Plesk 12.x / Linux :: Bounce Emails Are Getting Stack In Queue

Sep 13, 2014

All bounce emails are getting stack in queue (deferred). I tried a few suggestions I found around but nothing changed.

Ubuntu 12.04
Postfix
Plesk

View 3 Replies


ADVERTISEMENT

Plesk 11.x / Linux :: Qmail - Emails Not Delivered To Mailboxes / Stay In Queue

May 26, 2014

I'm having a hard time figuring why me emails are not delivered to mailboxes.

A bit of context:
OS: Ubuntu 12
Plesk pannel: 11.5

This server was supposed to be a new server (upgrade) from a previous who was working correctly (Also Linux with Plesk but both older versions).

After new server installed and websited up and running, I decided to create mailboxes and then copied all mailboxes (including emails and folders) to this new server.

First issue I got was i could not connect, until I figure out permissions were incorrect (for root after copy) and fixed it to be accessible by "popuser" (each user to access his mailbox).

Now i can connect, but new emails stay on qmail and can't be delivered to mailboxes.

Even after I have deleted the emalboxes and recreate them (now new emails are being delivered) all those emails in the queue can't be delivered.

I forced queue flush with "postqueue -f" but I get errors on the log:

(temporary failure. Command output: .qmail has prog delivery but has x bit set. (#4.7.0) 4.2.1 Message can not be delivered at this time )...

Which user should i give permissions (if that is the case) so tha both popuser (email user) and qmail/postfix can write on the mailboxes and deliver messages?

View 4 Replies View Related

Email Queue :: Exim Delivery Queue Size Currently Has 3000 Emails

Aug 12, 2008

I get an alert that The exim delivery queue size currently has 3000 emails in it waiting to be processed.

View 5 Replies View Related

Plesk 12.x / Linux :: Bounce Message Templates - Postfix

Aug 27, 2014

Is it possible to get Plesk working with different bounce message templates? I'd like to make messages in my Polish language to make people know what the bounce problem is. How can I make plesk not to overwrite the main.cf and bounce directive ?

View 2 Replies View Related

Plesk 11.x / Linux :: Change Bounce Message In Mail (Postfix)

Aug 23, 2012

How can i change the content of the bounce email?

I'm using Postfix 2.7.1 on Debian 6 with Plesk 11.0.9.

Currently the text of a bounce mail shows:

This is the mail system at host example.org.

Your message could not be delivered to one or more recipients. It's attached below.

For further assistance, please send mail to postmaster. If you do so, please include this problem report. You can delete your own text from the attached returned message.

The mail system

<_plesk_bounce_example.org@localhost.localdomain> (expanded from
<ttt@example.org>): This address no longer accepts mail.

And I'd like to get rid of address <_plesk_bounce_example.org@localhost.localdomain>.

I added the bouce file template to Postfix's config by:

postconf -e 'bounce_file_template = /etc/postfix/bounce.cf'
Restarted postfix.

Config related to bounces:

Code:
~ # postconf | grep bounce
2bounce_notice_recipient = postmaster
address_verify_sender = $double_bounce_sender
backwards_bounce_logfile_compatibility = yes
bounce_notice_recipient = postmaster

[Code] ....

Well, where can i change the template for bounces, now?

View 4 Replies View Related

Handling Bounce Emails Automatically

Dec 16, 2007

Now that bbounce.com had closed down, does anyone know of a good hosted, non-boogietools solution for combating bounce emails?

View 2 Replies View Related

Plesk 12.x / Linux :: Bounce Message - Limit For Outgoing Mail Exceeded

Oct 1, 2014

I just configured the limit for outgoing mail. It works well, but I have still some questions.

Normally the server sends bounce messages in HTML and in german. They look nice and what is much more important, the users who do not speak english are informed what is going on.

The message that is send, when the limit for outgoing mail is exceeded uses a different template. It is delivered in plain text and after explaining in german that the mail could not be send, it states the reason in english.

Is there any way to edit this bounce message, so that a translation could be added?

I had some users complaining that the server is not working, because they tried again and again to send a mail and kept the counter over the limit. For they did not understand what was causing it.

View 4 Replies View Related

Plesk 12.x / Linux :: Spam In Mail Queue

Jun 25, 2015

I have Spam in the Mail Queue.

How can I detect, where it come from, or how can I avoid it ?

View 3 Replies View Related

Plesk 11.x / Linux :: Mail Stays In Queue?

Jan 11, 2015

On the server, there is installed a WordPress installation. Mail from this WordPress installation never reaches for example suscribers. Almost all mail remains in the Queue and will be deleted after 7 days. Could it be because I do not have an SSL Certificate? %

View 1 Replies View Related

Plesk 11.x / Linux :: Mail Queue Grows Up?

