Plesk 12.x / Linux :: Adding New Domain Name Fail?
Nov 23, 2014Error: IP addresses for mail service of domain xxxxxx.com are not set
View 3 RepliesError: IP addresses for mail service of domain xxxxxx.com are not set
View 3 RepliesIs it possible to add a ssl to a IP number despite of domain name?
I would like to know if i can buy a ssl and set a IP on website address...
When i add a Domain or Subdomain through Plesk Panel, I get the following Warning :
Attention: relink-vhost-logs failed: mkdir: cannot create directory `./vps118861.ovh.net/logs': File exists ERROR: Cannot relink logs. Target directory '/var/www/vhosts/vps118861.ovh.net/logs' is in invalid state.
[URL]
I tried the 2 solutions but I still have the error... here are the results of the two commands :
[root@vps118861 logs]# ls -alh
total 2,3M
drwxr-xr-x 16 administrateur root 4,0K 20 janv. 13:59 .
[Code]....
I want to add a subdomain foo.bar.com to a master domain bar.com in the subscription bar.com. Normally this works but if I set the hosting type of the master domain to forward, I cannot add subdomains anymore. If I have already added a subdomain, I cannot change the hosting type of the master domain. Also it is not possible to add a second domain to the subscription anymore.
View 6 Replies View RelatedWe have a domain portal controller for windows. All the machines in the n/w are connected to it. So, when ever an user enters the user name and password it gets authenticated from the domain portal controller. So, my login can be accessed anywhere in the netowrk.
Example : my login is sabarishks which can be used in any machine under this domain controller.
But, if the system is installed with both linux and windows only windows username will be authenticated using the domain controller. Whereas, the linux users will work with in the system using /etc/shadow file. Hope, I am clear so far.
The requirement is same as above. The authentication mechanism for linux should work as windows. When ever an user is entered with a username and passwd, it should get authenticated from domain controller.
I mean, the user created in a windows machine should be used for linux login also. More importantly, It should work in all systems.
Which technology can be used to do this? Samba,Ldap, NFs or what?
I use Plesk 11.0.9 Update #53 on Windows 2008 SP2. Nameservers and mail server are external servers and fully working.I have a 'fake' web site (roundcube. local) in which I've successfully installed roundcube and I would use it as webmail.I've added a domain alias 'webmail2.domain.com' and it works like a charm.Now I've moved the main domain "domain.com" on the plesk server and I would like to add a 'webmail.domain.com' domain alias to the 'roundcube.local' website.If I try to do it, I receive this error:
"Error: Wrong prefix for domain alias"..Even if I try to add webmail.anotherdomain.com (not installed on the Plesk server) I get the same error.The error shows up either the host is configured to the Plesk machine or not.If I set the binding directly in IIS it works but I'd like to use the plesk to do this.
after every autoupdate mail and ftp fail. Only an psa stopall / start can solve this.
Using DEB7 Plesk 12.0.x
Whenever a user in my Cloudlinux powered Plesk Panel 12 tries to use the scheduled tasks, this is the error that is emailed to them...
excel: couldn't exec `/usr/local/psa/bin/chrootsh'
excel: No such file or directory
Does not matter what the task is, same error every time.
Even something as simple as wget [URL] .....
I recently purchased a dedicated server with Godaddy, I also registered a domain with same Godaddy.
Now when I tried to add a new domain in plesk, I got a warning message that "the domain is pointed to 192.198.XX.XX" which is different from my dedicated server IP. The message also says I should edit the DNS.
Now my question is What do I need to edit from the default dns plesk has assigned to my domain? Do I need to use the domain's default IP. I want to be able to host multiple website on my server...
I am trying to install plesk 12.0.18 via plesk-installer script after full purge of previously installed same version of Plesk.
Error appears:
Code:
cp: cannot stat `/lib64/libnss_*.so.2': No such file or directory
ln: failed to create hard link `/var/www/vhosts/chroot/etc/resolv.conf' => `/etc/resolv.conf': Invalid cross-device link
done
===> Cumulative APS controller upgrade (final stage) has been started.
ERROR while trying to find MySQL mysql platform driver for APSC Check the error reason(see log file: /var/log/plesk/install/plesk_12.0.18_installation.log), fix and try again What is APSC driver and how should I fix it?
