Plesk 11.x / Windows :: Upgrade Net Framework To 4.5

Jan 17, 2013

I have a plesk server with me, would like to check how should I upgrade my .net framework to 4.5?

Do I need to update the framework by using the control panel or manually download and install?

The plesk is a Parallels Plesk Panel 11.x for Windows.

View 11 Replies


ADVERTISEMENT

Plesk 11.x / Windows :: Upgrade MySQL From 5.1 To 5.5?

May 21, 2014

In order to install moodle, I need to upgrade MySQL from 5.1 to 5.5. I have gone through one of the KB articles [URL], but it's not very clear.

Can I upgrade it through Add/remove Components from Install and update products just like it can be done for PHP?? I see MySQL Server 2005, 2008 and 2012,

View 2 Replies View Related

Plesk 11.x / Windows :: How To Upgrade By Migrate

Sep 17, 2013

connected to my other question regarding hMailserver and Plesk 11.5 for Windows I still need to transfer/upgrade two other servers to Plesk 11.5 - and these two are using hMailserver. During the upgrade to Plesk 11.5.x hMailserver is kicked out and Mail Enable SE is installed (and luckily configured). The users will have their old mails stored with hMailserver and a "blank" new mailbox with Mail Enable. Somehow I need to transfer or migrate these mails from hMailserver to Mail Enable.

My solution last time was "easy but annoying": I set new passwords for all mailboxes and used IMAPcopy to copy all messages, one by one. This took like forever!There was just no other solution as I already upgraded my installation. As of now, the "Upgrade Notes" published by Parallels suggest to "upgrade by migrate". How to do this, without IMAPcopy and all this trouble? Maybe if I get a backup of the mails and restore this backup? Is there a way to only backup the mails instead of the whole configuration and stuff?

View 1 Replies View Related

Plesk 11.x / Windows :: Upgrade From 10.2 Is Hanging

Oct 12, 2012

During downloading the files for the upgrade, it is hanging at downloading the following file:

plesk.msi

When I look at the C:ParallelsInstallerparallelsPANEL-WIN_11.0.9dist-msi-Microsoft-2003-i386 I see that the file is .tmp and cannot be deleted.

I do not know how to stop the upgrade, delete the .tmp file and download the files again.

View 2 Replies View Related

Plesk 11.x / Windows :: How To Upgrade Mysql 4.x Installation

Jul 29, 2012

Plesk has mysql installed with it to run properly and I need to upgrade that version to the latest. Now I am not talking about the mysql server that it provides for me to create databases on. I am talking about the version it uses to run.

View 3 Replies View Related

Plesk 11.x / Windows :: FTP Not Working For New Users After Upgrade

Jul 30, 2012

Problem with FTP Users on Plesk 11 after updating from Plesk 10.

SO: Windows Server 2008 R2 Standard Edition
Panel: Plesk for Windows 11.0.4

I noticed that users cannot FTP, when trying to connect they receive an error: 530 User cannot log in, home directory inaccessible.

Doing further investigation, I confirmed that only users created after upgrade have this issue, that created before upgrade works fine.

I already discovered that home directory is missing on IIS 7.5 FTP. Creating a symbolic link on NTFS using MKLINK command pointing to home folder and configuring permissions to user solved the problem.I think its a bug on Plesk Panel 11.0.4 as I can see same the same problem on two distinct servers after upgrading from Plesk 10 to 11.

I tried to run Plesk Reconfigurator utility with all options, without success.I can fix home directory by myself manually but it will be great if Plesk Panel handle this again.

View 2 Replies View Related

Plesk 11.x / Windows :: Smatermail Upgrade Via Panel

Aug 2, 2012

I need to upgrade from smartermail 5.5 to latest smatermail 9 . Let me know any option via plesk panel

Plesk 10.4.4 is currently installed my server. Going to upgrade plesk 11

View 3 Replies View Related

Plesk 11.x / Windows :: Upgrade Php To Latest Version?

May 19, 2014

I have Parallels Plesk Control Panel installed on Windows Server 2008 with PHP 5.2.17. In order to install moodle, it requires PHP 5.4.4 installed. How do I upgrade to the latest PHP or to version 5.4.4, are there any standard instructions?

View 4 Replies View Related

Plesk 12.x / Windows :: No IUSR Accounts Created Since Upgrade?