May 22, 2014

My mail queue is growing up. I've stopped qmail but the queue goes on growing I must have an script running injecting mail in the queue, how can I find the script? I looked the running process (ps ) but I can not find anything (there is a lot of process!!!!)

View 4 Replies View Related

Plesk 11.x / Linux :: Qmail Email Messages Always In Queue

Nov 17, 2014

I have a server(godaddy) with plesk. It was all working well till 8 - 10 days ago. I didnt notice it one week later where I started receiving a lot of failed mail notices. Then on investigation, there were more then 50K spam mails in the mail queue and the mails that were supposed to be sent(registration, forgot password) were also held up in the queue. I found the source of the spam and fixed that.

Also I cleared the mail-queue. Now when I try to send out a test message, it still gets held up in the mail queue. But I can send a test mail to the same domain (info@mydomain.com). All new user registration mails are also held up and this is greatly affecting the site.

View 1 Replies View Related

Plesk 11.x / Linux :: Mail Not Being Sent Properly - Remaining In Queue

Jan 11, 2015

I am relatively new in Plesk and have problems with mail not being sent properly. On the server, there is installed a WordPress installation. Mail from this WordPress installation never reaches for example suscribers. Almost all mail remains in the Queue and will be deleted after 7 days. Could it be because I do not have an SSL Certificate? I use:

Plesk 11.5
CentOS 6.6
postfix
Log file + configuration

View 1 Replies View Related

Plesk 12.x / Linux :: Mail Stuck In Queue When Sent To External Email

Jul 8, 2015

I can receive email from all accounts and all domains.

The problem is that when sending an email to an external email (gmail., hotmail, outlook.com .... etc) this is sent to mail queue and do not leave that place.

View 10 Replies View Related

Plesk 12.x / Linux :: Can't Remove Or Clear Mail From Queue In Panel

Jun 15, 2015

Version 12.0.18. Using QMail.

If I attempt to remove even a small message from the mail queue, using the panel interface, the screen grays slightly but nothing happens. If I refresh the screen after several minutes, I'll sometimes get the following message:

"This operation is taking too long. Check the results in a few minutes."

Switching to Postfix eliminated the problem. But with Postfix, all of my Mailman lists (scores of them) broke, so I had to switch back -- and the problem reappeared.

View 3 Replies View Related

Plesk 11.x / Linux :: Configure Event To Monitor Email Queue?

May 19, 2014

How can I configure an event so when the number of emails in the queue exceeds a certain number then I am notified on the Mobile Plesk Server Monitor?

View 7 Replies View Related

Plesk 12.x / Linux :: Adding New Mail Handler Before Queue For Spam?

Nov 24, 2014

It is posible add new mail handler before queue for spam? Example:

mail_handlers_control --add --priority=10 --executable=/usr/local/psa/handlers/hooks/spam --name=spam --enabled --queue=before-queue --type=recipient-domain --mailname=domain.com --context=text

I need for scan relay mail ....

View 1 Replies View Related

Plesk 12.x / Linux :: Upgrade 10.4.4 - Postfix Queue File Write Error

Jan 29, 2015

I just upgraded our Plesk 10.4.4 to 12.0.18 (on Ubuntu 10.04, about to be upgraded to 12.04). Now I get the dreaded 'queue file write error' in postfix on message delivery.

It tries to open /usr/lib/plesk-9.0/postfix-queue (which is not there) in this block in master.cf:

Code:

plesk_virtual unix - n n - - pipe flags=DORhu user=popuser:popuser argv=/usr/lib/plesk-9.0/postfix-local -f ${sender} -d ${recipient} -p /var/qmail/mailnames
127.0.0.1:10025 inet n n n - - spawn user=mhandlers-user argv=/usr/lib/plesk-9.0/postfix-queue 127.0.0.1 10027 before-queue
127.0.0.1:10026 inet n - - - - smtpd -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o smtpd_data_restrictions= -o receive_override_options=no_unknown_recipient_checks
127.0.0.1:10027 inet n n n - - spawn user=mhandlers-user argv=/usr/lib/plesk-9.0/postfix-queue 127.0.0.1 10026 before-remote
plesk_saslauthd unix y y y - 1 plesk_saslauthd status=5 listen=6 dbpath=/plesk/passwd.db

And on top of that, If disable all the milters/proxy and just try to deliver to plesk_virtual directly, the e-mail just disappears. Postfix thinks it was delivered, but it is not.

I also tried piping some text through /usr/lib/plesk-9.0/postfix-local with the same parameters postfix gives it, but also then nothing. No error, no exit code, no message in maildir.

