How to upgrade mySQL from version 5.1 to version 5.5 on linux. We're running CentOS version 6.3 with Plesk 11.09.
The approach outlined here [URL] .... seems like the way to go. I want to be sure that I don't adversely affect our installation.
If it is at all relevant we're running a Joomla 2.5 site.
I'm still using Plesk 11.5.30 and MySql 5.5.39. That was discribed here how to update. But i need to have a MySql 5.6.5 (minimum) for some software (This version is over 2 years old). I'm using CentOs 6.5. and PHP 5.4.33
how to do this, whitout breaking plesk 11.5.30??
I see that Plesk 12 supports MySQL 5.6, but the server I am running is Ububtu 14.04 LTS and comes with 5.5.
I need to make 5.6 available but I can see no way of doing it without breaking Plesk (I already tried just installing it from command line with apt-get install and had to restore the whole server from backup!) - there is no option for MYSQL in Plesks updates & upgrades menu ...
I am planning on upgrading to php 5. I really don't need to upgrade to mysql 5 but do you guys think I will face problems with PHP 5.2.9 and Mysql 4.1.20 working together...
I am planning on doing the upgrade like this (if I decide to upgrade PHP and MYSQL all together)
1. STEP
nano /etc/yum.repos.d/CentOS-Base.repo
2. STEP
change the enabled=0 to 1 as follows
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
#baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=1
gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4
priority=2
protect=1
4.STEP
yum install php-xml
5.STEP
yum update httpd* php* mysql*
and restart the server do you guys think I will face any problems.
If I am only upgrading the php to latest I am planning on doing
1.STEP
I will do the 2.STEP above
2.STEP
wget -q -O - http://www.atomicorp.com/installers/atomic.sh |sh
yum install php-xml php-pdo
yum install php-pear
mv /etc/php.ini.rpmnew /etc/php.ini
and reboot
I am planning on upgrading to php 5. I really don't need to upgrade to mysql 5 but do you guys think I will face problems with PHP 5.2.9 and Mysql 4.1.20 working together...
I am planning on doing the upgrade like this (if I decide to upgrade PHP and MYSQL all together)
1. STEP
nano /etc/yum.repos.d/CentOS-Base.repo
2. STEP
change the enabled=0 to 1 as follows
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=[url]
release=$releasever&arch=$basearch&repo=centosplus
#baseurl=[url]
gpgcheck=1
enabled=1
gpgkey=[url]
priority=2
protect=1
4.STEP
yum install php-xml
5.STEP
yum update httpd* php* mysql*
and restart the server do you guys think I will face any problems.
If I am only upgrading the php to latest I am planning on doing
1.STEP
I will do the 2.STEP above
2.STEP
wget -q -O - [url]
yum install php-xml php-pdo
yum install php-pear
mv /etc/php.ini.rpmnew /etc/php.ini
and reboot
In order to install moodle, I need to upgrade MySQL from 5.1 to 5.5. I have gone through one of the KB articles [URL], but it's not very clear.
Can I upgrade it through Add/remove Components from Install and update products just like it can be done for PHP?? I see MySQL Server 2005, 2008 and 2012,
Plesk has mysql installed with it to run properly and I need to upgrade that version to the latest. Now I am not talking about the mysql server that it provides for me to create databases on. I am talking about the version it uses to run.
View 3 Replies View RelatedSince we upgraded to Plesk 11.5 or (I'm not shure) the last Update 12, user can not import MySQL-Databases anymore.
If the user open phpMyAdmin for import and select the database and click on Ok, phpMyAdmin does nothing.
I heard that could be a problem with JQUERY and I checked the files in ParallelsadminhtdocsdomainsdatabasesphpMyAdminjsjquery and all files seems to be there.
Only if I check the source of the phpMyAdmin Import-Website it seems, there is a problem with jquery-1.6.2+fix-9521.js.
But how I can fix this problem for all Windows-Servers.
I have a Plesk host that I am tasked with upgrading. It started with openSUSE 11.4 on Plesk 10.4 and I have upgraded it all the way to openSUSE 12.2 on Plesk 11.09 (fixed minor issues with pop3d and mysql locking on the way). The next upgrade was supposed to be 11.5, but the option to upgrade it never shows up. I have re-instated our support license so I know the license is OK, and also checked that 11.5 supports openSUSE 12.2. The update log doesn't really tell me much either:
Code:
Release PLESK_12_1_18 contains no any build for this OS
Release PLESK_12_1_17 contains no any build for this OS
Release PLESK_12_1_16 contains no any build for this OS
Release PLESK_12_1_15 contains no any build for this OS
Release PLESK_12_1_14 contains no any build for this OS
[code]....
