Plesk 12.x / Linux :: Warning When Adding New Domain Or Subdomain?
Jan 20, 2015
When i add a Domain or Subdomain through Plesk Panel, I get the following Warning :
Attention: relink-vhost-logs failed: mkdir: cannot create directory `./vps118861.ovh.net/logs': File exists ERROR: Cannot relink logs. Target directory '/var/www/vhosts/vps118861.ovh.net/logs' is in invalid state.
[URL]
I tried the 2 solutions but I still have the error... here are the results of the two commands :
[root@vps118861 logs]# ls -alh
total 2,3M
drwxr-xr-x 16 administrateur root 4,0K 20 janv. 13:59 .
[Code]....
View 2 Replies
ADVERTISEMENT
Apr 23, 2015
I want to add a subdomain foo.bar.com to a master domain bar.com in the subscription bar.com. Normally this works but if I set the hosting type of the master domain to forward, I cannot add subdomains anymore. If I have already added a subdomain, I cannot change the hosting type of the master domain. Also it is not possible to add a second domain to the subscription anymore.
View 6 Replies
View Related
Jun 2, 2015
Is it possible to add a ssl to a IP number despite of domain name?
I would like to know if i can buy a ssl and set a IP on website address...
View 5 Replies
View Related
Nov 23, 2014
Error: IP addresses for mail service of domain xxxxxx.com are not set
View 3 Replies
View Related
Apr 7, 2015
I've got a customer that has a website at hisdomain.com . He created a subdomain called dev.hisdomain.com for the new version of his website. Now he wants to take it live. Had he created dev.hisdomain.com as a subscription instead of a subdomain, it would have been easy to "rename" the old site to old.hisdomain.com and then rename the new site to the current name.
Am I going to have to move all the files around at the command line or is there an easier way to switch around the sites? The server in use is CentOS 6.6
I thought that those were my options.
Click to expand...
Click for original message
View 6 Replies
View Related
Nov 28, 2014
Following configuration given:
Abo with "domain.com" - Hosting Type - Webspace (with E-Mail Services)
Subdomain "sub.domain.com" - Hosting Type - Forward
Customer asked us to activate Forward for "domain.com "to other Domain for 2 weeks - but as soon as a Subdomain points on a Domain - I can NOT change the Hosting Type anymore ... WHY???
If I want to change Hosting Type from Hosting to Forward for some weeks - it always deletes the whole Webspace for the Domain ... ?!?
1) Why can't I change Hosting Type when a Sub-Domain is created?
2) Why can't I tell Plesk to change Hosting Type WITHOUT deleting the whole Webspace ...
View 1 Replies
View Related
Sep 1, 2014
change the webmail from Plesk over
/usr/local/psa/admin/conf/templates/custom/domainWebmail.php
thats working without a problem if i change the Webmail Subdomain from one to another.
But i want to change the webmail from
webmail.domain.tld
to
domain.tld/webmail
The following change in domainWebmail.php does not work:
ServerAlias "<?php echo $VAR->domain->asciiName ?>/webmail"
<?php foreach ($VAR->domain->mailAliases AS $alias): ?>
ServerAlias "<?php echo $alias->asciiName ?>/webmail"
<?php endforeach; ?>
View 1 Replies
View Related
Apr 13, 2015
I am running a CentOS 6.5, 64-bit server with Plesk 12.0.18, and need to install a wildcard SSL for one of the domains/sub domains hosted on this server.
So you have the csr and private key installed (and domain.crt?), you just need to open..
1. COMODORSAAddTrustCA
2. COMODORSADomainValidationSecureServerCA
On your desktop and combine the two files into a new intermediate.crt file and upload that as the CA File.
But I'm not sure why you can't add it as text.
Click to expand...
Click for original message
View 7 Replies
View Related
Sep 28, 2014
I'm setting up a SAAS service which is built on top of Laravel. To put it simply the service itself knows whether its being called from a sub.example.com or just example.com and serves a correct response accordingly. So going to sub.example.com will use the same index.php file as example.com but the routes and controllers within the application will provide a different response. sub.example.com will show a tenant login page where as example.com will show a new tenant subscription page or something else.
So when someone new subscribes I add a new entry to the database with a subdomain name for them and when a request comes from that subdomain and they are logged in it will show them their information. Easy right.
