I have upgrade plesk to 12 version and after upgrade all the domains that have more than 2048 MB on the server are shown as 2048 MB.
If i go on the domain statistic the tab the total disk usage is 2048.1 MB but on the graph the services disk usage are shown correctly.
I have 2 print screen.
today i get a vps from lime, and i try to create a vps
but when i try to enable vps i get this message :
Could Not Start Vps, Reason: vzquota : (error) Quota getstat syscall for id 110: Inappropriate ioctl for device: vzquota init failed [3]:
and the disk usage not display properly:
After upgrade plesk 11 to 11.5 there is a new feature in domain hosting settings which is called "Preferred domain"
We can not change the state of Preferred domain. It always remain domain.tld When we try to change it to "none" panel says "Information: The settings were successfully updated."
When we check hosting settings again Preferred domain section is domain.tld . due to that reason we r having lots of diffuculties. Lots web page down due to web.config file has redirection.
I have a problem with on domain. The domain is the "main-domain" of the customer but it is not shown in the overview /smb/web/view
Not with the User logged in and not with the admin logged in.
But I can change setting, when I call the detail-page manually: /smb/web/overview/id/d:26
I tried to lock/unlock the domain/account, but nothing worked.
I could not see any mistakes in the database.
Deleting and adding the domain would be a trick, but because of having many domains/subdomains and dns-entries this is not my first choice.
I'm starting a webhosting business in the next few months (working on the panel), and was wondering what is the best method to limit the amount of disk usage the user can use? I know about Disk Quota, but that would be a pain to use. Is there anything built into IIS7?
Also, is it possible to use a SQL 05 DB for FTP user accounts with IIS7? If not, is there any other way to have FTP accounts *without* having to create a windows user account?
After click webadmin its shows a security warning conform box as following on Firefox ...
Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party.
Are you sure you want to continue sending this information?
And if click " OK" the page display " Server not found " error
[URL] ...
Microsoft Windows Server 2012 Panel version 11.5.30 Update #47
The Webadmin app does not install all the folders it needs to run correctly. I have downloaded and repaired the install as noted in [URL] ..... This did not repair the install. All the folders that are needed in the application directory in the vhosts folder are still missing. I have attached the install log.
I have been a Plesk Panel user for several years and I found PPA very interesting because of its great scalability.
It has been time consuming to figure it out how PPA handles several Plesk Panel aspects.
Does PPA has support for MailEnable disk usage calculation? If it does, where? and how often does it collect disk usage info from Mail Service Node??
I'm running Plesk 12.0.18 on Centos 7, recently I've got emails from backup service stating that it could not complete the backup due to insufficient space available on disk. Normally I have plenty of disk space available so I check the disk using the command
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/root 20G 2.3G 17G 13% /
/dev/md2 91G 82G 4.4G 95% /var
it seems that /var has been growing up a lot,
but if I run the command
du -sh /var
I get a total size of 5.7G (not 82G as stated before)
is Plesk calculating the wrong size or it's me using the wrong commands?
I'm on PPA 11.5 MU#2 (Should upgrade to MU#3 soon). My problem is that the Usage of Disk Space for all my customers subscriptions are not calculated. I've run the daily maintenance script (which it actually runs periodically), but there's no update on the display.
View 3 Replies View RelatedIt appears that my clients disk space usage calculation is including admin full server FTP backups that I am doing.
This shouldn't be the case, these full server backups that I'm doing should not count towards my clients plans disk space allowance.
I migrated from one server running Plesk 10.4.4 Update #59 to a new server running Plesk 11 which I then updated to 12.0.18 Update #32. Since moving to Plesk 12 the "Notify when disk space/traffic usage reaches" emails have been being sent to our customers set up on the server whereas previously they were sent to the server admin email address.
Is this a change with this version?
Okay guys, a quick question for all the gurus out there. I'll admit I'm a bit embarassed posting such an easy question, but give a guy a break, I've been using managed servers for god knows how long and I've finally decided to take a dive into administration. Everything is firewalled and secured properly, I'm just having trouble getting the ServerAlias to work right.
What happens is I go into my browser and enter in [url]walaa! It works.
Now, when I enter in [url], it does not resolve.
I have checked with "dig" the domain settings and it looks as though all of the nameservers are set up fine, this is an apache problem. I'm running apache 2.2 on Ubuntu 7.10 for all those who are interested.
Here is my etc/apache2/sites-available/domain.com:
<VirtualHost *:80>
# Admin email, Server Name (domain name) and any aliases
ServerAdmin webmaster@domain1.com
ServerName domain.com
ServerAlias www.domain.com
# Index file and Document Root (where the public files are located)
DirectoryIndex index.html
DocumentRoot /home/demo/public_html/domain.com/public
# Custom log file locations
LogLevel warn
ErrorLog /home/demo/public_html/domain.com/logs/error.log
CustomLog /home/demo/public_html/domain.com/logs/access.log combined
</VirtualHost>
I've been messing with it for about 45 minutes and I'm worn out at ~4:30am and could use a helping hand from the pros.