I've just setup CentOS 6.6 with Plesk at my Hoster OVH. Now when I want to connect to the smtp server I get following message:
Code:
SASL LOGIN authentication failed: encryption needed to use mechanism
SASL auth is enabled in the main.cf also submission. I connect to tls://smtp.example.com:587 with my email and password.
I cant connect to the Database WebAdmin. If I click the icon, i got an "File not found." in the opening tab. Back in Plesk I get the following:
ERROR: PlexkFatalException
Server id is undefined?
I even cant connect via ssh to the mysql part of my server. But the server is running and both of my two wordpress pages run smoothly. I know this page: [URL] .... – but as I sad, cant enter die mysql.
It seems something is wrong with the permissions. I'm on the point where I just want to reset everything database related. But how?
I seem to be having a strange problem with Plesk 12, after adding about 23 domains, i cant seem to add any more domains.
While adding the domain, it just keeps syncing, and then when i click on the subscriptions i see the domain has been added, but i cannot customise it.
I would like to install mcrypt extension on my server and i don't find procedure .
My version is :
OSCentOS 6.3 (Final)
Version de Parallels Panel11.0.9 Mettre à jour #36, dernière mise à jour à Fév 8, 2013 06:32 PM
According to de Plesk Administrator Guide and according to the kb article: [URL] ...., Plesk Panel is suitable to enable multiple php versions After I performed the steps mentioned in the kb article, all seemed fine until somehow php-cgi and php-fcgi broke down after
Code:
# service httpd restart
After this event, all websites hosted on this particular the server only work running php as an apache module.
I am running Pleks Panel 12.0.18 #7 on top of CenOs 6.5 on this particular server, which means php version 5.3.3 is installed by default. PHP 5.3.3 also is was the php version for the "custom: false" php handlers (id's: cgi, fastcgi, module). Somehow all php handlers look like this:
Code:
# /usr/local/psa/bin/php_handler --list
id: display name: full version: version: type: cgi-bin: php-cli: php.ini: custom:
cgi 5.5.13 5.5.13 5.5 cgi /usr/bin/php-cgi /etc/php.ini false
fastcgi 5.5.13 5.5.13 5.5 fastcgi /usr/bin/php-cgi /etc/php.ini false
[Code]....
I would like to add spdy under all nginx configuration as below
listen 443 ssl spdy;
How to add them globally ?
When adding a subscription with a certain plan, I get this error"Error: The plan was not applied: Custom changes in PHP settings" almost instantly after I initiated the creation of the new subscription. Another service plan doesn't have the issue, and though I tried finding the reason why one works while the other doesn't I simply wasn't able to. The service plan in question is used for over 40 others without a problem just when I select it for a new subscription, I get the mentioned error message.I am using Plesk 12 on Linux, all latest updates installed.
View 1 Replies View Relatedi registered some new domains and wanted to add them via Plesk. Before i did that i got the stanard Plesk default page saying that i have to add the domains via plesk as usual.
When i did that the domain switched to a white page and is not able to load .html pages, i can load a phpinfo.php or install wordpress etc. but when i try to load a simple .html file with css or something, i only get a whitepage..
i dont know why this is happening, other domains from december are working fine, new ones wont. the error.logs are empty and even after a whole server restart it wont work.I´m using Ubuntu 14.04 LTS Server 64bit + Plesk 12.0.18
PRODUCT, VERSION, MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE
Plesk 11.5, 11.5.30 Update #44, last updated at April 30, 2014 03:25 AM, Centos 6.5 (Final), Linux 64bit
PROBLEM DESCRIPTION
When I try to add an extra MySQL server, running on a different server, I always get an error that the user has no admin access. But the user I created does have admin access to the database.
The remote database is a MySQL 5.5 on a Linux Ubuntu 12.04 LTS server
STEPS TO REPRODUCE
Tools & Settings -> Database Servers -> Add Databases server
ACTUAL RESULT
Error: Test connection to the database server has failed because the supplied account does not possess administrative privileges: Access denied for user 'admin'@'%' to database 'd536cedf97037e'
EXPECTED RESULT
A working database connection.