There is a problem though with setting it up with Plesk. When I add a wildcard subdomain, it will look for /subdomains/sub/ for the files which is a bit problematic since I want it to serve the files from the same place as the domain example.com.
Is there a way to configure that so that regardless of the subdomain it will try and serve the exact same content as my main domain?
View 2 Replies
View Related
Oct 24, 2008
We have a domain portal controller for windows. All the machines in the n/w are connected to it. So, when ever an user enters the user name and password it gets authenticated from the domain portal controller. So, my login can be accessed anywhere in the netowrk.
Example : my login is sabarishks which can be used in any machine under this domain controller.
But, if the system is installed with both linux and windows only windows username will be authenticated using the domain controller. Whereas, the linux users will work with in the system using /etc/shadow file. Hope, I am clear so far.
The requirement is same as above. The authentication mechanism for linux should work as windows. When ever an user is entered with a username and passwd, it should get authenticated from domain controller.
I mean, the user created in a windows machine should be used for linux login also. More importantly, It should work in all systems.
Which technology can be used to do this? Samba,Ldap, NFs or what?
View 1 Replies
View Related
Jun 10, 2013
I use Plesk 11.0.9 Update #53 on Windows 2008 SP2. Nameservers and mail server are external servers and fully working.I have a 'fake' web site (roundcube. local) in which I've successfully installed roundcube and I would use it as webmail.I've added a domain alias 'webmail2.domain.com' and it works like a charm.Now I've moved the main domain "domain.com" on the plesk server and I would like to add a 'webmail.domain.com' domain alias to the 'roundcube.local' website.If I try to do it, I receive this error:
"Error: Wrong prefix for domain alias"..Even if I try to add webmail.anotherdomain.com (not installed on the Plesk server) I get the same error.The error shows up either the host is configured to the Plesk machine or not.If I set the binding directly in IIS it works but I'd like to use the plesk to do this.
View 3 Replies
View Related
Apr 25, 2014
I recently purchased a dedicated server with Godaddy, I also registered a domain with same Godaddy.
Now when I tried to add a new domain in plesk, I got a warning message that "the domain is pointed to 192.198.XX.XX" which is different from my dedicated server IP. The message also says I should edit the DNS.
Now my question is What do I need to edit from the default dns plesk has assigned to my domain? Do I need to use the domain's default IP. I want to be able to host multiple website on my server...
View 2 Replies
View Related
May 6, 2015
I seem to be having a strange problem with Plesk 12, after adding about 23 domains, i cant seem to add any more domains.
While adding the domain, it just keeps syncing, and then when i click on the subscriptions i see the domain has been added, but i cannot customise it.
View 3 Replies
View Related
Feb 11, 2013
I would like to install mcrypt extension on my server and i don't find procedure .
My version is :
OSCentOS 6.3 (Final)
Version de Parallels Panel11.0.9 Mettre à jour #36, dernière mise à jour à Fév 8, 2013 06:32 PM
View 19 Replies
View Related
Jul 16, 2014
According to de Plesk Administrator Guide and according to the kb article: [URL] ...., Plesk Panel is suitable to enable multiple php versions After I performed the steps mentioned in the kb article, all seemed fine until somehow php-cgi and php-fcgi broke down after
Code:
# service httpd restart
After this event, all websites hosted on this particular the server only work running php as an apache module.
I am running Pleks Panel 12.0.18 #7 on top of CenOs 6.5 on this particular server, which means php version 5.3.3 is installed by default. PHP 5.3.3 also is was the php version for the "custom: false" php handlers (id's: cgi, fastcgi, module). Somehow all php handlers look like this:
Code:
# /usr/local/psa/bin/php_handler --list
id: display name: full version: version: type: cgi-bin: php-cli: php.ini: custom:
cgi 5.5.13 5.5.13 5.5 cgi /usr/bin/php-cgi /etc/php.ini false
fastcgi 5.5.13 5.5.13 5.5 fastcgi /usr/bin/php-cgi /etc/php.ini false
[Code]....
View 7 Replies
View Related
Aug 14, 2014
We get a lot of warning for one and the same domain during backups:
Code:
Warning: hosting "domain.com"
Encoding::encode: source UTF-8 encoding declared, but invalid UTF-8 sequence occured. Falling back to ISO-8859-1
How may we solve it?