Aug 13, 2014

Since I upgraded to Plesk 12, when I create a new subscription, an IUSR account is no longer created for that website so I can grant the appropriate permissions to folders, etc.

View 2 Replies View Related

Plesk 11.x / Windows :: Parallels Panel Pre-upgrade Checking

Jul 13, 2015

i want to uprage my plesk panel to 12. But i have this problem

"Parallels Panel pre-upgrade checking... 'wmic.exe' is not recognized as an internal or external command,

operable program or batch file.

FATAL_ERROR: Unable to get IP address"

View 4 Replies View Related

Plesk 11.x / Windows :: Backup Manager After Upgrade To Panel 11.5.30

Nov 4, 2013

I see that, when subscriptions is suspended, backup manager continuous working.

View 2 Replies View Related

Plesk 11.x / Windows :: Cannot Change Preferred Domain Section After Upgrade

Jun 14, 2013

After upgrade plesk 11 to 11.5 there is a new feature in domain hosting settings which is called "Preferred domain"

We can not change the state of Preferred domain. It always remain domain.tld When we try to change it to "none" panel says "Information: The settings were successfully updated."

When we check hosting settings again Preferred domain section is domain.tld . due to that reason we r having lots of diffuculties. Lots web page down due to web.config file has redirection.

View 8 Replies View Related

Plesk 12.x / Windows :: Database Server Warning After Panel Upgrade

Jun 23, 2014

After Plesk Panel upgrade to 12.x I found a warning showing at Home>Tools & Settings> Database Servers

Warning: Unable to determine the TCP port number used by Microsoft SQL server '.SQLEXPRESS': TCP/IP protocol is not enabled in the server network configuration or the server is configured to use dynamic TCP ports.

To allow your customers to automatically configure firewall for remote database access, manually configure the SQL server to listen on a specific fixed TCP port.Click to expand...

View 3 Replies View Related

Plesk 12.x / Windows :: Webadmin Stopped Working After Panel Upgrade

Jun 23, 2014

After Plesk panel upgrade to 12.x webadmin stopped working . It's showing following error

Code:
Server Error in '/' Application.
The resource cannot be found.

Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. review the following URL and make sure that it is spelled correctly.

View 2 Replies View Related

Plesk 11.x / Windows :: Import MySQL - Database Failed After Upgrade

Aug 13, 2013

Since we upgraded to Plesk 11.5 or (I'm not shure) the last Update 12, user can not import MySQL-Databases anymore.

If the user open phpMyAdmin for import and select the database and click on Ok, phpMyAdmin does nothing.

I heard that could be a problem with JQUERY and I checked the files in ParallelsadminhtdocsdomainsdatabasesphpMyAdminjsjquery and all files seems to be there.

Only if I check the source of the phpMyAdmin Import-Website it seems, there is a problem with jquery-1.6.2+fix-9521.js.

But how I can fix this problem for all Windows-Servers.

View 19 Replies View Related

Plesk 12.x / Windows :: After Upgrade Unable To Dump IP Addresses For Mail Service

Jul 23, 2014

After upgrading from 11.5.30 to 12.0.18, when make backup see next message:

<?xml version="1.0" encoding="utf-8"?>
<execution-result status="error">
<object name="example.com" type="domain">
<message severity="error" id="167b9714-3e33-4863-861d-69c4f559afe6" code="InformationalException">
<description>Unable to dump IP addresses for mail service</description>

[Code] ....

View 6 Replies View Related

Plesk 12.x / Windows :: Domain Disk Usage Not Shown Correctly After Upgrade From 11.5 To 12

Jul 14, 2014

I have upgrade plesk to 12 version and after upgrade all the domains that have more than 2048 MB on the server are shown as 2048 MB.

If i go on the domain statistic the tab the total disk usage is 2048.1 MB but on the graph the services disk usage are shown correctly.

I have 2 print screen.

View 6 Replies View Related

DotNet Framework 3.0 And 3.5

Jan 12, 2008

Is the right time to install Dotnet Framework 3.0 and 3.5 in a shared hosting server?

There are already .NET 1.1 and 2.0 installed in the server. What are the problems that might occur if 3.0 or 3.5 are installed?