ANY ADDITIONAL INFORMATION
These queries are logged by MySQL:
140509 16:54:51 28 Connectadmin@10.1.0.162 as anonymous on
28 QuerySELECT VERSION()
28 Querycreate database `BUG115166_1374110215536CEC3816DD2` /*!40101 default charset=utf8 */
28 Querycreate database `bug115166_1374110215536cec3816dd2` /*!40101 default charset=utf8 */
28 Queryinsert into mysql.user (Host, User, Password) values ('%', 'bug115166_17546', password('BUG115166_1374110215536CEC3816DD2'))
28 QueryFLUSH PRIVILEGES
[Code] .....
If I just ignore this message, go to a subscription and create a database, then the database gets created just fine. It's just Plesk that thinks that something went wrong.
I have just added some extra IP addresses to my plesk panel from 1&1
CentOS 5.6 (Final)
Panel version11.5.30 Update #45
I have changed a couple of domains to have their own IP address - one marked as shared, the other as dedicated.
I can not log in to either via FTP since changing to a new IP address, the DNS has been changed to reflect this change over and resolves correctly.
I have used the domain name, original IP address and new IP address as the host address with filezilla on windows and mac, and smart ftp on windows.
All accept the username and password, but then all of them timeout with ETIMEOUT error.
Existing domains on the original IP address log in fine via FTP.
It is posible add new mail handler before queue for spam? Example:
mail_handlers_control --add --priority=10 --executable=/usr/local/psa/handlers/hooks/spam --name=spam --enabled --queue=before-queue --type=recipient-domain --mailname=domain.com --context=text
I need for scan relay mail ....
I am looking to add a mysql external source to my plesk. So far no difficulty.
My question is if I remove the mysql server where the currently plesk. I have to say to the panel get the information (psa, roudcube, horde) on the remote mysql to invez mysql local server?
When I set up spamassassin to store spam in the spam folder of my mailbox, it doesn't add any X-Sapm headers nor tags the subject. All I found so far was an old thread where a plesk employee stated that it will be fixed in 'a' future version.
I am on 11.5.30 Update #47.
Seems everythings is working normal when ignoring following error message, but everytime I add or change mail settings for a domain, I am getting this error:
Internal error.
ERROR:
Uncaught exception 'Zend_Log_Exception' with message '"/var/log/plesk/panel.log"
cannot be opened with mode "a"' in /usr/local/psa/admin/externals/Zend/Log/Writer/Stream.php:81
Stack trace: #0 /usr/local/psa/admin/plib/Plesk/Log.php(69): Zend_Log_Writer_Stream->__construct
[Code] .....
I'm trying to add multiple PHP version (current version installed: 5.5.13), using the official documentation. I always get 500 Internal Server Error after switching to the new version, with the following error_log content:
Code:
[Sat Jun 07 00:49:35 2014] [warn] [client XXX.XXX.XXX.XXX] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server
[Sat Jun 07 00:49:35 2014] [error] [client XXX.XXX.XXX.XXX] Premature end of script headers: index.php
Here you can view phpinfo() obtained running php54-cgi index.php from the command line. Same script doesn't work as FastCGI.
I'm trying to add PHP 5.4.29. Here is how I compiled it:
Code:
./configure
--prefix=/usr/local/php54
--with-bz2
--with-config-file-path=/usr/local/php54/etc
--with-config-file-scan-dir=/usr/local/php54/etc/php.d
--with-curl
[code]....
Switching back to PHP 5.5.13 and the script works fine (a simple phpinfo() output).How can I try to understand/debug what's wrong with the installation?
When I hit my server's domain it redirects me to one of the hosted sites' domain with a 302 redirect. It used to return the default plesk server page. How can I cancel the redirect?
View 2 Replies View RelatedCan I do this with Apache, or do I need something like Plesk or cPanel?
By the way, I have HSPComplete and Virtuozzo atm.
Trying to install the GD graphics library to a linux box.
Downloaded the file gd-2.0.34.tar.gz from [url]
Ran gunzip and tar thus expanding the files to a temp directory - as root.
The instructions say to run ./configure
I ran "sh ./configure" and I get the following:
Quote:
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking if we are building a Cygwin target... no
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details.
why the configuration fails?
way to convert and add some text(watermark) to videos in Linux.
I know ffmpeg can be used to convert video but i does not add text or water mark to video.
So what are my options?