I see that Plesk 12 supports MySQL 5.6, but the server I am running is Ububtu 14.04 LTS and comes with 5.5.
I need to make 5.6 available but I can see no way of doing it without breaking Plesk (I already tried just installing it from command line with apt-get install and had to restore the whole server from backup!) - there is no option for MYSQL in Plesks updates & upgrades menu ...
I have upgraded php 5.5 using below steps,
===
sudo add-apt-repository ppandrej/php5
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install php5
==
Its also upgrading Apache from 2.2 to 2.4 and after installation, it break my Apache configuration and getting configuration errors when adding domains from Plesk etc.
Is there any proper way to upgrade PHP 5.5 in Plesk 12.0(Ubuntu 12.04)...
I would like to Mysql 5.6 installed on Plesk 12. Is that possible? How does it work?
View 1 Replies View RelatedHow to upgrade mySQL from version 5.1 to version 5.5 on linux. We're running CentOS version 6.3 with Plesk 11.09.
The approach outlined here [URL] .... seems like the way to go. I want to be sure that I don't adversely affect our installation.
If it is at all relevant we're running a Joomla 2.5 site.
I'm still using Plesk 11.5.30 and MySql 5.5.39. That was discribed here how to update. But i need to have a MySql 5.6.5 (minimum) for some software (This version is over 2 years old). I'm using CentOs 6.5. and PHP 5.4.33
how to do this, whitout breaking plesk 11.5.30??
I have ubuntu 6 server version running.
I am trying to import a database I have however I cannot get it working for the last 2 hours!
I have tried various commands like logging into mysql entering the "use" command to use a database and then variations of the "source" command but my db.sql file doesn't run.
Also tried the full command
mysql -uroot -pMYPASS MYDBNAME < /var/www/site/db.sql
Neither seem to do anything.
PHPMYADMIN shows no database tables at all.
Running mySQL 5.
I am trying to transfer Plesk 12.0.18#34 from an Ubuntu 12 server to an Ubuntu 14 server.
Using the transfer manager, I got these warnings:
The following Apache modules are not installed on the destination server: authz_default. Please install and enable these modules to prevent possible problems. The following Apache modules are disabled on the destination server: roxy_http,proxy_html,proxy,authz_groupfile,reqtimeout. Please enable these modules to prevent possible problems. The php_version 5.3 is not available on the destination server. Instead, Plesk will use the following version: 5.5. To use the same php_version as on the source server, you should turn on or install it on the destination server. 3 domain(s) will be affected.
I am a bit puzzled by the authz_default warning as it is not supported anymore on Apache 2.4.
If I override and launch the transfer, I get these errors:
PHP Notice: Trying to get property of non-object; File: /opt/psa/admin/plib/backup/Conflicts/PleskDataManager.php, Line: 173
PHP Notice: Undefined index: xx.xx.xxx.202 [IP of old server]; File: /opt/psa/admin/plib/backup/Conflicts/PleskDataManager.php, Line: 180
[Code]....
Installing Plesk Panel with Spamassassin on Ubuntu 14.04 LTS gives a significant error:
Restarting SpamAssassin Mail Filter Daemon: No /usr/bin/perl found running; none killed.
server socket setup failed, retry 1: spamd: could not create IO::Socket::INET6 socket on [::1]:783: Cannot assign requested address
server socket setup failed, retry 2: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
server socket setup failed, retry 9: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
invoke-rc.d: initscript spamassassin, action "restart" failed.
dpkg: error processing package sa-compile (--configure):
even though spamassassin (i.e. spamd) is not running. The usual suspects for the before mentioned error, being
a) differences in the name of the PIDFILE variable in /etc/default/spamassassin and /etc/init.d/spamassassin
b) directory and/or file location are not readable/writable
are not causing this specific installation bug. The work-arounds:
1 - not installing spamassassin (not an option)
2 - installing spamassassin and (afterwards)
change /etc/default/spamassassin, add the option "-4" to the line OPTIONS, resulting in the line: OPTIONS="--nouser-config -4 --username=popuser --daemonize --helper-home-dir=/var/qmail --virtual-config-dir=/var/qmail/mailnames/%d/%l/.spamassassin --create-prefs --max-children=5"
run plesk-installer or autoinstaller again ..Work-around 2 works fine, after reinstallation the /etc/default/spamassassin is as it should be (note that the added "-4" is not present anymore).
