visitors will be redirected to the custom error document page with the search engine friendly 503 HTTP code" for default (for subscribers, customers, etc.)
View 1 Replies View RelatedImpossible to find a way to show, by default, all domains and websites...
When I log on the Plesk Admin, I come first on a list of websites and domains, but they are not «all» listed. I have to go to the full bottom of the page to click on «Show all».
I didn't find a preference or anything else to change that, and I don't understand why all domains are not listed.
I am replacing the default certificate in Plesk so that customers do not get a certificate warning when visiting the panel login page.
I've created the certificate in the "SSL Certificates" section made it default and used it to secure Plesk. However I've still got all the existing domains using the old default certificate, how can I do a mass changeover so that all existing domains are now using the new certificate?
I've updated the IP's to use the new certificate. When I go to "SSL Certificates" in "Tools and Settings", it seems that there are some domains now using the new certificate but quite a lot of the other are still not, how can I get these over too?
My System:
Ubuntu 12.04
Plesk 12.0.18 Update #18
Only Webserver no mail
What I want:
I have an old sha1 certificate and I would change this for the whole server.
What I have done so far:
I have already uploaded the new sha256 certificate with a new private key to plesk (I can not simply replace the old one, plesk does not allow me to upload a new private key).
Then I set the new certificate as standard certificate and pressed the "secure pannel" button.
After that the panel uses the new certificate.
Then I set in "Tools & Settings -> IP Addresses" on both IP addresses the new certificate.
Reboot
But now the "Tools & Settings -> SSL Certificates" shows me that the old certificate is still used 2 times somewhere. But the Interface does not show where it is used. How can I find out where this certificate is used? I want to remove the old certificate from the server.
I think it is possible, but just to be sure...
Default document root is:
var/www/vhosts/www.mysite.com/httpdocs/
Can I change it to:
var/www/vhosts/www.mysite.com/web/
A simple "yes" or "no" will do...
Did 12.0.18 comes with default maria DB instead of mysql ??
View 2 Replies View RelatedWhen a customer use the wordpress auto installation tool, all work ok.
But, when the customer try to install wordpress manually (Uploading by FTP), it returns different permissions errors.
Example: "wp-config.php" cant write .
I compared the permissions of both vhosts (WP-Auto-install and WP-Manually-Install), and have totally different permissions.
WP-Auto-installed : /httpdocs = 770
WP-Manually : /httpdocs = 750
How I can set permissions to 770 by default when create a vhost? to avoid the customer having to do it manually.
I have suddenly lost all of the websites on the plesk panel server 12.0.18. One of the domains was being used to spam and so I started blocking stuff and removing some of the offending files and folders and the spamming stopped.
However it got to a point where I needed to restart the server and although it was working before the restart, once I did restart it it stopped working. All domains are loading nothing and the access_log looks like nginx or FastCGI is trying to redirect the page somewhere. The bootstrapper repair log file states:
"Details: PHP Warning: include_once(Template/Writer/Webserver/Apache.php): failed to open stream: No such file or directory; File: /usr/local/psa/admin/plib/Loader.php, Line: 97"
I changed the DNS parameters of the default domain service plans to slave.
But where can I set the default master server, I didn't find it.
i'm running 12.0.18#34 on PCS dedicated server. i recently discovered that some of the default jails on fail2ban that is shipped with Plesk 12 were not working correctly. Let me explain what i mean. For instance, the plesk-panel jail. The logs were parsed correctly, the command was successfully appended in iptables list, the fail2ban log was updated. Still, the intruder was not blocked. I kept reading "already banned" on the fail2ban.log but actually there was no blocking.
After some checks, i found out that fail2ban default configuration states SSH as default blocking port.
that means, the block was working but only for ssh hits. thus the plesk-panel admin page hits were passing through.
since i added port=http,https on jail.local > plesk-panel and did it a restart on fail2ban service, only then did it start to actually block incoming hits.
I think this should be verified by programmers group and maybe include a fix in some future minor update.
My server currently installed plesk 12 , I need to change wordpress default language ( default English )
Which aps table to edit language.
My default certificate expired recently. I created a new certificate "default certificate 2".
I used this certificate for "Secure the Panel"
I went to "Tools and Settings" -> "IP addresses" and made this certificate the default for all the IPs. On the page "Tools and Settings" -> "SSL certificates", it says Used: 0 next to "default certificate".
But when I try to delete it, it tells me: "Error: Unable to remove certificates: one or several certificates are assigned to the IP addresses/domains."
Is there anywhere I can check where this certificate is still used?
I have Plesk 11.5 installed on my server. There are about 30 sites on the same shared IP address. I need to set up a site to be accessible via https://<ip-address-of-the-server> . According to the documentation I went to Setting -> IP Addresses and selected the desired site from the drop down. Now http://<ip-address-of-the-server> (note, 80th port) works like a charm. Unfortunately https:// displays only the first page of the selected site; all CSS, JS and other files are not found (404).
I did some research and found that Nginx forwards the requests to Apache for all the PHP files and tries to handle all the static files by itself (what is expected and correct). But it looks like that there is no special configuration for nginx which would specify where to get these static files for the IP address, and Nginx just uses the first loaded config (started from b in my case).
I temporary resolved this issue by modifying the last_nginx.conf for the desired domain this way: listen XX.XX.XX.XX:443 default_server ssl;
Note I added "default_server" directive. Of course it would be erased on each reconfiguration of the config files, but as for now I do not see how I can put it in custom nginx.conf or on the server servel level. I reckon Plesk should include the directive in the file the same way as it produces last_httpd_ip_default.conf Apache config for the selected domain. It looks to be an easy fix on the template level, may be I will do it later, but for now this is just the bug report.
I am noticing that several of my users are wiping out their user root folders ( logs, error docs, etc...) when they fail to use '/httpdocs/' as the root directory when publishing with FTP.
I fixed this by editing the proftpd.conf to use ~/httpdocs/ as the DefaultRoot folder ( instead of just ~/ ).Would it be safer(better) to go through all the ftp users and make the home directory '/httpdocs/' instead of '/' in the admin UI? If yes, what is the best way to do a mass update of this setting for multiple users ( multiple domains ) ?
Is there a way to set the php-handle for all domais as "fastcgi".
At the moment when i create a domain, it will be run as "apache".
I like to change it to "fastcgi". I know there is way, to change it in the databases, but i forget where was it...
If you would disable a subscription and reloaded that domain name. You would be redirected to a default subscription. How can i change this default landing page?
View 2 Replies View RelatedI've seen a number of exploit attemps on the default website which I believe has come via direct access via ip address i.e http://xxx.xxx.xxx.xxx.I have tried to block with .htacess but it seems to be being ignore (possibly by parallels or nginx configuration).how I can block access to the default site to all but 127.0.0.1, server external ip and my ip?
View 19 Replies View RelatedIt seems that, since Plesk 12.x, many usual ports are now closed by default (ex. port mysql 3306, port 9000...)
Clients are not informed...
how can we re-open these ports ?