I am currently on a VPS plan. My usage has become so much I need to switch to a different plan out of a different state. So with the new plan I will have a new IP address. What do I have to do to make the switch?
View 1 RepliesI want to redirect a website to a particular URL so that the address bar shows the same URL and not the destination URL. I know it is possible via URL masking, however, I want it in such a way that whenever somebody clicks on any link in the website, the address bar should still show the original URL. To put it in simple words, Suppose I want to redirect [url] to [url]. Now if there is a link named contact/index.htm and somebody clicks on it the address bar should display [url]and not redirect to [url]
How can it be possible using URL Rewrite method in .htaccess file?
I have been trying to change an IP address on a customers Linux(RH9) server and I am getting errors, Can some on point/push me in the correct direction.
I am editing /etc/sysconfig/network-scripts/ifcfg-eth0 and am getting this message,
"1. Quit editing this file, because another edit session is active on this file.Continuing to edit will result in two versions of the same file. The one that is written last will overwrite the other one, resulting in loss of changes. The text "ifcfg-eth0" indicates that the process
editing this file runs on the same computer. When working over a network you will not see this message, because the process will be running on another computer.
2. Recover a previously crashed edit session."
This is a stand alone server and noone else uses this server.
I have tried to use the vim rercover command but no luck.
I am more use to using pico than vi, but pico is not installed.
I'm using cPanel, and I'd like to change the IP address of all domains hosted on my server. When I click the "Edit DNS Zone" link in WHM, the IP address of all accounts is wrong. Do I have to change it manually for all of them?
View 4 Replies View RelatedThe Plesk Health monitor is sending alerts to the wrong email by default. How can it be changed?hanged" notifications by "Health Monitor" are triggered by the default address that has been setup in My Profile > Profile & Preferences or is there a different way of changing this setting.
View 1 Replies View RelatedBasically what I want to do is to change the "From: "email address for system user "Plesk Administrator" when sending the automated notification with subject "Parallels Panel Scheduler notification". Where would I do this?
Plesk version is 11.5
When I change an email address on a user's account I get this error?
Code:
Internal error: mailmng-mailname failed: Unable to open dir /var/qmail/mailnames/mydomain.com/stevebrown/@attachments: No such file or directory System error 2: No such file or directory
Message mailmng-mailname failed: Unable to open dir /var/qmail/mailnames/bullochrec.com/stevebrown/@attachments: No such file or directory System error 2: No such file or directory
File Agent.php
Line 243
Type PleskUtilException
Using Cloudlinux 6.6 and Plesk 12
My customer has an external facing Apache server that is acting as a reverse proxy to two internal applications. They have:
- external addresses for each app which resolve to different ip addresses, so app1.their_domain.com and app2.their_domain.com resolve to 77.3.170.10 and 77.3.170.11 respectively.
- the Apache server has two network interfaces with ip addresses 192.168.10.10 and 192.168.10.11
- the external ip addresses resolve to the above internal addresses
- the firewall between the Apache server and the internal app servers is configured to allow traffic from 192.168.10.10 to reach app_server1, and traffic from 192.168.10.11 to reach app_server2, both using port 7777.
I have configured a virtual host in httpd.conf for each ip, i.e.
Code:
<VirtualHost 192.168.10.10:80>
...
ProxyPass /app http://app_server1:7777/app
ProxyPassReverse /app http://app_server1:7777/app
RewriteRule ^/$ /app/app1 [R,L]
...
<VirtualHost>
and
Code:
<VirtualHost 192.168.10.11:80>
...
ProxyPass /app http://app_server2:7777/app
ProxyPassReverse /app http://app_server2:7777/app
RewriteRule ^/$ /app/app2 [R,L]
...
<VirtualHost>
This works fine in that the external address are being routed to the correct application, however the firewall is blocking requests to the second app as it appears the requests are coming from the Apache servers 'primary' ip address 192.168.10.10 instead of 192.168.10.11.
Is it possible to send requests using the ip address from the relevant VirtualHost?
Windows server 2008
Apache 2.2
I am using virtuozzo firewall to secure access.
I enter 58.27.175.211/255.255.255.0 for Source Address and Netmask for port 22.
But still I can connect using 58.181.103.217 or 58.27.151.120.
Second is it possible to enter two different ip address in source address?