While running the plesk auto installer script and upgrading I get the following error.
Components validation detected at least one important issue:
Parallels Panel pre-upgrade check...
dpkg-query: no packages found matching psa-atmail
dpkg-query: no packages found matching psa-horde
dpkg-query: no packages found matching libapache2-modsecurity
WARNING: IP address registered in Plesk is invalid or broken: xxx.xxx.xxx.xxx
Panel version: 11.5.30 Update #47, last updated at June 19, 2014 07:32 AM
OS:
Distributor ID:Debian
Description:Debian GNU/Linux 7.6 (wheezy)
Release:7.6
Codename:wheezy
Upgrade log [URL] ....
we have bought Plesk 11.5 3 months ago.
Is it possible to upgrade to 12? How do I have to proceed for the upgrade?
Over the weekend, I upgraded from Plesk 10.3 to Plesk 11.5, using the updater in the control panel. Everything seemed to go well. However, this morning I've noticed that some, not all, email accounts are having trouble logging into the server to send and receive mail. Other accounts are working fine.Via POP, I get this error: -ERR Temporary problem, please try again later
Via SMTP, I get this error:
535 auth failure
I see this in the maillog:
Jun 17 07:15:05 [server] courier-pop3d: LOGIN FAILED, user=[username], ip=[::ffff:xxx.xxx.xxx.xxx]
Jun 17 07:15:05 [server] courier-pop3d: authentication error: Input/output error
And this... Jun 17 07:24:50 [server] smtp_auth: FAILED: [email address] - password incorrect from [host] [xxx.xxx.xxx.xxx]
I replaced the server name, username, host, and IP in the above.
Here are the steps I've tried so far.
- Changing the password using the control panel.
- Updating the number of daemons in authdaemonrc
- Restarting the services
I just upgraded my Plesk on Ubuntu (vServer) yesterday. But after the upgrade I couldn't login to the Panel anymore because all I get when I try to reach the panel (https://panel.examplesite.com:8443) is a white screen.
I rebooted the server and restarted the panel as well as Apache several times with no change.
I have upgraded php 5.5 using below steps,
===
sudo add-apt-repository ppandrej/php5
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install php5
==
Its also upgrading Apache from 2.2 to 2.4 and after installation, it break my Apache configuration and getting configuration errors when adding domains from Plesk etc.
Is there any proper way to upgrade PHP 5.5 in Plesk 12.0(Ubuntu 12.04)...
How to upgrade PHP to PHP 5.4 on CentOS 6 ?
View 4 Replies View RelatedI have a VPS on Webfusion which auto upgraded last night to Plesk 11.5.30 #45. However, I used to have the domain registrar, 123-reg manage my DNS & now since the upgrade I've lost access to all emails & ftp access but the domains still work ok.
whether I should delete all DNS records at 123-reg & point to my VPS now? The DNS parameters in Plesk appear to be different to 123-reg. I
Following the update from 11 to Plesk 12 (and installing latest Ubuntu fixes), the Plesk panel access is broken. Welcome page says:Can not load key: key is empty.And of course, no way to login the mgt interface. All services appear up, so this is only affecting the panel web service.
Fishing out the panel.log, it appears to be at a lower level than I initially thought (see below): experiencing issues after updating from 11 to 12 on Ubuntu (12)?
[18-May-2015 19:46:34 Europe/Berlin] PHP Warning: file_get_contents(/opt/psa/var/sso.sp.pem): failed to open stream: No such file or directory; File: /opt/psa/admin/externals/xmlseclibs.php, Line: 285
[18-May-2015 19:46:34 Europe/Berlin] Exception: PHP Warning: file_get_contents(/opt/psa/var/sso.sp.pem): failed to open stream: No such file or directory; File: /opt/psa/admin/externals/xmlseclibs.php, Line: 285
file: /opt/psa/admin/plib/Smb/Exception/Syntax.php
line: 56
[code]..
After finishing the upgrade from 11.5 to 12.0.18 I checked the system time which was wrong and no timezone was selected ....
So I switched to my timezone (GMT +3) and corrected the clock from the above settings cause it was 5 minutes behind
saved .... since then the time is showing 1 hour later the selected one. like GMT+4.
No matter if I change it manually it returns there.
in order for the server to work correctly i changed the timezone to GMT+2. OK the time is corrected - although wrong cause it should be 1 hour earlier, but anyways Now all incoming email messages still show one hour late as received date. So I tried restarting courier-imap
# service courier-imap restart
courier-imap: unrecognized service
I have upgraded from 10 to 12 and now I have "502 Bad Gateway nginx" error. I have atached logas..