The before mentioned work-around suggests some error in the installation process, very likely to be an issue with the chronological order of installation of the various components. In theory, it can be excluded that this bug/issue is caused by psa-spamassassin and/or spamassassin (version 3.3.x) packages, even though some current spamassassin bugs are known: URL....I sincerely hope that Parallels Team can investigate and patch both of the bugs/issues.
I have an old laptop with the following specification: Memory: 485 MiB, Processor: Genuine intel CPU T2300 @ 1.66 GHz ×2, OS Type: 32 bit, Disk: 78.1 GB,
I installed on it Ubuntu 12.04 LTS and I noticed that the overall system is very slow in responding. I tried to search about that in the internet and I found some articles talking about how to make Ubuntu 12.04 LTS run fast I applied all what they said including download LXDE desktop environment and then nothing different in the system response time.
Then I need to develop some android applications so, I download Android Studio (Beta) 0.8.6. The problem became worse than before whenever I tried to open the Android Studio the screen is frozen for some minutes then it took time to download the projects and initialize the work space also, when I tried to move the cursor he is move very slowly. When I tried to run my first application on the AVD it took three hours and still not run yet.
I delete the Android Studio and install it again several times, I was trying to solve the problem but still nothing change.
We've had an issue where some of our Plesk installation was trashed. It's on a server which runs multiple live sites.
Most of the psa package no longer exists.
Is there a way to re-install Plesk without making it "think" that it's a new installation, thereby preserving all data?
Would apt-get install -f psa do it?
I had a HDD crash recently on my Root Server. Replaced HDDs, installed Ubuntu 12.04 LTS, since Ubuntu 14.04 LTS is not supported by Plesk yet. Anyway...
I had 2 issues:
1) Could not create Customers, because IP Pool was empty. Changed IP Type from Dedicated to Shared. Fixed issue.
2) Cannot connect to the FTP Server using the Login Data from one of my Domains.
FlashFXP and FileZilla both show the same error, which is:
Code:
Response:220 ProFTPD 1.3.4c Server (ProFTPD) [*ip removed*]
Command:USER *user removed*
Response:331 Password required for *user removed*
Command:PASS **************
Response:530 Login incorrect.
Error:Critical error
Error:Could not connect to server
on a fresh installation of Ubuntu (at first 14.04 but on 12.04 the same problem occurs) I installed Plesk via the autoinstaller. It seems to be all fine except I cannot open Plesk in the browser.
The web browser shows "502 Bad Gateway", a look into the error_log at "/var/log/plesk/sw-cp-server" shows the following error:
Code:
2014/08/11 09:37:22 [crit] 4988#0: *4 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: xxx.xxx.xxx.xxx, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "xxx.xxx.xxx.xxx:8443"
So the problem seems to be the sw-engine service that cannot be started.
If I try to start it manually with `/etc/init.d/sw-engine start` it just fails:
Code:
* Starting Plesk engine pool manager sw-engine-fpm [fail]
Where to find any startup error log for sw-engine, where I could find any further information.
I am planning on upgrading to php 5. I really don't need to upgrade to mysql 5 but do you guys think I will face problems with PHP 5.2.9 and Mysql 4.1.20 working together...
I am planning on doing the upgrade like this (if I decide to upgrade PHP and MYSQL all together)
1. STEP
nano /etc/yum.repos.d/CentOS-Base.repo
2. STEP
change the enabled=0 to 1 as follows
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
#baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=1
gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4
priority=2
protect=1
4.STEP
yum install php-xml
5.STEP
yum update httpd* php* mysql*
and restart the server do you guys think I will face any problems.
If I am only upgrading the php to latest I am planning on doing
1.STEP
I will do the 2.STEP above
2.STEP
wget -q -O - http://www.atomicorp.com/installers/atomic.sh |sh
yum install php-xml php-pdo
yum install php-pear
mv /etc/php.ini.rpmnew /etc/php.ini
and reboot
I am planning on upgrading to php 5. I really don't need to upgrade to mysql 5 but do you guys think I will face problems with PHP 5.2.9 and Mysql 4.1.20 working together...
