Plesk 11.x / Linux :: Upgrade BIND Must Be Restarted At Reboot To Work
May 20, 2014
Recently upgraded to Plesk 11.5 & upgraded to the latest CentOS kernel. Whenever I reboot the server DNS services do not work, can't view any websites hosted on the server etc.
Once I either restart BIND through Plesk Panel or
Code:
# service named restart
Everything works perfectly.
My var/log/boot.log shows named started [OK]
When I run
Code:
# service named status
Immediately after reboot everything looks normal, despite not resolving DNS until restarted.
I ran
Code:
# ceckconfig --list
And both httpd & named services are displaying all 'off' on every runlevel. But, obviously named service is starting automatically, maybe by psa?
Should httpd & named be listed as on, is this the problem?
View 1 Replies
ADVERTISEMENT
Aug 7, 2014
Just upgraded from Plesk 11.5 to 12. (CentOS 6.4)
Everything is working but when I reboot the server using the Plesk CP it never comes back up. No CP, no domains, no SSH.
If I reboot it using the 1&1 CP it re-boots fine.
View 1 Replies
View Related
Nov 19, 2014
I can't install or remove anything. when i click on continue it's just refreshes the page and come backs to the list.
I have checked error log and the latest error log is ERR [panel] Specified column "isAllowed1 is not in the row.
And i don't think this error related to the problem. When I click on continue it does not create any line in the error log.
View 10 Replies
View Related
Jun 30, 2014
Since upgrading to 12.0.18 Update # 5 fail2ban stopped working.
Code:
[nimda4597@xxxx fail2ban]# service fail2ban status
fail2ban-server (pid 1881) is running...
Status
[Code].....
View 8 Replies
View Related
Dec 1, 2014
i use Plesk on a vserver which was offering it in version 11.x, i upgraded to 12.0.18, then i installed Dovecote on the panel. Everything went fine. Mail server is working.BUT sieve does not allow me to login and create filters.I tried telnet against 4190, and it works:
Connected to mail.xxxxxxxx.xxx.
Escape character is '^]'.
"IMPLEMENTATION" "Dovecot Pigeonhole"
"SIEVE" "fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave imapflags notify"
"NOTIFY" "mailto"
"SASL" "PLAIN LOGIN DIGEST-MD5 CRAM-MD5"
"STARTTLS"
"VERSION" "1.0"
OK "Dovecot ready."
But when i use my sieve plugin for thunderbird OR access plesk's webmailclient Roundcube opening the filter module, it doesnt work. On Thunderbird i see the loading animation, thats it. On Roundcube it says "Unable to connect to sieve server".
Looks like something is missing. I can definitely access 4190 on my server from anywhere. So no firewall issue. I didnt change anything on configs, since plesk is handling it.Roundcube log doesnt give me anything. I dont even see logs added (to syslog or mail.*) while i try to connect.
View 4 Replies
View Related
Sep 17, 2014
I has Parallels Ples 11.X with Cent OS 6.5 and yesterday i tried to upgrade to PLESK 12.0.18.
Now, I can't start the apache module because it´s impossible to create the config file
The issue is:
Details: [2014-09-17 19:46:27] ERR [util_exec] proc_close() failed
[2014-09-17 19:46:34] ERR [panel] Apache config (14109759800.30476400) generation failed: Template_Exception: Can not restart web server: Service /etc/init.d/httpd failed to start
Service /etc/init.d/httpd failed to start
file: /usr/local/psa/admin/plib/Service/Driver/Web/Server/Apache.php
line: 104
code: 0
Can not restart web server: Service /etc/init.d/httpd failed to start
Service /etc/init.d/httpd failed to start
I try with cp the certifies and writing a new private key but it didn't work.
I try to reinstall the Plesk but it didn't work.
View 8 Replies
View Related
Jul 21, 2015
We made a reboot via Plesk to our dedicated server and all are working properly (ftp, emails) but we cannot see any domain's site on web explorers.
