It is posible add new mail handler before queue for spam? Example:
mail_handlers_control --add --priority=10 --executable=/usr/local/psa/handlers/hooks/spam --name=spam --enabled --queue=before-queue --type=recipient-domain --mailname=domain.com --context=text
I need for scan relay mail ....
I have Spam in the Mail Queue.
How can I detect, where it come from, or how can I avoid it ?
On the server, there is installed a WordPress installation. Mail from this WordPress installation never reaches for example suscribers. Almost all mail remains in the Queue and will be deleted after 7 days. Could it be because I do not have an SSL Certificate? %
View 1 Replies View RelatedMy mail queue is growing up. I've stopped qmail but the queue goes on growing I must have an script running injecting mail in the queue, how can I find the script? I looked the running process (ps ) but I can not find anything (there is a lot of process!!!!)
View 4 Replies View RelatedI am relatively new in Plesk and have problems with mail not being sent properly. On the server, there is installed a WordPress installation. Mail from this WordPress installation never reaches for example suscribers. Almost all mail remains in the Queue and will be deleted after 7 days. Could it be because I do not have an SSL Certificate? I use:
Plesk 11.5
CentOS 6.6
postfix
Log file + configuration
I can receive email from all accounts and all domains.
The problem is that when sending an email to an external email (gmail., hotmail, outlook.com .... etc) this is sent to mail queue and do not leave that place.
Version 12.0.18. Using QMail.
If I attempt to remove even a small message from the mail queue, using the panel interface, the screen grays slightly but nothing happens. If I refresh the screen after several minutes, I'll sometimes get the following message:
"This operation is taking too long. Check the results in a few minutes."
Switching to Postfix eliminated the problem. But with Postfix, all of my Mailman lists (scores of them) broke, so I had to switch back -- and the problem reappeared.
I contacted the guys who I pay to watch over my linux Cpanel server and I do not think they know how to fix the problem. When I look in my mail queue manager in WHM I always see these spam type emails. I also see that my site IP gets blacklisted on:
[url]
I delist and then it appears again a couple of days later. My server is only used to send emails such as registrations and user notifications that they have subscribed to. Could anyone please tell me how to get rid of the spam?
Seems everythings is working normal when ignoring following error message, but everytime I add or change mail settings for a domain, I am getting this error:
Internal error.
ERROR:
Uncaught exception 'Zend_Log_Exception' with message '"/var/log/plesk/panel.log"
cannot be opened with mode "a"' in /usr/local/psa/admin/externals/Zend/Log/Writer/Stream.php:81
Stack trace: #0 /usr/local/psa/admin/plib/Plesk/Log.php(69): Zend_Log_Writer_Stream->__construct
[Code] .....
The problem is that all the mail that exits my VPS server (OVH) is going to the spam folders of Gmail, Outlook, etc accounts.
I've tried to connect my Gmail account to check via POP3 my inbox on my VPS, and all I get is an SSL error.
I have different adresses configured with several domains on the same server. All the emails send to gmail/hotmail adresses are marked spam.
Looking in the headers everything seems fine, including SPF:
Delivered-To: xxx@gmail.com
Received: by 10.202.174.138 with SMTP id x132csp563903oie;
Wed, 20 May 2015 04:53:19 -0700 (PDT)
X-Received: by 10.180.109.136 with SMTP id hs8mr40446245wib.73.1432122799197;
Wed, 20 May 2015 04:53:19 -0700 (PDT)
Return-Path: <x@x.nl>
Received: from x.net (x.net. [xx])
[Code] ....
testmessage
The server is not blacklisted...
Which Event Handler gets fired when a subscription is created? I've tried both "Hosting settings created" and "Default domain (the first domain added to a subscription/webspace) created" but those don't seem to be firing when I create a new subscription. After creating the Event Handler the psa service was restarted each time. I have a script setup to just log the NEW_DOMAIN_NAME to a file, but that isn't happening.
View 3 Replies View RelatedI just added a new PHP Handler with PHP Verison 5.5.18 as cgi and i always get an error when activating. I used the samte setting and php ini as the Buildin Ones
root@ip1:/usr/local/src/php-5.5.18# /usr/local/psa/bin/php_handler --list
id: display name: full version: version: type: cgi-bin: php-cli: php.ini: custom:
5.5.18 5.5.18 5.5.18 5.5 cgi /usr/local/php550-cgi/bin/php-cgi /etc/php5/cli/php.ini true
cgi 5.3.29 5.3.29 5.3 cgi /usr/bin/php5-cgi /etc/php5/cgi/php.ini false
fastcgi 5.3.29 5.3.29 5.3 fastcgi /usr/bin/php5-cgi /etc/php5/cgi/php.ini false
module 5.3.29 5.3.29 5.3 module /usr/bin/php5-cgi /etc/php5/cgi/php.ini false
When i want to activate it i get
Fehler: phpinimng failed: Cannot parse php.ini: (<class 'php_ini.PhpIniSyntaxError'>, PhpIniSyntaxError('[<stdin>:24] Invalid configuration line. Are there excessive leading spaces?',))
I get this even if i want to activate a build in one.