I just bought a new ip address and want to setup this new ip as my server's main ip, making the 'existing main ip' as the secondary ip.
Which means, this new ip will be the server's default ip address for all services, including when connecting to other server.
I'm using CentOs 4.5 and swsoft's panels: HSPcomplete & Virtuozzo Power Panel, and Webmin.
The problem usually goes like this:
- I can't access the webserver
- I'll try to restart httpd, and I'll get
Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:443
To fix this, I run
[root@www1 ~]# lsof -i tcp:443
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
perl 11307 apache 4u IPv6 476943447 TCP *:https (LISTEN)
There is always leftover process that is causing the restart to fail. Once i force kill the process, I am able to restart httpd properly.
Now it is ok if this just occurs once in a while, but this problem keeps repeating itself almost everyday at 4am server time (cron time?). What can I do to permanently fix this?
Everytime I deleted an Ip set up by WHM, this one nameserver always comes back and deletes one that I already set up.
69.50.221.151 NS19.NSHOSTER.NET
No matter what I change it to, that NS19.NSHOSTER.net keeps overwriting an NS that i set. What's wrong? When i try to delete with WHM
Quote:
Removing Nameserver Ip 69.50.221.151
Sorry, the nameserver ip 69.50.221.151 cannot be removing since it is still registered with an ICANN register.
I can only go through ssh.
My Linux box has a set IP address that never changes. However, I am switching my server from one collocation to another so in the process my IP address will be different.
The last time I switched my box, I had my ISP admin change the IP address within my linux box, but now that might not be an option.
So in linux, CentOS 4.1, how do I change the IP address on the box?
As much as I can remember, I had to change it in:
/etc/netstart
But I also remember there is another file that needs to be edited within the server to change the IP.
I have been with this hosting company for almost five years now and until today the service has been excellent. I am having massive ftp issues. I have 41 different domains that I run for a variety of projects. Needless to say I keep each website in a different folder. I just tried to switch one of my blogs from blogger to wordpress. Blogger won't let me have my domain back and keeps blocking it with a 404 error. But that is a separate issue. I tried using one of my extra domains and pointing it at my new blog folder. But it keeps bouncing back to my root directory. I contacted 1and1 and they reset the server, but now they are blaming me for the issue. I can access the blog through it's subdirectory but I can't post the blog there.
Anyways, I am not ready to move over all of my websites, but I do want to move my blog to a new host. I am mainly hoping that I can escape 1and1 and blogger in one move if I change the host of this one website. It's funny I have been happy for years and recommended them to friends, but now I am very disappointed. Can someone recomend a reliable host? I am looking for one with a cheap lowend package to start off. If I end up staying I will need a lot of bandwidth as I have a podcast that had a lot of traffic. Basically, there are so many companies that I just can't tell which ones are reliable. That's my main concern. Also I use SQL a lot. Thanks!
I'm setting up my dns records for a backup mailserver and setting up another ns record in case of server / datacentre problems.
My question is, do I need to specify the ip address of the external hostname and the external namserver in the local dns record?
e.g mail.mydomaim.com in A **.***.**.**
then add mail.outside-domain.com in A **.***.**.**.
I dont think its necessary but want to double check.
I'm changing my webhost after getting screwed around with countless downtimes and now their own site is completely down.
I'm looking for a new host, and had been looking at alot of review sites. After looking at a few of them, found that they were obviously fakes with almost 100% good reviews for some hosts, completely dissing some other hosts, and the complete opposite on some other sites.
Looking for recommendations for your own host, do state your site too so I can try out the response.
Criteria
excellent uptime
responsive support + live support chat
h-sphere preferred, but not a must have (I like having subdomains in directories at the same level as domains)
does not ridiculously overload their servers (well, who can tell?)
good site response time
budget at 10usd per month
allows many domains/sites, no need for super high bandwidth as I just host many small sites
PHP with .htaccess access + imagemagick/gd
I currently work for a small company that has a website hosted by a local hosting company. We have not been happy with them and are planning on switching hosts. Now I know that you are suppose to update your name servers for your domain name to point to your web host's name servers. Problem is I don't know how to get access to do this (all of this stuff was setup many years ago way before I got here).
Using whois I see our domain registrar is DomainBank.com but I have no account information to log in and change our name servers. How do I go about doing this? Is it possible our existing host did all of this originally and they have an account with DomainBank instead?