View 4 Replies
View Related
Jun 5, 2014
PRODUCT, VERSION, MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE
Plesk Panel 11.5.30#46
Centos 6.5
AuthenticAMD, AMD Opteron(TM) Processor 6272
PROBLEM DESCRIPTION
Upon a shutdown or reboot, the system shuts down sw-collectd. Further along, it will end wdcollect and the following will occur:
init: psa-wdcollect main process (pid) killed by KILL signal
init: psa-wdcollect main process ended, respawning
wdcollect[pid]: Language en-US is used for sending e-mail messages.
wdcollect[pid]: Failed to connect to database server during the startup. New attempts will be made if needed.
wdcollect[pid]: Server started
I believe this is preventing the un-mounting of drives which in the end freezes the shutdown process on:
Please stand by while rebooting the system...
After this occurs, I have to force the VM off and then boot again.
I have tried the following:[URL] .....
View 1 Replies
View Related
May 6, 2014
When I reboot my centOS 6.5 + Plesk 11.5 server, Nginx doesn't start and every time I need to go to Server > IP Addresses and click Reread IP.Then Plesk says that need to repair one of these ips, I click repair and then Nginx can start. ( I have 3 ips [2 ipv4 and 1 ipv6] )
View 3 Replies
View Related
Jun 7, 2009
my datacenter says that they have not had power failures(lol yeh right) but i cant seem to figure out why my server seems to be rebooting randomly. so far its happened early 3-5am my times today and yesterday, just its happened 4x more times this morning.
im not sure if cpanel is sending me bind start failures because its not set to auto start up on reboot or if it might be related... but the server seems fine.
View 6 Replies
View Related
Dec 29, 2014
Today I reboot my server. And after that my sites are not opening.
View 2 Replies
View Related
Aug 22, 2014
So Everything was going great! Until I needed to reboot, and then after that only Plesk panel worked not my IP or any domains setup with it.
BUT when I restart Nginx it all starts working again! (Had to /usr/local/psa/admin/bin/httpdmng --reconfigure-all to get the domains to go to the right directory though)
But now everytime I reboot the server Nginx has to be restarted
Is this Normal?
I`m running Plesk 12 fresh clean install yesterday
CentOS 7 64Bit
View 11 Replies
View Related
Feb 8, 2015
I have a problem with my plesk panel. Ever since I rebooted my server it won't load the IP:8443 page at all.
View 5 Replies
View Related
Nov 10, 2014
Two month ago I installed plesk 11.5 on my server (with centos 6 or 7 I don't remember) Then i added my domain.com by clicking on "Add New Domain" and using the auto dns system configuration. All worked great. During this period, Parallels Plesk was auto updating to 12.x 1 week ago, I restarted my server, and my website was down (I think because DNS problem with 12.x or ip problem or port closed...)
So I formatted my dedicated server, then I reinstall Parallels Plesk 11 (with centos 6) and the website worked great. Then I re-formatted my dedicated server, then I installed Parallels Plesk 12 (with centos 7) and the website did not work.
So I think the problem come from plesk 12
This is how I process to configure my website on plesk 12 :
1. This is a 1&1 domain and an OVH dedicated server.
So I configure DNS like that :
1rst name server : nsXXXXXX.eu
2nd name server : sdns2.ovh.net
2. On plesk, i click on "Add New Domain"
Capture : [URL] ...
3. I wait for DNS propagation but it doesn't work...
Capture of DNS checker [URL] ....
View 2 Replies
View Related
Aug 27, 2012
SETUP:
CentOS 6.3, 64 bit.
Plesk 11.09, Update #10.
I enabled Watchdog in Plesk.
It works fine.
However, it doesn't start up by itself after a server reboot.
I can start it manually with the following command:
/usr/local/psa/admin/bin/modules/watchdog/wd --start (which I have done by adding it to /etc/rc.local)
Shouldn't Plesk do this automatically?
View 19 Replies
View Related
Apr 2, 2015
I run a centos 6 plesk 12 server with around 7 domains.All runs perfect untill a 3 hours ago. The server was offline.After reboot plesk starts up without a problem but the sites keep offline. While httpd and mysqld and psa runs perfect.Also cannot find error messages in the messages, error_log or anything. How to proceed debugging?
