If I change DNS using Plesk Panel the DNS server does not send a notification to the slave server, however if I change DNS directly through the DNS Manager it does send the notifications. Looking around the only thing I can find is an old post [URL] .... I'm not sure if this is related.
View 7 RepliesI have Plesk and SmarterMail running on a server.SmarterMail is setup as 'require SMTP authentication before relaying' email (I think this is standard practice).I cannot get Plesk to send any emails, such as forgotten password reminders and notifications.Plesk tries to send but gets a "550 Authentication is required for relay" error... which is expected, because I can't find anywhere in Plesk to enter the authentication details for the email account being used to send (relay) the emails.
I don't want to setup a 'whitelist' or 'bypass relay authentication' for 127.0.0.1 as I have had a spam issue with this previously.where to enter the username / password details so Plesk Panel can authenticate and send it's emails?
I have setup Slave DNS using plesk 12. But it is not creating the zone in slave server. I could see log in /var/log/messages of slave server. But DNS zone is not creating. I have followed the KB "[URL] ...." for setup.
Nov 4 13:31:25 li456-187 named[16905]: received control channel command 'addzone testnith.com { type slave; file "testnith.com"; masters { 108.161.131.59; }; };'
Nov 4 13:31:25 li456-187 named[16905]: received control channel command 'refresh testnith.com'
Nov 4 13:31:25 li456-187 named[16905]: received control channel command 'addzone testnith.com { type slave; file "testnith.com"; masters { 108.161.131.59; }; };'
I have a Windows/Plesk installation (Windows DNS), what is the best way to make a slave DNS server?I have two more servers without Plesk, windows and linux, one of then could be my slave server, how to accomplish that?
View 1 Replies View RelatedOn one CentOS 6.5 Plesk 12.0.18 install (with all MUs applied) each time an admin logs in a notification is displayed ("Plesk was successfully updated. View detailed information on the updates.") and once a week the panel generates an email notification (Plesk panel updated successfully).
Other Plesk 12.0.18 servers that are set to automatically update aren't generating this email notification or displaying the "green" notification upon login to the Plesk Panel. Is there a flag, tmp file, or a DB trigger that isn't being set properly to cause this?
I installed Route 53 extension to manage a slave DNS server but when a add or remove some domain the process does not complete, Plesk stays loading without finish domain creation.
When I disable the extension, Plesk create and remove domains without any problem.
What could be happening?
after upgrading to plesk 11 i get this error (Image attached)
so basicaly i cant do nothing..
I have a merak mail server with a lot of domains and users. I have installed a plesk 12.0 on a new windows 2012 r2 server together with a fresh installation of merak . Now I want to import all domains and users from my old merak server to my plesk server, but I can't figure out how to do it. I can import them to the installed merak mail server on the plesk server, but I can't find a way to import them into my plesk.
View 6 Replies View RelatedAfter Plesk Panel upgrade to 12.x I found a warning showing at Home>Tools & Settings> Database Servers
Warning: Unable to determine the TCP port number used by Microsoft SQL server '.SQLEXPRESS': TCP/IP protocol is not enabled in the server network configuration or the server is configured to use dynamic TCP ports.
To allow your customers to automatically configure firewall for remote database access, manually configure the SQL server to listen on a specific fixed TCP port.Click to expand...
I have Plesk 12 on CentOS 7. I have only MSMTP installed not Postfix or Qmail. No matter what settings I use in the external SMTP settings the mail is never sent and I cannot find any error logs.
I have tried gmail smtp, sendgrid smtp and another smtp server that I own.
This is not a firewall issue as far as I can tell since if I install postfix it just works. Also any Wordpress or Joomla installs that use SMTP settings with gmail or sendgrid work just fine.
Screenshot for information only. I used accurate usernames, passwords, etc.
↑
Quick update. I tried the recommended CentOS 7 with the same result. Can installing Plesk 12 without a mail server and using the msmtp relay option actually works?Click to expand...
Health Monitor Module is installed and running on server, but not visible under Server Administration Panel > Home > Server Health on Plesk Panel 11.0.9 update #7. Is there a trick to configuring home to show it and/or a direct way to launch view of server health?
View 17 Replies View RelatedI recently setup Plesk 11.0.9, and I want to setup SimpleDNS into my plesk panel. I installed SimpleDNS 5.2 on the server, and I followed the instructions in this post --> [URL] ...., but when I refresh the components page in the panel, I never have the Simple DNS.I setup port 8053 in SimpleDNS' HTTP API, I accept any ip address, I remove the firewall and Plesk can not see it.
View 2 Replies View RelatedI'm trying to rename a domain in my panel and keep getting the following error:
Code:
Error: Execute websrvmng --rename-vhost "--old-name=domainb.com" "--new-name=domaina.com" failed with error code 1: External component has thrown an exception. In IIS7NativeProvider module Exception type: System.Runtime.InteropServices.SEHException at _CxxThrowException(Void* , _s__ThrowInfo* ) at IIS7ApplicationPools.copy(IIS7ApplicationPools* , auto_ptr<IApplicationPool>* , basic_string<wchar_t,std::char_traits<wchar_t>,std::allocator<wchar_t> >* srcName, basic_string<wchar_t,std::char_traits<wchar_t>,std::allocator<wchar_t> >* dstName)
Running
Code:
websrvmng --rename-vhost "--old-name=domainb.com" "--new-name=domaina.com"
In the Windows command line gives the following error:
Code:
Cannot find domain by name 'domaina.com'
Haven't found many leads on the web as to what this might be.
how to enable AWStats for the domains on my server. In our old Panel (v9.5), I could go Domains > DOMAIN.TLD > Web Hosting Settings, and on that page there was an option to choose between Webalizer/AWStats/None. In version 11.5, I don't see that option.