View 9 Replies
View Related
Feb 27, 2015
When I click upgrade now at the plesk panel I get following error:
Parallels Panel pre-upgrade check... WARNING: The proftpd FTP service will fail to start in case the support for IPv6 is disabled on the server. Please check [URL] .... for details.
Is it safe to proceed? I guess it shall be automatically?
View 9 Replies
View Related
Feb 19, 2013
I've got a plesk 11 server and I've created a subdomain for a client but I need to have this as a full domain for the SSL certificate. Is there a way to convert a subdomain to a full domain without deleting the subdomain and creating a new hosting subscription?
View 2 Replies
View Related
Sep 18, 2012
I have a client that has a subdomain shop.xxxx.com. This subdomain needs its own SSL and own IP address for it. Right now its listed as a subdomain under xxxx.com. Also, the xxxx.com has another SSL and IP.
Since there doesnt seem to be any way to do this in plesk, I had to create the subdomain as a regular subdomain and then manually manipulate IIS to change the IP and add the ssl mapping.
If I try to add a new domain, it automatically tags it with the WWW.
Is there any way to just create a new domain without the www infront of it, so I can move shop.xxxx.com from a subdomain to a primary domain that stands alone...
I haven't played around much with the new iis 7+, but in older iis, you needed a dedicated IP for each SSL certificate.
View 3 Replies
View Related
Dec 27, 2014
I would like to add spdy under all nginx configuration as below
listen 443 ssl spdy;
How to add them globally ?
View 4 Replies
View Related
Aug 25, 2014
When adding a subscription with a certain plan, I get this error"Error: The plan was not applied: Custom changes in PHP settings" almost instantly after I initiated the creation of the new subscription. Another service plan doesn't have the issue, and though I tried finding the reason why one works while the other doesn't I simply wasn't able to. The service plan in question is used for over 40 others without a problem just when I select it for a new subscription, I get the mentioned error message.I am using Plesk 12 on Linux, all latest updates installed.
View 1 Replies
View Related
Feb 5, 2015
i registered some new domains and wanted to add them via Plesk. Before i did that i got the stanard Plesk default page saying that i have to add the domains via plesk as usual.
When i did that the domain switched to a white page and is not able to load .html pages, i can load a phpinfo.php or install wordpress etc. but when i try to load a simple .html file with css or something, i only get a whitepage..
i dont know why this is happening, other domains from december are working fine, new ones wont. the error.logs are empty and even after a whole server restart it wont work.I´m using Ubuntu 14.04 LTS Server 64bit + Plesk 12.0.18
View 3 Replies
View Related
Jul 23, 2015
I'm using this script as a cron to generate DKIM keys for the domains I have. It's an easy script. And it does it's job just OK. I have the necessary software installed and configured.
The way it works is:
The script check if the domain in queue has a record for it. If it doesn't, OpenDKIM generates a one time DKIM record for mail._domainkey that I am entering to my dns records for all the domains I have.
After creating the DKIM record, it checks and deletes mail._domainkey records if there's any. Then adds the generated DKIM to plesk dns zones and disables/enables greylisting to create the appropriate dns entry.
If it does have a DKIM recors on the hdd already, then it removes
mail._domainkeyand
TXT o=-entries.
After that it basically adds the already generated DKIM record and it disables/enables the greylisting for each domain in order to recreate "TXT o=-"
Up till here, it works fine. I can see these entries when I check the DNS Settings. They are there.
But whenever I run this script either via cron or manually, I get an error message on my panel: (You can check the screenshot as well)
Code:
Warning: The DNS zone was modified. If you would like to apply DNS template changes to this zone, either click the 'Apply DNS Template Changes' button on this page or choose the 'Apply the changes to all zones' option in Server Administration Panel > Tools & Settings > DNS Template Settings > Apply DNS Template Changes.
And unless I manually click "Apply DNS Template Changes" for EVERY SITE it doesn't go away.
So, I was wondering, is there a way to scriptize that command? Or how to prevent it?
This is the command I use to generate DKIM and add it to Plesk database, also if any such record exists, delete and re-write it:
Code:
#!/bin/sh
ADMIN_PASS=`cat /etc/psa/.psa.shadow`
MYSQL_BIN_D=`grep MYSQL_BIN_D /etc/psa/psa.conf | awk '{print $2}'`
mysql="${MYSQL_BIN_D}/mysql -N -uadmin -p${ADMIN_PASS} psa"
query="select name from domains;"
domains=`echo $query | $mysql `
for i in ${domains}; do
echo "Processing $i"
[Code] ....