View 2 Replies
View Related
Jun 8, 2014
OSCentOS 5.6 (Final)
Panel version11.0.9 Update #61
The system is up-to-date; last checked at June 6, 2014 03:32 AM
I use pingdom to alert me when sites go down. It would happen only once every few weeks, and I'd just reboot the VPS from my provider's control panel, however in the last 24 hours it has started doing it more and more often. The only change I have made in this time is to delete a few unused web sites.
When I get alerted, I check the the domains and they won't load. I look at the plesk control panel page thought and that does work.
I can SSH in, but I can't see anything that might work in the messages log.
I removed the plesk control panel error as that only seemed to happen once and is not happening anymore.
I saw quite a few entries in the /var/log/secure log and so I added iptables rules to only allow SSH access from my own IP and to DROP all other requests. It seemed fine for a while, but after 12 hours it has started becoming unresponsive again until reboot.
View 4 Replies
View Related
Mar 2, 2015
I set a new Plesk 12 server (Debian 7.8) and migrate some domains from a plesk 11.0.9 server.After this, FTP does not work. I can connect but I receive this error:
Error:The data connection could not be established: ETIMEDOUT - Connection attempt timed out..And no list of folder or files found. Not one domain, any domain.I restart xinetd and fil2ban but still same problem. Via control panel I can see the files but not via FTP.
View 4 Replies
View Related
Apr 1, 2015
I have a Plesk host that I am tasked with upgrading. It started with openSUSE 11.4 on Plesk 10.4 and I have upgraded it all the way to openSUSE 12.2 on Plesk 11.09 (fixed minor issues with pop3d and mysql locking on the way). The next upgrade was supposed to be 11.5, but the option to upgrade it never shows up. I have re-instated our support license so I know the license is OK, and also checked that 11.5 supports openSUSE 12.2. The update log doesn't really tell me much either:
Code:
Release PLESK_12_1_18 contains no any build for this OS
Release PLESK_12_1_17 contains no any build for this OS
Release PLESK_12_1_16 contains no any build for this OS
Release PLESK_12_1_15 contains no any build for this OS
Release PLESK_12_1_14 contains no any build for this OS
[code]....
View 1 Replies
View Related
Jul 31, 2014
While running the plesk auto installer script and upgrading I get the following error.
Components validation detected at least one important issue:
Parallels Panel pre-upgrade check...
dpkg-query: no packages found matching psa-atmail
dpkg-query: no packages found matching psa-horde
dpkg-query: no packages found matching libapache2-modsecurity
WARNING: IP address registered in Plesk is invalid or broken: xxx.xxx.xxx.xxx
Panel version: 11.5.30 Update #47, last updated at June 19, 2014 07:32 AM
OS:
Distributor ID:Debian
Description:Debian GNU/Linux 7.6 (wheezy)
Release:7.6
Codename:wheezy
Upgrade log [URL] ....
View 4 Replies
View Related
Jun 16, 2014
we have bought Plesk 11.5 3 months ago.
Is it possible to upgrade to 12? How do I have to proceed for the upgrade?
View 5 Replies
View Related
Feb 5, 2015
For a Magento shop I want assign a dedicated IP to a domain. When I choose this second IP in “Subscriptions” --> Change Hosting Settings” and then select this IP under “Tools and Settings --> IP Addresses” as dedicated (or shared too) for this domain, calling the domain results in the Webserver´s default Plesk Page.
The Shopsite is not shown, but was working well with the shared standard IP.
Calling the IP directly with the browser shows the start page of the shop in raw HTML ( no CSS ).
Choosing a link results in a “Not found” page.
View 4 Replies
View Related
Jun 27, 2015
I'm running Ubuntu LTS 14 with Plesk 12 installed and I registered an domain name under subcriber/customer on my Plesk panel and I created a mail which was already registered under that name in the old server from which I removed the domain completely. I have installed Roundcube and Horde from Plesk installer, and at the avalaible webmail services are shown: Atmail,Roundcube and Horde all activated and avalaible. I try to choose one of them for the email but none of them works. When I try to access the webmail from the address: URL....it shows me default Plesk page. From the address: URL.... it says not found. The same for Horde and Atmail.
Its very weird because the same webmails services are working correctly under my main webspace with other domain: URL....I've tried changing something to the default plesk page from the file manager and it works so the domains seems to be connected with the server properly.
View 7 Replies
View Related
Oct 15, 2014
I have multiple domains on a single IP address and many require SSL Certificates.
I have enabled SNI in /etc/psa/psa.conf so it now says "SNI_SUPPORT true" as it was originally set to False. Setting this to TRUE then enabled the SSL option in 'Websites & Domains'.
I then purchased and installed the SSL Cert and activated it in the domain settings. On a dedicated IP address, this would work.
When I checked the certificate. it was not using the assigned SSL cert, instead it was using the Servers default certificate (plesk) that is assigned to the shared IP address.
When I check, I get the error message: "[warn] RSA server certificate CommonName (CN) `plesk' does NOT match server name"
I then rebooted the server and it made no difference. I changed the domain to a spare dedicated IP address, and the SSL Cert was certified correctly (it used the correct SSL Cert). When I changed it back to the shared IP address, it reverted back to the shared IP address' SSL cert. So the new SSL Cert was being ignored.
For info: currently running 11.0.9 on Centos 5 and I'm testing this with latest IE, FF, Chrome so it accepts TLS Server Name Indication.
View 2 Replies
View Related
Dec 11, 2014
I installed Roundcube in Plesk 12 through the link: URL....But it doesn't work. I adjusted the mailsettings for a domain to use Roundcube. With the fresh created emailaccount and you click on the webmailicon, it loads the following url but the page does not exists: URL....Aren't there any instructions for using RoundCube with Plesk? After adding Roundcube as an component are there more steps involved to get Roundcube up and running with plesk?
View 19 Replies
View Related
Jun 17, 2013
Over the weekend, I upgraded from Plesk 10.3 to Plesk 11.5, using the updater in the control panel. Everything seemed to go well. However, this morning I've noticed that some, not all, email accounts are having trouble logging into the server to send and receive mail. Other accounts are working fine.Via POP, I get this error: -ERR Temporary problem, please try again later
Via SMTP, I get this error:
535 auth failure
I see this in the maillog:
Jun 17 07:15:05 [server] courier-pop3d: LOGIN FAILED, user=[username], ip=[::ffff:xxx.xxx.xxx.xxx]
Jun 17 07:15:05 [server] courier-pop3d: authentication error: Input/output error
And this... Jun 17 07:24:50 [server] smtp_auth: FAILED: [email address] - password incorrect from [host] [xxx.xxx.xxx.xxx]
I replaced the server name, username, host, and IP in the above.
Here are the steps I've tried so far.
- Changing the password using the control panel.
- Updating the number of daemons in authdaemonrc
- Restarting the services
View 3 Replies
View Related
Jun 27, 2014
I just upgraded my Plesk on Ubuntu (vServer) yesterday. But after the upgrade I couldn't login to the Panel anymore because all I get when I try to reach the panel (https://panel.examplesite.com:8443) is a white screen.
I rebooted the server and restarted the panel as well as Apache several times with no change.
View 10 Replies
View Related
Sep 29, 2014
I have upgraded php 5.5 using below steps,
===
sudo add-apt-repository ppandrej/php5
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install php5
==
Its also upgrading Apache from 2.2 to 2.4 and after installation, it break my Apache configuration and getting configuration errors when adding domains from Plesk etc.
Is there any proper way to upgrade PHP 5.5 in Plesk 12.0(Ubuntu 12.04)...
View 1 Replies
View Related
Oct 12, 2014
How to upgrade mySQL from version 5.1 to version 5.5 on linux. We're running CentOS version 6.3 with Plesk 11.09.
The approach outlined here [URL] .... seems like the way to go. I want to be sure that I don't adversely affect our installation.
If it is at all relevant we're running a Joomla 2.5 site.
View 5 Replies
View Related
Feb 8, 2015
How to upgrade PHP to PHP 5.4 on CentOS 6 ?
View 4 Replies
View Related