There are a bunch of fixes around for the queue file write error, but nothing works because the nature of my problem is different. There is a KB article around for Plesk 9, which can hardly be useful.

I tried restoring postfix-queue from the backups, but if I try to use that, the mail.log eventually says:

Code:

Jan 30 01:20:00 ytechosting /usr/lib/plesk-9.0/psa-pc-remote[6621]: Message aborted.

I also used /usr/local/psa/admin/sbin/mchk to no avail: the only change it makes to my master.cf, is adding an empty line. And, I suspect it uninstalled my psa-courier, because it was gone at some point, and mchk was the only thing I did after knowing courier was still there.

How can the postfix config refer to that postfix-queue when it's not there? Is this even a valid master.cf file for Plesk 12?

View 13 Replies View Related

I Keep Seeing Spam Emails In My Mail Queue

May 7, 2008

I contacted the guys who I pay to watch over my linux Cpanel server and I do not think they know how to fix the problem. When I look in my mail queue manager in WHM I always see these spam type emails. I also see that my site IP gets blacklisted on:

[url]

I delist and then it appears again a couple of days later. My server is only used to send emails such as registrations and user notifications that they have subscribed to. Could anyone please tell me how to get rid of the spam?

View 8 Replies View Related

Exim Mail Queue - Lots Of Emails

Jan 17, 2008

1) What would you guys say is average in terms of the # of emails in the Mail Queue?

2) What steps can be taken to tighten it up? If I start with a clean slate, it only takes about a week or less for my mail queue to reach 1000 or more. Most of it seems like junk mail.

View 0 Replies View Related

Command(s) For Telling Qmail To Dump All Emails In Queue?

Jun 28, 2009

How does one dump the contents of a Qmail?

That is emails that are waiting to be sent which are not going to be sent since they are bad emails so they are just stuck in the queue and are killing cpu resources, how does one tell Qmail to dump all unsent emails waiting in the queue?

View 3 Replies View Related

Exim Mail Queue Getting Stuck & Not Receiving Emails

Nov 19, 2007

my Exim mail outgoing queue is getting stuck and i cannot receive emails. Under WHM i have 50 odd emails, some 7 days old.

A small dump from /var/log/exim-mainlog is below:

2007-11-19 04:40:45 H=(H®) [202.57.142.156] sender verify defer for <jqyuehutmqluz@epilot.com>: could not connect to mail02.interchangeusa.com [63.251.210.81]: Connection timed out
2007-11-19 04:40:45 H=(H®) [202.57.142.156] F=<jqyuehutmqluz@epilot.com> temporarily rejected RCPT <morleyc@myemail.net>: Could not complete sender verify callout
2007-11-19 04:40:45 unexpected disconnection while reading SMTP command from (H®) [202.57.142.156]
2007-11-19 04:40:51 no IP address found for host 202.57.142.156.sta.isp-thailand.com (during SMTP connection from [202.57.142.156])
2007-11-19 04:40:57 no IP address found for host 202.57.142.156.sta.isp-thailand.com (during SMTP connection from [202.57.142.156])
2007-11-19 04:41:01 no IP address found for host 202.57.142.156.sta.isp-thailand.com (during SMTP connection from [202.57.142.156])
2007-11-19 04:41:04 no IP address found for host 202.57.142.156.sta.isp-thailand.com (during SMTP connection from [202.57.142.156])
2007-11-19 04:41:43 no host name found for IP address 77.94.106.13
2007-11-19 04:41:49 1ItxNu-0007E6-4s mail.global.frontbridge.com [207.46.51.86] Connection timed out
2007-11-19 04:41:49 1ItxNu-0007E6-4s == hmt@someaddress.com <HMT@someaddress.com> R=lookuphost T=remote_smtp defer (110): Connection timed out
2007-11-19 04:41:49 1ItxNu-0007E6-4s == jog@someaddress.com <JOG@someaddress.com> R=lookuphost T=remote_smtp defer (110): Connection timed out
2007-11-19 04:41:49 1ItxNu-0007E6-4s == mrl@someaddress.com <MRL@someaddress.com> R=lookuphost T=remote_smtp defer (110): Connection timed out
2007-11-19 04:42:29 H=(client-200.121.46.74.speedy.net.pe) [200.121.46.74] sender verify defer for <tecat@yahoo.de>: Could not complete sender verify callout
2007-11-19 04:42:29 H=(client-200.121.46.74.speedy.net.pe) [200.121.46.74] F=<tecat@yahoo.de> temporarily rejected RCPT <morleyc@myemail.net>: Could not complete sender verify callout
2007-11-19 04:42:29 unexpected disconnection while reading SMTP command from (client-200.121.46.74.speedy.net.pe) [200.121.46.74]

Everything was fine until about 7 days ago, i dont know why the config didnt change but since then its been dropping received emails and queueing on sends.