Hostingzoom Is changing!
we are Hostingzoom's customer from 2005! we had a payment due on a service and hostingzoom suspended all of our services! how come it's possible? to all users I want to let you know to take care about this changes .. hostingzoom was the best but it looks like that it's no more like before! maybe the company is sold!
Take Care About your accounts, have a daily backup of your accounts and do not trust to buy more from them! we lost lots of our clients "about 500", and we face critical problem with what they did to us for $80! and we had problem with our credit card issuer right now! ... HostingZoom is changing take care ..
I currently have my account with streamline.net (utter crap never use that company). I want to move 2 of my domains off this company and on to another one.
What is the process in doing this and as anyone any good recommendations for hosting companies to use?
I have IIS on my computer and I want to start using a php driven forum (SMF) on my web site. Before I upload the files I need to check the following settings are on:
the engine directive must be On.
the magic_quotes_sybase directive must be set to Off.
the session.save_path directive must be set to a valid directory, or empty.
the file_uploads directive must be On.
the upload_tmp_dir must be set to a valid directory, or empty.
I cant find anywhere within IIS where these directions maybe found. Can anyone point me in the right direction?
I have a domain registered with Dotster and my NameServers point to Verio who is my webhost. My MX Records at Verio point to Appriver who handles my email. I'd like to get Verio totally out of the picture and just host my site at Dotster and still keep the email at Appriver. However, I'm not quite sure the order in which to change the various settings.
Do I just change the Name Servers at Doster to point to Dotster instead of Verio and then use Dotster's DNS to point the MX Records to Appriver? Would I then disable the MX Records at Verio? What about propagation of these changes...would I lose email traffic?
Do I need to change the TTL? I'm really not sure about the order of the steps.
ive been a member of these forums for a few months now, mainly scouring for CSS tips and solutions. However, i've recently purchased Kevin Yanks book; Build Your Own Database Driven Website Using MYSQL and PHP, to work through. Annoyingly i'm having a problem with the initial MySQL setup which i cant seem to find a solution to on these forums or even Google. The book instructs the user to edit the my.ini file by adding the 'old-passwords' command, but no matter what i try i cannot save any additional content to this file. i just get the error... "Cannot create C:/programfiles/mysql/mysql server 5.0/my.ini". I fear im overlooking something very simple here. Has anyone else experienced this? The only thing that comes to mind is that im running Vista, which the book predates.
View 2 Replies View Relatedto change system date back and forth.
Of course 'date -s' doesn't work on VPS. Using zic and timezones > /etc/localtime could help up to (almost) 24 hours, but dates are out of range.
Some systems can enable something like defying "Time Drift" as on some Xen versions (as shown below), but unfortunately my provider apparently doesn't support it.
# set independent_wallclock
# echo 1 > /proc/sys/xen/independent_wallclock
Is there any other way to change date on a VPS?
I'm trying to change the ssh port on one of my servers, I have edited the sshd_config file and ssh_config. Changed the port, then enabled the port on APF. Restarted both APF and SSH.
Tried logging in via the port I specified, would not let me. Tried the default port, logged in fine. Why won’t it change to the port I specify?
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteBase /
RewriteRule !^index.php$ index.php [L]
</IfModule>
Hi,
This is my current .htaccess
As you see, it redirect all pages to index.php except index.php itsel
How do I modify it so that the exception is not just index.php but also channel.php or index3.php?
i've set all folders,sub folder and files under this folder to be 777 since it is a folder for my users to upload attachments~
however this is the problem. users all failed to upload because the permission of the new folder created by apache for the users to store their attachment are set to 755, which i wanted them to be 777. (those 777 folders were from old server.)
if u take a look at the pic attached , you know what i meant. does anyone have any idea of how i can change the permission for this whole foder to be 777 even with folder created by apache?
i tried chmod -r 777 attachment, but it says operation not permitted @@
Need to make requested URL - remove "//pdf" off the end.
Thought:
If //pdf exists in the URL - remove it.
Thought it would be something like belowe added to the httpd_conf file but not sure.
RewriteRule ^//pdf / [R]
to change my dedicated server IP, for certain reason. Besides changing nameserver, can anyone guide me to do it via SSH? I've no CP.
View 4 Replies View RelatedHow can i preview my homepage without changing my nameserver?
It was something like: ....