When restoring a backup on Plesk 12, the error below is generated for some sites and the sites are only partially restored. Although the message talks about disk space, there is in fact plenty of free disk space - i.e. many GB. The backup was created on Plesk 11.5. The restore on Plesk 11.5 works.
I noticed that all the failed domains exceed the disk space allowed by their Service Plan. However, the 'Overuse is allowed' setting is selected. Strangely, I tried changing the Service Plan and retrying the backup and restore, and the same errors were generated.
<object type="domain" name="domain.com">
<object type="hosting" name="domain.com">
<message code="CantUnpackDomainContent" severity="warning" id="f3946c79-7ae2-4be2-8300-ba766bea7869">
<description>Can not deploy content of domain domain.com</description>
[Code] .....
In order to install moodle, I need to upgrade MySQL from 5.1 to 5.5. I have gone through one of the KB articles [URL], but it's not very clear.
Can I upgrade it through Add/remove Components from Install and update products just like it can be done for PHP?? I see MySQL Server 2005, 2008 and 2012,
I have a plesk server with me, would like to check how should I upgrade my .net framework to 4.5?
Do I need to update the framework by using the control panel or manually download and install?
The plesk is a Parallels Plesk Panel 11.x for Windows.
connected to my other question regarding hMailserver and Plesk 11.5 for Windows I still need to transfer/upgrade two other servers to Plesk 11.5 - and these two are using hMailserver. During the upgrade to Plesk 11.5.x hMailserver is kicked out and Mail Enable SE is installed (and luckily configured). The users will have their old mails stored with hMailserver and a "blank" new mailbox with Mail Enable. Somehow I need to transfer or migrate these mails from hMailserver to Mail Enable.
My solution last time was "easy but annoying": I set new passwords for all mailboxes and used IMAPcopy to copy all messages, one by one. This took like forever!There was just no other solution as I already upgraded my installation. As of now, the "Upgrade Notes" published by Parallels suggest to "upgrade by migrate". How to do this, without IMAPcopy and all this trouble? Maybe if I get a backup of the mails and restore this backup? Is there a way to only backup the mails instead of the whole configuration and stuff?
During downloading the files for the upgrade, it is hanging at downloading the following file:
plesk.msi
When I look at the C:ParallelsInstallerparallelsPANEL-WIN_11.0.9dist-msi-Microsoft-2003-i386 I see that the file is .tmp and cannot be deleted.
I do not know how to stop the upgrade, delete the .tmp file and download the files again.
My windows server's hard disk was crashed & now I have mounted it as secondary hard disk on the server .
Now I want to restore the data to new server .
Plesk has mysql installed with it to run properly and I need to upgrade that version to the latest. Now I am not talking about the mysql server that it provides for me to create databases on. I am talking about the version it uses to run.
View 3 Replies View RelatedProblem with FTP Users on Plesk 11 after updating from Plesk 10.
SO: Windows Server 2008 R2 Standard Edition
Panel: Plesk for Windows 11.0.4
I noticed that users cannot FTP, when trying to connect they receive an error: 530 User cannot log in, home directory inaccessible.
Doing further investigation, I confirmed that only users created after upgrade have this issue, that created before upgrade works fine.
I already discovered that home directory is missing on IIS 7.5 FTP. Creating a symbolic link on NTFS using MKLINK command pointing to home folder and configuring permissions to user solved the problem.I think its a bug on Plesk Panel 11.0.4 as I can see same the same problem on two distinct servers after upgrading from Plesk 10 to 11.
I tried to run Plesk Reconfigurator utility with all options, without success.I can fix home directory by myself manually but it will be great if Plesk Panel handle this again.
I need to upgrade from smartermail 5.5 to latest smatermail 9 . Let me know any option via plesk panel
Plesk 10.4.4 is currently installed my server. Going to upgrade plesk 11
I have Parallels Plesk Control Panel installed on Windows Server 2008 with PHP 5.2.17. In order to install moodle, it requires PHP 5.4.4 installed. How do I upgrade to the latest PHP or to version 5.4.4, are there any standard instructions?
View 4 Replies View Relatedi Have 2 vps From Swvps and HostForWeb
When Finish Transfer Old VPS( HostForWeb ) To New VPS (Swvps.com) and See Disk Usage
Swvps=> 13 gig Usage
HostForWeb=> 23 gig space!
Where does the log file for the web traffic usage shown in plesk (in plesk tools and settings->statistics) gets saved in the server(windows server 2008 R2)?
Does it related to the folder C:inetpubvhostsincometaxsoft.comstatisticslogsW3SVC7.
Since I upgraded to Plesk 12, when I create a new subscription, an IUSR account is no longer created for that website so I can grant the appropriate permissions to folders, etc.
View 2 Replies View Relatedi want to uprage my plesk panel to 12. But i have this problem
"Parallels Panel pre-upgrade checking... 'wmic.exe' is not recognized as an internal or external command,
operable program or batch file.
FATAL_ERROR: Unable to get IP address"
I see that, when subscriptions is suspended, backup manager continuous working.
View 2 Replies View Related