I have Parallels Plesk Control Panel installed on Windows Server 2008 with PHP 5.2.17. In order to install moodle, it requires PHP 5.4.4 installed. How do I upgrade to the latest PHP or to version 5.4.4, are there any standard instructions?
View 4 RepliesHere my msg. i get while trying to update via the Panel:
Code:
Unable to obtain the latest version of Parallels Installer: The required version '3.15.15' was not found on the server. This could happen because of configuration error at the download site. Failed to download the package
[URL] ....
The requested URL returned error: 404
Running Debian 7
PV: 11.5.30 Update #11
I have a CentOS server based on WHM ( Whm version : 11.24 )
i have just upgraded the WHM but it has not been upgraded to the latest version (i mean : 11.25 )
My WHM version is still 11.24
SecurityMetrics has determined that we are not COMPLIANT with the PCI scan validation requirement for our server.
The remote host is running a version of the Exim MTA which is vulnerable to several remote buffer overflows. Specifically, if either 'headers_check_syntax' or 'sender_verify = true' is in the exim.conf file, then a remote attacker may be able to execute a classic stack- based overflow and gain inappropriate access to the machine. *** If you are running checks with safe_checks enabled, this may be a false positive as only banners were used to assess the risk! *** It is known that Exim 3.35 and 4.32 are vulnerable. Solution: Upgrade to Exim latest version Risk Factor: High
HOW DO i Upgrade to Exim latest version? I am on WHM/Cpanel 11 (centos 5) I never did this before.
I noticed when installing latest version of APF 0.9.6.3 over the previous version 0.9.6.2 it will import all the variable and ports settings from conf.apf and allow_hosts.rules files of the previous version. so there will be no need to edit or configure any thing any more when upgrading APF exept setting DEVEL_MODE to 0 and restart APF.
View 0 Replies View RelatedIs it safe to upgrade to the latest Linux kernel version 2.6.19.2 (released on January 10th, 2007) ? Is there any reported problems or have anyone faced issues after upgrading?
View 8 Replies View RelatedI'm still using Plesk 11.5.30 and MySql 5.5.39. That was discribed here how to update. But i need to have a MySql 5.6.5 (minimum) for some software (This version is over 2 years old). I'm using CentOs 6.5. and PHP 5.4.33
how to do this, whitout breaking plesk 11.5.30??
When I click upgrade now at the plesk panel I get following error:
Parallels Panel pre-upgrade check... WARNING: The proftpd FTP service will fail to start in case the support for IPv6 is disabled on the server. Please check [URL] .... for details.
Is it safe to proceed? I guess it shall be automatically?
I have experimented a strange behaviour on plesk linux 12.0.18 Update #33
Basically:
1. I have recompiled Apache with more file descriptors
2. Several days later watchdog did not work properly. Support requested me to remove and install wd
3. I ran the autoinstaller. All my compiled version where replaced.
Watchdog is ok now, but I have to recompile Apache.
I have been searching on forum and kb but could not find any reoccurance.
Question : Is there a way to avoid this ?
Compilation performed based on article [URL]
after having executed /usr/local/psa/admin/bin/autoinstaller --debug
[root@ns7 scripts]# rpm -qa --last | grep "Sat 21 Feb 2015"
psa-watchdog-12.0.18-cos6.build1200140707.14.x86_64 Sat 21 Feb 2015 01:12:58 PM CET
php-tidy-5.3.3-40.el6_6.x86_64 Sat 21 Feb 2015 01:10:07 PM CET
[Code]....
I need to change to all subscriptions to php 5.4 version. How can I do at the same time to all subscriptions? I tray to change in the service plans but it's dont' run. We have more than 270 subscriptions, How do you change all the time?
View 8 Replies View Relatedhow to install older version of WordPress - version 3.7 has just come out and it is the only version I can install via the Plesk panel but unfortunately half of the themes out there only support up to 3.6
View 6 Replies View RelatedI update last version of antivirus ClamWin 0.98.1, but after refresh "Server Component" , I see that version of ClamWin is 0.98. Where are the problems on ClamWin or Plesk Panel?
View 1 Replies View RelatedSomeone familiar with server software upgrade, please help. I want upgrade from php 4 to php version 5.
My server not running with cpanel or anything. Just apache, php and mysql!
my dedicated server is running using cPanel 11
apache 1.3.39 , php 5.2.4
i read a thread here in WHT says the " apache 2.2 with php 5.2.5 handle the load
and doing high performance"
if it is true , plz anyone get the tutorials to upgrade it using /scripts/easyapache
with GD libraries .
and after upgrade will i have to re secure php again or what?
I installed Plesk 12 on server, and deployed several websites.
If I tried to open ASP.NET Settings on websites & domains of any domain, I've got error:
Internal error: aspnetcfg failed: Version string portion was too short or too long. (Error code 1)
Message aspnetcfg failed: Version string portion was too short or too long. (Error code 1)
File Agent.php
Line 243
Type PleskUtilException
How can I fix this?
In order to install moodle, I need to upgrade MySQL from 5.1 to 5.5. I have gone through one of the KB articles [URL], but it's not very clear.
Can I upgrade it through Add/remove Components from Install and update products just like it can be done for PHP?? I see MySQL Server 2005, 2008 and 2012,
I have a plesk server with me, would like to check how should I upgrade my .net framework to 4.5?
Do I need to update the framework by using the control panel or manually download and install?
The plesk is a Parallels Plesk Panel 11.x for Windows.
connected to my other question regarding hMailserver and Plesk 11.5 for Windows I still need to transfer/upgrade two other servers to Plesk 11.5 - and these two are using hMailserver. During the upgrade to Plesk 11.5.x hMailserver is kicked out and Mail Enable SE is installed (and luckily configured). The users will have their old mails stored with hMailserver and a "blank" new mailbox with Mail Enable. Somehow I need to transfer or migrate these mails from hMailserver to Mail Enable.
My solution last time was "easy but annoying": I set new passwords for all mailboxes and used IMAPcopy to copy all messages, one by one. This took like forever!There was just no other solution as I already upgraded my installation. As of now, the "Upgrade Notes" published by Parallels suggest to "upgrade by migrate". How to do this, without IMAPcopy and all this trouble? Maybe if I get a backup of the mails and restore this backup? Is there a way to only backup the mails instead of the whole configuration and stuff?
During downloading the files for the upgrade, it is hanging at downloading the following file:
plesk.msi
When I look at the C:ParallelsInstallerparallelsPANEL-WIN_11.0.9dist-msi-Microsoft-2003-i386 I see that the file is .tmp and cannot be deleted.
I do not know how to stop the upgrade, delete the .tmp file and download the files again.
Plesk has mysql installed with it to run properly and I need to upgrade that version to the latest. Now I am not talking about the mysql server that it provides for me to create databases on. I am talking about the version it uses to run.
View 3 Replies View RelatedProblem with FTP Users on Plesk 11 after updating from Plesk 10.
SO: Windows Server 2008 R2 Standard Edition
Panel: Plesk for Windows 11.0.4
I noticed that users cannot FTP, when trying to connect they receive an error: 530 User cannot log in, home directory inaccessible.
Doing further investigation, I confirmed that only users created after upgrade have this issue, that created before upgrade works fine.
I already discovered that home directory is missing on IIS 7.5 FTP. Creating a symbolic link on NTFS using MKLINK command pointing to home folder and configuring permissions to user solved the problem.I think its a bug on Plesk Panel 11.0.4 as I can see same the same problem on two distinct servers after upgrading from Plesk 10 to 11.
I tried to run Plesk Reconfigurator utility with all options, without success.I can fix home directory by myself manually but it will be great if Plesk Panel handle this again.
I need to upgrade from smartermail 5.5 to latest smatermail 9 . Let me know any option via plesk panel
Plesk 10.4.4 is currently installed my server. Going to upgrade plesk 11
Since I upgraded to Plesk 12, when I create a new subscription, an IUSR account is no longer created for that website so I can grant the appropriate permissions to folders, etc.
View 2 Replies View Relatedi want to uprage my plesk panel to 12. But i have this problem
"Parallels Panel pre-upgrade checking... 'wmic.exe' is not recognized as an internal or external command,
operable program or batch file.
FATAL_ERROR: Unable to get IP address"
I see that, when subscriptions is suspended, backup manager continuous working.
View 2 Replies View RelatedAfter upgrade plesk 11 to 11.5 there is a new feature in domain hosting settings which is called "Preferred domain"
We can not change the state of Preferred domain. It always remain domain.tld When we try to change it to "none" panel says "Information: The settings were successfully updated."
When we check hosting settings again Preferred domain section is domain.tld . due to that reason we r having lots of diffuculties. Lots web page down due to web.config file has redirection.
After Plesk Panel upgrade to 12.x I found a warning showing at Home>Tools & Settings> Database Servers
Warning: Unable to determine the TCP port number used by Microsoft SQL server '.SQLEXPRESS': TCP/IP protocol is not enabled in the server network configuration or the server is configured to use dynamic TCP ports.
To allow your customers to automatically configure firewall for remote database access, manually configure the SQL server to listen on a specific fixed TCP port.Click to expand...
After Plesk panel upgrade to 12.x webadmin stopped working . It's showing following error
Code:
Server Error in '/' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. review the following URL and make sure that it is spelled correctly.