I am planning on doing the upgrade like this (if I decide to upgrade PHP and MYSQL all together)
1. STEP
nano /etc/yum.repos.d/CentOS-Base.repo
2. STEP
change the enabled=0 to 1 as follows
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=[url]
release=$releasever&arch=$basearch&repo=centosplus
#baseurl=[url]
gpgcheck=1
enabled=1
gpgkey=[url]
priority=2
protect=1
4.STEP
yum install php-xml
5.STEP
yum update httpd* php* mysql*
and restart the server do you guys think I will face any problems.
If I am only upgrading the php to latest I am planning on doing
1.STEP
I will do the 2.STEP above
2.STEP
wget -q -O - [url]
yum install php-xml php-pdo
yum install php-pear
mv /etc/php.ini.rpmnew /etc/php.ini
and reboot
In order to install moodle, I need to upgrade MySQL from 5.1 to 5.5. I have gone through one of the KB articles [URL], but it's not very clear.
Can I upgrade it through Add/remove Components from Install and update products just like it can be done for PHP?? I see MySQL Server 2005, 2008 and 2012,
I used the search function. Im USING UBUNTU NOT CENTOS!
I set up an virtual ubuntu Server on a Proxmox Root. I used the .iso from plesk.
Now when i tried to start installing magento, there is the message, that there is no mcrypt installed.
I installed it using php5-mcrypt its done and i can see the folders and also te mcrypt.so and so on.
When i tried to install atomic there is the message that redhead is not available at /etc/readhead...
Plesk has mysql installed with it to run properly and I need to upgrade that version to the latest. Now I am not talking about the mysql server that it provides for me to create databases on. I am talking about the version it uses to run.
View 3 Replies View RelatedWe are unable to change the view to service provider in plesk12. Only power panel seems to show up.
Tried to do a bootstrap repair but that hasn't fixed it.
Since we upgraded to Plesk 11.5 or (I'm not shure) the last Update 12, user can not import MySQL-Databases anymore.
If the user open phpMyAdmin for import and select the database and click on Ok, phpMyAdmin does nothing.
I heard that could be a problem with JQUERY and I checked the files in ParallelsadminhtdocsdomainsdatabasesphpMyAdminjsjquery and all files seems to be there.
Only if I check the source of the phpMyAdmin Import-Website it seems, there is a problem with jquery-1.6.2+fix-9521.js.
But how I can fix this problem for all Windows-Servers.
I am trying to create a database using the following method:./mysqladmin create db
But I get the following error:./mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)'
Check that mysqld is running and that the socket: '/tmp/mysql.sock' exists!
I am new to configuring mysql. I have installed it etc but not sure how to start it. I tried the following to start the server:moe@moe-desktop:/usr/local/mysql$ sudo bin/mysqld_safe --user=mysql
I have a Plesk host that I am tasked with upgrading. It started with openSUSE 11.4 on Plesk 10.4 and I have upgraded it all the way to openSUSE 12.2 on Plesk 11.09 (fixed minor issues with pop3d and mysql locking on the way). The next upgrade was supposed to be 11.5, but the option to upgrade it never shows up. I have re-instated our support license so I know the license is OK, and also checked that 11.5 supports openSUSE 12.2. The update log doesn't really tell me much either:
Code:
Release PLESK_12_1_18 contains no any build for this OS
Release PLESK_12_1_17 contains no any build for this OS
Release PLESK_12_1_16 contains no any build for this OS
Release PLESK_12_1_15 contains no any build for this OS
Release PLESK_12_1_14 contains no any build for this OS
[code]....
While running the plesk auto installer script and upgrading I get the following error.
Components validation detected at least one important issue:
Parallels Panel pre-upgrade check...
dpkg-query: no packages found matching psa-atmail
dpkg-query: no packages found matching psa-horde
dpkg-query: no packages found matching libapache2-modsecurity
WARNING: IP address registered in Plesk is invalid or broken: xxx.xxx.xxx.xxx
Panel version: 11.5.30 Update #47, last updated at June 19, 2014 07:32 AM
OS:
Distributor ID:Debian
Description:Debian GNU/Linux 7.6 (wheezy)
Release:7.6
Codename:wheezy
Upgrade log [URL] ....
we have bought Plesk 11.5 3 months ago.