View 8 Replies View Related

Security Framework Of WSN

Oct 21, 2007

i have a problem in wireless sensor network wish can get some help here..

for your information, I am doing a project which under title security framework of WSN.

my task is running the simulation of the new model security framework that i porpose.
the simulator i going to use is ns2 and the security i focus on is key management.

But my problem is i don't have much information and source of this key management with ns 2, and what i have search from net all is so general bout the key management.

means i am out of idea how to relate the key management with ns-2 before i start my nest task.

View 0 Replies View Related

How Long Until Sender Policy Framework Take Effect (my Email Is Being Spoof)

Jun 4, 2008

my email address is being spoof/forge. i have added spf record into the DNS for couple days now but i'm still getting rejected/bounced email. is this correct or is spammer is still able to forge my email and sending out spam?

edit: where can i check if my domain/server is on spam block list? since dnsstuff's tool cost money.

View 4 Replies View Related

Plesk Upgrade...

May 21, 2008

I have got some old plesk boxes that i am trying to migrate to a new box running 8.4 the old versions are 5.0.4 and 5.0.5.

I have managed to export everything from the 5.0.5 box but i cannot do it from the 5.0.4 box.

I have searched all day long for how you can upgrade from 5.0.4 to 5.0.5.

All I got from the rather helpful folks at Plesk (or what ever they call themselves these days) is that i need to upgrade to 7.5.

View 3 Replies View Related

Plesk Upgrade 7.5.6 To 8.1

Feb 12, 2007

Does anyone here familiar with Plesk?

Just wondering is it worth it to upgrade from 7.5.6 to 8.1 and if it is easy to do?

Also, with the lease license, do you get the sitebuilder and antispam for free?

View 1 Replies View Related

In Case You're Considering Plesk Upgrade To 8.2

Jul 14, 2007

upgrade fails often with severe issues.

My server had issues and it took me 3 days to solve it.

Plesk gives only paid support and not wanting to pay them more then the license I just bought 2 months ago I read the forum threads and found a work around that finally worked.

If you are considering to upgrade - please check out their forums for issues first as it's very common to have them...

View 2 Replies View Related

Plesk 11.x / Linux :: Cannot Upgrade From 11.0.9 To 11.5

Apr 1, 2015

I have a Plesk host that I am tasked with upgrading. It started with openSUSE 11.4 on Plesk 10.4 and I have upgraded it all the way to openSUSE 12.2 on Plesk 11.09 (fixed minor issues with pop3d and mysql locking on the way). The next upgrade was supposed to be 11.5, but the option to upgrade it never shows up. I have re-instated our support license so I know the license is OK, and also checked that 11.5 supports openSUSE 12.2. The update log doesn't really tell me much either:

Code:

Release PLESK_12_1_18 contains no any build for this OS
Release PLESK_12_1_17 contains no any build for this OS
Release PLESK_12_1_16 contains no any build for this OS
Release PLESK_12_1_15 contains no any build for this OS
Release PLESK_12_1_14 contains no any build for this OS

[code]....

View 1 Replies View Related

Plesk 11.x / Linux :: Upgrade From 11.5.3 To 12.0.8

Jul 31, 2014

While running the plesk auto installer script and upgrading I get the following error.

Components validation detected at least one important issue:
Parallels Panel pre-upgrade check...
dpkg-query: no packages found matching psa-atmail
dpkg-query: no packages found matching psa-horde
dpkg-query: no packages found matching libapache2-modsecurity
WARNING: IP address registered in Plesk is invalid or broken: xxx.xxx.xxx.xxx

Panel version: 11.5.30 Update #47, last updated at June 19, 2014 07:32 AM

OS:
Distributor ID:Debian
Description:Debian GNU/Linux 7.6 (wheezy)
Release:7.6
Codename:wheezy

Upgrade log [URL] ....

View 4 Replies View Related

Plesk 12.x / Linux :: Upgrade From 11.5 To 12?

Jun 16, 2014

we have bought Plesk 11.5 3 months ago.

Is it possible to upgrade to 12? How do I have to proceed for the upgrade?

View 5 Replies View Related

PHP 4.3.9 MYSQL 4.1.20 UPGRADE On CENTOS 4 With Plesk 8

May 28, 2009

I am planning on upgrading to php 5. I really don't need to upgrade to mysql 5 but do you guys think I will face problems with PHP 5.2.9 and Mysql 4.1.20 working together...