View 10 Replies View Related

Plesk 12.x / Linux :: Prevent IP In Emails

Sep 27, 2014

I use CentOS 5.5, Plesk 12 and Atmail. When I log in to

webmail.example.com

by browser and send emails to others, my home computer IP is attached to emails as X-Origin. I even used Thunderbird to send emails and same issue happens.

How can I prevent Qmail or (Atmail) to add my home computer IP to X-Origin? I am even OK if the server IP is attached to emails rather than home IP.

View 1 Replies View Related

Plesk 11.x / Linux :: Autoreply On Emails Via SSH

May 27, 2014

Is there a way to setup auto replies for emails via ssh?

I'm still having issues after our server provider destoried the database and refuse to fix it and need to urgently add an auto reply to an email.

View 1 Replies View Related

Plesk 12.x / Linux :: How To Block All Emails Except From One IP

Dec 19, 2014

I use a spam protection service. It works as following : -My DNS are configured to point to a server (sever A) which is configured to filter spams. -If an email is not a spam, the first server send it to my mail server (server B).

But some spammers found a way to bypass the protection : They send directly their email to my mail server (server A). So, i want to allow only emails coming from the server A IP.

View 2 Replies View Related

Plesk 12.x / Linux :: IP Not Send Emails

Jun 26, 2015

I have Plesk 12 with Centos 7.1. When I have to send emails with my IP gives error:

Subject 'Tews'
Server: 'smtp.xxxxxxxxx.com'
Windows Live Mail Error ID: 0x800CCC0E
Protocol: SMTP
Port: 25
Secure (SSL): No
Socket Error: 10060

However any other IP I can send emails. How do I fix this?

View 1 Replies View Related

Plesk 11.x / Linux :: Automated Emails For Server

Nov 17, 2014

I am using a Linux server together with Parallels v10.31 ... Unfortunately I get little or no real support from my host so and if I do it's cryptic.

I have been getting a large amount of emails from my server [hundreds daily].
I have attached a screen grab indicating type of email being sent.
I have created only one cron job and that was to reset the RAM on a regular base.

Also is it safe to update to the latest version without a major disaster happening....

View 1 Replies View Related

Plesk 12.x / Linux :: Duplicate Emails After Update To 12.0.18

Jul 17, 2014

After updating our server from plesk 11.5.30 to 12.0.18, one of our subscribers is receiving duplicate emails, a varying number anywhere between 5-15 of the same message!

Running plesk 12.0.18 on a CentOS 6.4 Cloud Server

View 2 Replies View Related

Plesk 12.x / Linux :: Sites Do Not Send Emails

Apr 30, 2015

Started after last update 12.0.18 Update #44 (on CloudLinux): I can send mail wia created mailboxes, but sites can not send mail, contact forms say "Failed to send your message." maillog file also do not indicate sending any messages from domains. Wordpress restore password claims:

"The e-mail could not be sent.
Possible reason: your host may have disabled the mail() function."
php.ini is default:
safe_mode = Off
disable_functions = is empty

The issue about not sending mail from domains was - old versions of LVE anf CageFS are incompatible with latest plesk update, updating them caused all sites in Cagefs to throw error 500 with log string: "SecureLVE jail error Invalid regexps: no match for path to base home directory". It was fixed by changing cagefs.base.home.dirs regexp to the real sites folder location. Enabling cagefs back removed one of the files it shouldn't:

"Removed file /var/cagefs/81/xxx/etc/php.d/soap.ini"
So be carefull to place necesssary files back.
For now everything works.
Click to expand...
Click for original message

View 8 Replies View Related

Plesk 12.x / Linux :: Allow Incoming Emails Only From One IP Address?

Apr 21, 2015

On my plesk server, i have several emails account. These email addresses should receive only emails send by a specific server. But for now, they can receive any email, including spam.

So, i would like to block all emails that are not coming from the allowed server.

How can i do this in plesk ? As i am not a very good server admin, can you tell me exactly what i need to do in plesk?

View 3 Replies View Related

Plesk 12.x / Linux :: Firewall Blocks Emails Every Day

Sep 14, 2014

I have a brand new and fresh installed server with:

Parallels Plesk v12.0.18
openSUSE 13.1

My Problem is, every day i have to click on activate in the settings of the firewall. Otherwise i have no Mail. The rest (Hosting, etc.) works fine.

No changes in the firewall settings where made, just a migration from my old server.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved