It appears that my clients disk space usage calculation is including admin full server FTP backups that I am doing.
This shouldn't be the case, these full server backups that I'm doing should not count towards my clients plans disk space allowance.
I migrated from one server running Plesk 10.4.4 Update #59 to a new server running Plesk 11 which I then updated to 12.0.18 Update #32. Since moving to Plesk 12 the "Notify when disk space/traffic usage reaches" emails have been being sent to our customers set up on the server whereas previously they were sent to the server admin email address.
Is this a change with this version?
I changed the DUMP_TEMP_D directory in psa.conf.
I have set it on /var/backups and given the permission 1777.
I have rebooted the psa service and initialized the backup again but it always returns that error.
Moreover, if I run the command df -h, the tmp directory doesn't appear.
Whenever I am trying to take backup through Parallels Plesk (Plesk version:12.0.18 Update #53) getting an error "Error: Insufficient disk space for backup. "
Default backup location is '/var/lib/psa/dumps' with enough space (Near 1TB). Then why showing above error message?
Version Details:
Version Parallels Plesk v12.0.18_build1200140811.16 os_CentOS 7
OS CentOS Linux 7.1.1503 (Core)
[Code]....
How much local disk space is necessary for a full backup of 240 GB data to a remote ftp?
I have 314 GB free on my local disk, but this is still not enough.
The backup process is 100% after round about 4 hours, according to Backup Manager.
But there are still tar processes until the disk is full.
I'm on PPA 11.5 MU#2 (Should upgrade to MU#3 soon). My problem is that the Usage of Disk Space for all my customers subscriptions are not calculated. I've run the daily maintenance script (which it actually runs periodically), but there's no update on the display.
View 3 Replies View RelatedWe have a lot of server with Plesk Panel 30 domains.We have migrated a website with a 2 Go disk space quota on a virtual server with Web Admin Plesk Panel License. So, we don't have field (or we don't find...) to update this value (or delete it). The website disk usage is now 2.1 Go. Every day, we have an email alert.
View 14 Replies View RelatedWe have Plesk installed with a dedicated disk on /opt. System disk is about 20 GB, data disk is about 220 Gb.There is 190 Gb free on the data disk (mounted on /opt).
But when we try to increase allocated space for a domain, Plesk says that there's enough disk space..Is there any change or adjustement on Plesk we can do, so Plesk will check space on the good disk ?
I have a customer on a 250MB hosting plan and has been using approximately 450MB for the past few days but hasn't received a resource overuse email.
In my notifications I have "Resource usage limits exceeded by subscription" set to send myself and the customer an email but neither of us have received anything.
I have Plesk 12 on Centos6.I require a list of every subscription which has consumed the most data on the server. Disk space used by the following files and directories in the subscription:
Websites
Mail accounts
Databases
Logs
Backups
Chroot directories
Configuration files
Anonymous FTP directory
The Plesk bible only listed that this was possible through Subscriptions > Statistics. URL....However viewing the Subscriptions > Statistics is not an option because there are many subscriptions..I also have access to SSH/terminal and found a script for finding large file and directories here URL....However i rather have it in excel or HMTL format.
I'm running Plesk 12.0.18 on Centos 7, recently I've got emails from backup service stating that it could not complete the backup due to insufficient space available on disk. Normally I have plenty of disk space available so I check the disk using the command
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/root 20G 2.3G 17G 13% /
/dev/md2 91G 82G 4.4G 95% /var
it seems that /var has been growing up a lot,
but if I run the command
du -sh /var
I get a total size of 5.7G (not 82G as stated before)
is Plesk calculating the wrong size or it's me using the wrong commands?
I host a number of large sites (20GB+) on my VPS server running Centos6 and Plesk Panel 12. Due to the large sites I don't want to keep multiple backups on the actual server because it would take too much disk space. When I create a backup to the server's repository all is good, but when I click the green arrow to download the backup it takes a long time and then it fails with a timeout error. On some smaller sites it takes a while but eventually downloads the tar.
So my question: Is it possible to access the Server Repository via FTP? How and where would I set this up? Presumably it would be a better way to download these large archive files?