View 1 Replies View RelatedAfter upgrading (i know, i should not do this) from Squeeze to Wheezy i have got a problem with subscriptions.Plesk seems to work, but whein i want do manage a domain/hosting. i just see 502 Bad Gateway nginxClick to expand...
View 7 Replies View Related is it safe to Upgrade Parallels 11.5 to 12 from the panel
OS
CentOS 5.10 (Final)
Panel version11.5.30 Update #48, last updated at Nov 21, 2014 02:33 PM
I get a blank page after upgrading to the latest version using the automatic update.
View 1 Replies View RelatedI can't install or remove anything. when i click on continue it's just refreshes the page and come backs to the list.
I have checked error log and the latest error log is ERR [panel] Specified column "isAllowed1 is not in the row.
And i don't think this error related to the problem. When I click on continue it does not create any line in the error log.
I am getting the "Function not implemented" error from /var/log/plesk/panel.log I have tried reading this article but it seems to only apply to Ubuntu and I am running CentOS 6 x64
How can I get past this error?
I have upgraded from 11.5 to 12, and now if I try to open Plesk on the port 8443 I have this error:
502 Bad Gateway
nginx
This is the log:
2014/06/27 18:25:13 [crit] 1629#0: *2 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: 79.49.206.176, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "87.106.85.233:8443"
When I click upgrade now at the plesk panel I get following error:
Parallels Panel pre-upgrade check... WARNING: The proftpd FTP service will fail to start in case the support for IPv6 is disabled on the server. Please check [URL] .... for details.
Is it safe to proceed? I guess it shall be automatically?
I noticed, that my Plesk install still runs an older Roundcube Installation (somewhere in the 0.9 range) and RoundCube 1.0.3 is currently the latest version available at [URL]
Is it safe to upgrade the Roundcube Installation in psa-roundcube manually from 0.9 to 1.0.x?
Since upgrading to 12.0.18 Update # 5 fail2ban stopped working.
Code:
[nimda4597@xxxx fail2ban]# service fail2ban status
fail2ban-server (pid 1881) is running...
Status
[Code].....
Unfortunately the encrypted FTP transfer is broken since Plesk upgraded to version 12. There are two cases:
Passiv FTP without encryption on port 21: everthing workes fine.
Passiv FTP with explicite TLS encryption on port 21: The control connection can be established by using TLS on port 21 but the data transfer can't be established by using passive mode (ETIMEDOUT - Connection attempt timed out)
I thought it could be a firewall issue but i'm currently unable to diable the firwall for testing since the configuration of the firewall is unreachable after upgrading to plesk 12! See second thread:URL....
Can't add new subscriptions or domains/ subdomain after upgrade. Upgraded to 12.0.18 today and can no longer add domains or subdomains. When I try create a new subscription I get the following error:
New configuration files for the Apache web server were not created due to the errors in configuration templates:
Template processing failed: file = /usr/local/psa/admin/conf/templates/default/domainVhost.php, error =
Template_Exception: No data. file: /usr/local/psa/admin/plib/Template/Processor.php line: 28 code: 0 Previous error: Template_Variable_Exception: No data. file: /usr/local/psa/admin/plib/Template/Variable/AbstractCachedData.php line: 67 code: 0.
Detailed error descriptions were sent to you by email. Please resolve the issues and click here to generate broken configuration files once again or here to generate all configuration files.
Trying to generate all configuration files OR generate broken configuration files doesnt work. Still get the same error.
When I try can create a subdomain I get the error:
.............
Error: proftpd-config failed: mktemp: failed to create file via template `/etc/proftpd.d/50-plesk.conf.XXXXXX': No such file or directory
Can not create temporary file
...........
This solution [URL] ..... doesnt work that just says 'ls: cannot access /etc/proftpd.d/: No such file or directory'
I tried yum update proftpd to see if that would do anything but get this...
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile
* atomic: mir01.syntis.net
193 packages excluded due to repository priority protections
Setting up Update Process
No Match for argument: proftpd
No package proftpd available.
No Packages marked for Update
In plesk, ProFTPD ftpserver is showing as installed.
I have the same problem again with plesk 11 [URL]
workaround
1) rpm -q --scripts psa-backup-manager | sed 1d | sh
2) /etc/init.d/crond restart
my error message with CentOS 5.8, Plesk 11.0.9 MU#4
sh: line 2315: syntax error near unexpected token `('
sh: line 2315: `preuninstall scriptlet (using /bin/sh):'
/etc/cron.d/plesk-backup-manager is created
why do not work after you upgrade the backup cronjobs?