In my additional php config i have
mail.log = /var/log/phpmail.log
mail.add_x_header = On
date.timezone = "Europe/Berlin"
[Zend]
zend_extension=/usr/lib/php/modules/ioncube_loader_lin_5.3.so
zend_extension=/usr/lib/php5/ZendGuardLoader.so
sendmail_path = /usr/sbin/sendmail-wrapper-php
I am using Debian Squeeze.
sometimes my server doesn't forward emails to other accounts, and I see in log file:
Sep 25 07:38:55 s17218468 /usr/lib64/plesk-9.0/psa-pc-remote[1151]: handlers_stderr: DEFER
Sep 25 07:38:55 s17218468 /usr/lib64/plesk-9.0/psa-pc-remote[1151]: DEFER during call 'grey' handler
Sep 25 07:38:55 s17218468 /usr/lib64/plesk-9.0/psa-pc-remote[1151]: Message aborted.
If I restart the server it works.
On a server which was running for years now and was updated from plesk 10 to plesk 11 and also to plesk 12 (12.0.18 Update #29) there seems to be a bug.
Customers are able to change PHP handler while in site_isolation_settings.ini it is not allowed:
php_handler_type = fastcgi
PSA service was restarted too:
/etc/init.d/psa restart
This is a serious issue because customers should not be able to change PHP handler type.
Only abonnements created with older Plesk versions are affected. I cannot say which version exactly because server had installed Plesk 10, 11 and 12. What do we have to modify to disallow changing the PHP handler type for this abonnements created with Plesk versions befor Plesk 12?
I am running Plesk 11.5.30 on CentOS and trying to change the default permissions of the /httpdocs folder and the skeleton site that is in .skel/0/httpdocs that appears when a domain is created. I have failed to find the event that I need to use to trigger the command.
#!/bin/bash
chmod -R g+rwx "/var/www/vhosts/${NEW_DOMAIN_NAME}/httpdocs"
Some research suggested using the 'physical hosting created' but there is no option for this in 11.5.30.
Recently, I keep getting an email from my dedicated server company (godaddy, plesk 8.2 windows) that I've reached my daily limit of 1000 emails when I only send like 20-40 a day max.
So I want to take a look at whats going on, what emails have been sent/received and are still in queue?
Can can I access my mail queue using Plesk? And then how can I delete them?
All bounce emails are getting stack in queue (deferred). I tried a few suggestions I found around but nothing changed.
Ubuntu 12.04
Postfix
Plesk
I have a server(godaddy) with plesk. It was all working well till 8 - 10 days ago. I didnt notice it one week later where I started receiving a lot of failed mail notices. Then on investigation, there were more then 50K spam mails in the mail queue and the mails that were supposed to be sent(registration, forgot password) were also held up in the queue. I found the source of the spam and fixed that.
Also I cleared the mail-queue. Now when I try to send out a test message, it still gets held up in the mail queue. But I can send a test mail to the same domain (info@mydomain.com). All new user registration mails are also held up and this is greatly affecting the site.
Is it possible to add a ssl to a IP number despite of domain name?
I would like to know if i can buy a ssl and set a IP on website address...
I seem to be having a strange problem with Plesk 12, after adding about 23 domains, i cant seem to add any more domains.
While adding the domain, it just keeps syncing, and then when i click on the subscriptions i see the domain has been added, but i cannot customise it.
Error: IP addresses for mail service of domain xxxxxx.com are not set
View 3 Replies View RelatedI would like to install mcrypt extension on my server and i don't find procedure .
My version is :
OSCentOS 6.3 (Final)
Version de Parallels Panel11.0.9 Mettre à jour #36, dernière mise à jour à Fév 8, 2013 06:32 PM
According to de Plesk Administrator Guide and according to the kb article: [URL] ...., Plesk Panel is suitable to enable multiple php versions After I performed the steps mentioned in the kb article, all seemed fine until somehow php-cgi and php-fcgi broke down after
Code:
# service httpd restart
After this event, all websites hosted on this particular the server only work running php as an apache module.
I am running Pleks Panel 12.0.18 #7 on top of CenOs 6.5 on this particular server, which means php version 5.3.3 is installed by default. PHP 5.3.3 also is was the php version for the "custom: false" php handlers (id's: cgi, fastcgi, module). Somehow all php handlers look like this:
Code:
# /usr/local/psa/bin/php_handler --list
id: display name: full version: version: type: cgi-bin: php-cli: php.ini: custom:
cgi 5.5.13 5.5.13 5.5 cgi /usr/bin/php-cgi /etc/php.ini false
fastcgi 5.5.13 5.5.13 5.5 fastcgi /usr/bin/php-cgi /etc/php.ini false
[Code]....
How can I configure an event so when the number of emails in the queue exceeds a certain number then I am notified on the Mobile Plesk Server Monitor?
View 7 Replies View RelatedI'm having a hard time figuring why me emails are not delivered to mailboxes.
A bit of context:
OS: Ubuntu 12
Plesk pannel: 11.5
This server was supposed to be a new server (upgrade) from a previous who was working correctly (Also Linux with Plesk but both older versions).
After new server installed and websited up and running, I decided to create mailboxes and then copied all mailboxes (including emails and folders) to this new server.
First issue I got was i could not connect, until I figure out permissions were incorrect (for root after copy) and fixed it to be accessible by "popuser" (each user to access his mailbox).
Now i can connect, but new emails stay on qmail and can't be delivered to mailboxes.
Even after I have deleted the emalboxes and recreate them (now new emails are being delivered) all those emails in the queue can't be delivered.
I forced queue flush with "postqueue -f" but I get errors on the log:
(temporary failure. Command output: .qmail has prog delivery but has x bit set. (#4.7.0) 4.2.1 Message can not be delivered at this time )...
Which user should i give permissions (if that is the case) so tha both popuser (email user) and qmail/postfix can write on the mailboxes and deliver messages?
I just upgraded our Plesk 10.4.4 to 12.0.18 (on Ubuntu 10.04, about to be upgraded to 12.04). Now I get the dreaded 'queue file write error' in postfix on message delivery.
It tries to open /usr/lib/plesk-9.0/postfix-queue (which is not there) in this block in master.cf:
Code:
plesk_virtual unix - n n - - pipe flags=DORhu user=popuser:popuser argv=/usr/lib/plesk-9.0/postfix-local -f ${sender} -d ${recipient} -p /var/qmail/mailnames
127.0.0.1:10025 inet n n n - - spawn user=mhandlers-user argv=/usr/lib/plesk-9.0/postfix-queue 127.0.0.1 10027 before-queue
127.0.0.1:10026 inet n - - - - smtpd -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o smtpd_data_restrictions= -o receive_override_options=no_unknown_recipient_checks
127.0.0.1:10027 inet n n n - - spawn user=mhandlers-user argv=/usr/lib/plesk-9.0/postfix-queue 127.0.0.1 10026 before-remote
plesk_saslauthd unix y y y - 1 plesk_saslauthd status=5 listen=6 dbpath=/plesk/passwd.db
And on top of that, If disable all the milters/proxy and just try to deliver to plesk_virtual directly, the e-mail just disappears. Postfix thinks it was delivered, but it is not.
I also tried piping some text through /usr/lib/plesk-9.0/postfix-local with the same parameters postfix gives it, but also then nothing. No error, no exit code, no message in maildir.
There are a bunch of fixes around for the queue file write error, but nothing works because the nature of my problem is different. There is a KB article around for Plesk 9, which can hardly be useful.
I tried restoring postfix-queue from the backups, but if I try to use that, the mail.log eventually says:
Code:
Jan 30 01:20:00 ytechosting /usr/lib/plesk-9.0/psa-pc-remote[6621]: Message aborted.
I also used /usr/local/psa/admin/sbin/mchk to no avail: the only change it makes to my master.cf, is adding an empty line. And, I suspect it uninstalled my psa-courier, because it was gone at some point, and mchk was the only thing I did after knowing courier was still there.
How can the postfix config refer to that postfix-queue when it's not there? Is this even a valid master.cf file for Plesk 12?
I would like to add spdy under all nginx configuration as below
listen 443 ssl spdy;
How to add them globally ?
When i add a Domain or Subdomain through Plesk Panel, I get the following Warning :
Attention: relink-vhost-logs failed: mkdir: cannot create directory `./vps118861.ovh.net/logs': File exists ERROR: Cannot relink logs. Target directory '/var/www/vhosts/vps118861.ovh.net/logs' is in invalid state.
[URL]
I tried the 2 solutions but I still have the error... here are the results of the two commands :
[root@vps118861 logs]# ls -alh
total 2,3M
drwxr-xr-x 16 administrateur root 4,0K 20 janv. 13:59 .
[Code]....
When adding a subscription with a certain plan, I get this error"Error: The plan was not applied: Custom changes in PHP settings" almost instantly after I initiated the creation of the new subscription. Another service plan doesn't have the issue, and though I tried finding the reason why one works while the other doesn't I simply wasn't able to. The service plan in question is used for over 40 others without a problem just when I select it for a new subscription, I get the mentioned error message.I am using Plesk 12 on Linux, all latest updates installed.
View 1 Replies View Relatedi registered some new domains and wanted to add them via Plesk. Before i did that i got the stanard Plesk default page saying that i have to add the domains via plesk as usual.
When i did that the domain switched to a white page and is not able to load .html pages, i can load a phpinfo.php or install wordpress etc. but when i try to load a simple .html file with css or something, i only get a whitepage..
i dont know why this is happening, other domains from december are working fine, new ones wont. the error.logs are empty and even after a whole server restart it wont work.I´m using Ubuntu 14.04 LTS Server 64bit + Plesk 12.0.18