When I look on the actual Windows server, I do see an AWStats directory along with a Webalizer directory in "C:Program Files (x86)ParallelsPleskAdditional", so I think it's installed...? AWStats comes along as part of the Plesk Panel license, right?
I can see the Webalizer stats when I browse to [URL] ...., but I'd much rather see AWStats.
I Have a WinServer 2008R2SP1 with plesk 11. I am able to access to PControl panel with https://localhost:8443 but not from outside the server (https://serverIP:8443)
The firewall if OK, allowing port 8443.
I tried to open Administration page for my Parallel Plesk Panel, but all the time it's show Loading and nothing happens. It's also not opening on the server trough https://localhost:8443 System redirect me to the address https://localhost:8443/sso/api.php?api=/ui and 10 minutes it's loading...
View 4 Replies View RelatedWe are getting an error every time that i try to add a new IP on Plesk panel. I go to "Tool and settings" than "IP address", "Add ip address" on fields i already try to ip:
xx.xx.xx.xx/32
and
xx.xx.xx.xx/submask
every time that i click on OK, the button become loading an never finish....
Updates ran over the weekend and I can no longer login to the Plesk Panel. I'm getting the following PHP error: Fatal error: Call to undefined function get_gpc() in D:Plesadminhtdocsindex.php on line 3Click to expand...
View 1 Replies View RelatedI need to upgrade from smartermail 5.5 to latest smatermail 9 . Let me know any option via plesk panel
Plesk 10.4.4 is currently installed my server. Going to upgrade plesk 11
From what I can tell the vhosts on my Plesk Panel keep resetting (I think around once a day), all my webstatistics (AWStats) begin to 404 and I have a Wordpress installed in the root of a domain which is now displaying the "Web Server's Default Page" (any sub-directory of the Wordpress install gives a 404 such as the wp-admin directory). The way I've fixed this temporarily is to run "%plesk_cli%
epair.exe" --update-vhosts-structure. I do not see any errors or warnings in the event viewer or log files.
On another note is there a way to increase the logging for event viewer to include more than just errors (such as informational) to make it easier to track down issues?
Ive bought a wildcard certificate, and its working fine when i use URL....But it does not work when i go to hURL.... seems like the control panel chosing a default one for this.
Ive tried to make the certificate server default, changed the one in ip section to the wildcard one, and made the woldcard one default, nothing changed..
when I try to change main domain, e.g. domain.ru to domain.com, I see that Application Pool changed only for main domain, all additional domain use old Application Pool.
View 1 Replies View Relatedi want to uprage my plesk panel to 12. But i have this problem
"Parallels Panel pre-upgrade checking... 'wmic.exe' is not recognized as an internal or external command,
operable program or batch file.
FATAL_ERROR: Unable to get IP address"
How can I restore/update permission for all domains -> only web-stats permission?
P.S. When users rename username for FTP access, web-stat remove old username and don't add new username to nfts permission.
I have a website works with Crystal Report, it worked with Windows server 2008 and Plesk Panel 10, now I upgrade my windows server to 2012 and plesk 11.5 and I gave this error: Server Error in '/' Application.....Please see the attached file (Error Image)
I check many things, for example I run the website on windows server 2012, just With IIS and it works fine, then I install the plesk 11.5 and take the error again.. now I sure 99% the error related to plesk....
I see that, when subscriptions is suspended, backup manager continuous working.
View 2 Replies View RelatedI have the problem described here: [URL]
But my Plesk's license allows to use MS SQL Servers.
This began to happen after upgrading Plesk 11 to 12.
In psa Database, in DatabaseServers table it appears. If I delete and add back into Plesk, it shows me no error, but neither added to the database servers.
I have vps server with win server 2008 and Plesk 11.5.30. when i am trying to copy Mssql Database trough the panel i have an error: " Unable to copy database ". In the %plesk_dir%adminlogs under the php-error.log i have this error:
"[05-Feb-2014 13:31:43 Europe/Helsinki] ERR (3) [panel]: Database cloning failed.
[05-Feb-2014 13:31:43 Europe/Helsinki] ERR (3) [panel]: Task failed: id=163, pid=9700, type=db-clone, error=Unable to clone database."
Plesk Panel for Windows 11.5
Windows 2012
MailEnable 7.5
- Is it possible to secure webmail with SSL through the Plesk Control Panel?
- Is it possible to secure webmail per domain with SSL through the Plesk Control Panel?
I'm Unable to Login to Control Panel, this issue started few days back, in that time i'm using Plask v11.5, When i try to log in browser try to log in and few minutes after it showing Error 500, Application error, I try to run reconfigurator.exe to verify & fix the Plesk installation, everything updated fine but issues still exist today i decided to upgrade to v12 and i upgrade to V12, everything installed fine and but still login issues there.
This time whey i try to login, i'm not getting any error message, but after some time i got mail from the server "alarm level changed. Server health parameter "Services > Plesk CPU usage" changed its status from "green" to "red"."