Is it possible to upgrade to 12? How do I have to proceed for the upgrade?
Over the weekend, I upgraded from Plesk 10.3 to Plesk 11.5, using the updater in the control panel. Everything seemed to go well. However, this morning I've noticed that some, not all, email accounts are having trouble logging into the server to send and receive mail. Other accounts are working fine.Via POP, I get this error: -ERR Temporary problem, please try again later
Via SMTP, I get this error:
535 auth failure
I see this in the maillog:
Jun 17 07:15:05 [server] courier-pop3d: LOGIN FAILED, user=[username], ip=[::ffff:xxx.xxx.xxx.xxx]
Jun 17 07:15:05 [server] courier-pop3d: authentication error: Input/output error
And this... Jun 17 07:24:50 [server] smtp_auth: FAILED: [email address] - password incorrect from [host] [xxx.xxx.xxx.xxx]
I replaced the server name, username, host, and IP in the above.
Here are the steps I've tried so far.
- Changing the password using the control panel.
- Updating the number of daemons in authdaemonrc
- Restarting the services
I just upgraded my Plesk on Ubuntu (vServer) yesterday. But after the upgrade I couldn't login to the Panel anymore because all I get when I try to reach the panel (https://panel.examplesite.com:8443) is a white screen.
I rebooted the server and restarted the panel as well as Apache several times with no change.
How to upgrade PHP to PHP 5.4 on CentOS 6 ?
View 4 Replies View RelatedI have a VPS on Webfusion which auto upgraded last night to Plesk 11.5.30 #45. However, I used to have the domain registrar, 123-reg manage my DNS & now since the upgrade I've lost access to all emails & ftp access but the domains still work ok.
whether I should delete all DNS records at 123-reg & point to my VPS now? The DNS parameters in Plesk appear to be different to 123-reg. I
Following the update from 11 to Plesk 12 (and installing latest Ubuntu fixes), the Plesk panel access is broken. Welcome page says:Can not load key: key is empty.And of course, no way to login the mgt interface. All services appear up, so this is only affecting the panel web service.
Fishing out the panel.log, it appears to be at a lower level than I initially thought (see below): experiencing issues after updating from 11 to 12 on Ubuntu (12)?
[18-May-2015 19:46:34 Europe/Berlin] PHP Warning: file_get_contents(/opt/psa/var/sso.sp.pem): failed to open stream: No such file or directory; File: /opt/psa/admin/externals/xmlseclibs.php, Line: 285
[18-May-2015 19:46:34 Europe/Berlin] Exception: PHP Warning: file_get_contents(/opt/psa/var/sso.sp.pem): failed to open stream: No such file or directory; File: /opt/psa/admin/externals/xmlseclibs.php, Line: 285
file: /opt/psa/admin/plib/Smb/Exception/Syntax.php
line: 56
[code]..
After finishing the upgrade from 11.5 to 12.0.18 I checked the system time which was wrong and no timezone was selected ....
So I switched to my timezone (GMT +3) and corrected the clock from the above settings cause it was 5 minutes behind
saved .... since then the time is showing 1 hour later the selected one. like GMT+4.
No matter if I change it manually it returns there.
in order for the server to work correctly i changed the timezone to GMT+2. OK the time is corrected - although wrong cause it should be 1 hour earlier, but anyways Now all incoming email messages still show one hour late as received date. So I tried restarting courier-imap
# service courier-imap restart
courier-imap: unrecognized service
I have upgraded from 10 to 12 and now I have "502 Bad Gateway nginx" error. I have atached logas..
View 1 Replies View RelatedAfter upgrading (i know, i should not do this) from Squeeze to Wheezy i have got a problem with subscriptions.Plesk seems to work, but whein i want do manage a domain/hosting. i just see 502 Bad Gateway nginxClick to expand...
View 7 Replies View Related