I have a plesk
[root@srv tmp]# cat /usr/local/psa/version
10.3.1 CentOS 5 1013110726.09
I have following problem:
When i do full backup and download this backup, plesk create a temporary file inside directory /usr/local/psa/tmp but after download finish this file is not deleted, and this is causing problem because i have a server with small disk space.
Does anyone know why Disk Space needs to be entered in both 'Clients' & 'Domains' in Plesk? I don't understand how that works... If I set up a client template and make this 250MB Disk Space, and then set up a new Client using this template... Next I attach them to my Domain template where I have given them unlimited Disk Space... What will they have 250MB or Unlimited?
View 6 Replies View RelatedWhen restoring a backup on Plesk 12, the error below is generated for some sites and the sites are only partially restored. Although the message talks about disk space, there is in fact plenty of free disk space - i.e. many GB. The backup was created on Plesk 11.5. The restore on Plesk 11.5 works.
I noticed that all the failed domains exceed the disk space allowed by their Service Plan. However, the 'Overuse is allowed' setting is selected. Strangely, I tried changing the Service Plan and retrying the backup and restore, and the same errors were generated.
<object type="domain" name="domain.com">
<object type="hosting" name="domain.com">
<message code="CantUnpackDomainContent" severity="warning" id="f3946c79-7ae2-4be2-8300-ba766bea7869">
<description>Can not deploy content of domain domain.com</description>
[Code] .....
I have been a Plesk Panel user for several years and I found PPA very interesting because of its great scalability.
It has been time consuming to figure it out how PPA handles several Plesk Panel aspects.
Does PPA has support for MailEnable disk usage calculation? If it does, where? and how often does it collect disk usage info from Mail Service Node??
My server has a small SAS disk(about 73G), if I use 90% diskspace of it, is it good idea, will it harm the physical HDD?
View 6 Replies View RelatedI have upgrade plesk to 12 version and after upgrade all the domains that have more than 2048 MB on the server are shown as 2048 MB.
If i go on the domain statistic the tab the total disk usage is 2048.1 MB but on the graph the services disk usage are shown correctly.
I have 2 print screen.
Where I can find option for enable multiple log in for admin account?
View 6 Replies View Relatedjust a quick question for those already tried it. I have Horde installed as the webmailer for my Plesk installation. After login in to Horde with an admin account I get update notifications for several of Hordes apps. Is it safe to update them or will it lead to problems with Pleskl?
View 2 Replies View Relatedthere is emails creation limit in this license?
i got this: The limit on the number of mailboxes has been reached
I generate the ssl for my customer going into this direction:
Tools & Settings > SSL Certificates > add new
I put the key there its ok until here.
Then I follow this: After adding an SSL certificate to a domain, you need to enable SSL support and select that certificate in the website hosting settings: Websites & Domains > Hosting Settings of this domain > Security.
But the dropdownlist there are not SSL with the name that i create on panel.
I have just looked at the plesk panel log - /usr/local/psa/admin/logs/panel.log - and seen an alarming number of attempts to access plesk using the admin user. i.e.
[2015-02-02 14:53:46] ERR [panel] [Action Log] Failed login attempt with login 'admin' from IP 50.62.148.176
I have fail2ban installed and set up for other things...
To be clear i don't mean the wp-config.php admin password for mysql but the wordpress Plesk admin account that is associated with Log in button
For some reason my user has lost his password and is not able to use the Wordpress forgot password - wizard form at the page where you normally logged on.
I have tried to reset the password via Change Account on the WordPress Installation and it came back with the message
Error: Unable to find the specified administrator account in WordPress. Specify the username of your administrator's account in WordPress. This account will be associated with Plesk.
I have tried to add another admin via MySQL with this [URL] ... and that didn't work either.
Why can i login with two different passwords for the user admin in plesk control panel?
View 1 Replies View RelatedI'm running Plesk 12.0.18 Update #36 on CentOS 6.6 and when I log in, after just a minute of inactivity or so I get logged out.
The period of inactivity is set to 60 minutes, so that shouldn't be the problem.