View 4 Replies
View Related
Jan 24, 2015
i am getting this error on a fresh installed machine:
Code:
root@srv1 ~ # /usr/local/psa/admin/sbin/httpdmng --reconfigure-domain domain.tld
Warning: Current locale is unusable. Using 'C' instead.
View 6 Replies
View Related
Aug 1, 2012
How can I set dedicated IIS Application Pool for each domain/subdomain? I only can found the setting assign one application pool for each subscription. But my subscription have two subdomain (one subdomain have virtual directory to share to other subdomain) and would like have two application pools.
View 7 Replies
View Related
Mar 21, 2015
I am using Web admin edition .I need to create two subdomains namely sub1.example.com and sub2.example.com with different IP address. So i need to create two webspaces since a webspace cannot have two domians pointing to two different IP. So now to I can create two webspaces set to different IP. But to create sub1.example.com in one webspace and sub2.example.com in another webspace , i need main domain example.com in both the workspace. But if try to create example.com in second webspace it already exists.Because it exists in another webspace. Actually i dont want to create example.com in both webspace. i need to its subdomain in different webspace.
So one solution is to create example.com and sub1.example.com in one webspace and create another webspace using Adding new webspace and specifying domain name as sub2.example.com. But i don't know does the second subdomain will work properly without creating main domain.
View 1 Replies
View Related
May 9, 2014
PRODUCT, VERSION, MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE
Plesk 11.5, 11.5.30 Update #44, last updated at April 30, 2014 03:25 AM, Centos 6.5 (Final), Linux 64bit
PROBLEM DESCRIPTION
When I try to add an extra MySQL server, running on a different server, I always get an error that the user has no admin access. But the user I created does have admin access to the database.
The remote database is a MySQL 5.5 on a Linux Ubuntu 12.04 LTS server
STEPS TO REPRODUCE
Tools & Settings -> Database Servers -> Add Databases server
ACTUAL RESULT
Error: Test connection to the database server has failed because the supplied account does not possess administrative privileges: Access denied for user 'admin'@'%' to database 'd536cedf97037e'
EXPECTED RESULT
A working database connection.
ANY ADDITIONAL INFORMATION
These queries are logged by MySQL:
140509 16:54:51 28 Connectadmin@10.1.0.162 as anonymous on
28 QuerySELECT VERSION()
28 Querycreate database `BUG115166_1374110215536CEC3816DD2` /*!40101 default charset=utf8 */
28 Querycreate database `bug115166_1374110215536cec3816dd2` /*!40101 default charset=utf8 */
28 Queryinsert into mysql.user (Host, User, Password) values ('%', 'bug115166_17546', password('BUG115166_1374110215536CEC3816DD2'))
28 QueryFLUSH PRIVILEGES
[Code] .....
If I just ignore this message, go to a subscription and create a database, then the database gets created just fine. It's just Plesk that thinks that something went wrong.
View 2 Replies
View Related
Jun 2, 2014
I have just added some extra IP addresses to my plesk panel from 1&1
CentOS 5.6 (Final)
Panel version11.5.30 Update #45
I have changed a couple of domains to have their own IP address - one marked as shared, the other as dedicated.
I can not log in to either via FTP since changing to a new IP address, the DNS has been changed to reflect this change over and resolves correctly.
I have used the domain name, original IP address and new IP address as the host address with filezilla on windows and mac, and smart ftp on windows.
All accept the username and password, but then all of them timeout with ETIMEOUT error.
Existing domains on the original IP address log in fine via FTP.
View 2 Replies
View Related
Nov 24, 2014
It is posible add new mail handler before queue for spam? Example:
mail_handlers_control --add --priority=10 --executable=/usr/local/psa/handlers/hooks/spam --name=spam --enabled --queue=before-queue --type=recipient-domain --mailname=domain.com --context=text
I need for scan relay mail ....
View 1 Replies
View Related
Jun 15, 2015
I am looking to add a mysql external source to my plesk. So far no difficulty.
My question is if I remove the mysql server where the currently plesk. I have to say to the panel get the information (psa, roudcube, horde) on the remote mysql to invez mysql local server?
View 3 Replies
View Related