I am planning on doing the upgrade like this (if I decide to upgrade PHP and MYSQL all together)

1. STEP
nano /etc/yum.repos.d/CentOS-Base.repo

2. STEP
change the enabled=0 to 1 as follows

[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
#baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=1
gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4
priority=2
protect=1

4.STEP
yum install php-xml

5.STEP
yum update httpd* php* mysql*

and restart the server do you guys think I will face any problems.

If I am only upgrading the php to latest I am planning on doing

1.STEP
I will do the 2.STEP above

2.STEP
wget -q -O - http://www.atomicorp.com/installers/atomic.sh |sh
yum install php-xml php-pdo
yum install php-pear
mv /etc/php.ini.rpmnew /etc/php.ini

and reboot

View 4 Replies View Related

PHP 4.3.9 MYSQL 4.1.20 UPGRADE On CENTOS 4 With Plesk 8

May 28, 2009

I am planning on upgrading to php 5. I really don't need to upgrade to mysql 5 but do you guys think I will face problems with PHP 5.2.9 and Mysql 4.1.20 working together...

I am planning on doing the upgrade like this (if I decide to upgrade PHP and MYSQL all together)

1. STEP
nano /etc/yum.repos.d/CentOS-Base.repo

2. STEP
change the enabled=0 to 1 as follows

[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=[url]
release=$releasever&arch=$basearch&repo=centosplus
#baseurl=[url]
gpgcheck=1
enabled=1
gpgkey=[url]
priority=2
protect=1

4.STEP
yum install php-xml

5.STEP
yum update httpd* php* mysql*

and restart the server do you guys think I will face any problems.

If I am only upgrading the php to latest I am planning on doing

1.STEP
I will do the 2.STEP above

2.STEP
wget -q -O - [url]
yum install php-xml php-pdo
yum install php-pear
mv /etc/php.ini.rpmnew /etc/php.ini

and reboot

View 2 Replies View Related

Apache Don't Work With PLESK 12.0.18 Upgrade

Sep 17, 2014

I has Parallels Ples 11.X with Cent OS 6.5 and yesterday i tried to upgrade to PLESK 12.0.18.

Now, I can't start the apache module because it´s impossible to create the config file

The issue is:

Details: [2014-09-17 19:46:27] ERR [util_exec] proc_close() failed
[2014-09-17 19:46:34] ERR [panel] Apache config (14109759800.30476400) generation failed: Template_Exception: Can not restart web server: Service /etc/init.d/httpd failed to start
Service /etc/init.d/httpd failed to start

file: /usr/local/psa/admin/plib/Service/Driver/Web/Server/Apache.php
line: 104
code: 0
Can not restart web server: Service /etc/init.d/httpd failed to start
Service /etc/init.d/httpd failed to start

I try with cp the certifies and writing a new private key but it didn't work.

I try to reinstall the Plesk but it didn't work.

View 8 Replies View Related

Plesk 11.x / Linux :: POP Login After Upgrade

Jun 17, 2013

Over the weekend, I upgraded from Plesk 10.3 to Plesk 11.5, using the updater in the control panel. Everything seemed to go well. However, this morning I've noticed that some, not all, email accounts are having trouble logging into the server to send and receive mail. Other accounts are working fine.Via POP, I get this error: -ERR Temporary problem, please try again later

Via SMTP, I get this error:
535 auth failure

I see this in the maillog:

Jun 17 07:15:05 [server] courier-pop3d: LOGIN FAILED, user=[username], ip=[::ffff:xxx.xxx.xxx.xxx]
Jun 17 07:15:05 [server] courier-pop3d: authentication error: Input/output error

And this... Jun 17 07:24:50 [server] smtp_auth: FAILED: [email address] - password incorrect from [host] [xxx.xxx.xxx.xxx]

I replaced the server name, username, host, and IP in the above.

Here are the steps I've tried so far.
- Changing the password using the control panel.
- Updating the number of daemons in authdaemonrc
- Restarting the services

View 3 Replies View Related

Plesk 12.x / Linux :: Login Not Possible After Upgrade?

Jun 27, 2014

I just upgraded my Plesk on Ubuntu (vServer) yesterday. But after the upgrade I couldn't login to the Panel anymore because all I get when I try to reach the panel (https://panel.examplesite.com:8443) is a white screen.

I rebooted the server and restarted the panel as well as Apache several times with no change.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved